Rwegwistewr yo.upr hproildiupctsan.dcgoetmsup/pworteatlcome
CE130
EN
User manual
•
Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
1 Important
Safety
Notice
•
Read and understand all instructions
before you use your apparatus. If damage
is caused by failure to follow instructions,
the warranty does not apply.
•
•
•
This apparatus is designed for negative
ground (earth) 12 V DC operation only.
To ensure safe driving, adjust the volume
to a safe and comfortable level.
Improper fuses can cause damage or
fire. When you need to change the fuse,
consult a professional.
The making of unauthorized copies of
copy-protected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offence.
This equipment should not be used for such
purposes.
•
•
Use only the supplied mounting hardware
for a safe and secure installation.
To avoid short circuit, do not expose the
apparatus, remote control or remote
control batteries to rain or water.
Never insert objects into the ventilation
slots or other openings on the apparatus.
Clean the apparatus and frame with a
soft, damp cloth. Never use substances
such as alcohol, chemicals or household
cleaners on the apparatus.
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States
and/or other countries.
•
•
This apparatus includes this label:
•
•
Never place any objects other than discs
into the apparatus.
Never use solvents such as benzene,
thinner, cleaners available commercially,
or anti-static sprays intended for discs.
Visible and invisible laser radiation when
open. Avoid exposure to beam.
Risk of damage to the apparatus screen!
Never touch, push, rub or strike the
screen with any object.
•
•
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
2002/96/EC:
Caution
• Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiation exposure or
other unsafe operation.
•
The apparatus shall not be exposed to
dripping or splashing.
4
EN
Specifications are subject to change without
notice. Trademarks are the property of
Koninklijke Philips Electronics N.V. or their
respective owners. Philips reserves the right
to change products at any time without being
obliged to adjust earlier supplies accordingly.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
Your product contains batteries covered by
the European Directive 2006/66/EC, which
cannot be disposed of with normal household
waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment
and human health.
This product complies with the radio
interference requirements of the European
Community.
Environmental information
All unnecessary packaging has been omitted.
We have tried to make the packaging easy to
separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene
(bags, protective foam sheet.)
Your system consists of materials which can
be recycled and reused if disassembled by
a specialized company. Please observe the
local regulations regarding the disposal of
packaging materials, exhausted batteries and
old equipment.
Any changes or modifications made to this
device that are not expressly approved by
Philips Consumer Lifestyle may void the user’s
authority to operate the equipment.
2010 © Koninklijke Philips Electronics N.V. All
rights reserved.
EN
5
h User manual
2 Your car audio
system
i Quick start guide
a
b
d
Congratulations on your purchase, and
welcome to Philips!To fully benefit from the
support that Philips offers, register your product
c
Introduction
With the in-car audio system, you can enjoy
your drive while listening to:
•
•
•
•
FM or AM (MW) radio
Audio from USB devices
Audio from SD/SDHC card
Audio from other external devices
g
i
e
h
f
The unit supports the following media format:
What’s in the box
Check and identify the contents of your
package:
a Main unit (with a sleeve)
b Carrying case (includes the front panel)
c Trim plate
d ISO male connector
e Rubber cushion
f Screws x 4 pcs
g Disassembly tools x 2 pcs
6
EN
Overview of the main unit
a
b
c
d
o
n m l
k
j i
h
g
f
e
q
p
d
a
b
•
USB socket.
•
•
Unlock the panel.
ꢀ
6281'
e MP3 LINK
Connect external audio device.
•
Turn on or off Maximizing volume.
f +SONG/FOLDER -/PRESET
c BAND/
•
•
Select preset radio station.
Search for track/folder.
•
•
Select tuner band.
Return to previous menu.
EN
7
g OPTIONS/CLOCK
•
•
Access option menu.
View clock.
h
/
•
•
•
Tune for radio station.
Skip/search for track.
Fast forward/backward playback.
i DISP
•
Display current status.
j MENU
•
Access system menu.
k
/
•
•
•
•
Turn the unit on or off.
Confirm selection.
Mute or unmute sound.
Rotate to adjust settings.
l EQ AUDIO
•
•
Select equalizer (EQ) setting.
Access audio setting menu.
m SOURCE
•
Select audio source.
n ZONE
•
Switch the music listening zone.
o DBB
•
Turn on/off Dynamic Bass Boost
(DBB) sound.
p RESET
•
Restore default settings.
q SD card slot
8
EN
Note on the power supply lead (yellow)
3 Get started
•
When you connect other devices to this
system, ensure that the rating of the car
circuit is higher than the total fuse value
of all the connected devices.
Caution
Notes on speaker connection
• Use the controls only as stated in this user
manual.
•
Never connect speaker wires to the
metal body or chassis of the car.
Never connect speaker wires with stripes
to one another.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of your apparatus.The
model number and serial number are on the
bottom of your apparatus.Write the numbers
here:
•
Connect wires: ISO male connectors
Caution
Model No. __________________________
Serial No. ___________________________
• Ensure that all loose leads are insulated with
electrical tape.
Note
Install the car audio
• Consult a professional to connect CE130 as
instructed below.
These instructions are for a typical installation.
However, if your car has different requirements,
make the corresponding adjustment. If you have
any questions regarding installation kits, consult
your Philips car audio dealer.
1 Connect the supplied male connector to
the unit.
Caution
• This unit is designed for negative ground
(earth) 12 V DC operation only.
• Always install this unit in the car dashboard.
Other locations can be dangerous as the rear
of the unit heats up during use.
• To avoid short-circuit: before you connect,
ensure that the ignition is off.
• Ensure that you connect the yellow and red
power supply leads after all other leads are
connected.
• Ensure that all loose leads are insulated with
electrical tape.
• Ensure that the leads do not get caught under
screws orin parts that will move (e.g. seat rail).
• Ensure that all ground (earth) leads are run to
a common ground (earth) point.
2 Check the car’s wiring carefully and
connect them to the supplied male
connector.
• Use only the supplied mounting hardware for a
safe and secure installation.
• Improper fuses can cause damage or fire.
When you need to change the fuse, consult a
professional.
Note
• Risk of danger! Please consult a professional to
perform the below steps!
EN
9
Connector
ANTENNA
Connect to
Antenna
a
a
a
b
b
1
2
c
d
FRONT LINE OUT Front right
R (Socket) speaker
FRONT LINE OUT Front left
L (Socket) speaker
REAR LINE OUT R Rear right
(Socket) speaker
REAR LINE OUT L Rear left
(Socket) speaker
a
b
b
c
d
3
4
5
e
c
c
d
f
g
h
d
Tip
• The pin arrangement for the ISO connectors
depends on the type of vehicle you drive. Be
sure to make proper connections to prevent
damage to the unit.
1
2
3
4
e
f
Green/
black strip
White/
black strip
Gray/black Right speaker (Front)
strip
Purple/
black strip
Red
Left speaker (Rear)
Left speaker (Front)
Mount into the dashboard
1 If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car battery.
Right speaker (Rear)
Ignition key +12V DC
when ON/ACC
Motor/electric antenna
relay control lead/
Amplifier relay control
lead
•
•
If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
If the car battery is not disconnected,
to avoid short-circuit, ensure that the
bare wires do not touch each other.
Blue
g
h
Black
Yellow
Ground
To the +12V car
battery which is
energized at all times
2 Ensure that car dashboard opening is
within these measurements:
3 Connect the antenna and amplifier as
illustrated, if applicable.
5mm
L
Rear
Front
183 mm
R
53mm
10 EN
3 Remove the mounting sleeve with the
supplied disassembly tools.
6 Slide the unit into the dashboard until you
hear a click sound.
4 Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
Note
• If the unit is not fixed by sleeve but by the
supplied screws, skip this step.
53.5 m m
183 mm
7 Reconnect the negative terminal of the
car battery.
5 Place the supplied rubber cushion over
the end of the mounting bolt.
EN 11
Attach the front panel
1 Attach the trim plate.
2 Press
/
repeatedly until the current
time is displayed.
3 Rotate clockwise to set hour.
4 Press to confirm.
5 Rotate counterclockwise to set minute.
6 Press to confirm.
View clock
1 Press and hold OPTIONS repeatedly
until the clock is displayed.
2 Insert the right side of the panel in the
chassis until it is correctly engaged.
1
2
3 Press the left side of the panel until it is
locked into place.
Turn on
1 Press to turn on the unit.
•
To turn off the unit, press for over
3 seconds.
Set clock
1 Press MENU.
12 EN
Store radio stations in
memory
4 Listen to radio
You can store up to 6 stations in each band.
Tune to a radio station
Store stations automatically
1 Press SOURCE repeatedly to select radio
mode.
1 Press OPTIONS repeatedly until
2 Press BAND/ to select band: [FM1],
[AUTO-STORE] displays.
[FM2], [FM3], [AW1] or [AW2] .
2 Press to confirm.
3 Press
or
to tune to a radio station
» The six strongest stations of the
selected band are saved in preset
channel automatically.
manually.
» The radio station is broadcast.
» To search for a radio station
automatically, press
3 seconds.
or
for over
Store stations manually
1 Tune to a station that you want to store.
(see ‘Tune to a preset station’ on page
14)
Select tuner region
You can select suitable country/region of the
radio.
2 Press and hold +/PRESET or -/RRESET to
enter storing mode.
» The preset number starts to blink..
1 Press SOURCE to select Radio mode.
2 Press MENU.
3 Press +/PRESET or -/RRESET to select
radio channel.
3 Press
/
repeatedly until [AREA]
displays.
4 Press to confirm.
» The station is saved in the selected
channel.
4 Rotate to select:
•
•
•
•
[USA]
[LATIN]
[Europe]
[OIRT]
» The preset number on LCD screen
lights up and remains on.
Select tuner sensitivity
To receive more radio stations or only
stations with strong signal, you can adjust the
tuner sensitivity.
Tune to a preset station
1 Press BAND/ to select band.
2 Press +/PRESET or -/RRESET to select
the preset station.
1 Press OPTIONS repeatedly to select
[LOCAL SEEK].
2 Rotate to select a setting:
•
•
[LOCAL SEEK ON]: Only stations
with strong signal can be broadcast.
[LOCAL SEEK OFF]: Stations with
strong and weak signals can be
broadcast.
EN 13
1 Press to release the panel.
5 Play audio files
2 Push the left side of the panel rightward,
then pull the panel towards you to
disengage it from the chassis.
Play from USB
3 Insert the card into the card slot.
» The unit starts playing from the card
automatically.
Note
• Ensure that the USB device contains playable
music.
Insert the USB device
1 Slide the USB socket cover marked
to the left.
2 Insert the USB device into the USB
socket.
» The unit starts to play from the USB
device automatically.
Remove the card
1 Press to turn off the unit.
2 Press the card until you hear a click
sound.
» The card is now disengaged.
3 Remove the card.
Play options
•
•
•
To pause, press
.
To resume play, press again.
Remove the USB device
To skip to the previous/next track, press
/
.
1 Press to turn off the unit.
•
To search backward/forward rapidly
2 Remove the USB device.
within the current track, press
3 seconds.
/
for
Insert a card
Note
• This unit supports SD and SDHC cards.
14 EN
Search for an MP3/WMA track
Shuffle play
Search within the current folder
You can play the tracks in random order:
1 Press +SONG.
» The name of the current track is
displayed.
1 During play, press OPTIONS repeatedly
until [RANDOM] is displayed.
2 Rotate to select a setting:
•
•
•
[RANDOM OFF]: Turn off random
play.
[RANDOM FLD]: start random play
for all tracks in the current folder.
[RANDOM ALL]: start random play
for all tracks.
2 Rotate to select another track in current
folder.
3 Press to confirm.
Search in other folder
1 Press FOLDER -.
» The name of the current folder is
displayed.
Intro play
You can play the first 10 seconds of each
track.
2 Rotate to navigate through all folders.
3 Press to access the selected folder.
4 Rotate to select a track in the folder.
5 Press to start play.
1 During play, press OPTIONS repeatedly
until [INTRO] is displayed.
2 Rotate to select a setting:
•
•
•
[INTRO OFF]: Cancel intro play and
start normal play.
[INTRO FLD]: Start introl play in the
current folder.
[INTRO ALL]: Play the first 10
seconds of each track.
Tip
• To go back to upper level of a folder, press
.
View play information
1 During playing, press DISP repeatedly to
Connect external sound source
view:
•
•
•
•
•
•
Track number and elapsed play time
1 Connect the external sound source to
Folder
File
Title
Album
Artist
MP3 LINK socket with a 3.5 mm cable.
2 Press SOURCE repeatedly until [MP3
LINK] is displayed.
3 Operate the external component (refer
to the instructions supplied with the
external component).
Repeat play
1 During play, press OPTIONS repeatedly
until [REPEAT] is displayed.
2 Rotate to select a setting.
•
•
[REPEAT ALL]: play all tracks repeatedly.
[REPEAT TRK]: play current track
repeatedly.
[REPEAT FLD]: play all tracks in the
current folder repeatedly.
•
EN 15
2 Press EQ/Audio again to select a preset
6 Adjust sound
EQ setting:
•
•
•
•
•
•
•
•
[OPTIMAL] (optimal)
[FLAT] (flat)
Adjust volume
[POP] (pop)
[USER] (user)
[TECHNO] (techno)
[ROCK] (rock)
[CLASSIC] (classic)
[JAZZ] (jazz)
1 Turn clockwise/counterclockwise to
increase/decrease volume.
Mute
Switch music listening zone
You can turn off the sound of your audio.
1 During play, press
.
Philips’ innovative Zone technology enables
driver or passengers to enjoy music with the
best speakers balance and experience more
vivid spacial effect as the artist is intended to
create.You can switch the music listening zone
from driver to passengers for the best speaker
sound settings in car.
•
To resume sound, press again.
Tunr on/off Max Sound
ꢀ
6281'
1 Press
.
» The current setting is displayed.
1 Press ZONE.
» The current setting is displayed.
» [MAX ON]:The maximum sound
(max sound) function is on.
2 Rotate to select a setting:
» [MAX OFF]:The maximum sound
•
•
•
•
[ZONE ALL]
function is off.
[FRONT]
[F. LEFT] (Front left)
[F. RIGHT] (Front right)
3 Press OK to confirm the selection.
Turn Dynamic Bass Boost
(DBB) on/off
Other sound settings
1 Press DBB and the current setting is
displayed:
You can also adjust the preset EQ/Audio
settings.
» [DBB ON] :The Dynamic Bass Boost
(DBB) function is on.
1 Press EQ/Audio for 3 seconds.
» [DBB OFF] :The DBB function is off.
2 Press
/
repeatedly to select the item
2 Press DBB again to change the DBB
to be adjusted:
setting.
•
•
•
[BAS] (Bass) range: -7 to +7
[TRE] (Treble) range: -7 to +7
[BAL] (Balance) range: 12L to 12R.
(L= left speaker, R = right speaker)
[FAD] (Fader) range: 12R to 12F. (R
= rear speaker, F = front speaker)
Select preset equalizer
•
1 Press EQ/Audio.
» Current Equalizer setting is displayed.
3 Rotate to select a value/option.
16 EN
•
•
[DEMO ON] : Turn on the demo
mode. When the unit is idle for
more than 10 seconds, all functions
are displayed.
[DEMO OFF] : Turn off the demo
mode.
7 Adjust system
settings
Turn beep sound on/off
Each time you press a button, the unit beeps.
You can turn on or off this beep sound.
Reset
1 Press MENU.
You can reset the unit to its default setting.
2 Press
/
repeatedly until [BEEP]
1 Detach the front panel.
displays.
2 Press the reset button by using a ball-
3 Rotate to select a setting:
point pen or a similar tool.
•
•
[BEEP ON]: Turn on the beep
sound.
[BEEP OFF]: Turn off the beep
sound.
» Preset adjustments such as preset
channels and sound adjustments are
erased.
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
RESET
1 Press MENU.
2 Press
/
repeatedly until [BKO] is
displayed.
3 Rotate to select a setting:
•
•
•
[BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
[BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
[BKO OFF] : Never turn off the
screen.
Turn demo mode on/off
1 Press MENU.
2 Press
/
repeatedly until [DEMO]
displays.
3 Rotate to select a setting:
EN 17
8 Additional
information
Detach the front panel
You can detach the front panel to deter theft.
1 Press to release the panel.
2 Push the left side of the panel rightward.
Note
•
If the new fuse gets damaged again, there may
be an internal malfunction. Consult your Philips
dealer.
Remove the unit
You can remove the unit from the dashboard.
1 Detach the front panel and the trim plate.
2 Pull out the unit by using the disassembly
tools.
3 Pull the panel towards you to disengage it
from the chassis.
4 Store the panel in the supplied carry case
to protect it from dirt or damage.
Replace fuse
If the fuse is damaged,
1 Check the electric connection.
2 Buy a fuse that matches the voltage of the
damaged fuse.
3 Replace the fuse.
18 EN
Compatible USB devices:
9 Product
information
•
•
•
USB flash memory: USB 1.1 host with
interface reading all speed support (1.1,
2.0)
USB flash players: USB 1.1 host with
interface reading all speed support (1.1,
2.0)
Note
Memory cards (SD / SDHC)
• Product information is subject to change
without prior notice.
Supported formats:
•
USB or memory file format: FAT16,
FAT32
Power supply
12 V DC (11 V
- 16 V), negative
ground
•
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
•
•
•
WMA V4, V7, V8, V9 (L1, L2)
ISO9660, Joliet
Maximum title number: 512 (depending
on file name length)
Fuse
15 A
Suitable speaker
impedance
4 - 8
Maximum power output 45 W x 4 channels
•
•
Maximum album number: 255
Supported sampling frequencies: 2 kHz,
44.1 kHz, 48 kHz
Continuous power
output
22 W x 4 RMS
(4 10% T.H.D.)
•
•
•
Supported Bit-rates: 2~256 (kbps),
variable bit rates
Directory nesting up to a maximum of 8
levels
Number of albums/ folders: CD
maximum 99, USB maximum 199
Number of tracks/titles: maximum 999
ID3 tag v2.0 or later
File name in Unicode UTF8 (maximum
length 64 bytes)
Pre-Amp output voltage 2.5 V
Aux-in level
Dimensions (W x H
x D)
500 mV
188 x 58 x 140
mm
Weight
0.8 kg
•
•
•
Radio
Frequency range 87.5 - 108.0 MHz (100kHz
- FM
per step in auto search and
50kHz per step in manual
search)
Unsupported formats:
•
Empty albums: an empty album is an
album that does not contain MP3/WMA
files, and is not be shown in the display.
Unsupported file formats are skipped. For
example, Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
Frequency range 522 - 1620 KHz (9 kHz)
- AM (MW) 530 - 1710 kHz (10 kHz)
Usable sensitivity 8 μV
- FM
Usable sensitivity 30 μV
- AM(MW) (S/N
= 20 dB)
•
•
•
AAC, WAV, PCM audio files
DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
WMA files in Lossless format
•
EN 19
10 Troubleshooting
Caution
• Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site (www.
philips.com/support).When you contact Philips,
ensure that your apparatus is nearby and the
model number and serial number are available.
No power or no sound.
•
Car engine is not on. Turn the car engine
on.
Cable is not correctly connected. Check
connections.
•
•
•
•
Fuse is burnt. Replace fuse.
Volume is too low. Adjust volume.
If the above solutions cannot help, press
the RESET button.
Ensure that the track played is of a
compatible format.
•
Noise in broadcasts.
•
Signals are too weak. Select other
stations with stronger signals.
•
•
Check the connection of the car antenna.
Change broadcast from Stereo to mono.
Preset stations lost.
•
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Display show ERR-12
USB data error. Check the USB device.
•
Display show ERR-3
USB/SD data error.
•
20 EN
11 Glossary
M
MP3
A file format with a sound data compression
system. MP3 is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer 3. With the MP3 format, one CD-R or
CD-RW can contain about 10 times more
data than a regular CD.
S
SD
Secure Digital. A type of memory card with a
flash memory.
SDHC
Secure Digital High Capacity (SDHC) is a
type of flash memory card based on the SDA
2.00 specification. The SDA 2.00 specification
enables SD cards to reach higher capacities
from 4GB to 32GB, and growing.
W
WMA (Windows Media Audio)
An audio format owned by Microsoft, is a
part of Microsoft Windows Media technology.
Includes Microsoft Digital Rights Management
tools, Windows Media Video encoding
technology, and Windows Media Audio
encoding technology.
EN 21
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
CE130_78_UM_V1.0
|