Philips Car Satellite TV System 32HFL7406D 10 User Manual

Signature  
32HFL7406D/10  
42HFL7406D/10  
HotelTV User Manual  
Philips Hospitality – Dec. 2011  
 
• Risk of overheating!  
Never install the TV in a confined space. Always  
leave a space of at least 4 inches or 10 cm  
around the TV for ventilation. Ensure curtains  
or other objects never cover the ventilation  
slots on the TV.  
2 Important  
Read and understand all instructions before you use  
your TV. If damage is caused by failure to follow  
instructions, the warranty does not apply.  
• Risk of damage to the TV!  
Before you connect the TV to the power outlet,  
ensure that the power voltage matches the  
value printed on the back of the TV. Never  
connect the TV to the power outlet if the  
voltage is different.  
Safety  
• Risk of electric shock or fire!  
• Never expose the TV to rain or water. Never  
place liquid containers, such as vases, near  
the TV. If liquids are spilt on or into the TV,  
disconnect the TV from the power outlet  
immediately. Contact Philips Consumer Care  
to have the TV checked before use.  
• Never place the TV, remote control or batteries  
near naked flames or other heat sources,  
including direct sunlight.  
• Risk of injury, fire or power cord damage!  
Never place the TV or any objects on the power  
cord.  
• To easily disconnect the TV power cord from the  
power outlet, ensure that you have full access to  
the power cord at all times.  
• When you disconnect the power cord, always pull the  
plug, never the cable.  
• Disconnect the TV from the power outlet and aerial  
before lightning storms. During lightning storms,  
never touch any part of the TV, power cord or  
aerial cable.  
• Risk of hearing damage! Avoid using earphones or  
headphones at high volumes or for prolonged  
periods of time.  
To prevent the spread of fire, keep candles or  
other flames away from the TV, remote control  
and batteries at all times.  
• Never insert objects into the ventilation slots or  
other openings on the TV.  
• When the TV is swivelled ensure that no strain is  
exerted on the power cord. Strain on the  
power cord can loosen connections and cause  
arcing.  
• If the TV is transported in temperatures below 5°C,  
unpack the TV and wait until the TV temperature  
matches room temperature before connecting the  
TV to the power outlet.  
• Risk of short circuit or fire!  
• Never expose the remote control or batteries to  
rain, water or excessive heat.  
• Avoid force coming onto power plugs. Loose  
power plugs can cause arcing or fire.  
Screen care  
• Risk of injury or damage to the TV!  
• Two people are required to lift and carry a TV  
that weighs more than 25 kg.  
• Avoid stationary images as much as possible.  
Stationary images are images that remain on-  
screen for extended periods of time. Examples  
include: on-screen menus, black bars and time  
displays. If you must use stationary images, reduce  
screen contrast and brightness to avoid screen  
damage.  
• When stand mounting the TV, use only the  
supplied stand. Secure the stand to the TV  
tightly. Place the TV on a flat, level surface  
that can support the combined weight of the  
TV and the stand.  
• When wall mounting the TV, use only a wall  
mount that can support the weight of the TV.  
Secure the wall mount to a wall that can  
support the combined weight of the TV and  
wall mount. Koninklijke Philips Electronics N.V.  
bears no responsibility for improper wall  
mounting that result in accident, injury or  
damage.  
• Unplug the TV before cleaning.  
• Clean the TV and frame with a soft, damp cloth.  
Never use substances such as alcohol, chemicals  
or household cleaners on the TV.  
• Risk of damage to the TV screen! Never touch, push,  
rub or strike the screen with any object.  
• To avoid deformations and colour fading, wipe off  
water drops as soon as possible.  
• Risk of injury to children!  
Disposal of your old product and  
batteries  
Follow these precautions to prevent the TV from  
toppling over and causing injury to children:  
• Never place the TV on a surface covered by a  
cloth or other material that can be pulled away.  
• Ensure that no part of the TV hangs over the  
edge of the surface.  
Your product is designed and manufactured with high  
quality materials and components, which can be  
recycled and reused.  
When this crossed-out wheeled bin symbol is  
attached to a product it means that the  
product is covered by the European Directive  
2002/96/EC. Please inform yourself about the  
local separate collection system for electrical and  
electronic products.  
• Never place the TV on tall furniture (such as a  
bookcase) without anchoring both the furniture  
and TV to the wall or a suitable support.  
• Educate children about the dangers of climbing on  
furniture to reach the TV.  
Please act according to your local rules and do not  
dispose of your old products with your normal  
household waste.  
3
 
Correct disposal of your old product helps to  
prevent potential negative consequences for  
the environment and human health.  
Please inform yourself about the local rules on  
separate collection of batteries because correct  
disposal helps to prevent negative consequences for  
the environmental and human health.  
Your product contains batteries covered by the  
European Directive 2006/66/EC, which cannot be  
disposed with normal household waste.  
4
 
1. Professional  
Mode  
Professional Setup Remote  
control (22AV8573 optional)  
instruction  
__________________________  
Introduction  
Included in this TV is a special functional  
mode that allows the TV to be configured for  
commercial application. This feature is called  
Professional mode.  
This section has been designed to help install  
and operate this TV in Professional mode.  
Before reading this section, please also read  
section 3 to set the basic functionality of this  
TV.  
If the TV is not switched on, use  
the mains switch to switch the  
TV on.  
__________________________  
Benefits of Professional mode  
This TV is specially designed to operate in  
Professional Mode. Professional Mode offers  
the following benefits:  
Access to the [TV Setup Menu] can be  
blocked. This prevents users (e.g. guests)  
from deleting or changing channel settings and  
/ or modifying picture and sound settings. This  
ensures that TVs are always set up correctly.  
A switch-on volume and channel can be  
selected. After switching on, the TV will  
always start on the specified volume level  
and channel.  
The maximum volume level of the TV can  
be limited in order to prevent disturbance  
to other guest.  
To enter the Professional Setup menu:  
press RC5 Setup  
press Home/Menu  
On a Guest remote:  
Channels can be blanked (Video only).  
The TV local buttons VOLUME +/-,  
press [3, 1, 9, 7 ,5 , 3,  
(MUTE)]  
P/CH+/- and  
Screen information can be suppressed.  
(Home) can be locked.  
Note  
SETUP mode should be selected for  
hotel installer.  
5
 
Professional mode options  
This paragraph describes the functionality of each item in the Professional mode setup menu.  
Enter the next layer by pressing [OK], or [>]. Return to a previous level by pressing [<].  
Navigate in the current layer by pressing [^], or [v].  
Layer 1  
Layer 2  
Layer 3  
Off / On  
BDS Mode Setting  
BDS Mode  
Off / On  
Off / On  
Off / On  
Local Keyboard Locked  
Remote Control Locked  
OSD Display  
[0..60] Slider [50]  
[0..60] Slider [60]  
[List]  
Off / On  
On / Standby  
Off / On  
Switch on volume  
Maximum volume  
Switch on channel  
High security mode  
Power on  
Display message  
When Display Message is On  
Welcome Message Line 1  
Welcome Message Line 2  
Browse USB  
Up to 20 characters  
Up to 20 characters  
Off / On  
Home Menu Settings  
Feature Settings  
Off / On  
Auto SCART  
Off / On  
Off / On  
Off / On  
Easylink break-in  
Easylink control  
Auto USB  
None, [List]  
HDMI 1, 2, Side  
Ext 1  
Channel settings  
Blank channels  
Blank extensions  
YPbPr  
VGA  
Store Settings  
Smartloader  
Smartloader to TV  
TV to Smartloader  
_______________________  
BDS Mode Settings  
[OSD display]  
Set this function to show or hide screen information.  
[BDS mode]  
[Off]: Screen information is suppressed.  
[On]: Normal screen information is displayed.  
Enables / disables the Professional mode.  
[On]: All settings in the Professional mode Setup  
menu are in effect.  
[Switch on volume]  
When the guest switches the TV on, it will play at the  
specified volume level.  
[Off]: The TV operates as a normal (consumer)  
TV.  
[Local Keyboard lock]  
[Maximum volume]  
This option specifies the maximum allowable volume  
level of the TV.  
[Off]: The TV local buttons will function normally.  
[On]: The TV local buttons except [POWER] are  
locked.  
[Switch on channel]  
When the guest switches the TV on, it will play at the  
specified channel.  
[RC lock]  
Disables the operation of the Guest remote control.  
[Off]: All buttons on Guest remote control will  
function normally.  
[On]: All buttons on the Guest remote control are  
disabled. (It is still possible to enter the  
Professional setup menu by pressing [3, 1,  
[High security]  
[Off]: Professional mode setup menu can be  
accessed by both Guest remote control  
(Press [3, 1, 9, 7, 5, 3 +  
Professional setup remote control )  
(MUTE)] )and the  
9, 7, 5, 3,  
(MUTE)]).  
6
 
[On]: Professional mode setup menu can only be  
accessed by the Professional setup remote  
control  
[Easylink break-in / Easylink control]  
Philips Easylink (HDMI-CEC) enables one-touch  
play and one touch standby between HDMI-CEC  
devices.  
[Power on]  
The power on function allows the TV to enter a  
specific mode ([On], [Standby], or [Last status]) of  
operation after the mains power is activated.  
[Easylink break-in]  
[Off]: Disables HDMI-CEC one touch stand-by  
feature in Professional mode.  
[On]: When set, the TV will always turn on after  
the mains power is activated.  
[Standby]: When set, the TV will always turn to  
standby after the mains power is activated.  
[On]: Enables HDMI-CEC one touch stand-by  
feature in Professional mode.  
[Easylink control]  
[Off]: Disables HDMI-CEC one touch play feature  
in Professional mode.  
Welcome message  
The Welcome message function allows the TV to  
show a customized greeting message to the hotel  
guest whenever the TV is switched on. This helps to  
personalize the hotel experience for guests. The  
Welcome message can consist of 2 lines of text, with  
each line containing a maximum of 20 alphanumeric  
characters. Use Navigation buttons on the remote  
control to compose the Welcome message.  
[On]: Enables HDMI-CEC one touch play feature  
in Professional mode.  
[Auto USB]  
Enables or disables USB break-in feature in  
Professional mode.  
[Off]: When USB is plugged in, the [Multimedia]  
menu will not appear automatically, but  
users can access [Multimedia] menu from  
the Guest menu.  
Note: Welcome message is always disabled if you select  
[BDS Mode Setting] > [OSD display] > [Off.]  
[On]: When USB is plugged in, the [Multimedia]  
[Display message]:  
Selects [On] to activate the welcome message.  
Selects [Off] to disable the welcome message.  
menu appears automatically.  
_______________________  
Channel Settings  
[Welcome message line 1]:  
[Line 1]: Sets the characters of the first line  
message.  
[Blank channels]  
The Blank channels function disables the display of  
video on the TV, but does not affect the audio  
output. This function can be used for audio  
applications (example: music-only channels, and so  
on) which do not necessarily require the display of  
video.  
[Welcome message line 2]:  
[Line 2]: Sets the characters of the second line  
message.  
_______________________  
Home Menu Settings  
Enter [Blank channels], the list of all  
channels appear.  
Select a channel and press OK to mark. The  
channels marked with [X] will not display video  
on the TV.  
[Browse USB]  
Enables / disables the USB Browse icon in the  
Guest Menu.  
Navigate with [^] and [v]  
Exit with [<].  
[On]: When set to On, the TV will show the USB  
icon in the Home menu.  
[Off]: When set to Off, the TV will hide the USB  
icon in the Home menu.  
[Blank extensions]  
The Blank extensions function disables the display of  
video on the TV, but does not affect the audio  
output. This function can be used for audio  
applications (example: music-only channels, and so  
on) which do not necessarily require the display of  
video.  
_______________________  
Feature Settings  
Enter [Blank extensions], the list of all  
channels appear.  
[Auto scart]  
Enables auto scart switching (or break-in) in  
Professional mode.  
[Off]: Disables auto scart switching or break-in.  
[On]: Enables auto scart switching or break-in.  
Select a channel and press OK to mark. The  
channels marked with [X] will not display video  
on the TV.  
Navigate with [^] and [v]  
Exit with [<].  
7
 
The TV Functionality Set reference to match a  
hospitality TV is the following:  
______________________  
Store Settings  
Hospitality Set reference  
TV Functionality Set reference  
To confirm the changes the settings has to be  
stored.  
32HFL7406D/10  
40HFL7406D/10  
32PFL7406H/12  
40PFL7406H/12  
The TV Functionality Set reference DFU is available via the Philips  
Hospitality Website: www.philips.com/hotelTV  
select [Store] > [Confirm] to save the changes.  
_______________________  
After making the proper settings, activate the  
Professional Setup Remote Control mode  
(press the RC5 Setup button) and pressing  
Home/Menu to active the BDS Setup Menu.  
Smartloader  
Place a USB Memory stick in the side USB  
connector  
Layer 1  
BDS Mode Setting  
Store Settings  
After this the TV initiates a restart and will switch to Standby.  
Layer 2  
BDS Mode  
[OK]  
Layer 3  
On  
Layer 1  
Smartloader  
Layer 2  
Smartloader to TV  
Layer 3  
OK  
TV will read and store Cloning data from USB stick  
Layer 1  
Smartloader  
Layer 2  
TV to Smartloader  
Layer 3  
OK  
TV will store Cloning data to USB stick  
Remote Control Alignment  
Professional Setup RC  
Home [RC6 Guest]  
TV RC  
2. TV  
Functionality  
Setup Mode  
instruction  
To select specific TV functionality settings (i.e.  
Channel settings, picture settings .etc) this can be  
done in TV Setup Mode only.  
To enter the TV Setup mode, it is necessary to  
disable the Professional mode. To do this, change  
the setting of BDS Mode in the BDS Mode Setting  
menu to ‘off’, and store this setting.  
Layer 1  
BDS Mode Setting  
Store Settings  
Layer 2  
BDS Mode  
[OK]  
Layer 3  
Off  
After this the TV initiates a restart and will switch to TV Setup mode.  
Now the Professional Setup Remote Control in RC6  
Guest mode (press on the Professional Setup RC  
the RC6 Guest button) and the TV Remote control  
can be used to make the required setting.  
The available options are described in the TV  
Functionality Set reference DFU.  
8
 
3. Guest  
mode  
instruction  
___________________________  
Introduction  
When this television is configured as a  
professional television, the guest is having no  
access to TV functionality that can alter TVs  
expected behavior.  
The guest will not have access to menus that  
can change the channel configuration, nor can  
he as example put the TV in a louder audio  
level then is permitted in the BDS Mode setting.  
This section describes the functionality  
available to the guest.  
(Home): Accesses the home menu.  
The home menu gives you easy  
access to connected devices,  
picture and sound settings, and  
other useful features.  
___________________________  
Signature Remote Control  
The functionality of the Remote Control is  
limited, there where the interaction could lead  
to an unpredicted behavior of the television for  
the next guest.  
Therefore it is not possible to store specific  
changed settings in the television by the guest.  
[Find]:  
Accesses the browse menu to  
select TV channel list, the  
Electronic Program Guide and  
teletext.  
[Back]:  
Returns to a previous menu  
screen. Press and hold to return  
to watch TV.  
*Not supported in MHEG mode.  
___________________________  
Activate the television  
[Options]: Accesses options for the current  
activity or selection.  
Watch TV and press [Options] will bring up  
a menu to select: What’s on, Subtitles,  
Audio language, Dual I-II, Status  
[Standby]: Switches the TV to standby if it is  
on. Switches on the TV if it is in  
standby.  
[Source]: Key button to select external AV  
signals (i.e. HDMI, EXT1, ..)  
.
[OK]:  
Confirms an entry or selection.  
9
 

Peavey Music Mixer PA 700S User Manual
Peavey Portable Speaker 1G User Manual
Pelco Switch 100BASE FX User Manual
Philips Portable Multimedia Player MCP9350I User Manual
Philips Universal Remote SRU3007 27 User Manual
Pioneer Flat Panel Television PDP 40 User Manual
Pioneer Industrial Stereo Receiver BD V1000 Series User Manual
Playskool Games 52010 User Manual
Primera Technology Printer ADL MAX User Manual
PVI Industries Water Heater 40 P 90A MXG User Manual