Pelco Pet Fence MM22 User Manual

C228M (3/99)  
MM22  
Enclosure Mount  
®
IMPORTANT SAFEGUARDS AND WARNINGS  
Prior to installation and use of this product, the following WARNINGS should be observed.  
3500 Pelco Way,  
Clovis, CA 93612-5699  
USA  
1. Installation and servicing should only be done by qualified service personnel and conform  
to all local codes.  
In North America & Canada:  
Tel (800) 289-9100  
FAX (800) 289-9150  
2. Installation shall be done in accordance with all local and national electrical and mechani-  
cal codes utilizing only approved materials.  
International Customers:  
Tel (1-559) 292-1981  
FAX (1-559) 348-1120  
3. Use only installation methods and materials capable of supporting four times the maxi-  
mum specified load.  
4. Use stainless steel hardware to fasten the mount to outdoor surfaces.  
5. To prevent damage from water leakage when installing a mount outdoors on a roof or  
wall, apply sealant around the bolt holes between the mount and mounting surface.  
The product and/or manual may bear the following marks:  
This symbol indicates that danger-  
ous voltage constituting a risk of  
electric shock is present within  
U
®
L
LISTED  
C A U T I O N :  
this unit.  
RISK OF ELECTRIC SHOCK.  
DO NOT OPEN.  
This symbol indicates that there  
are important operating and main-  
tenance instructions in the litera-  
ture accompanying this unit.  
Please thoroughly familiarize yourself with the information in this manual prior to installation  
and operation.  
DESCRIPTION  
The MM22 Pedestal/Wall Mount has been engineered for use with light-to-medium weight cam-  
eras and various Pelco enclosures having a 2-inch mounting hole pattern.  
The MM22 can be installed on a ceiling or any horizontal surface and will support up to 40  
pounds (18 kg).  
The MM22 features a fully adjustable swivel head allowing 360° horizontal movement.  
INSTALLATION  
The MM22 mount is supplied with two 1/4-20 x .625 hex head bolts for use in attaching the  
enclosure/camera to the mount.  
NOTE: Fasteners to secure the  
MM22 (4 required) to the mount-  
ing surface are not supplied.  
(Minimum 1/4-inch diameter rec-  
ommended.)  
If installing outdoors, stainless steel hardware is recommended.  
To install the mount:  
1. Drill holes in the mounting surface using the mount as a template and attach mount se-  
curely with the required fasteners.  
If you install the mount outdoors, rain water could leak through the holes for the mounting  
bolts and damage the wall. This could be a problem only if the mounting bolts go com-  
pletely through the roof or wall.  
To prevent water damage, seal the bolt holes with an appropriate sealant. Apply the seal-  
ant around the bolt holes between the mount and the mounting surface.  
CAUTION: Make cer-  
tain the mounting sur-  
face is able to support  
2. Attach the enclosure or camera securely with the two 1/4-20 hex head screws provided.  
the full load of the mount, enclo-  
sure, and camera.  
3. Loosen the hex head bolts on the swivel head and adjust for pan rotation (360°) and tilt  
angle (75° up or down). Tighten bolts and lock into place.  
 

Philips DVD Player DCD322 User Manual
Philips Electric Shaver 7110X User Manual
Philips Flat Panel Television 17PF8946 37 User Manual
Philips TV Cables SWA2103NB User Manual
Philips TV VCR Combo 14PV358 User Manual
Pico Macom Speaker System FM Stereo Audio Modulator User Manual
Polycom Server 14117800 User Manual
Poulan Snow Blower 199248 User Manual
Premier Mounts Indoor Furnishings PP FCMA User Manual
Printek Printer Mt3 II User Manual