Performance Teknique Car Stereo System ICBM 1 TOUCH User Manual

An American Ingenuity  
OPERATING INSTRUCTIONS  
BEFORE OPREATING THE UNIT PLEASE READ THIS MANUAL  
THOROUGHLY AND RETAIN FOR FUTURE REFEENCE  
OWENER S RECORD  
THE MODE AND SERIAL NUMBERS ARE LOCATED ON  
THE BOTTON. RECORD THE SERIAL NUMBER IN THE  
SPACE PROVIDED BELOW.  
WARNING HAZARD  
DO NOT OPERATE THIS UNIT UNLESS VEHICLE IS  
PARKED IN SAFE AND LEGAL AREA.  
ICBM-1-TOUCH  
 
Matters to Note:  
Matters to Note  
Matters to note:  
Installation  
Qualified Technicians or Repairmen are expected to install the DVD.  
Improper Installation may lead to creepage or short circuit.  
To avoid injury or any accident, please read carefully the following remindings  
before installing andoperating this machine.  
Please check connections first when it does not work well. Ifconnections  
are all right, check the fuse then.  
On Safety  
Please comply with the traffic rules in your country.  
Replace the fuse  
Don't watch or operate the monitor while driving, which may distract you  
and result inaccident.  
Fuses in the same specification (current)are required to replace the  
original one.  
It is verydangerous to usefuses in different specifications orwires, which  
may damage themachine severely.  
Park your carin a safeplace before watchingthe monitor andoperate this  
machine.  
Prevent the Surface from Destroying  
Don't put yourhands, fingers orother things inthis machine while  
operating, which mayhurt you ordestroy the machine.  
Keep the machine surface away from chemicals like pesticide,fixature,or  
insectifuge, which may distorting the surface..  
Put small hardware in places where children cannot reach.  
Don't put rubberor plastic itemstogether with themachine for along time,  
otherwise the surface lacquer will be destroyed; it may also lead to fire or  
other accidents.  
On thunder-storm days, don't touchTV antenna and monitor atthe same  
time, which may bring you an electric shock.  
Turn the power switch toOFF while installingthe machine, otherwiseit  
may lead tocreepage or shortcircuit.  
Don't let theaiguille destroy anycar parts, likepipes, oil boxor other  
circuitries.  
Set in sunshine, the car's interiortemperature will risequickly, cool it  
before operating thismachine.  
TV/AV pictures will not show until the car has been stopped and braked.  
Don't watch itwhile driving, otherwisetraffic accident may occur dueto  
your distraction.  
Dew condensation  
If the temperature changes too quickly, there may appear dewfall in the  
display screen.It willbe all right soon whenthe humidity vaporizes.  
Remember to fastenyour safety beltwhile driving, otherwisethe probable  
hurt will bemuch worse ifthere is anaccident.  
If you have any doubts or questions, please consult the dealer nearest to you.  
About the Machine  
Applicable Disks  
All DVD, VCD and CD bearing the following symbols can be played in  
this machine.  
Installing Location  
Do not install this in machine where  
The drivers' view mey be obstructed.  
The operation of the car or the airbag system will be obstructed.  
It will obstruct the operation of the car, especially the steerwheel, shift  
lever and brakepedal.  
DVD Region Code  
DVD Disks with incompatible region code cannot be played (this machine is  
for all code.)  
1
2
 
Matters to Note  
Matters to Note  
Reset the micro-processor  
The Use and Maintenance of Remote Control  
Replacing the Lithium Battery  
Press RESET to initialize the micro-processor.  
The reset operation is needed only when:  
The machine is used for the first time after installation.  
This machine does not workwell.  
Normally, the battery can last for about 1 year. (Its lifespan may be  
shortened due to different working conditions.When the battery power  
becomes weak, its function will be narrowed.Replace it with a new Cr2025.  
Abnormal or incorrect information appears in the monitor.  
Precautions  
1
2
Turn the power switch toOFF.  
Keep the battery out of the reach of children. Should the battery be swallowed,  
consult doctors immediately.  
Press RESET with penpoint orother pointed objects.  
Wipe the battery with dry cloth to assure a good contact.  
Please insert the battery with correct polarity  
Do not hold the battery with metallic tweezers, otherwise a short-circuit  
may occur.  
Precautions:  
The battery may explode if mistreated. Do not recharge, disassemble the battery or  
put it in fire.  
Installing Steps  
Take outthe projecting slice at the bottom ofthe card batterywhen it is used for  
the first time.  
Precautions  
Please turn the power switch to OFF before you press RESET when completing  
the connection orall the memorieshave been lostand need areset.  
Take out the battery buckle  
Press the battery buckle and pull it out.  
Replace the battery  
Put the battery in the buckle with its anode upward  
Insert the battery buckle  
Push the buckle to its original  
position.  
Back of the remote  
Battery tank  
Battery  
Transparent slice  
3
4
 
Connection Instructions  
Connection Instructions  
AV Output  
Red  
White  
Yellow  
FL  
FR  
Backing Radar  
TV Antenna  
Radio Antenna  
VIDEO  
White  
Grey  
FR  
FL  
RR  
SWR VIDEO  
Front  
Left  
Front  
Right  
Purple  
Green  
Back  
Back  
Optical Output  
R
W
Y
AUX Input  
CDC  
RL SWL  
Blue&Whitel Hand Brake  
Lens  
RL  
RR  
Blue  
Backing  
Brown  
Power Amplfier Control  
Orange  
Black  
Red  
Power Antenna  
Ground Wire  
ACC  
SWL  
SWR  
Yellow  
BATT  
5
6
 
Touch Key Functions  
Touch Key Functions  
2
Touch Key  
Sound Menu Function Key  
2
Touch this key, and the sound menu will appear.Any item inthis  
menu can be touched and selected freely.BASS, TREBLE,  
BALANCE and FADER can all be adjusted. While adjusting  
BALANCE or FADER,one can use the demonstrated arrowhead;  
when the cursor changes from pink to green,it means the sound  
field is located in central position.  
MODE  
MUTE  
18  
19  
EQ  
4
3
17  
16  
5
6
EJECT  
20  
15  
+
MENU  
21  
22  
10  
SOUND  
MENU  
9
2
1
14  
13  
DISP  
23  
24  
ANG  
12  
11  
7
8
BASS  
SRC  
TREBLE  
BALANCE  
ICBM-1-TOUCH  
FADER  
+
Touch Key Functions:  
Notes: Touch Keys 1 2  
they will not be valid until there is no menu display.Keys 4 8  
3
5
6
7 are used to activate menus,  
EXIT  
NEXT  
9
10 are valid as soon as the machine is on.  
1
1 Touch Key  
SRC(Vedio source)Function Key  
+3  
-
+
This key is valid only when the machine is on. Touch it, and the  
following menu will appear. Touch and select one, the machine  
will change to that play source. The machine will enter the  
highlighted item 2 seconds later if there is no further operations.  
3
Touch Key  
Sound Pattern  
3
Touch this key and Sound Pattern Menu will appear.Touch and select  
wanted sound pattern. Patterns like ROCK STANDARD, CLASSICL  
JAZZ have been preset.  
AUX  
TUNER  
DVD  
CDC  
EQUALIZER  
LAST  
ROCK  
TV  
STANDARD  
CLASSICAL  
JAZZ  
EXIT  
EXIT  
8
7
 
Touch Key Functions  
Touch Key Functions  
4
5
Keys  
Monitor Angel Adjusting  
4 8  
System Menu Page 1  
Press and  
4
toadjust the monitorangels within itsvariation scope.  
8
Key  
Picture Mode Menu  
5
BRIGHT  
CONTRAST  
COLOR  
PIC  
SETUP  
MODE  
Touch this key toactivate picture modemenu.Touch and select wanted  
picture mode. Fourmodes are presethere:  
RESET  
LAST  
STANDARD,NIGHT,CUSTOM,and BRIGHTNESS.  
NEXT  
EXIT  
PIC MODE  
LAST  
CUSTOM  
NIGHT  
15  
-
+
STANDARD  
BRIGHT  
EXIT  
System Menu Page 2  
6
Key  
System Menu  
6
Touch this key to activate System Menu, which has 3 pages, each item of  
MIRROR  
BLUE  
PIC  
the menu canbe touched andselected freely.  
SETUP  
MODE  
Among them are PIC item on page 1:  
CLOCK  
TUNE  
BRIGHT  
CONTRAST  
COLOR  
LAST  
NEXT  
RESET  
EXIT  
and SETUP item on page 2:  
MIRROR  
BLUE  
CLOCK  
TUNE  
and MODEitem on page 3:  
Picture Modes  
10  
9
 
Key Functions  
Key Functions  
9
Keys 20 and 22  
Menu Adjusting  
7
Funciton Touch Key  
7
Touch this key, different menus will appear in different program sources  
(DVD,CDC,TV .Please refer to related chapter.  
Adjust relevant menu item when there is a menu display. If no  
menu display, they will change between TV and RADIO,change  
music in CDC mode,and function as Fast Play in DVD mode.  
10  
Touch Keys 9  
Touch these keys to increase or decrease the volume.  
Key 11 SRC (video sources  
Volume Adjusting  
Key 21  
MENU(Main Menu)  
1
2
Same as the Main Menu Touch Key  
On idle state, this key will display SRC menu (power on).In practice, this  
key is long-pressed to turn off the machine (OFF). Other functions of this  
key is the same as Touch Key SRC.  
11 Key 23  
DISP(Display  
This key functions differently under different states:  
DVD state: Turn on/off DVD OSD display  
CDC state: Turn on/off CDC information display  
Idle state: Check and adjust time  
Key 12  
ANG(angel  
Press this key on power-on state, the angel of the monitor will change within the  
scope of Minimum and Maximum angel until the key is let go.  
Keys 13 and 15 (VOL)  
Volume and Sound Adjusting  
12 Key 24  
IRRX Window  
Press Left to decrease, press Right to increase when power is on until the  
key is let loose..  
Never cover this window, avoiding the malfunction of remote operations.  
4
Key 14  
SOUND MENU  
The function of this key is the same as Touch Key 2 (sound menu).  
Key 16  
EJECT (DVD eject key)  
5
In standby state, press the key to enter DVD mode. The DVD disc  
shall eject automatically. In other state, press the key to enter DVD  
mode automatically the DVD disc shall eject automatically. During  
the process of eject, if the display block the disc eject, the display shall  
descend to a proper position to ensure the eject. (If the display has  
descended, it will go back to the original position before eject by  
pressing the ANG key for the first time.)  
Precaution: Don't press the ANG key until the disc enters the machine  
completely.  
6
8
Key 17  
Its function is the same as Touch Key 3 (sound pattern)  
Key 18 MODE(picture modes)  
Its function is the same as Touch Key 5 (picture modes)  
Key 19 MUTE  
Turn on and off the sound  
EQ(sound patterns)  
11  
12  
 
Keys on Remote Controller  
Keys on Remote Controller  
19 MENU (main menu)  
ANGLE  
POWER  
MODE  
6
7
Menu Selection(+)  
20 ENTER(setting  
DISP  
SRC(Playing Source)  
The machine will be on once  
10+  
Confirm in DVD mode,(long-press it DVD menu)  
Save in TV and RADIO mode.  
21 Menu Select  
the playing source is selected.  
This key can switch among DVD,  
CDC, AUXand TV.The machine  
will enter the selected item if  
there is no further operating for 2s  
The machine will be OFF if this  
key is pressed for over 2s.  
PAUSE  
PLAY  
22 GOTO(switch to DVD)  
SRC  
AUX  
Press this keyand input numberand press confirmkey, the program  
will switched to relevant position.  
23 EQ  
ENTER  
8
9
Menu Selection(-)  
AS  
SET  
SOUND  
BAND Key  
Press this keyto select different modes:  
This Key canbe switch between  
MONO  
13  
FM1 FM2 and AM,a long press  
means AS of FM.  
STANDARD  
JAZZ CLASSICAL ROCK  
Lp2508  
24 REPEAT  
10 Volume(+)  
1
POWER  
Long-press Key 5, can repeat playback when playing a DVD.  
11 SOUND  
Press it to switch off the machine  
Press this key can switch  
between Low,High, Balance and  
Fader.  
and the monitor will retract to the  
MIN angel.Press it to start the system  
on idle state, and the monitor angel  
will rebound.  
25 SOUND CHANNEL SWITCH  
Long-press key 7 to switch sound channels:  
12 VOLUME(-  
R+R  
L+L  
STEREO  
13 MUTE  
2
MODE  
26 AC3/DTS SWITCH  
Press this key to switch  
between Mute and Sound  
14 ANGLE  
Press it to select different preset  
pic modes:STANDARD, SOFTNESS  
CUSTOM, and BRIGHT.  
Long-press Key 8, it will change between Ac3 and DTS  
27 TITLE SWTICH  
Change the angel of LCD panel  
15 Information Display  
17 AUX(auxiliary input  
Press it to swithc between  
AUX and CAMERA  
18 Menu Adjustmeng(+)  
3
Number Keys  
long-press 0 means 10  
PLAY  
Long -press key 9,it will change the title.  
4
Put in disks, and press this key  
Notes  
to play; long-press it to PAUSE.  
5
16 CHANNEL(+/-)  
Some keys are valid only in specific situations  
Long-press means to press the key over 2 seconds  
Change music in DVD mode,  
change disks in CDC and change  
channels in TV/RADIO mode.  
13  
14  
 
Basic Operations:  
Basic Operations  
Adjust the Monitor Angel:  
SRC Functions  
Press ANG key on the monitor panel, the monitor will move within  
the minimum and maximum angels, until the key is let off.  
If it is a short press, the monitor will be slightly adjusted following  
its original direction.  
The machine is on once the playing source has been selected Press this key  
to switch between the following playing sources:  
1.AUX  
2.CDC  
Select Auxiliary Input  
Select Disk Input  
Touch the angel adjusting area on the monitor panel, area (4) is to  
increase the angel, and area (8) is to decrease.  
3.TUNER Select Radio, and radio menu will be displayed  
4.TV  
Select TV Input  
Precautions:  
5.DVD  
6.EXIT  
Select DVD Input  
Exit, Close the System  
While adjusting the angel of the monitor panel, press ANG key  
or touch the angel adjusting area. Do not move or press the  
monitor by hand, or serious damage may occur.  
The playing sources can be selected through touching directly,  
and the system will enter the highlighted item if there is no selection  
after 2 seconds.  
Playing DVD:  
Turn Off the Machine:  
Press SRC to select DVD, insert valid disk in the disk box.  
Insert valid disk in the disk box directly. When the DVD playing  
menu appear, press PLAY (or SET) key, the systemwill play thedisk  
automatically. If you want to exit, press EJECT.  
Long-press SRC key,OFF will appear and the system closed.  
Press SRC, touch menu will appear, select EXIT.  
Switch off ACC power source.  
Precautions  
The monitor will retract automatically to the minimum angel.  
The machine will retract automatically and close 5 seconds later  
if the power switch is turned from ON to OFF.  
Precautions:  
The system can play one 12cm or 8cm DVD disk (single-sided)  
Please do not use adapters while playing 8cm disks.  
Do not insert anything except disks in the disk box.  
If you can'tinsert a whiledisk, or itcannot be played, please check  
whether the labelside is upward. Press EJECT to take outthe disk tosee  
whether there is any damage before inserting it again.  
If DVD indicator displays RED, it means there is no disk in the box.  
If it isblue, it meansthere is adisk. Do notinsert diskforcefully in  
this situation, so as not to harm the interior devices..  
When the power switch is turned to ON or ACC again, the system  
will reset automatically and rebound to its previous status.  
When the system is turned off, pls make sure all the panels are  
closed. If the closing of the monitor stops for some obstacle and  
nothing is done to change it, damage may occur.  
Volume Adjusting  
1.Use the Volume key onthe host panel.  
2.Touch the volume adjustingarea  
3.Use the Volume key onthe remote controller  
15  
16  
 
Tuner  
Tuner  
Listen to the Radio:  
Basic Operations:  
Advanced Function Operations  
1
Semi-automatic Seeking  
Press menu adjustingkeys on remotecontroller for 2seconds or touch  
Change Bands  
the semi-automatic seekingarea on thescreen, the systemwill begin to  
seek proper frequency. Current frequency will be displayed.  
Press BAND repeatedlyuntil you find needed band.  
Touch current band area to change the band.  
The following bands will bedisplayed in turn: FM1--FM2---AM  
2
Automatic Seeking  
Press BAND button for about 2seconds or touchthe Automatic Seek  
Use the Preset Radio Stations  
Select with number keys on the remote controller  
Directly touch the memory radio stations  
-ing area onthe screen(ASM),the systemwill seek channelsautomatically  
starting from 87Mhz until the memorizeris full(20 channels)orreaches  
the highest frequencyof 108MHz.  
3
Manual Storage  
Fine Frequency Adjustment  
Press SET(or ENTER on the remote)when the best frequency is found  
Use menu adjusting keys on the remote controller  
Directly touch fine adjustment area on the screen  
and current frequencydisplay will glitter.Select storage locationwith  
CH+,CH- and thenpress SET(or ENTER)to store it.  
Touch current frequency, it willglitter and thecolor turns toRED. Touch  
and select storage location, then touch current frequency, it will stop glittering  
and be stored.  
Fine  
Adjustment+  
Fine  
Adjustment-  
Current  
Frequency  
Current  
Band  
Precautions:  
TUNER  
08 08  
1
2
3
4
Press any key to stop auto seeking.  
BAND FM1  
89.30MHz  
This machine canpreset 30 chnnels,10for Fm1 andFm2 respectively.  
Automatic seeking is valid only for FM.  
0: 87.00MHz  
1: 88.00MHz  
2: 89.00MHz  
3: 90.00MHz  
4: 92.00MHz  
5: 94.00MHz  
6: 96.00MHz  
7: 98.00MHz  
8:100.00MHz  
9:108.00MHz  
During manual storage, no other key operation is permitted when the  
ASM  
display content is glittering.  
Automatic Seeking  
Semi-automatic Seeking  
Preset channels  
Preset channels  
18  
17  
 
DVD Playing  
DVD Playing  
DVD Function Operations  
1 DVD Playing and Pausing  
To Operate with remote controller  
Press PLAY on the remote to play,long-press it to pause.  
Touch PLAYto play disks.  
To useTouch Key Functions:  
Press the function keys area, the following 2 pages information about touch  
Press PLAY again to stop PAUSE and continue to play.  
keys will be displayed.  
2 DVD Stop Playing  
OSD Info  
DVD Info  
DVD Function Keys page 1  
Touch STOP key to stop playing.  
3 Backward and Forward  
DVD  
01:08:08  
T:08  
01:08:08  
Press menu adjusting keys on the remote or touch keys  
and  
when  
DVD is playing to Backward or Forward. Press PLAY to resume playing.  
EXIT  
Music Selection  
OK  
PLAY  
While playing, press menu adjusting keys or touch keys  
play the previous or next item.  
and  
to  
STOP  
NEXT  
5 Skip to designated item  
DISP  
INFO  
SET  
Press GOTO once,the following will be displayed:  
Title  
01 / 02 Chapter  
008 / 020  
Current title  
Totalitems  
Totaltitles  
Current item  
DVD Function Keys page 2  
Input wanted skip number and press OK,DVD will switch to play  
relevant music item. If the number is over 10, press 10+first, then  
press other numbers. For example, press 10+ twice, and then press  
8 to get 28.  
DVD  
01:08:08  
T:08  
1:08:08  
+
EXIT  
MENU  
TITLE  
NEXT  
0
2
5
8
10  
3
GOTO  
.Skip to Designated Time  
1
4
7
Press GOTO twice, the following will be displayed:  
6
Title  
01 / 02  
Time -- : -- : --  
9
Current item Totalitems  
OK  
Input the time and press OK, DVD will continue to play from relevant time.  
19  
20  
 
DVD Playing  
DVD Setup  
The Main Page of DVD Setup  
7
8
9
DVD Information Display  
Touch key INFO can control the way of DVD info display.  
Long-press ENTER on the remote or touch SET in DVD operation menu to  
perform general setup, speaker setup, audio setup etc.  
OSD Info Display  
Touch key DISP can control the way of OSD info display.  
Setup Menu---Main Page  
DVD Playing Menu  
General setup  
Speaker setup  
Touch key MENU can activate DVD menu; touch direction keys  
and OK to play DVD.  
Audio setup  
Kara OK setup  
Initial setup  
9
DVD Title  
Touch TITLE to come back to DVD title menu.  
Exit  
Precautions:  
1
Since there is2 pages oftouch menu,LAST and NEXT has to beused to  
select relevant page, press EXIT to exit the menu.  
General Setup  
2
3
The above operations and information will vary a little due to different disks.  
Due toits special savingformat, special operationsare needed while  
playing MP3.  
In the setup mainpage, select General Setup through direction keys, press  
ENTER on the remote or touch SET to enter General Setup page as follows:  
To play Mp3 from designated folder:  
Move cursor todesignated folder throughdirection keys, pressOK  
to enter this folder and select files from it through direction keys.  
PIC Mode  
Angel Label  
English  
Chinese  
Russian  
Language  
Hide Caption  
Screen Savers  
Mainpage  
21  
CHN  
21  
22  
 
Initial Setup  
Speaker Setup  
Select Initial Setup through direction keys on the mainpage, press SET or  
touch SET to enter Initial Setup page as follows:  
On Setup Mainpage, select Speaker Setup through direction keys, press SET  
or touch OK to enter Speaker Setup page as follows:  
TV Form  
TV PAL  
A U T O  
N T S C  
P A L  
Center Speaker  
Rear Speaker  
Bass Speaker  
Center Delay  
Rear Delay  
S t e r e o  
Vedio Output  
Sound  
5 . 1 T r a c k  
Caption  
Disk Menu Language  
Age Control  
Password  
Tone Test  
Audio Setup  
Precautions:  
Select Audio Setup through direction keys on the mainpage, press SET or  
touch OK to enter Audio Setup page as follows:  
1
2
Touch Direction Keys (or menu selection keys on the remote) are used  
in DVD setup;  
Normally, do not change the initial setup;  
O F F  
SPDIF OUTPUT  
L
Simulating Audio Output is prohibited once SPDIF output is selected;  
This machine supports PAL and NTSC, so try to use NTSC;  
The default OSD language is English, and the PAL and NTSC tv tuner;  
Karaoke function is not set, do not set Karaoke menu;  
The initial password is 8888;  
R
S P D I F / s o u r c e c o d e  
S P D I F / P C M  
Compression of Dynamic Range  
Audio Setup  
LPCM Output  
As long as disks are inserted, the machine will be in DVD playing mode.  
Precautions In AudioSetup, SPDIF OUTPUT controls simulating  
output or opticaloutput, and simulatingaudio output isprohibited where optical  
output exists.  
s long as  
is pressed, the machine will convert to DVD mode,  
relevant information will be displayed and disks are ejected automatically.  
23  
24  
 
TV  
Press the Function Touch Area on the monitor, the following TV  
touch keys will be displayed:  
Press function touch area on the monitor, the following CDC touch  
keys will be displayed:  
-
+
DISC  
1
10  
2
DISC  
EXIT  
-
CH+  
CH  
1
0
2
5
8
3
6
9
3
6
9
TUNE  
4
7
5
STORE  
4
7
8
-
+
EXIT  
PLAY  
Playlist Selection  
Touch  
and  
, or press menu adjusting keys on the remote to  
1 Automatic Seeking  
select Previous or Next item on the playlist.  
Forward and Backward  
In TV Mode, select TUNE from the System Setup, or press touch keys  
and touch TUNE, the system will start to seek automatically from VIF.  
The seeking will not stop until the stored channels reach 100. Press any  
key or touch any valid place on the touch screen will terminate the seeking.  
The first saved channel will be used after the seeking.  
Press  
, the system will go forward or backward, relevant  
information will be given. Press the button again, stop  
Forward or Backward.  
Replace the disk by hand  
Touch DISC or press  
on the remoter to play previous or  
next disk. Press the number keys on the remote to play disk with  
designated number; if the disks have not numbers, the system will  
just play the next one by sequence.  
SEARCHING  
02  
Automatic Replacement of Disks  
he system will select next disk when the former one has been finished.  
Precautions:  
When the multi-disk CD player is ready, READY will be displayed.  
If the CD player can't work well, ERROR will be displayed.  
If the disk case is taken out, NO MAG will be displayed.  
If the case is in the box but there is no disk, NO DISK will be displayed.  
VLF  
30  
Press PLAY if it does not play automatically after replacing the disk.  
25  
26  
 
TV  
Clock  
Check the clock when the machine is in idle state.  
2 Play Preset Channels  
Press  
or open TV touch menu, touch CH+ and CH- to select  
previous or next channel. When the channel number is the maximum one, the  
system will change to the minimum channel. For example, if there is altogether  
18 channels, and we are using channel 18 now and continue to select upward,  
In idle state, press DISP button on the panel or remote once to  
display clock as follows:  
the channel will transfer to channel 0.  
Input numbers to select channel. If the first number is input and there is  
OPERATION  
no further input for 2 seconds, the system will seek channel corresponding to  
the first number.  
1 : MENU  
2 : MENU  
3 : DISP  
4 : SRC  
SELECT  
ADJUST  
STORY  
EXIT  
3. Fine Tuning  
Touch Left or Right fine tuning button or use the remote controller. If  
the key is pressed continuously, the tuning effect will change continuously.  
08:08  
4 Manual Storage  
Use touch key STORE or press ENTER on the remote, STORE XX will  
be displayed. Press CH+ and CH- channel selecting keys on the remote) to  
select wanted channel, then press STORE or ENTER.  
Setting the Clock  
Press DISP button twice in idle state to enter clock setting, the clock  
is indicated as red, which will glitter while the time is adjusted.  
Use menu adjusting keys to select position; use volume keys to  
adjust the time. The system will be in idle state 5 seconds after the operation.  
5 Blue Screen  
Quite large noises will occur when the TV signal is too weak. To avoid  
this situation, one can start BLUE SCREEN function. The screen will turn to  
blue and mute when the signal is too weak.  
Precautions:  
1
2
3
At most 100 channels can be stored in this machine.  
If the receiving effect is bad, check the connection of antenna.  
If the bad effect is caused by weak signal or high-speed driving,  
it does not mean something is wrong with this machine.  
27  
28  
 
Supplementary Information  
Supplementary Information  
Malfunction Eliminating  
Measures (advices)  
Problems  
Possible reasons  
Problems  
Possible reasons  
Bad turnoff, orthe disk  
has been damaged.  
Replace it witha better one  
Can't be switched  
on, unable to use  
the machine.  
Incorrect connection of  
downlead and linker.  
Make sure all connections are  
correct  
The disk cannotbe played  
Fuses melted  
Find out thereason, and  
replace the fuseof the  
same specifications.,  
Parent locking function  
is turned on  
Close this functionor degrade  
its level  
Display parent locking  
can't be played  
Noises or otherfactors  
make interior micro-  
processor unable towork  
well  
Press RESET torestore  
the machine toits initial  
setup.  
Can not switch languages  
or captions  
Current disk doesnot  
have multi-languages  
Cannot switch languages  
Use disk menuto switch  
Can't use remote  
controller.The  
machine refuses  
to work eventhe  
remote is correctly  
used.  
Insert new battery  
Insufficient battery power.  
Some operations are  
prohibited in certain  
circumstances.  
Youcan only switchbetween  
items displayed  
Enter correct circumstances  
Current DVD diskdoes not have  
Unable to displaycaption  
Use disk menuto switch  
No caption  
Disks are dirty  
Clean the disks  
Youcan only switchbetween  
items displayed  
Cannot be played  
Disks used notsuitable  
to this machine  
Check the disktypes  
Does not play in the  
Current disk doesnot have  
the language orcaption set  
in DVD SETUPMENU  
Unable to playthis way  
Change another disk which  
is compatible to your video  
system.  
The Video system ofthe  
disk incompatible to the  
machine.  
language and caption  
set in DVD SETUP MENU  
Current disk doesnot have  
multi-angel scenes  
Unable to switch between  
different angels because  
there is no such angels.  
Unable to switchthe  
view angel  
No sound  
Incorrect linking of cables  
Link the cables correctly.  
The machine is in MUTE  
state, or slow-motion  
or playing frame by frame  
The volume does not  
increase  
In such kindof situations,  
no sound output.  
Youtry to switchbetween  
different angels, butthere  
is no recordedmulti-angle  
scenes.  
Use switch whenthe disk has  
multi-angel scenes  
Certain speaker  
cannot ouput sound  
Incorrect setup ofsound  
fields  
Setup sound fieldscorrectly  
The pictures are  
extremely obscure,  
distorted and  
blurred  
This machine iscompatible  
with anti-copy system,but  
there may besome parallel  
lines or otherthings while  
playing, this doesnot mean  
a problem ofthis machine.  
The disk hasanti-copy  
information.(some disks  
have this function)  
No pictures,or  
display PIC OFF  
Link hand-brake line, and  
open it.  
Hand-brake line notlinked  
hand-brake not opened.  
When the power  
switch is turned  
to ON orACC,the  
machine boot  
Normal function.  
Automatic Booting  
No optical output  
The optical outputin DVD  
setup menu isclosed  
Set Optical Outputas ON,  
(note:optical ouput means  
audio output is  
automatically  
prohibited.)  
29  
30  
 
Supplementary Information  
Maintenance of DVD  
Supplementary Information  
CD-R/CCD-RW Disks  
While using CD-R/CD-RW disks, only completed ones can be used.  
CD-R/CD-RW Disks recorded fromCD Recorder orpersonal computer may  
not be playeddue to theirspecial nature, scrape, dirtiness; or thedirty lens, dew  
of the machine.  
Use normal disks only.If irregular, non-round or srtange shape disks are  
inserted, they maybe hooked inthe machine orcan not beplayed correctly.  
Check all disks before playing and see whether there are cracks, scrapes or  
crimp. Such disksmay not beplayed correctly. Do n not use them.  
Do not touch the recorded side (no print) while taking disks. When they are not  
used, put them in the box.  
Disks recorded personallyin computer maynot be played, which is determined  
by their formats and adaptable circumstances. Use correct formats to record.  
CD-R/CD-RW disks may not be played in direct sunshine, places with high  
temperature or theparking place ofthe car.  
Do not putdisks in placeswith direct sunshineor high temperature.  
Do not pastelabel, draw thingsor use chemicalson the disksurfaces.  
Use soft drycloth to cleanthe disk fromthe center tooutside.  
There may bemoisture in DVDdevices if youuse heating systemin winter.  
And the dew may prevent DVD from normal working. Turn off the machine  
for about anhour to makeit dry ifthere is anydew. Use soft anddry cloth to  
wipe moist disks.  
The titles and other text information recorded in CD-R/CD-RW disks may not  
be displayed in this machine.(in the case of CD-DA)  
The time of playing CD-RW in this machine will be longer than traditional CD  
or CD-R.  
Read the relevant instructions before using CD-R/CD-RW.  
Serious shaking on road may intermit the playing.  
DVD Disks  
For some DVD disks, certain functions may not be performed.  
Some DVDs cannot be played.  
While using DVD-R/DVD-RW disks, only video filescan be played, normal  
computer files cannot be played.  
DVD-R/DVD-RW Disks recorded invideo mode maynot be playeddue to  
their special nature, scrapes, or dirtylens and dew.  
Disks recorded personallyin computer maynot be played, which is determined  
by their formats and adaptable circumstances. Use correct formats to record.  
32  
31  
 
Supplementary Information  
Supplementary Information  
Matters to Note about Remote Controller  
MP3  
Do not put the remote on panels, steering wheels, or where with direct  
sunshine. The temperature in these places are high in summer and the  
remote may be distorted.  
Mp3 is the abbreviation of MPEG audio layer3, which is the standard of audio  
compression technology.  
Mp3 files on CD-ROM CD-R and CD-RW can be played in this machine. Disks  
compatible with ISO9660 level 1 and 2, or with ROMEO and JOLIETsystem  
can also be played.  
If the car is parked in the sun, put the remote in the tool box or other  
places away from the sunshine. In the sunshine, the signal from the remote  
may not be received correctly by the host machine, you have to put the remote  
near the sensor on the host panel.  
Recorded disks with multi sections can be played.  
Mp3 files are incompatible with the transporting of read-in data.  
The max char width of the file name (including the extending name .Mp3)  
is 32 (counting from the first char).  
About LCD  
The max char width of the folder name is 32.  
Do not press LCD, which may distort the pictures or arouse problems.  
Pictures become blurred, or even the LCD is harmed.  
If the file is recorded through ROMEO and JOLIETsystem, only the former  
32 char are displayed. While playing disks with Mp3 and CD-DA, such as  
CD-EXTRA and MIXED-MODE CD, the system can only switch between Mp3  
and CD-DA.  
About Cleaning LCD  
Use soft cloth with a little water to clean LCD.  
The selected folder sequence of playing and other operations will be the  
sequence to write in the software. So the anticipated sequence of playing should  
not conflict with the actual playing sequence. However, there are indeed some  
softwares in which playing sequence is allowed to set.  
Do not use solvents like gas, thinner, detergent in the market or static  
electricity-resisting sprayer.  
Do not use this machine when the temperature is below -15 or over 45.  
If your car is parked in a very cold or hot place, pictures may not be clear.  
This is not the question of LCD. Pictures will become clear again once  
the temperature comes to normal.  
The file is compatible with Id3 Label version 1.0 and 1.1, so as to display the  
music titles and authors. The enhancing function is valid only when playing  
Mp3 in 32,44.1 and 48 Khz. Sample frequencies 16,22,05,24,32,44.1,48KHz  
can be played.  
There may appear static blue or red points called bright spots which  
can appear on any LCD. LCD is a very fine apparatus, 99.99% of  
which is normal, with only less than 0.01% defect leading to those points.  
They will not influence your appreciation of pictures, however.  
The tone of Mp3 file can usually be bettered when the bit rate is increased. This  
machine can play recordings between 8KBPS and 320KBPS. But in order to  
enjoy good tone, we recommend disks over 128KBPS.  
IMPORTANT:  
While naming an Mp3 file, add relevant extending name .mp3.  
This machine will play files with .mp3 as Mp3. Do not use this extending name  
on non-mp3 files so as to avoid noises and other problems.  
33  
34  
 
Supplementary Information  
Information about Touching Screen  
Product Specification:  
Matters to Note in Using Touching Screen:  
Power  
13.8V DC(10.8-14.5V)  
Grounding system::  
NegativePolar  
Touching screen is solid and reliable, however, one should still keep the  
following in mind:  
Host:  
1
2
Do not scrape the screen hard, slight touching is enough;  
max current:  
size (width*height*depth)  
Body:  
15A  
Touching Screen is notwater-proof. In extreme case, waterwill enter  
the circuit throughpanel;  
178*100*180mm  
3.5Kg  
Weight:  
3
4
Touching Screen includes a plastic unit, do not knock or press it hard.  
keep the screenfrom high temperature, dust and humility.  
SCREEN:  
Size/Aspect Ratio:  
Pels:  
6.5inch wide/16:9(valid area143*79mm)  
Menu locations on the touching screen:  
280,800(1200*234)  
Type:  
TFT Active Matrix  
PAL:  
NTSC/PAL compatible(SECAM is to becustomize)  
MODE  
MUTE  
EQ  
MODE  
ANG+  
EQ  
Temperature Scope:  
Storage Temperature:  
Angel Adjusting: :  
-20--+70.C  
-30--+80.C  
0-50  
EJECT  
+
SOUND  
MENU  
MENU  
VOL+  
AUDIO:  
VOL-  
SOUND  
MENU  
MENU  
Max Power Output:  
Resistance  
50W*4  
4
scope of variation 4-8  
Front Output Level/Resistance: 4.0V/200  
DISP  
ANG  
Encoder:  
Linear PCM/Dolby Digital/Dolby Professional  
ANG-  
SRC  
FUNC  
SRC  
Editor II/DTS  
ICBM-1-TOUCH  
DVD Player  
System:  
Disks:  
DVD Audio, DVD Vedio, VCD,CD,DTS CD and MP3  
DVD Record, DVD Film,VCD,CD,DTS CD  
2(stereo), Digital 6 tracks  
Tracks:  
Mp3 Encoding Format:  
MPEG-1 and 2, Audio Layer3  
FM Tuner:  
Scope of Frequency:  
Valid Sensibility:  
AM Tuner:  
87-108.0MHz  
10 dB(0.7 /v/75 , Single Track,S/N:30 dB)  
Scope of Frequency:  
Valid Sensibility:  
531-1 602KHz(9KHz)  
18 V(S/N 20 dB)  
35  
36  
 

Pentax Camera Lens D User Manual
Philips Baby Accessories SCF172 22 User Manual
Philips Breast Pump 0 User Manual
Philips Car Video System 170B6 User Manual
Philips Computer Drive CDD3615 User Manual
Philips DVD Player BDP3010 User Manual
Philips Portable Radio AE2630 08 User Manual
Philips Projector PT AE300U User Manual
Poulan Lawn Mower 183748 User Manual
Power Acoustik Car Video System PMD 121CMX User Manual