Pelco Security Camera PS7 24 User Manual

C350SM (10/99)  
PS7 and PS7-24  
Light-Duty Scanners  
This maintenance/service manual consists of an exploded assembly diagram, wiring diagrams,  
and parts lists. Use this manual when ordering replacement parts for PS7/PS7-24 Scanners.  
3500 Pelco Way,  
Clovis, CA 93612-5699  
USA  
MAINTENANCE  
In North America & Canada:  
Tel (800) 289-9100  
Under normal operating conditions and usage, maintenance of this equipment is not necessary.  
The scanners in the PS7 Series require no lubrication, and the motors are both clutch and im-  
pedance protected from overload. The outside of the scanner may be cleaned by wiping with a  
dry cloth or spraying with clean air pressure. Do not use spray cleaners or water.  
FAX (800) 289-9150  
International Customers:  
Tel +1 (559) 292-1981  
FAX +1 (559) 348-1120  
 
PS7 and PS7-24 Parts List  
Item  
Qty  
Description  
Part Number  
1
2
3
4
5
6
7
2
2
1
2
1
1
1
Pan limit stop  
58010006  
Clutch  
PS710000  
Drag clutch  
PS710002  
Limit friction disk  
Switch actuator  
Switch bracket  
PC board assembly  
120 VAC (model PS7)  
24 VAC (model PS7-24)  
Switch  
PS710001  
PS74015COMP  
PS74016COMP  
PS71004COMP  
PS71003COMP  
SWI11-314  
8
1
1
1
1
1
1
1
4
1
1
1
1
1
2
1
1
1
9
Rubber grommet  
Bottom plate  
Top plate  
GRO2170  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
PS74100COMP  
PS74101COMP  
PS74002  
Body  
Limit support  
Mounting plate  
Spacer  
PS74003COMP  
PS74004COMP  
ZH30-0202-0404  
PS74009COMP  
PS74011COMP  
PS74012COMP  
PS74134COMP  
PS76000  
Pressure plate  
Thrust collar  
Bearing holder  
Tilt table  
Bearing  
Washer  
PS76001  
Spring  
PS76002  
Spring  
PS76003  
Motor  
120 VAC (PS7)  
24 VAC (PS7-24)  
Spacer, threaded 6-32 x 2.50 round  
2708000  
PS78001  
SPA1857  
25  
2
A
B
C
D
E
F
G
H
I
1
Nut, 10-32  
ZH10-32NUTSH  
ZH10-32X.312S  
ZH10-32X.375SPP  
ZH10-32X.500SPP  
ZH10-32X1.00SFP  
ZH10LWSIS  
3
Set screw, 10-32 x .3125-inch  
5
Screw, 10-32 x .375-inch, Phillips, pan head  
Screw, 10-32 x .5-inch, Phillips, pan head  
Screw, 10-32 x 1-inch, Phillips, flat head  
Internal tooth lock washer, #10  
1
2
7
2
Screw, 2-56 x .75-inch, Phillips, pan head  
Set screw, 6-32 x .1875-inch  
ZH2-56X.750SRS  
ZH6-32X.187S  
2
6
Screw, 6-32 x .375-inch slot, flat head  
Screw, 6-32 x .375-inch, Phillips, pan head  
Internal tooth lock washer, #6 (not shown)  
ZH6-32X.375SFP  
ZH6-32X.375SPP  
ZH6LWSIS  
J
6
L
2
Not used  
2
M
N
Screw, 10-32 x .75-inch Phillips, flat head  
ZH10-32X.750SFP  
 
WIRING DIAGRAMS  
PS7 WIRING DIAGRAM  
PS7-24 WIRING DIAGRAM  
WARRANTY AND RETURN INFORMATION  
WARRANTY  
If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or  
(559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following  
information:  
Pelco will repair or replace, without charge, any merchandise proved defective in material  
or workmanship for a period of one year after the date of shipment.  
Exceptions to this warranty are as noted below:  
1. Model and serial number  
2. Date of shipment, P.O. number, Sales Order number, or Pelco invoice number  
3. Details of the defect or problem  
• Five years on FT/FR8000 Series fiber optic products.  
• Three years on Genex® Series products (multiplexers, server, and keyboard).  
• Three years on Camclosure® and fixed camera models, except the CC3701H-2,  
CC3701H-2X, CC3751H-2, CC3651H-2X, MC3651H-2, and MC3651H-2X camera  
models, which have a five-year warranty.  
If there is a dispute regarding the warranty of a product which does not fall under the  
warranty conditions stated above, please include a written explanation with the product  
when returned.  
Two years on standard motorized or fixed focal length lenses.  
Two years on Legacy®, CM6700/CM6800/CM9700 Series matrix, and DF5/DF8 Series  
fixed dome products.  
Method of return shipment shall be the same or equal to the method by which the item  
was received by Pelco.  
RETURNS  
Two years on Spectra®, Esprit®, ExSite, and PS20 scanners, including when used in  
continuous motion applications.  
In order to expedite parts returned to the factory for repair or credit, please call the factory  
at (800) 289-9100 or (559) 292-1981 to obtain an authorization number (CA number if  
returned for credit, and RA number if returned for repair).  
All merchandise returned for credit may be subject to a 20% restocking and refurbishing  
charge.  
Two years on Esprit® and WW5700 Series window wiper (excluding wiper blades).  
• Eighteen months on DX Series digital video recorders, NVR300 Series network video  
recorders, and Endura™ Series distributed network-based video products.months on DX  
Series digital video recorders, NVR300 Series network video recorders, EnduraSeries  
distributed network-based video products, and TW3000 Series twisted pair transmission  
products.  
Goods returned for repair or credit should be clearly identified with the assigned CA or RA  
number and freight should be prepaid. Ship to the appropriate address below.  
If you are located within the continental U.S., Alaska, Hawaii or Puerto Rico, send goods  
to:  
• One year (except video heads) on video cassette recorders (VCRs). Video heads will be  
covered for a period of six months.  
Service Department  
Pelco  
• Six months on all pan and tilts, scanners or preset lenses used in continuous motion  
applications (that is, preset scan, tour and auto scan modes).  
3500 Pelco Way  
Clovis, CA 93612-5699  
Pelco will warrant all replacement parts and repairs for 90 days from the date of Pelco  
shipment. All goods requiring warranty repair shall be sent freight prepaid to Pelco, Clovis,  
California. Repairs made necessary by reason of misuse, alteration, normal wear, or  
accident are not covered under this warranty.  
If you are located outside the continental U.S., Alaska, Hawaii or Puerto Rico and are  
instructed to return goods to the USA, you may do one of the following:  
If the goods are to be sent by a COURIER SERVICE, send the goods to:  
Pelco assumes no risk and shall be subject to no liability for damages or loss resulting  
from the specific use or application made of the Products. Pelco’s liability for any claim,  
whether based on breach of contract, negligence, infringement of any rights of any party  
or product liability, relating to the Products shall not exceed the price paid by the Dealer to  
Pelco for such Products. In no event will Pelco be liable for any special, incidental or  
consequential damages (including loss of use, loss of profit and claims of third parties)  
however caused, whether by the negligence of Pelco or otherwise.  
Pelco  
3500 Pelco Way  
Clovis, CA 93612-5699 USA  
If the goods are to be sent by a FREIGHT FORWARDER, send the goods to:  
Pelco c/o Expeditors  
473 Eccles Avenue  
South San Francisco, CA 94080 USA  
Phone: 650-737-1700  
Fax: 650-737-0933  
The above warranty provides the Dealer with specific legal rights. The Dealer may also  
have additional rights, which are subject to variation from state to state.  
REVISION HISTORY  
Manual # Date  
C350SM 10/99  
Comments  
Original version.  
® Pelco, the Pelco logo, Spectra, Esprit, Genex, Legacy, and Camclosure are registered trademarks of Pelco.  
™ Endura and ExSite are trademarks of Pelco. © Copyright 1999, Pelco. All rights reserved.  
 

Peavey Home Security System U7 User Manual
Pelco TV Mount EA4348 User Manual
Pentax Digital Camera 16926 User Manual
Philips Baby Accessories SC280 User Manual
Philips Computer Drive VR 170 User Manual
Pioneer CD Player DEH 2130R User Manual
Pioneer DJ Equipment DDJ WEGO2 User Manual
Planet Technology Network Router XRT 501 User Manual
Poulan Trimmer GHT 180 LE User Manual
Precor Treadmill C962i User Manual