Open-Ceiling Speaker
RS600i
Technical Information for System Engineers
Key Features
• BroadBeam® waveguide technology
delivers a consistent dispersion pattern
up to 10 kHz for maximum coverage
area per speaker (EASE™documented).
• One 165 mm (6.5 in) polypropylene
woofer and one 25 mm (1.0 in) convex
aluminum tweeter with FerroFluid™
cooling mounted to a proprietary cast-
aluminum M6™ baffle and heat sink.
Mounting hardware included
Specifications: RS600i
• Weatherized components for indoor &
outdoor applications.
System Type
6.5” Coax, open-ceiling, ported (33 Watt transformer for
25/70.7/100 Volt or voice coil/8 Ohm direct)
Frequency Response (-3 dB)1
Low Frequency (-10 dB)1
Max. Program Power
63 Hz - 22 kHz
45 Hz - 22 kHz
180 Watts
90 Watts
60 Watts
110.5 dB
90.5 dB
• Includes hanging hardware with
aircraft cables and integrated
SpeedClamp™ self-locking cable grip
for fast, easy & secure installation.
Also includes Euroblock connector
& terminal weather boot.
Max. Continuous Power RMS2
Max. UL Power Rating3
Max. SPL dB @ 1 M
Sensitivity dB @ 1W/1M4
• Patented ZeroReflection™ enclosure
technology for optimal sound reproduc-
tion & cabinet rigidity.
Impedance (nominal)
8 Ohm (nominal value)
135º
125º
3.83 (Averaged 100 Hz - 10 kHz); 6.80 @ 2 kHz
5.00 dB (Averaged 100 Hz - 10 kHz); 4.79 dB @ 2 kHz
6-Position rotary switch with voice coil/8 Ohm direct
Coverage Angle (-6 dB @ 2 kHz)
Coverage Angle (-6 dB @ 10 kHz)
Directivity Factor (Q)
Directivity Index (DI)
Tap Selector
• Easy access 6-position selectable tap
switch for 25, 70.7 and 100 Volt applica-
tions with voice coil/8 Ohm direct sim-
plifies ordering and inventory tracking.
Transformer Taps
70.7 V Output
33 W 105.5 dB
17 W 103.0 dB
9 W 100.0 dB
6 W 98.5 dB
3 W 95.5 dB
100 V Output
33 W 105.5 dB
17 W 103.0 dB
9 W 100.0 dB
6 W 98.5 dB
25 V Output
5 W 97.5 dB
2.5 W 94.5 dB
1.3 W 91.5 dB
0.63 W 88.5 dB
• Iridite-plated steel grille with protective
powder-coated finish for lasting
durability.
• 90.5 dB average sensitivity offers high-
output capabilities & reduced amplifica-
tion costs.
Transducers
Low Frequency Driver
1 x 165 mm (6.5 in) Polypropylene cone,
butyl rubber surround
25 mm (1.0 in) Convex aluminum tweeter with waveguide
25 mm (1.0 in)
3 kHz
• UL 1480 rev. 5, CE (EMC Directive 89/
366/EEC, EN55020, EN55013 & IEC529
approval pending. Milspec 810 approved.
High Frequency Driver
Low Frequency Voice Coil
Crossover Frequency
• Optional accessory: AC-RS-SM6 bracket
for surface-mount applications.
Network Type
Low Pass
High Pass
Enclosure Material
Motor Board
Grille
Inputs
Colors
Height
Diameter
12 dB per octave, 2nd order
12 dB per octave, 2nd order
Injection molded ABS, glass fiber reinforced
Cast aluminum
Iridite-plated steel with powder-coat finish
4 Pin, 5 mm Euroblock for individual or daisy chain connection
Black or white
363.6 mm / 14.31 in
307.3 mm / 12.10 in
6.1 kG / 13.5 lbs
7.5 kG / 16.5 lbs
• High-quality black or white paint finish.
Custom paint colors optional.
Description
The RS600i is a 6.5” 2-way speaker with
an open-ceiling enclosure design that
delivers effective low-end response (45
Hz) and optimal off-axis performance
(up to 10 kHz, EASE™ documented).
SoundTube’s proprietary BroadBeam®
waveguide tweeter system delivers con-
sistent high-performance audio across the
operating bandwidth. The RS600i speaker
design incorporates a low-profile grille,
proprietary M6™ motor-board, driver
protection circuitry and a 6-position tap
switch with voice coil/8 Ohm direct.
Hanging hardware is included & features
SpeedClamp™ self-locking cable grip for
fast, easy & secure installation.
Weight
Shipping Weight
Accessories
Included
Hanging hardware, Euroblock connector & terminal
weather boot
Surface-Mount Bracket (AC-RS-SM6)
1 Per box
Optional
Packaging
1
2
3
4
Frequency response is measured in half & full space and includes a low-frequency peak > + 3 dB.
Continuous power rating, EIA-426-B test.
UL testing specifies band-limited pink noise over the indicated frequency spectrum.
2.83 Volts at a distance of 1 meter.
SoundTube continually develops new product innovations and improvements. Updates to existing
products without prior notice are an example of SoundTube’s drive for constant improvement.
© 2005 SoundTube Entertainment, Inc. All rights reserved. PN TS-RS600 REV 08.29.05
Open-Ceiling Speaker
RS600i
Technical Information for System Engineers
spectrum (up to 10 kHz, EASE™ docu-
Data Acquisition
Applications
mented). The result is an audio system
with fewer speakers, reduced power
needs, shorter installation time and cost
savings on shipping & labor.
All performance data acquired at
SoundTube’s Technical Measurement
Center (TMC) are analyzed using a
variety of standard measurement tech-
niques, including Measured Length
Sequence (MLS) and Time Delay Spec-
trometry (TDS). Performance, develop-
ment and data acquisition tools include:
Gold Line TEF 20, CLIO, LMS, LEAP,
and proprietary modeling software.
EASE™ data are acquired through an
automated TEF 20/Outline/EASE™ inter-
face.
Designed for indoor & outdoor back-
ground to mid-level SPL applications,
the RS600i includes a single-point
mounting system for rapid open-ceiling
installations with an optional SM6
bracket for surface-mount applications.
The broad dispersion pattern (45 Hz –
10 kHz, EASE™ documented) and high
sensitivity (90.5 dB 1W/1M) make the
RS600i speaker ideal for retail, restau-
rants, grocery stores, hotels, casinos,
fitness centers, conference rooms, big
box stores, museums, trade shows &
airports and other open-ceiling applica-
tions. For applications where additional
bass is required, SoundTube’s RS801i 8”
subwoofer provides bass down to 40 Hz.
Patented SoundTube
Technologies
SoundTube Entertainment is con-
stantly developing new technologies
that enhance audio product perfor-
mance. SoundTube Entertainment inno-
vations are protected by multiple U.S.
& international patents, which explic-
itly cover SoundTube dispersion, enclo-
sure & dome technologies. SoundTube
Entertainment actively defends its pat-
ents in order to protect SoundTube
resellers and end users.
EASE™ Data – 3-D polar plots.
SoundTubeSPEC™ – Proprietary
SoundTube speaker placement software.
Architectural Specifications
BroadBeam® Wide
Dispersion Technology
Technical Data and
Specification Tools
The loudspeaker shall consist of a 165
mm (6.5 in) low-frequency transducer and
a 25 mm (1.0 in) high-frequency transducer
with a crossover network installed in the
ported enclosure. The low-frequency voice
coil diameter shall be 25 mm (1.0 in).
More than 3 years in development,
SoundTube’s proprietary BroadBeam®
technology incorporates a high-fre-
quency waveguide mated to a 1” convex
aluminum tweeter. The BroadBeam®
high-frequency waveguide delivers a
consistent dispersion pattern across
the upper registers of the frequency
Technical Data
SoundTube Entertainment strives to
provide complete and effective technical
information and data to dealers, engi-
neers and designers. All data are avail-
able from SoundTube Entertainment or
at www.soundtube.com.
Performance specifications of a typi-
cal production unit shall be as follows:
Useable frequency response shall extend
Polar Plots
250 Hz
500 Hz
1,000 Hz
125 Hz
4,000 Hz
8,000 Hz
10,000 Hz
2,000 Hz
Technical data, EASE™ plots, SoundTubeSPEC™ software & product downloads available at www.soundtube.com
Open-Ceiling Speaker
RS600i
Technical Information for System Engineers
Mechanical Drawings
from 45 Hz – 22 kHz (-10 dB, half space,
no external equalization). Measured sen-
sitivity (2.83 Volt input, 1 meter) shall be
at least 90.5 dB. The speaker shall have
a nominal impedance of 8 Ohms and be
available for 25, 70.7 & 100 Volt modes
with voice coil/8 Ohm direct. The fre-
quency-dividing network shall have a
crossover frequency of 3 kHz with slopes
of 12 dB per octave (2nd order) for both
low & high pass filters. Rated power
capacity shall be at least 90 Watts continu-
ous power (RMS) and conform to EIA-426-
B testing. Maximum continuous output at
1 meter shall be 110.5 dB.
363.6 mm (14.31 in)
The low-frequency transducer shall have
a polypropylene cone with butyl rubber sur-
round. The high-frequency transducer shall
be constructed of aluminum with a propri-
etary BroadBeam® waveguide.
307.3 mm (12.10 in)
Installation for the RS600i shall be by
aircraft cable affixed to the speaker chassis
via a carabiner. For seismic & safety
Included Accessories
redundancy, a secondary aircraft cable
shall be included and attach to the speaker
chassis via #10 bolt. The external wiring
input connector shall be a 4-pin, 5 mm
Euroblock for 8 Ohm or distributed sys-
tems and shall accept from 10 – 22 gauge
wire. The system shall have a weather-
resistant boot covering all wire connectors.
The enclosure shall be constructed of
injection-molded, mineral-filled, glass- rein-
forced ABS. The grille shall be constructed of
iridite-plated, powder-coated steel for lasting
performance in the elements. Overall cabinet
dimensions shall be no more than 363.6 mm
(14.31 in) in height by 307.3 mm (12.10 in) in
diameter. The RS600i shall include hanging
hardware, Euroblock connector & weather-
resistant terminal boot.
Hanging Hardware: Main & Safety
Cables w/ SpeedClamp™
SoundTube’s hanging cable kit incorpo-
rates hanging & safety cables & fasten-
ers for an integrated and easy-to-install
system. Hanging & safety cables are infi-
nitely adjustable to 2.74 M (9.0 ft).
Optional Accessory
The system shall be the SoundTube
RS600i with hanging hardware for both
low & high impedance applications.
463.80 mm (18.26 in)
SoundTube Entertainment
6430 North Business Park Loop
Park City, Utah 84098
Phone 435.647.9555
346.45 mm
(13.64 in)
Fax
435.647.9666
Toll Free 800.647.TUBE
All SoundTube products come
with a 5-year limited warranty.
Surface-Mount Bracket (AC-RS-SM6)
SoundTube Entertainment manufactures a complete line of speakers for:
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing
All SoundTube products are designed and engineered in the USA.
|