Digital cordless phone
Digital cordless phone with answering machine
SE140
SE145
Welcome
Quick start guide
Connect
1
2
3
Install
Enjoy
Connect
1
A
Position the base
Tip
Placing the base too close to
large metal objects or electrical
appliances can impair the range
and sound quality.Thick walls
may also impair transmission of
signals to and from the base.
Place the base within reach of
the telephone line and power
sockets.
B
Connect the cables
C
Plug into the sockets
Plug the line cord and power
cable into the sockets at the
back of the base.
Plug the other end of the cables
into the wall sockets.
Warning
Leave the handset to charge for
at least 24 hours before first use.
Install
2
A
Install the batteries
C
Set up your phone
If the display shows the standby
screen, your phone is ready
to use.
Or
If the display shows CODE: you
must select the country code
for your area. Please see page15
in the main user guide for more
information.
Insert the batteries and slide the
battery door into place.
• Scroll
correct code.
• Press to confirm.
or
to display the
B
Charge handset
The handset and base will reset
to load the correct settings and
the standby screen is displayed.
SE140 – your phone is ready
to use.
SE145 – your phone is ready
to use. The answering machine
is automatically set to On and
ready to record messages.
Place the handset on the base to
charge the batteries.The battery
icon is displayed.
Enjoy
3
Make a call
Enter the phone number and
• Enter the phone number, then
press to confirm.
press
.
Answer a call
When the phone rings, press
Dial from the phonebook
.
• Press
, then scroll
or
to the entry you want.
End a call
• Press
to dial.
Press
.
Set date and time
Adjust earpiece volume
• Press
twice.
During a call, press
or
.
• Enter the date (DD-MM) and
time (HH:MM).
Redial last number
• Press
• Press
to confirm.
to return to standby.
Press
then
.
Change the ringer volume
and ringtone
SE145 only
• Press
• Press
.
Switch the answering
or
to adjust the machine off and on
ringer volume level (0=off).
• Press 0–9 to select the ringtone.
A sample ringtone is played.
Press
at the base.
Listen to your messages
• Press
to save the settings.
Press
.Your new messages
are played.
Or
Press and hold
Add entry to phonebook
• Press
then
.
to hear
• Choose a position in the
phonebook by entering a
all messages stored on your
machine.
2-digit number between 01–20.
Troubleshooting
For more solutions, see the full FAQs section in the main guide.
No dialling tone
The
icon is blinking
• Check the connections.
Unplug your phone then plug
back in the mains power.
• Batteries are empty –
charge the batteries for
at least 24 hours.
• Move closer to the base.
• Register the handset to
the base.
Caller Line Identification
does not work
• You may be too far from
the base – move closer.
• Use the line cable provided.
Check your subscription with
your network operator.
No ring tone
Poor sound quality
• Move closer to the base.
• Move the base at least one
If the icon is displayed, the
ringer is switched off. Increase
the ringer volume. For details,
metre away from any electrical see the main guide.
appliances.
Need help?
See the user manual that came with your Philips SE140 or SE145.
Copyright © 2007 Koninklijke Philips Electronics N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners.
Specifications are subject to change without notice.
Document order number: 3111 285 38011 (GB)
Printed in P.R.C.
|