Pelco Power Supply CM9505J User Manual

C1430M-D (8/01)  
CM9505J Junction Box  
CM9505UPS Universal Power Supply  
®
IMPORTANT SAFEGUARDS AND WARNINGS  
Prior to installation and use of this product, the following WARNINGS should be observed.  
3500 Pelco Way  
Clovis, CA 93612-5699  
USA  
1. Installation and servicing should only be done by qualified service personnel and conform  
to all local codes.  
In North America & Canada:  
Tel (800) 289-9100  
FAX (800) 289-9150  
2. Unless the unit is specifically marked as a NEMA Type 3, 3R, 3S, 4, 4X ,6 or 6P enclosure,  
it is designed for indoor use only.  
International Customers:  
Tel +1(559) 292-1981  
FAX +1(559) 348-1120  
3. To reduce risk of fire or electric shock, do not expose this product to rain or moisture.  
4. Only use replacement parts recommended by Pelco.  
The product and/or manual may bear the following marks:  
This symbol indicates that danger-  
ous voltage constituting a risk of  
electric shock is present within this  
C A U T I O N :  
unit.  
RISK OF ELECTRIC SHOCK.  
DO NOT OPEN.  
This symbol indicates that there  
are important operating and main-  
tenance instructions in the litera-  
ture accompanying this unit.  
Please thoroughly familiarize yourself with the information in this manual prior to installation and  
operation.  
DESCRIPTION  
The CM9505J Junction Box and the CM9505UPS Universal Power Supply are used with  
CM8500 and CM9500 matrix systems to allow the system keyboards to be placed at remote  
locations throughout a facility.  
The junction box can be used by itself, but in most applications is used in conjunction with the  
power supply (refer to Figure 1). When used together, the junction box allows you to convert a  
keyboard cable into a set of cabling that can be run significantly greater distances by eliminating  
the keyboard power connections and only running the data. The CM9505UPS Universal Power  
Supply reintroduces the keyboard power at the keyboard end of the cabling. For distances over  
2,000 feet (609.6 m), the CM9505UPS-422 Universal Power Supply with data repeater is recom-  
mended.  
Communication between each keyboard and the CPU consists of two RS-422 data pairs,  
+12 VDC, -12 VDC, and a ground, for a total of seven conductors. The junction boxes, power  
supplies, and keyboards are supplied with 25-foot (7.6 m) pretested interconnect cables with  
pre-assembled RJ-45 modular 8-pin male connectors.  
Models  
CM9505J  
CM9505UPS  
Junction box only, for CM8500 and CM9500 matrix system keyboards  
Power supply only, for CM8500 and CM9500 matrix system keyboards  
(UL, cUL)  
CM9505UPS-X  
Same as CM9505UPS, except 230 VAC (CE)  
CM9505UPS-422  
Same as CM9505UPS, except with data repeater function (FCC, UL, cUL)  
CM9505UPS-422X Same as CM9505UPS-422, except 230 VAC (CE)  
 
Table A. CPU and Keyboard Terminal Assignments  
CPU  
Keyboard  
Terminal  
Function  
Function  
Terminal  
1
2
3
4
5
6
7
8
Data in +  
Data in -  
-12 VDC  
+12 VDC  
Ground  
Spare  
Data out +  
Data out -  
-12 VDC  
+12 VDC  
Ground  
Spare  
Data in -  
Data in +  
1
2
3
4
5
6
7
8
Data out -  
Data out +  
4
3
5
6
7
8
2
1
Figure 2. Wall Block Terminal Assignments  
Table B. Data/Power Cable Distances  
Wire Gauge  
Feet/Meters  
14  
16  
18  
20  
22  
832 / 254  
416 / 127  
275 / 84  
166 / 51  
104 / 32  
 
REGULATORY NOTICES  
NOTE: This equipment has been tested and found to comply with the limits of a Class A digital  
device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable  
protection against harmful interference when the equipment is operated in a commercial environ-  
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not in-  
stalled and used in accordance with the instruction manual, may cause harmful interference to  
radio communications. Operation of this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct the interference at his own expense.  
PRODUCT WARRANTY AND RETURN INFORMATION  
WARRANTY  
Pelco will repair or replace, without charge, any merchandise proved defective in material or  
workmanship for a period of one year after the date of shipment.  
If  
a
warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or  
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following  
information:  
1. Model and serial number  
Exceptions to this warranty are as noted below:  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
Five years on FT/FR8000 Series fiber optic products.  
Three years on Genex® Series products (multiplexers, server, and keyboard).  
If there is a dispute regarding the warranty of a product which does not fall under the  
warranty conditions stated above, please include a written explanation with the product  
when returned.  
Three years on Camclosure® and fixed camera models, except the CC3701H-2,  
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera models,  
which have a five-year warranty.  
Method of return shipment shall be the same or equal to the method by which the item was  
received by Pelco.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series  
fixed dome products.  
RETURNS  
In order to expedite parts returned to the factory for repair or credit, please call the factory at  
(800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if returned  
for credit, and RA number if returned for repair).  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, including when used in  
continuous motion applications.  
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing  
charge.  
Eighteen months on DX Series digital video recorders, NVR300 Series network video  
recorders, and EnduraSeries distributed network-based video products.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA  
number and freight should be prepaid. Ship to the appropriate address below.  
One year (except video heads) on video cassette recorders (VCRs). Video heads will be  
covered for a period of six months.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods to:  
Six months on all pan and tilts, scanners or preset lenses used in continuous motion  
applications (that is, preset scan, tour and auto scan modes).  
Service Department  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco  
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,  
California. Repairs made necessary by reason of misuse, alteration, normal wear, or accident  
are not covered under this warranty.  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are  
instructed to return goods to the USA, you may do one of the following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting from  
the specific use or application made of the Products. Pelcos liability for any claim, whether  
based on breach of contract, negligence, infringement of any rights of any party or product  
liability, relating to the Products shall not exceed the price paid by the Dealer to Pelco for  
such Products. In no event will Pelco be liable for any special, incidental or consequential  
damages (including loss of use, loss of profit and claims of third parties) however caused,  
whether by the negligence of Pelco or otherwise.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco c/o Expeditors  
473 Eccles Avenue  
The above warranty provides the Dealer with specific legal rights. The Dealer may also have  
additional rights, which are subject to variation from state to state.  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
REVISION HISTORY  
Manual # Date  
C1430M  
Comments  
Original version.  
C1430M-A  
C1430M-B  
C1430M-C  
C1430M-D  
11/98  
7/99  
6/01  
8/01  
Changed manual to new format. Revised installation instructions and added Figure 4 per PAR #98019.  
Incorporated ECO 99-4999 . Updated to new format.  
Revised to include safety warning and updated warranty information.  
Revised to include UL and cUL markings.  
® Pelco, the Pelco logo, Spectra, Genex, Legacy, and PelcoVision are registered trademarks of Pelco.  
™ Esprit and Camclosure are trademarks of Pelco.  
© Copyright 2001, Pelco.  
All rights reserved.  
 

Pelco Computer Monitor C1909M User Manual
Philips Cassette Player AQ6492 User Manual
Philips Coffeemaker HD8855 User Manual
Philips Cordless Telephone DECT5211S User Manual
Philips Digital Photo Frame SPF2307 User Manual
Philips Portable CD Player AQ6421 18 User Manual
Pioneer Car Stereo System DEH P3100UB User Manual
Planar Car Video System PXL2760MW User Manual
POSIFLEX Business Machines Cash Register CR 2200 User Manual
Poulan Tiller FN620L User Manual