Philips CD Player AZ1845 User Manual

AZ1845  
CD Soundmachine  
Register your product and get support at  
User Manual  
 
2
3
6
7
MP3  
TRK  
MP3  
TRK  
4
PROG  
5
MP3  
X
TRK  
MP3  
ALL  
TRK  
 
English  
Controls  
Congratulations on your purchase and  
welcome to Philips!  
Back/bottom panel (See 1)  
$ MP3 LINK inlet for external audio source  
.
To fully benefit from the support that  
Philips offers, register your product at  
% AC MAINS~ - inlet for power cord.  
^ Voltage selector - adjusts to match the  
local voltage: 110-127V or 220-240V.  
& Telescopic antenna - improves FM recep-  
Supplied Accessories  
– AC power cord  
tion.  
* p - 3.5 mm stereo headphone socket  
Helpful hints: The speakers will be muted  
when headphones are connected to the set.  
Top/front panels (See 1)  
1
DBB  
turns the bass enhancement on/off  
( Battery door Press on the arrow and  
push to insert 6 x 1.5V R-20/ UM-1/ D-  
cells.  
2 TUNING +/- – tunes to radio stations  
3 PUSHTO OPEN – opens/closes the CD  
door  
CAUTION  
4
Source selector: CD/USB, FM, MW, OFF  
selects CD, USB or radio (FM/MW) source  
switches off the set  
– Use of controls or adjustments  
or performance of procedures  
other than herein may result in  
hazardous radiation exposure  
or other unsafe operation.  
– (Invisible) Laser Radiation when  
open. DO NOT STARE INTO  
BEAM.  
– High voltage! Do not open.You  
run the risk of getting an elec-  
tric shock.The machine does  
not contain any user-servicea-  
ble parts.  
5
6
VOLUME  
adjusts volume level  
Display shows the CD/USB functions.  
7 CD/USB – enters disc or USB mode  
8 MODE selects different play modes: e.g.  
REPEAT or SHUFFLE (random order)  
9 USB port – connects an external USB  
device  
starts or pause CD/USB playback  
selects the next/previous track  
.
.
0
2 ;  
§
– searches forwards/backwards (press  
and hold the button) within the cur-  
rent track  
– Modification of the product  
could result in hazardous radia-  
tion of EMC or other unsafe  
operation.  
9
stops disc/USB playback;  
erases a program  
! USB REC copies music to an external  
USB device.  
@ ALB +/- For MP3-CD/USB only: select  
albums.  
# PROG – programs tracks and reviews the  
program  
 
Power Supply  
General Operation  
themselves as the free end of the cable may  
still be live if only the connector is removed  
from the MAINS socket at the back of the  
unit.  
Power Supply  
Whenever convenient, use the power supply  
cord if you want to conserve battery life.  
Make sure you remove the plug from the set  
and wall outlet before inserting batteries.  
Batteries (not included)  
The type plate is located on the bottom  
of the set.  
Helpful hints:  
1
2
Open the battery door and insert 6 batteries,  
type R-20, UM-1 or D-cells, (preferably  
alkaline) with the correct polarity as indicated by  
the "+" and "" symbols inside the compartment.  
To avoid unnecessary energy consumption,  
always adjust the Source selector to OFF  
after using the set.  
Close the battery door, making sure the  
batteries are firmly and correctly in place.The  
set is now ready to operate.  
General operation  
Switching on and off and selecting the  
function  
To select your sound source, adjust the  
Source selector to: CD/USB, FM or  
MW.  
Batteries contain chemical substances, so  
they should be disposed of properly.  
1
Incorrect use of batteries can cause electrolyte  
leakage and will corrode the compartment or  
cause the batteries to burst:  
Do not mix battery types: e.g. alkaline with  
carbon zinc. Only use batteries of the same type  
for the set.  
When inserting new batteries, do not try to mix  
old batteries with the new ones.  
Remove the batteries if the set is not to be used  
for a long time.  
2
3
To switch off the set, adjust the Source  
selector to OFF position.  
To switch to MP3 LINK mode, connect an  
external audio source to the MP3 LINK  
inlet.  
Helpful hints:  
Using AC power  
The set switches to MP3 LINK mode  
WARNING:Always check you have  
completely switched off the set, before  
you change or disconnect power supply.  
automatically when an external audio source  
is connected, no matter the set is in  
CD/USB, FM or MW mode.  
1
2
Check if the power voltage, as shown on  
the type plate located on the bottom  
of the set, corresponds to your local power  
supply. If it does not, consult your dealer or  
service center.  
The MP3 LINK inlet is not for earphones.  
Adjusting volume and sound  
Adjust the sound with the VOLUME and  
DBB controls.  
Connect the power cord to the AC  
MAINS~ inlet and the wall socket.The set is  
now connected and ready for use.  
3
4
To switch the set off completely, withdraw the  
power cord from the wall socket.  
Install the unit near the AC outlet and where  
the AC power plug can be easily reached.  
Disconnect the power cord from the wall  
socket to protect your set during heavy  
thunderstorms. Children could seriously injure  
 
Tuner  
MP3/WMA/CD Player  
Radio reception  
Playing a disc  
1
2
Adjust the Source selector to FM or  
MW.  
This CD player plays Audio Discs including  
CD-Recordables (CD-R), CD-Rewritables  
(CD-RW) and MP3/WMA CD.  
Turn TUNING to tune to a station.  
CD-ROM, CD-I, CDV,VCD, DVD or  
computer CDs are not possible for playback.  
To improve radio reception  
IMPORTANT!  
For FM, extend, incline and turn the telescopic  
antenna for best reception. Reduce its length if  
the signal is too strong.  
CDs encoded with copyright protection  
technologies by some record companies may  
be unplayable by this product.  
For MW, the set uses a built-in antenna. Direct  
this antenna for best reception by turning the  
whole set.  
DRM-protected WMA disc is not support.  
1
2
Adjust the Source selector to CD/USB.  
Press CD/USB once or more to enter the  
CD mode.  
About MP3  
3
Open the CD door, and insert a CD with  
the printed side facing up, then press the CD  
door gently to close.  
The music compression technology MP3  
(MPEG1 Audio Layer 3) significantly reduce  
the digital data of an audio CD while  
maintaining CD quality sound.  
Play starts automatically.  
Getting MP3 files: you can either download  
legal music files from the internet to your  
computer hard disc, or create such files by  
converting audio CD files in your computer  
through appropriate encoder software.  
(128kbps bit rate or higher is recommended  
for MP3 files.)  
4
To pause playback, press 2;  
Display: 2 flashes. (See 3)  
To resume, press 2; again.  
To stop playback, press  
.
5
6
9.  
Helpful hints:  
Creating an MP3 CD: burn the music files  
from your computer hard disc on a CDR or  
CDRW using your CD burner.  
CD play will also stop when:  
you open the CD door;  
you select USB FM MW or OFF  
the CD has reached the end.  
,
,
;
Helpful Hints:  
Make sure that the file names of the MP3 files  
end with .mp3 .  
Total number of music files and albums: around  
400 (with a typical file name length of 20  
characters)  
The length of file names affects the number of  
tracks for playback.With shorter file names, more  
files can be burned on a disc.  
 
MP3/WMA/CD Player  
Helpful hints :  
Selecting a different track  
When playback of your program comes  
to the stop position, your set will return  
to normal playback.To re-enter program  
mode, press PROG in the stop position.  
Press / § once or repeatedly until the  
desired track number appears in the display.  
For MP3/WMA-CD: First press ALB +/-  
once or more to select your album.  
In the pause/stop position, press 2; to start  
playback.  
Reviewing the program  
In the stop position, press PROG to see the  
total number of stored tracks.  
Finding a passage within a  
track  
Erasing a program  
1
2
During playback, press and hold or §.  
The CD is played at high speed and with  
reduced volume.  
When you recognize the passage you want,  
release or § to resume normal playback.  
You can erase the contents of the memory  
by:  
– pressing  
9
twice.  
FM MW or OFF;  
– selecting USB  
,
,
– opening the CD door;  
Helpful hints:  
When your searching reaches the end of the  
last track, the CD goes to stop mode.  
Different play modes:  
REPEAT and SHUFFLE  
(See 5, 6)  
Programming track  
numbers  
You may store up to 40 tracks in the desired  
sequence. If you like, store any track more  
than once.  
You can select and change the various play  
modes before or during playback, and  
combine REPEAT modes with PROG (PRO-  
GRAM).  
plays the current track continuously.  
For MP3:  
1
2
In the stop position, press PROG to  
activate programming.  
Display: PROG and P01 flash. (See 4)  
ALB plays all tracks of current album  
repeatedly.  
repeats the entire CD/program.  
– plays all tracks in random order.  
Press  
or  
§
to select your desired track  
number.  
– plays all tracks repeatedly in  
random order.  
To select play mode, press MODE once or  
more.  
The display shows the related icon.  
Press 2; to start playback if in the stop/pause  
position.  
Playback will automtically start if you select  
SHUFFLE mode.  
For MP3/WMA-CD: first press ALB +/-  
once or more to select your album.  
1
2
3
4
Press PROG to store the desired track  
number.  
Display: PROG and P02 flash for you  
to program the next track.  
Repeat steps 2 to 3 to select and store all  
desired tracks in this way.  
If you attempt to store more than 40  
tracks, no track can be selected and the  
display shows FUL.  
3
To return to normal playback, press MODE  
repeatedly until the modes are no longer  
displayed.  
You can also press 9 to cancel your play  
mode.  
5
To play your program, press  
2/;.  
 
MP3/WMA/CD Player  
USB Connection  
CD Ripping  
Using USB connectivity  
This function enables you to record music to  
a connected USB device from the CD sound  
source without interrupting your enjoyment  
of the music.  
AZ1845 is fitted with a USB port in the front  
panel, offering a plug and play feature which  
allows you to play, from your AZ1845, digital  
music and spoken contents stored on a USB  
mass storage device.  
1
2
Insert a USB device with sufficient free space  
to the set’s USB port marked  
Using a USB mass storage device, you can  
also enjoy all the features offered by AZ1845  
which are explained and instructed in the sec-  
tions of disc operation.  
.
Select the CD source and then load a CD  
onto the set.  
3
4
Select a track where ripping will start.  
Compatible USB mass storage devices  
With the AZ1845, you can use  
– USB flash memory (USB 2.0 or USB 1.1)  
– USB flash player (USB 2.0 or USB 1.1)  
Press USB REC to start ripping.  
“ONE” appears and •REC flashes.  
In the CD mode, to record all tracks starting  
from the one you selected, press USB REC  
again.  
• USB device which requires driver  
installation under Windows XP is not  
supported.  
“ALL” appears and •REC ALL flashes.  
5
At any moment, simply press 9 to stop rip-  
ping.  
Note:  
In some USB flash players (or memory devices),  
the stored contents are recorded using copyright  
protection technology. Such protected contents  
will be unplayable on any other devices (such as  
AZ1845 device).  
To delete a track from your USB  
device  
1
2
Adjust the source selector to CD/USB  
Supported formats:  
Press CD/USB once or more to enter the  
USB mode  
USB or memory file format FAT12, FAT16,  
FAT32 (sector size: 512 - 65,536 bytes)  
MP3 bit rate (data rate): 32-320 kbps and  
variable bit rate  
WMA v9 or earlier  
Directory nesting up to a maximum of 8  
levels  
Number of albums: maximum 99  
Number of tracks: maximum 999  
ID3 tag v2.0 or later  
3
4
Plug in the USB device.  
(In the STOP position) Press  
select the track to be deleted.  
Press and hold on the system for more  
than 2 seconds.  
“DEL” starts flashing on the display panel.  
Press to confirm the deletion.  
or  
§
to  
5
9
6
9
File name in Uicode UTF8 (maximum  
length: 128 bytes  
 
USB Connection  
The system will not play or support  
the following:  
• Empty albums: an empty album is an album  
that does not contain MP3/WMA files, and  
will not be shown in the display.  
• Non-supported file formats are skipped.  
This means that e.g.:Word documents .doc  
or MP3 files with extension. dlf are ignored  
and will not be played.  
• AAC,WAV, PCM. NTFS audio files  
• DRM protected WMA files  
Helpful hints:  
– Up to 999 playable audio files stored on a  
USB mass storage device can be played on  
AZ1845.  
– Up to 99 playable albums stored on a USB  
mass storage device can be selected and  
displayed on AZ1845.  
– Make sure that file names of MP3 files end  
with .mp3. and the file names of WMA files end  
with .wma.  
– For DRM protected WMA files, use Windows  
Media Player 10 (or later) for conversion.Visit  
Media Player and WM DRM (Windows Media  
Digital Rights Management).  
• WMA files in Lossless format  
Playing a USB mass storage device  
Make sure that your AZ1845 is being pow-  
ered by AC mains or specified batteries.  
1
– For USB device playing, if the display shows  
"OL", it means that the USB device is electrically  
overloading AZ1845.You need to change a USB  
device.  
2
3
Adjust the source selector to CD/USB.  
Press CD/USB once or more to enter the  
USB mode.  
4
Plug a compatible USB mass storage device  
to AZ1845’s USB port marked  
. If need-  
ed, use a suitable USB cable to connect  
between the device and AZ1845’s USB port.  
The device will automatically power on.  
If the device is not powered on, turn on the  
power manually, then re-connnect it.  
AZ1845’s display shows USb and then the  
total number of playable audio files (Max.  
displayed track number is 999) stored on  
the device.  
Play starts automatically.  
 
Maintenance & Safety (See 7)  
CD player and CD handling  
Safety information  
If the CD player cannot read CDs correctly,  
use a cleaning CD to clean the lens before  
taking the set to repair.  
Place the set on a flat, hard and stable surface  
so that the system does not tilt.  
Where the MAINS plug or an appliance cou-  
pler is used as the disconnect device, the dis-  
connect device shall remain readily operable.  
The lens of the CD player should never be  
touched!  
Sudden changes in the surrounding  
Do not expose the set, batteries, CDs to  
humidity, rain, sand or excessive heat caused  
by heating equipment or direct sunlight.  
temperature can cause condensation on the  
lens of your CD player. Playing a CD is then  
not possible. Do not attempt to clean the  
lens but leave the set in a warm environment  
until the moisture evaporates.  
The apparatus shall not be exposed to drip-  
ping or splashing.  
Adequate ventilation with a minimum gap of  
15cm (6 inches) between the ventilation  
holes and surrounding surfaces is necessary  
to prevent heat build-up.  
Always close the CD door to avoid dust on  
the lens.  
To clean the CD, wipe in a straight line from  
the center towards the edge using a soft,  
lint-free cloth. Do not use cleaning agents as  
they may damage the disc.  
Do not cover the ventilation openings with  
items such as newspapers, table-cloths, cur-  
tains, etc.  
Never write on a CD or attach any stickers to it.  
No objects filled with liquids, such as vases,  
shall be placed on the apparatus.  
No naked flame sources, such as lighted can-  
dles, should be placed on the apparatus.  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
To clean the set, use a dry cloth. Do not use  
any cleaning agents containing alcohol, ammo-  
nia, benzene or abrasives as these may harm  
the housing.  
Battery shall not be exposed to excessive  
heat such as sunshine, fire or the like.  
 
Troubleshooting  
If a fault occurs, first check the points listed below before taking the set for repair.  
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.  
WARNING:  
Do not open the set as there is a risk of electric shock. Under no  
circumstances should you try to repair the set yourself, as this will  
invalidate the guarantee.  
Problem  
Note:  
Make sure the CD is not encoded with copy-  
right protection technologies, as some do not  
conform to the Compact Disc standard.  
Possible cause  
• Remedy  
No sound /power  
The CD skips tracks  
Volume not adjusted  
CD damaged or dirty  
• Adjust theVOLUME  
• Replace or clean CD  
Power cord not securely connected  
• Connect the AC power cord properly  
Batteries dead/ incorrectly inserted  
• Insert (fresh) batteries correctly  
CD contains non-audio files  
Program/shuffle is active  
• Quit program/shuffle mode  
Note: A CD badly scratch or dirty may result in  
improper operation.  
• Press , § once or more to skip to a CD audio  
track, instead of the data file.  
Sound skips during MP3 playback  
MP3 file made at compression level exceeding  
320kbps  
Display does not function properly / No reac-  
tion to operation of any of the controls  
Use a lower compression level to record CD  
tracks into MP3 format  
Electrostatic discharge  
Disc damaged or dirty  
Replace or clean disc  
• Switch off and unplug the set. Reconnect after a  
few seconds  
The USB device doesn’t play on my  
AZ1845  
---, Er or no indication  
It is not set in the USB mode.  
No CD inserted  
Select the USB mode.  
Insert a CD  
CD badly scratched or dirty  
Replace/ clean CD, see Maintenance  
The device is not securely connected to AZ1845’s  
USB port.  
• Re-connect the device, and make sure that the  
device is powered on.  
The device is not supported by AZ1845, or the audio  
file format stored on the device is not supported by  
AZ1845.  
• Use a compatible device/ playable audio file  
format.  
Laser lens steamed up  
• Wait until lens has cleared  
CD-R/CD-RW is blank or not finalized  
Use a finalized CD-R/CD-RW or suitable CD  
Audio disc only  
 
INFORMATION REGARDING USB DIRECT:  
1. Compatibility of the USB connection on this product:  
a) This product supports most USB Mass storage devices (MSD) that these devices are compliant to the  
USB MSD standards.  
i) Most common Mass storage class devices are flash drives, memory sticks, jump drives and etc.  
ii) If you see a "Disc Drive" showing up on your computer after you have plugged the mass storage  
device into your computer, most likely it is MSD compliant and it will work with this product.  
b) If your Mass storage device requires a battery/power source, please make sure you have a fresh bat-  
tery in it or charge the USB device first and then plug it into this product again.  
2. Supported Music type:  
a) This device only supports unprotected music with file extension: .mp3 .wma  
b) Music bought from on-line music stores are not supported because they are secured by Digital Rights  
Management protection (DRM).  
c) File name extensions that ended with the following are not supported: .wav; .m4a; .m4p; .mp4; .aac  
and etc.  
3. No Direct connection can be made from a Computer USB port to this product even you have either or both  
mp3 or wma file in your computer.  
Environmental information  
All unnecessary packaging material has been omitted.The packaging can be easily separated  
into three materials: cardboard, polystyrene and plastic.  
Your set consists of materials which can be recycled if disassembled by a  
specialized company. Please observe the local regulations regarding the  
disposal of packaging, dead batteries and old equipment.  
Specifications  
Power consumption.............15W  
Total output power...............2 x 1W RMS  
Dimensions (L x W x H)......420 x 240 x 168 (mm)  
Weight....................................2.8 kg  
 
Hearing Safety  
Listen at a moderate volume:  
Using headphones at a high volume can impair your hearing. This product can produce sounds in  
decibel ranges that may cause hearing loss for a normal person, even for exposure less than a  
minute. The higher decibel ranges are offered for those that may have already experienced some  
hearing loss.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of  
sound. So after prolonged listening, what sounds “normal” can actually be loud and harmful to  
your hearing. To guard against this, set your volume to a safe level before your hearing adapts and  
leave it there.  
To establish a safe volume level:  
Set your volume control at a low setting.  
Slowly increase the sound until you can hear it comfortably and clearly, without distortion.  
Listen for reasonable periods of time:  
Prolonged exposure to sound, even at normally “safe” levels, can also cause hearing loss.  
Be sure to use your equipment reasonably and take appropriate breaks.  
Be sure to observe the following guidelines when using your headphones:  
Listen at reasonable volumes for reasonable periods of time.  
Be careful not to adjust the volume as your hearing adapts.  
Do not turn up the volume so high that you can't hear what's around you.  
You should use caution or temporarily discontinue use in potentially hazardous situations.  
Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc.; it may  
create a traffic hazard and is illegal in many areas.  
 

Peerless Industries TV Mount ST 630 User Manual
Pelco Blower BK700 User Manual
Philips Home Theater Server SBCRU930 User Manual
Philips Radio D 2345 User Manual
Philips Speaker SBC BC8320 User Manual
Philips Work Light HF3480 User Manual
Pioneer Stereo Amplifier VSA AX10 User Manual
Planet Technology Switch GSD 802PS User Manual
Polaroid Portable DVD Player PDM 0732 User Manual
Porter Cable Portable Generator D27245 028 0 User Manual