Pelco Nail Gun PP4348 User Manual

C204M-A (11/99)  
PP4348  
Rooftop Parapet Adapter Mount  
®
IMPORTANT SAFEGUARDS AND WARNINGS  
Prior to installation and use of this product, the following WARNINGS should be observed.  
3500 Pelco Way,  
Clovis, CA 93612-5699  
USA  
1. Installation and servicing should only be done by qualified service personnel and conform  
to all local codes.  
In North America & Canada:  
Tel (800) 289-9100  
FAX (800) 289-9150  
2. Only use replacement parts recommended by Pelco.  
International Customers:  
Tel +1 (559) 292-1981  
FAX +1 (559) 348-1120  
3. Use only installation methods and materials capable of supporting four times the maxi-  
mum specified load.  
4. Use stainless steel hardware to fasten the mount to outdoor surfaces.  
5. To prevent damage from water leakage when installing a mount outdoors on a roof or  
wall, apply sealant around the bolt holes between the mount and mounting surface.  
Please thoroughly familiarize yourself with the information in this manual prior to installa-  
tion and operation.  
DESCRIPTION  
The PP4348 is a rooftop parapet mount designed for use with Legacy ® Series pan/tilts and  
enclosures. The PP4348 can also be used with the IWM Series Wall Mount and IDM4018 Wall  
Mount for pendant domes. The PP4348 mounts directly on a flat roof or smooth horizontal  
surface and supports up to 75 pounds (34 kg).  
INSTALLATION  
1. Determine the mounting location. Use the base of the mount as a template and mark the  
bolt hole positions on the mounting surface.  
2. Set the base plate to the side and prepare the bolt holes for the fasteners.  
3. Reposition the base of the PP4348  
and secure with a minimum of eight  
fasteners. To prevent water damage,  
FEEDTHROUGH  
seal the bolt holes with appropriate  
sealant. Apply sealant between the  
HOLE  
POLE ASSEMBLY  
(PP43001008WA)  
mount and the mounting surface.  
4. Route the wiring and cabling into the  
feedthrough hole in the base of the  
PP4348. Refer to Figure 1.  
5. Guide the wiring and cabling through  
the bottom of the pole assembly and  
out the feedthrough hole at the top  
of the pole assembly. Insert the pole  
assembly into the base. Install but  
do not tighten the two 1/4-20 bolts to  
secure the pole assembly.  
THREADED FOR  
1/4-20 BOLTS  
BASE  
(PP43001009WA)  
6. Attach the mount arm to the PP4348  
with the four sets of flat washers,  
lock washers, and nuts that are sup-  
plied. Refer to the instruction  
FEEDTHROUGH  
HOLE  
manual supplied with the mount arm.  
7. After ensuring the system is com-  
pletely operational, rotate the upper  
assembly into position and tighten  
the two 1/4-20 bolts to secure the  
pole assembly.  
Figure 1. PP4348 Exploded View  
 

Peavey Guitar Milano User Manual
Philips Cassette Player ND 6600 58 User Manual
Philips Food Saver M2540 User Manual
Philips Home Theater System CTS4000 User Manual
Philips Portable DVD Player PET1031 12 User Manual
Plasmon Computer Hardware FS3102 User Manual
Polaroid DVD Player PDV 0750 User Manual
Polycom Server DOC2554A User Manual
POSIFLEX Business Machines Car Video System LM 2010 User Manual
Precision Power Music Mixer MaxxBass User Manual