Philips Car Speaker BT100 User Manual

Always there to help you  
Register your product and get support at  
BT100  
User manual  
 
1 Important  
Safety  
Important Safety Instructions  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Do not block any ventilation openings. Install in accordance with the  
manufacturer’s instructions.  
Do not install near any heat sources such as radiators, heat registers, stoves,  
or other devices (including amplifiers) that produce heat.  
Only use attachments/accessories specified by the manufacturer.  
Refer all servicing to qualified service personnel. Servicing is required when  
the device has been damaged in any way, such as power-supply cord or plug  
is damaged, liquid has been spilled or objects have fallen into the device, the  
device has been exposed to rain or moisture, does not operate normally, or  
has been dropped.  
Devices shall not be exposed to dripping or splashing.  
Do not place any sources of danger on the device (e.g. liquid filled objects,  
lighted candles).  
Danger of explosion if battery is incorrectly replaced. Replace only with the  
same or equivalent type.  
Warning  
Never remove the casing of this apparatus.  
Never lubricate any part of this apparatus.  
Never place this apparatus on other electrical equipment.  
2
EN  
 
 
Notice  
Any changes or modifications made to this device that are not expressly approved  
by WOOX Innovations may void the user’s authority to operate the equipment.  
This product complies with the radio interference requirements of the European  
Community.  
Hereby,WOOX Innovations declares that this product is in compliance with the  
essential requirements and other relevant provisions of Directive 1999/5/EC.You  
Disposal of your old product  
Your product is designed and manufactured with high quality materials and  
components, which can be recycled and reused.  
When this crossed-out wheeled bin symbol is attached to a product it means that  
the product is covered by the European Directive 2002/96/EC.  
Please inform yourself about the local separate collection system for electrical and  
electronic products.  
Please act according to your local rules and do not dispose of your old products  
with your normal household waste. Correct disposal of your old product helps to  
prevent potential negative consequences for the environment and human health.  
Your product contains batteries covered by the European Directive 2006/66/EC,  
which cannot be disposed with normal household waste.Please inform yourself  
about the local rules on separate collection of batteries because correct disposal  
helps to prevent negative consequences for the environmental and human health.  
EN  
3
 
 
Always bring your product to a professional to remove the built-in battery.  
Environmental information  
All unnecessary packaging has been omitted.We have tried to make the packaging  
easy to separate into three materials: cardboard (box), polystyrene foam (buffer)  
and polyethylene (bags, protective foam sheet.)  
Your system consists of materials which can be recycled and reused if disassembled  
by a specialized company. Please observe the local regulations regarding the  
disposal of packaging materials, exhausted batteries and old equipment.  
The Bluetooth® word mark and logos are registered trademarks owned by  
Bluetooth SIG, Inc. and any use of such marks by WOOX Innovations is under  
license.  
Note  
The type plate is located on the bottom of the apparatus.  
4
EN  
 
2 Your portable speaker  
Congratulations on your purchase, and welcome to Philips!To fully benefit from  
Introduction  
With this speaker, you can  
listen to audio from an external device via Bluetooth connection,  
listen to audio from an external device through the AUX socket, and  
make phone calls.  
What's in the box  
Check and identify the contents of your package:  
Main unit  
USB cable  
Short user manual  
Safety sheet  
EN  
5
 
 
Overview of the speaker  
f
e
d
a
b
c
a
Battery/Bluetooth indicator  
Lights up, flashes or turns off depending on the status of BT100.  
For details, see the following section Charging indicator and Bluetooth  
indicator.  
b
c
Integrated microphone  
Press to answer an incoming call.  
Press to end the current call.  
Press and hold for 3s to reject an incoming call.  
Press and hold for 3s to change call between BT100 and mobile phone.  
In Bluetooth mode, press and hold for 8s to clear the pairing  
information.  
d
e
DC IN  
Charge BT100 through the USB cable.  
OFF AUX  
Slide to select Bluetooth/AUX IN mode.  
Slide to power off the speaker.  
f
AUX  
Connect to an external player.  
6
EN  
 
 
3 Get started  
Always follow the instructions in this chapter in sequence.  
Charge the built-in battery  
BT100 is powered by a built-in rechargeable battery.  
Note  
Before use, fully charge the built-in battery.  
X
U
A
OFF  
Connect the USB cable between  
the DC IN socket on the speaker, and  
a USB socket of a computer.  
EN  
7
 
 
Charging indicator  
Indicator  
In Bluetooth mode Flashing blue/Solid blue  
(depending on the working status)  
Battery  
Under charging  
Flashing blue/Solid blue  
Fully charged  
(depending on the working status)  
In AUX IN mode  
In OFF mode  
Flashing white  
Solid white  
Flashing white  
OFF  
Under charging  
Fully charged  
Under charging  
Fully charged  
Note  
In Bluetooth mode, when the battery is empty, BT100 turns off automatically.And the Bluetooth  
indicator flashes white while recharging.To return to Bluetooth mode, turn BT100 off and select  
Bluetooth mode again.  
Select a source or turn off  
Slide the OFF AUX switch to select a source or turn off BT100.  
: Listen to an external Bluetooth device through Bluetooth connection.  
AUX IN: Listen to an external device through an audio input cable.  
OFF:Turn off BT100.  
8
EN  
 
 
4 Use Bluetooth devices  
With this speaker, you can listen to audio from a player and make a call through  
Bluetooth.  
Note  
Make sure that no audio input cable is connected to the AUX socket.  
Philips does not guarantee the compatibility with all Bluetooth devices.  
Before pairing a device with this system, read its user manual for Bluetooth compatibility.  
The product can memorize a maximum of 8 paired devices.  
Make sure that Bluetooth function is enabled on your device, and your device is set as visible to all  
other Bluetooth devices.  
Any obstacle between this system and a Bluetooth device can reduce the operational range.  
Keep away from any other electronic device that may cause interference.  
Connect a device  
1
2
3
Switch the slider to  
.
On your Bluetooth device, search for BT100.  
In the device list, select PHILIPS BT100.  
If a message prompts for the permission for Bluetooth connection with  
PHILIPS BT100, confirm it.  
»
If a password is required, enter 0000 and then confirm.  
BT100 beeps twice when the Bluetooth connection is established.  
Bluetooth indicator  
The LED indicator on the top indicates the status of Bluetooth connection.  
Indicator  
Bluetooth connection  
Connecting or waiting for connection  
Connected  
Flashing blue  
Solid blue  
EN  
9
 
 
Disconnect a device  
On your device, disable the Bluetooth connection with BT100.  
Or, on BT100, press and hold  
when it is not during a call.  
Note  
Before connecting another Bluetooth device, disconnect the current device first.  
Reconnect a device  
For a paired Bluetooth device on which the automatic reconnection is  
enabled, this product reconnects with it once it is detected.  
For a paired Bluetooth device that does not support the automatic  
reconnection, reconnect it with this product manually.  
Play audio via Bluetooth  
Note  
If there is an incoming call on the connected mobile phone, music play pauses.  
Buttons Functions  
Press and hold for 8 seconds to clear the Bluetooth pairing information.  
10 EN  
 
 
Make a call  
Button functions in Bluetooth mode  
Buttons Status  
Incoming call Press to answer an incoming call.  
Press and hold for more than 3 seconds to reject an  
Functions  
incoming call.  
During a call  
Press to end the current call.  
Press and hold for more than 3 seconds to transfer call  
between BT100 and the mobile phone.  
EN 11  
 
 
5 Listen to an external device  
You can also listen to an external audio device, for example, MP3 player, through  
BT100.  
X
U
A
1
OFF  
2
X
U
A
OFF  
1
Connect an audio input cable with a 3.5 mm connector on both ends to  
the AUX socket on this product, and  
the headphone socket on the external device.  
2
3
Switch the slider to the AUX position.  
Play audio on the external device (refer to its user manual).  
12 EN  
 
 
6 Product information  
Note  
Product information is subject to change without prior notice.  
Amplifier  
Rated Output Power  
Signal to Noise Ratio  
Aux-in Link  
2W RMS  
>70dB  
300 mV RMS, 10 kohm  
Bluetooth  
Bluetooth specification  
Supported Profiles  
V3.0 +EDR  
HFPv1.5,AD2Pv1.2  
Advanced features  
Range  
Echo and noise cancellations  
10 m/33 feet line of sight  
General information  
DC power input  
USB: 5V, 500mA;  
3.7V 500mAH  
>8 hours  
Built-in Li-Polymer battery  
Battery working time  
Dimensions - Main Unit (L x W x H)  
Weight - Main Unit  
63 x 63 x 82 mm  
0.18 kg  
EN 13  
 
 
7 Troubleshooting  
Warning  
Never remove the casing of this device.  
To keep the warranty valid, never try to repair the system yourself.  
If you encounter problems when using this device, check the following points  
before requesting service. If the problem remains unsolved, go to the Philips Web  
page (www.philips.com/support).When you contact Philips, make sure that the  
device is nearby and the model number and serial number are available.  
General  
No power  
Recharge your speaker.  
No sound  
Adjust volume on the connected device.  
When you listen to audio through Bluetooth, make sure that no audio input  
cable is connected to the AUX socket.  
Make sure that your Bluetooth device is within the effective operational  
range.  
No response from the speaker  
Restart the speaker.  
14 EN  
 
 
About Bluetooth device  
The audio quality is poor after connection with a Bluetooth-enabled device.  
The Bluetooth reception is poor. Move the device closer to this product or  
remove any obstacle between them.  
Cannot connect with the device.  
The Bluetooth function of the device is not enabled. Refer to the user  
manual of the device for how to enable the function.  
This product is already connected with another Bluetooth-enabled device.  
Disconnect that device and then try again.  
The paired device connects and disconnects constantly.  
The Bluetooth reception is poor. Move the device closer to this product or  
remove any obstacle between them.  
For some devices, Bluetooth connection may be deactivated automatically as  
a power-saving feature.This does not indicate any malfunction of this product.  
EN 15  
 
 
Specifications are subject to change without notice  
2014 ©WOOX Innovations Limited.All rights reserved.Philips  
and the Philips’ Shield Emblem are registered trademarks of  
Koninklijke Philips N.V. and are used byWOOX Innovations  
Limited under license from Koninklijke Philips N.V.  
BT100_00_UM_V2.0  
 

Peerless Industries Flat Panel Television MIS374 User Manual
Pelco Marine Radio SM5200 User Manual
Philips Computer Monitor 107Q62 User Manual
Philips Headphones SBCHC8900 User Manual
Philips Switch SWS7686W 12 User Manual
Pioneer Automobile Accessories CNDV 1000HD User Manual
Pioneer Flat Panel Television PDP 425CMX User Manual
Polaris Automobile Sportsman 400 HO User Manual
Polk Audio Speaker AM7775 B User Manual
PYLE Audio Car Stereo System PLD184V User Manual