Philips Clock Radio PDCC JW 0703 User Manual

1
)
English  
SIDE PANEL (See  
Clock Radio  
AJ100  
1
1
2
8 TUNING +/- tunes to radio stations  
SUPPLIED ACCESSORIES  
9
Pigtail improves FM reception  
0 DC 7.5V socket for AC/DC 7.5V adapter  
! SET AL / PRESET 1 sets AL time  
1 X certified AC 7.5V adapter  
(Input: 230-240V ~ 50Hz 30mA, Output: 7.5V  
250mA)  
User manual  
stores, recalls and shows station 1  
@ SET AL / PRESET 2  
sets AL time  
stores, recalls and shows station 2  
1
TOP AND FRONT PANEL (See  
)
# MIN + / PRESET 3  
adjusts the minutes for clock and alarm times  
1
REPEAT ALARM / BRIGHTNESS CONTROL  
switches off the alarm for a 9 minute period  
changes the brightness of the display illumination  
stops SLEEP function  
stores, recalls and shows station 3  
$ SET TIME / PRESET 4 sets the clock time  
5
6
3
4
stores, recalls and shows station 4  
% HR + / PRESET 5 adjusts the hours for the clock and alarm times  
stores, recalls and shows station 5  
2 DISPLAY  
shows clock/alarm times and status of the set  
^ VOLUME  
adjusts the sound level  
3 ALARM RESET / SLEEP  
stops active alarm for 24 hours  
activates the radio for sleep function  
displays/adjusts/switches off sleep timer  
switches on/off buzzer mode  
displays time  
7
4
ALARM  
5 RADIO ON/OFF  
Helpful hints: To avoid damage to the set, use only the adapter supplied!  
switches the radio on/off; displays radio frequency  
switches off sleep timer  
The type plate is located on the bottom of the set.  
!
@
#
8
9
6
7
ALARM  
switches on/off radio mode  
displays time  
RESET press if the set / display does not react to operation of any button  
This product complies with the radio interference requirements of the  
European Community.  
$
%
CAUTION  
- High voltage! Do not open.You run the risk of getting an electric  
shock. The machine does not contain any user-serviceable parts.  
0
- Modification of the product could result in hazardous radiation of  
EMC or other unsafe operation.  
^
SELF-POWERED BACK-UP  
RADIO  
Clock radio  
2
1
Press RADIO ON/OFF once to switch on the radio.  
Display shows the radio frequency of the last selected waveband briefly  
before returning to the clock time. Your preset station is also shown if you  
2
The self-powered back-up conveniently allows your preset stations, alarm and clock  
time settings to be stored for up to 3 minutes when there is a power interruption e.g.  
AC power failure. The complete clock radio and backlight illumination will be switched  
off.  
Meet Philips at the Internet  
are listening to a preset. (See  
)
2
3
Adjust the sound using VOLUME.  
To select preset stations, press the respective PRESET button (1-5) once or  
repeatedly.  
If power supply returns after 3 minutes and the display shows:  
English  
clock time blinking - indicates you need to re-adjust the clock time.  
BASIC FEATURES  
4
Press RADIO ON/OFF to switch off.  
Reset  
TUNING TO RADIO STATONS  
Automatic tuning  
3
4
Should your set receive external interference e.g. static electricity from carpets, thun-  
derstorms, etc. RESET allows you to clear all previous settings and start up again.  
Press TUNING +/- one second or more to tune to your station.  
Use a ballpoint pen to press the RESET hole found on the bottom of the set.  
The radio automatically tunes to a station of sufficient reception.  
Manual tuning  
Press TUNING +/- briefly or repeatedly until you reach the desired frequency.  
Illumination brightness  
Press REPEAT ALARM / BRIGHTNESS CONTROL once or more.  
The brightness of the display can be adjusted:  
Bright Low Off Bright  
To improve reception:  
For FM, extend and position the pigtail fully to obtain optimum reception.  
.
STORING AND USING PRESET STATIONS  
SETTING THE CLOCK  
You can store up to a total of 5 FM radio stations in the memory.  
The time is displayed using the 24-hour clock.  
1. Check the radio is switched off.  
2. Press SET TIME to enter the clock setting mode.  
3. Hold down or press HR + or MIN + repeatedly to set and adjust the hours and  
minutes respectively. Release HR + or MIN + when you have reached the cor-  
rect setting.  
1
2
Tune to your desired station (see TUNING TO RADIO STATIONS).  
To store a preset, hold down briefly on a PRESET button 1-5 until you hear a double  
beep.  
Display shows the preset number of your station.  
3
Repeat steps 1 and 2 to store your other stations.  
4
You can overwrite a preset station by storing another frequency in its place.  
Press a PRESET button 1-5 to listen to a preset station.  
4. Press SET TIME to confirm.  
 
Printed in China  
PDCC-JW-0703  

Philips CD Player AJ3150 User Manual
Philips Clock Radio AJ3225 79 User Manual
Philips DVD Recorder DVDR630VR User Manual
Philips DVD Recorder DVDR725H User Manual
Philips TV Receiver DCR 9001 02 User Manual
Planar Computer Monitor PE171 User Manual
Planet Technology Digital Camera ICA 107P User Manual
Planet Technology Network Router ADW 4401 A B User Manual
Pride Mobility Mobility Aid Sidekick User Manual
PYLE Audio Car Video System PLVSR10BK User Manual