Philips DVD Player DVD 765K User Manual

DVD 765K/751 English IFU  
1
2002.3.20, 1:32 PM  
 
” «  
Contents  
Introduction  
KARAOKE  
Environmental Information .....................................4  
Supplied accessories ..............................................4  
Safety Information ...................................................4  
Symbols Used in this booklet ...............................4  
General operation ...............................................15  
General setup .......................................................15  
Karaoke learning and language learning function  
........................................................................................15  
Functional overview  
Setup menu  
Front panel .................................................................5  
Rear panel ..................................................................5  
Remote control .......................................................6  
Basic operation ..................................................16  
General setup menu .......................................16  
Disc lock .................................................................16  
VFD DIM...................................................................16  
Program ..................................................................16  
OSD language .........................................................17  
Screen saver ............................................................17  
Speaker setup page .........................................17  
DOWNMIX mode ................................................17  
D.R.C .......................................................................17  
Center speaker .......................................................18  
Surround speaker ..................................................18  
Subwoofer speaker ...............................................18  
Center delay ...........................................................18  
Surround delay ......................................................18  
Bass Redirection .....................................................18  
Test tone ................................................................19  
Pro Logic setup ..................................................19  
SPDIF setup ........................................................19  
SPDIF OUT setup ..................................................19  
LPCM 96K mode ...................................................19  
Video Output setup ......................................20  
Video output ...........................................................20  
TV display ................................................................20  
TV type ...................................................................20  
Picture Source..........................................................21  
Progressive Scan......................................................21  
Brightness...................................................................21  
Preferences setup .............................................21  
Audio language .......................................................21  
Subtitle language .....................................................21  
Disc menu language ...............................................22  
Password ..................................................................22  
Parental control ......................................................22  
Default setup...........................................................23  
Smart Navigator ....................................................23  
Preparation  
Basic Connection ..................................................7  
Connecting to a TV .............................................7  
Connecting to Optional Equipment .....................8  
Conecting to a Audio System ..............................8  
Inserting batteries into the Remote Control ..9  
Using the Remote control ...................................9  
NTSC/PAL Conversion .........................................9  
Switching On ..........................................................10  
Operation  
Basic Playback ....................................................10  
General Operation ...........................................10  
Video control during playback ............................10  
Audio control during playback ............................11  
Repeat .......................................................................11  
Repeat A-B .............................................................11  
5 disc Resume .........................................................11  
OSD (On-Screen Display) ...........................12  
Title Selection .........................................................12  
Chapter Selection .................................................12  
Time Search ............................................................12  
Zoom ......................................................................12  
Special DVD Features .....................................12  
Playing a title .........................................................12  
Playing a chapter ....................................................12  
Camera Angle .........................................................12  
Changing the audio language ...........................12  
Subtitles ....................................................................12  
SpecialVCD & SVCD Features ..................13  
Playback Control (PBC) ...................................13  
Preview function ...................................................13  
Picture CD & MP3 CD Playback  
Function introduction.............................................14  
Basic playback .........................................................14  
Auto playback .........................................................14  
Selection playback ................................................14  
JPEG picture & MP3 playback together..............14  
Preview playback ...................................................14  
Playback with multi-angles ...................................14  
Playback Speed Control ........................................14  
Zoom picture ..........................................................14  
Specifications  
Specifications ...........................................................24  
Maintenance  
Maintenance ........................................................ 24  
Troubleshooting  
Troubleshooting ....................................................25  
3
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911  
 
DVD 765K/751 English IFU  
3
” «  
Introduction  
room, moisture may condense on the lens of the  
disc unit inside the DVD player. Should this occur,  
the DVD player would not operate normally.  
Leave the power on for about one hour with no  
disc in the DVD player until normal playback is  
possible.  
Thank you for purchasing this Philips DVD player.  
This Owner’s Manual explains the basic operation  
of this DVD player.  
Environmental Information  
All unnecessary packaging has been omitted.We  
have tried to make the packaging easy to separate  
into three materials: cardboard (box), polystyrene  
foam (buffer) and polyethylene (bags, protective  
foam sheet).  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
When the DVD player is switched to Standby  
mode, it is still consuming some power. To  
disconnect the system from the power supply  
completely, remove the AC power plug from the  
wall socket.  
Your DVD player consists of materials which can  
be recycled and reused if disassembled by a  
specialized company. Please observe the local  
regulations regarding the disposal of packaging  
materials, exhausted batteries and old equipment.  
Symbols Used in this Booklet  
The below symbols appear in some headings and  
notes with the following meanings:  
Supplied accessories  
– DVD-Video player  
– Remote control with Batteries  
– Audio cable  
– Video cable  
– Owner’s Manual  
Safety Information  
Helpful Hints!  
Before operating the DVD player, check that the  
operating voltage indicated on the typeplate is  
identical with the voltage of your local power  
supply. If not, please consult your dealer.  
Place the DVD player on a flat, hard and stable  
surface.  
Some DVD video discs require specific  
or allow only limited functions during  
playback.  
There must be sufficient room in front of the  
player for the drawer to be opened.  
In cabinet, allow about 2.5cm (1 inch) of free  
space all around the player for adequate  
ventilation.  
Do not expose your player to extreme of  
temperature or humidity.  
If the DVD player is brought directly from a cold  
to a warm location, or is placed in a very damp  
4
DVD616K IFU for /751 3141 016 18911  
2002.3.20, 1:33 PM  
DVD 765K/751 English IFU  
4
 
” «  
Functional Overview  
Front and Rear Panels  
B; PLAY/PAUSE  
– starts/interrupts playback  
POWER ON/OFF  
– switches the player On or Off  
9 STOP  
– stops playback  
PROGRESSIVE SCAN  
– switches the interlaced scan or  
progressive scan.  
T NEXT  
– goes to the next title/chapter/track  
S PREV  
– goes to the previous title/chapter/track  
DISPLAY  
– shows the current status of the player  
/ OPEN/CLOSE  
– opens/closes the disc tray  
Disc Tray  
LEVEL 1/2  
– MIC volume control 1/2 for karaoke  
MIC 1/2  
– MIC socket 1/2 for karaoke  
Mains Cord  
– connect to power outlet  
AUDIO OUT (Multi-Channel)  
– connect to an amplifier or  
receiver with multi-channel inputs  
Video out (Y PB PR)  
– connect to a TV with component video  
inputs  
AUDIO OUT (Left/Right)  
– connect to AUDIO inputs of an  
amplifier, receiver or stereo system  
Video out (CVBS)  
– connect to a TV with CVBS inputs  
Video out (S-Video)  
– connect to a TV with S-Video inputs  
Optical & Coaxial output  
– connect to a receiver with optical & coaxial inputs  
Caution:Do not touch the inner pins of the jacks on the rear panel. Electrostatic  
discharge may cause permanent damage to the unit.  
5
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911  
 
DVD 765K/751 English IFU  
5
” «  
Functional Overview  
Remote Control  
RETURN / TITLE  
– go back to previous menu /  
show title menu  
POWER B  
– switches DVD ON or to  
standby-on mode  
DISC MENU  
– access menu of a DVD disc  
/switch PBC on/off for VCD disc  
0-9 numerical key pad  
– select numbered items in a  
menu  
1 2 3 4  
– select an item in the menu/  
fast forward/backward, slow  
forward/backward  
DISPLAY  
– display information on TV  
screen during playback  
SYSTEM MENU  
– access or remove player’s  
system menu  
OK  
– acknowledge menu selection  
 
 
         
S
– go to a previous chapter or  
track  
T
– go to next chapter or track  
SUBTITLE  
STOP ( 9 )  
– subtitle language selector  
/switch off subtitle  
– stops playback  
PLAY ( B )  
ANGLE  
– starts playback  
– select DVD camera angle  
PAUSE ( ; )  
– pause playback temporarily /  
frame-by-frame playback  
ZOOM  
– enlarge video image  
AUDIO  
REPEAT  
– audio language selector  
– repeat chapter, track, title, disc  
KARAOKE  
– display Karaoke menu to set  
MIC on or off  
REPEAT (A-B)  
– repeat a specific segment  
PREVIEW  
– Preview the content of a track  
or whole disc  
KEY  
– display Karaoke menu to set  
key control  
VOCAL  
MUTE  
– choose audio channels or  
karaoke methods  
MODE  
– Disable or enable sound output  
– display karaoke menu  
Note:  
Press digit “1” for about 2 seconds to  
OPEN or CLOSE disc tray.  
6
DVD616K IFU for /751 3141 016 18911  
2002.3.20, 1:33 PM  
DVD 765K/751 English IFU  
6
 
” «  
Preparation  
Make one of the following connections,  
Basic Connections  
depending on the capabilities of your existing  
equipment.  
Please refer to the instruction books of yourTV,  
VCR, Stereo System or other devices as  
necessary to make the best connections.  
The following guidelines are options for the best  
picture and sound quality available on your DVD  
player.  
Caution: Component video and S-video  
can not work at the same time, so you  
have to set one of them to be active by the  
such way as shown on the chapter [Video  
output].  
Connecting to aTV  
If yourTV has a CVBSVideo input  
connector,  
0
0
Connect the CVBS VIDEO OUT on the DVD  
player to the CVBS VIDEO IN (cable supplied).  
Warning!  
If yourTV has a S-Video input connector,  
Connect the S-Video OUT on the DVD player to  
the S-Video IN (not supplied).  
– Never make or change connections with  
the power switched on.  
– Connect the DVD player directly to your  
TV, instead of eg.aVCR, to avoid  
distortion because DVD video discs are  
copy protected.  
If yourTV has a Component video  
(Y/PB/PR)input connector,  
Connect theY/PB/PR VIDEO OUT on the DVD  
player to the corresponding connector on theTV  
using the component video cable (not supplied).  
0
– Do not connect the DVD player AUDIO  
OUT to PHONO IN of your player.  
7
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911  
DVD 765K/751 English IFU  
7
 
” «  
Preparation  
Sound  
Connecting to a Audio System  
1 Digital audio connections provide the clearest  
sound. Connect one of the DVD player’s  
DIGITAL AUDIO OUT (COAXIAL or  
OPTICAL) to your amplifier or receiver.  
2 If digital connections are not possible, connect  
the DVD player’s red and white AUDIO OUT to  
your amplifier, receiver, stereo orTV.  
1 You can also listen to the sound of audio CDs  
and DVD video discs by connecting to an  
optional stereo systems.  
2 Connect the Left and Right AUDIO OUT on the  
DVD player to the Left and Right AUDIO IN on  
the stereo systems.  
Analog connection to a multi-channelA/V  
receiver with 6 channels audio in  
connectors  
Connecting to Optional  
Equipment  
A multi-channel decoder enables playback of  
DVDs recorded in multi-channel surround  
without the need of optional decoder. Connect  
the audio out jacks to the corresponding jacks of  
your A/V receiver with six cables. In the SPEAKER  
SETUP menu, select DOWNMIX to OFF and  
enable the 6CH decode function by the method  
introduced on the chapter [ Setup Menu ].  
Notes:  
A digital component with a built-in MPEG 2,  
Dolby Digital™ or DTS decoder allows you to  
enjoy the surround sound while producing the  
effect of being in a movie theater or a concert  
hall.  
If your receiver has a Dolby Digital™,  
MPEG 2 or DTS decoder,  
Connect to A/V receiver with digital  
coaxial or optical cable  
Connect the DIGITAL COAXIAL AUDIO OUT  
of the DVD player to the corresponding input on  
the receiver using the normal audio or video  
cable supplied.  
If the audio format of the digital output does  
not match the capabilities of your receiver,the  
receiver will produce a strong, distorted sound or no  
sound at all.  
8
DVD616K IFU for /751 3141 016 18911  
2002.3.20, 1:33 PM  
DVD 765K/751 English IFU  
8
 
” «  
Preparation  
Notes:  
AUTO can only be selected when using aTV  
that has both the NTSC and PAL systems.  
Slight picture distortions may occur due to this  
conversion.This is normal.Thus, theAUTO format is  
most suitable for the best picture quality.  
Inserting batteries into the  
Remote Control  
1
2
Open the battery cover.  
Insert batteries with the correct polarity as  
indicated by the + and - symbols inside the  
battery compartment.  
3
Close the cover.  
-
+
+
-
CAUTION!  
Remove batteries if they are exhausted  
or not to be used for a long time.  
Do not use old and new or different  
types of batteries in combination.  
Batteries contain chemical substances,  
so they should be disposed off properly and  
kept away from children.  
Using the Remote Control  
Direct the remote control at the remote sensor  
of the DVD player.  
Do not drop or give the remote control a shock.  
Do not leave the remote control near extremely  
hot or humid place.  
Do not spill water or put anything wet on the  
remote control.  
NTSC/PAL Conversion  
This player is equipped with a NTSC/PAL  
conversion feature to convert the video output  
of the disc to match yourTV system.The  
conversions supported are as below:  
Disc  
Output format  
Selected mode  
Type  
Format  
NTSC  
PAL  
AUTO  
NTSC  
PAL  
NTSC  
PAL  
NTSC  
DVD  
VCD  
PAL  
PAL  
PAL  
PAL  
NTSC  
NTSC  
NTSC  
NTSC  
PAL  
NTSC  
PAL  
9
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911  
 
DVD 765K/751 English IFU  
9
” «  
Operation  
Preparation  
Basic Playback  
Switching On  
1 Press POWER ON/OFF on the front panel.  
2 Press OPEN/CLOSE on the front panel to open  
disc loading tray.  
3 Place the chosen disc in the tray, with the label  
facing up.  
4 Press OPEN/CLOSE again to close the tray.  
After recognizing this disc the player begin to  
playback automatically.  
1
2
Switch on theTV and DVD player.  
Set theTV to the correctVideo IN channel. (eg.  
EXT1, EXT2,AV1, AV2, AUDIO/VIDEO, etc.  
Please refer to to yourTV owner’s manual for  
detail)  
The player display lights and the default screen  
appears on theTV.  
If you are using an external equipment (eg. audio  
system or receiver), turn them on and select the  
appropriate input source that was used to  
connect to the DVD player output. Refer to the  
equipment owner’s manual for detail.  
3
Note:  
IfTV set has Progressive Scan video input, please  
connect the component video cables between  
DVD player andTV set. for best video  
performance, then  
Press PROGRESSIVE SCAN on the front panel  
to select progressive scan mode.  
Notes:  
DVDs may have a region code.Your player will  
not play discs that have a region code different  
from the region code of your player.  
0
If ‘Disc Lock’ is set to ON and the disc inserted  
0 The DVD player will reboot, when you switch  
between progressive scan and interlaced scan by  
pressing PROGRESSIVE SCAN key on the front  
panel.  
is not authorized, the 4-digit code must be entered  
and/or the disc must be authorized (see ‘Disc  
Lock’).  
General operation  
Video control during playback  
DVD VCD  
CD  
STOP  
1 You can resume the play from the point at which  
you stopped last time, if you just press the STOP  
key once. It will start from the beginning if you  
press the STOP key twice to stop playback.  
DVD VCD  
CD  
PAUSE/STEP  
1 To get a still picture, press PAUSE key during  
playback.  
2 To step forward to the next frame picture, press  
PAUSE key again.  
3 To resume normal playback, press PLAY.  
DVD VCD  
CD  
SEARCH  
1 To search the contents in fast speed, press the 2  
or 1for fast forward/backward searching.  
2 Press the 1or 2again to increase the speed for  
searching.  
3 Press PLAY to return to the normal playback.  
10  
DVD616K IFU for /751 3141 016 18911  
2002.3.20, 1:33 PM  
DVD 765K/751 English IFU  
10  
 
” «  
Operation  
Slow Motion  
Repeat  
DVD  
DVD  
1
To get slow motion effect during playback, press  
3 or 4.  
Repeat chapter/title/disc  
To repeat the current chapter, press REPEAT.  
To repeat the current title, press REPEAT a  
second time.  
2 Press 3 or 4again, you can get different playback  
forward/backward speeds.  
3 Press PLAY to return to the normal play back.  
To exit Repeat mode, press REPEAT again.  
VCD  
VCD  
CD  
Repeat track/disc  
1
To get slow motion effect during playback, press  
3.  
To repeat the current track, press REPEAT.  
To repeat the entire disc, press REPEAT a second  
time.  
2 Press 3again, you can get different playback  
forward speeds.  
3 Press the PLAY key to return to the normal play  
To exit Repeat mode, press REPEAT again.  
back.  
NOTE:  
DVD  
VCD  
CD  
Repeat A-B  
-The SLOW BACKWARD function is not available  
for the SuperVCD/VCD/CD disc.  
DVD-Video Discs: repeat a sequence in a  
title  
Video and Audio CDs: repeat a sequence in a  
track  
1 Press REPEAT A-B at your chosen starting point.  
2 Press REPEAT A-B again at your chosen end  
point.  
Audio control during playback  
DVD VCD  
CD  
MUTE  
1 Press the MUTE key to disable the sound output.  
2 Press the MUTE key again to remove the mute.  
The repeat sequence begins.  
3 To exit the sequence, press REPEAT A-B.  
SURROUND SOUND  
DVD VCD  
CD  
5 Disc Resume  
The DVD player can reproduce virtual surround  
sound effect.  
1 Press the Display key on the remote control.  
2 Press 1 2 to highlight option 3D  
3 Press 3 4 to switch it on or off.  
DVD  
VCD  
CD  
This player can resume the playback of last 5  
discs, which should be unload at stop mode.  
1 Load one disc, which is one of last 5 discs.  
2 Press PLAY when DVD player is recognizing the  
disc. if the information of this disc has been stored  
in the memory of DVD player, it will be played  
back from the point you stopped last time.  
NOTE: Before select the surround sound effect,  
you must set DOWNMIX at the mode of  
STEREO, LT/RT or VSS( please refer to SPEAKER  
SETUP PAGE in SETUP MENU).  
Audio channel selection  
VCD  
CD  
1 SVCD has two stereo audio channels which are  
used for playing karaoke or the audio language  
selection. ( for instance, you can choose one  
channel for only the music background of the  
song while you play the karaoke.)  
2 Press the AUDIO key on the remote control to  
select the audio channels you want.  
3 VCD has only one stereo audio channel, you can  
select mono left audio channel or mono right  
audio channel by pressing the AUDIO key on the  
remote control.  
11  
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911  
DVD 765K/751 English IFU  
11  
 
” «  
Operation  
OSD (On-Screen Display)  
DVD VCD  
Special DVD Features  
DVD  
Playing a title  
This function will provide some information  
about your playing disc on the screen.  
Press DISPLAY key on the remote control.  
A DVD disc may have one or more titles.This  
depends on the content (a movie, video clips, a  
drama series, etc) on the disc.  
0
0 After you load a disc, information about the  
content shows on the screen waiting for your  
selection. Likewise, you can press the TITLE key  
on the remote control to turn back to the title  
menu during playback.  
Title Selection  
1 Press 1 2 to highlight optionTitle number.  
2 Press 3 4 to change the title number.  
DVD player will playback selected title.  
Chapter Selection  
Press the appropriate numerical key or 341  
2 keys on the remote control to highlight your  
selection.  
1 Press 1 2 to highlight option chapter number.  
2 Press 3 4 to change the chapter number.  
Press OK key, DVD player will playback  
selected chapter.  
Press the OK key to confirm it.  
DVD  
Playing a chapter  
Time Search  
While you have selected a title, it may include  
one or more chapters.  
0
Press 1 2 to highlight time display area.  
For DVD discs:  
0 Any time you want to watch another chapter  
during playback, press DISC MENU key to turn  
back to the chapter menu(If disc has chapter  
menu).  
CC means the time has been played back of  
current chapter. CR means the time is remainder  
of current chapter.TC means the time has been  
played back of current titile.TR means the time is  
remainder of current title.  
Press the appropriate numerical key or 341  
2 keys on the remote control to highlight your  
selection.  
Press the OK key to confirm it.  
After a chapter has been selected, you also can  
press the ¡1 or 2™ key to make a change.  
For SuperVCD orVCD disc  
DC means the time has been played back of  
the disc. DR means the time is remainder of the  
disc.TC means the time has been played back of  
current track.TR means the time is remainder of  
current track.  
Press the 1 2 keys to highlight the itemTIME and  
you can play from any point of the disc.  
Enter hours, minutes and seconds from left to  
right in the time edit box using remote control  
numerical key pad.( e.g. 0:34:27)  
DVD  
Camera Angle  
0
Some discs contain scenes which have been shot  
simultaneously from various angles.  
This DVD player allows you to select the desired  
camera angle.  
Press the OK key to confirm it.  
To aVCD disc, the selected point must be  
within the current track.  
0
pressing the ANGLE key on your remote control.  
NOTE: The function is available for the DVD discs  
which have recorded several angles movie.  
DVD  
Zoom  
VCD  
DVD  
Changing the audio language  
0 Press AUDIO repeatedly to select the different  
languages.  
The Zoom function allows you to enlarge the  
video image.  
1 Press the ZOOM key to activate the function.  
Use the 341 2 key to view the rest part of  
the zoomed picture.  
Playback will continue.  
2 Press the ZOOM key again to return to the  
original size.  
NOTE: The function is activated, only if the DVD is  
recorded with multi-languages audio tracks.  
DVD  
Subtitles  
0 Press SUBTITLE repeatedly to select the  
different subtitles.  
0 Press SUBTITLE for about 2 seconds to switch  
subtitle on or off.  
NOTE: -This function is NOT available for PAL  
DVD discs or some DVD discs.  
-This function is invalid in the Progressive Scan  
video output mode.  
NOTE: The function is activated, only if the DVD or  
SuperVCD is recorded with multi-subtitles.  
12  
DVD616K IFU for /751 3141 016 18911  
2002.3.20, 1:33 PM  
DVD 765K/751 English IFU  
12  
 
” «  
Operation  
VCD  
SpecialVCD & SVCD Features  
Preview function  
Playback Control (PBC)  
PBC function can make you enter the index  
menu which is used to select a track after loading  
the SVCD orVCD disc.  
At STOP mode, press the PREVIEW key to enter  
previewing menu.  
+ shown as the left  
If you want to activate the function,  
1 press the DISC MENU key on the remote control  
to set the PBC On.  
Pay attention to the hint on the screen.  
2 Use the ¡1 or 2™ key to select the page you  
like.  
1
Disc introduction  
Select this function, DVD player will play back  
every track several seconds with full screen, that  
makes you understand the content of disc.  
- Press the numerical key 1.  
If the items of the index menus are numbered,  
press the appropriate numerical key on the  
remote control.  
- Press OK key to confirm it.  
- Press STOP key to quit previewing.  
2
Disc preview  
press the OK key to confirm.  
This function will minify the picture of one track  
enough to display every nine of these tracks on  
the full screen which will help you to preview a  
disc.  
3 Press the RETURN key to enter the index menu  
during the play back.  
NOTE:  
The content of the index menu depends on the  
disc. Please refer to the discs instruction for detail.  
If the disc doesn't include the PBC information,  
this function will have no effect.  
If you want to skip the index menu and  
playback directly from the beginning,  
1 press the DSIC MENU key on the remote control  
to switch off the function.  
- Press the numerical key 2.  
- Press OK key to confirm it.  
- Select the other tracks beyond this page by  
pressing the ¡1 or 2™ key.  
- Press the numerical keys to choose the desired  
track.  
For the karaoke discs, even if PBC function is  
off, you still can use the ¡1 or 2™ key to select  
the track you like.  
- Press the OK key to confirm it.  
3
Track preview  
This function is used to divided a single track into  
nine parts and display them on the full screen  
which will help you to preview the selected track.  
- Press the numerical key 3.  
- Press the OK key to confirm it.  
- Preview other tracks, press the ¡1 or 2™ key.  
- Press numerical key to choose the start point.  
- Press the OK key to playback the start point.  
4
Quit preview function  
- Press the numberical key 4.  
- Press the OK key to exit.  
13  
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911  
 
DVD 765K/751 English IFU  
13  
” «  
Picture CD & MP3 CD Playback  
2
In the JPEG playback menu, press the 1 2 3 4  
key to select the folder you want and press the  
OK to open it.  
Press the 1 2 3 4key to highlight your  
favourite file and press the OK key to confirm.  
Function introduction  
This player can playback JPEG format pictures and  
MP3 files and especially can be compatible with  
Kodak Photo CD.  
3
Picture CD is a disc with the collection of JPEG  
format pictures, as customers prefer, and all  
extension filename should be ended with 'JPG'.  
The CD can be burned on every computer, and  
pictures maybe from digital camera or scanner. If  
the customers prefer, they may make this CD  
become a DigitalAlbum.  
JPEG picture & MP3 playback  
together  
Select the WITH MENU item at the SMART  
NAV menu.  
Select a MP3 music under the operation of [  
Selection playback ].  
Press the REPEAT A-B key.  
“MUSIC SLIDE SHOW MODE” displays on  
TV screen.  
Press the REPEAT A-B key again.  
“MP3 IS SELECTEDdisplays onTV screen.  
Open a folder with JPEG pictures under the  
instruction of [ Selection playback ].  
Highlight a picture and press PLAY or OK key.  
MP3 and JPEG pictures will playback together.  
The JPEG pictures in the current folder will  
playback in sequence, untill the last picture in the  
folder is played back.  
NOTE: If the MP3 music has been played back  
over ahead of JPEG pictures,the music will be  
played back repeatly till the pictures are playback  
over. Otherwise, the MP3 music will be cutoff  
automaticly along with the JPEG pictures over.  
1
2
For playing this Digital Album (picture CD)  
conveniently, our DVD player can  
Playback pictures one by one automatically.  
Display the picture customer preferred.  
Zoom the picture.  
Rotate the picture.  
Flip the picture vertically or horizontally.  
Control the playback speed.  
0
0
0
0
0
0
3
4
0 Album and track selection.  
0
0
0
0
Repeat (disc / album / track / picture).  
Nested directory levels supported to 8 levels.  
Maximum album numbers possible is 32.  
Maximum MP3 Tracks Programmable is 96.  
Basic playback  
1
2
At the state ofNO DISC”, press the SYSTEM  
MENU key to open the setup menu.  
Press the 3 4key to highlight the PREFERENCE  
item.  
Preview function  
1
Press the PREVIEW key at the STOP mode.You  
will see nine pieces of minified pictures on the  
screen.  
3
4
Press OK to open the PREFERENCE menu.  
Press the 3 4to highlight the SMART NAV  
menu.  
2
3
Press the 2™ or ¡1 key to display the next or  
the previous nine-picture-preview.  
Press the 1 2 3 4key to highlight one of them  
and press the OK to display.  
5
6
7
Press OK to open the menu.  
Press the 2key to enter the menu.  
Press the 3 4key to highlight the NO MENU  
or WITH MENU item.  
NO MENU: playback all images in sequence  
automatically, and MP3 musics will be played prior  
to pictures.  
WITH MENU:playback images in the selected  
folder.  
Playback with multi-angles  
When displaying one picture onTV screen  
Press the 3 4 1 key to get different effects.  
3key: Flip the picture vertically.  
4key: Flip the picture horizontally.  
1key: rotate the picture anti-clockwise.  
0
8
Press the OK key to confirm your selection.  
The special function during playback:  
Auto playback  
After you open one picture, the player can  
playback each file in sequence automatically.  
Playback Speed Control  
0
Press the 2key to adjust the playing back speed.  
Zoom picture  
0
0
Press the ZOOM key to display the picture with  
different scales.  
Press the 1 2 3 4 key to view the rest of the  
zoomed picture.  
Selection playback  
Press the numerical key to select your favourite  
file directly.  
1
14  
DVD616K IFU for /751 3141 016 18911  
2002.3.20, 1:33 PM  
DVD 765K/751 English IFU  
14  
 
” «  
KARAOKE  
Note:  
General setup  
If you want to switch MP3 musics or pictures  
during automatical playback,please press the valid  
number as showed on theTV screen after the DVD  
player indexed the MP3 musics and pictures  
included in the loaded disc.  
Press MODE to display karaoke  
menu (Karaoke menu will  
disappear if you do not press any  
key in a minute.  
KEY CONTROL  
1
2
Press 1 2 to highlight the option KEY.  
Press 3 4to adjust the pitch to adopt your  
voice.  
General operation  
SMART  
DVD765K DVD VIDEO PLAYER  
PICTURE  
STANDBY-ON  
MIC  
1
MIC  
2
LEVEL  
1
LEVEL  
2
Volume  
1
2
Press 1 2 to highlight the optionVOLUME.  
Press 3 4to adjust theVOLUME to adopt your  
voice.  
1 Connect microphone to MIC1 or MIC2 or to  
both sockets. Be sure the player has been  
properly connected to yourTV or audio system.  
2 Press KARAOKE on the remote control to  
display karaoke menu.  
ECHO  
1
2
Press 1 2 to highlight the option ECHO.  
Press 3 4to adjust the echo level.  
karaoke menu appears onTV screen, and the  
option ‘MIC’ is highlighted.  
0
Press 3 4to switch on karaoke function.  
Audio channels option  
With this function, you can choose audio channels  
during karaoke is available.  
PressVOCAL on the remote control to choose  
STEREO, LEFT VOCAL, RIGHT VOCAL, MONO  
RIGHT or MONO LEFT .  
3 Load a karaoke disc and press PLAY to playback.  
4 Turn on the microphone which is connected with  
the DVD player and you can enjoy the Karaoke  
immediatly.  
1
LEFTVOCAL or RIGHTVOCAL options can  
fade out the original vocal.  
Karaoke learning and language  
VCD  
learning function  
To adjust the volume of microphone, turn the  
knob LEVEL1 or LEVEL2 on the right of front  
panel.  
1
Press MODE to display karaoke menu.  
Make sure you have set MIC on.  
Press 1 2to highlight RECORD OFF.  
Press 3 to set RECORD on.  
Press 3 again to start recording from the point  
you perfer.  
2
3
4
5 If you want to finish karaoke, press KARAOKE on  
the remote control to display karaoke menu.  
karaoke menu appears onTV screen, and the  
option ‘MIC’ is highlighted.  
DVD player will record your voice and  
original karaoke music.  
Press 3 again to end recording.  
DVD player will playback the recording three  
times in total to let you make a comparasion.  
Follow the instruction of step4 to step5 to  
record other sequence.  
0
Press 3 4to switch off karaoke function.  
NOTE: Please set the option DOWNMIX to LT/RT,  
VSS or STEREO before switching on Karaoke  
function.  
5
6
7 As soon as you finish recording, press 4 to quit  
Karaoke learning and language learning function.  
Note:Keeping highlight cursor on RECORD option  
will allow you to record by pressing 3 , and 4 to  
quit. Quit karaoke menu and 3 or 4 will get slow  
motion effect.  
15  
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911  
 
DVD 765K/751 English IFU  
15  
” «  
Setup Menu  
Program (not available for DVD discs)  
1 To choose the PROGRAM item, press the 34  
keys.  
Basic operations  
1
Press SYSTEM MENU in the  
STOP mode to enter the Setup  
Menu.  
2
Press OK to open its submenu.  
3 Press the 2 key to move the cursor to the field of  
the submenu to choose the item ON.  
ON:Enter the PROGRAM  
item.  
2
3
Press the OK key to open the  
next level submenu or confirm your selection.  
Press the 1 2 keys to enter the submenu or  
return to the previous menu.  
4
Press OK to enter the program page.  
4 Press the 34 keys to highlight the desired  
menu.  
Input your favorite track  
Input valid track number by pressing the  
numerical keys.  
Press the 1 234 keys to move the cursor to the  
next selected position.  
5
Press SYSTEM MENU to quit the setup menu.  
When you quit the setup menu, the settings  
will be stored in the player’s memory even if the  
player is switched to power off.  
1
2
3 Repeat the steps above to input another track  
General setup menu  
number until the whole program is completed.  
Some settings are needed in this menu. they are:  
DISC LOCK, PROGRAM, OSD LANGUAGE  
and SCREEN SAVER.  
Exclude a track  
1
2
Press the 1 234 keys to move  
the cursor to track you want to  
exclude.  
Input an invalid track number to  
cancel this track.  
Follow the steps below:  
1 Press the SYSTEM MENU key to enter the  
setup menu.  
2 Press the 34 keys to choose the GENERAL  
SETUP menu.  
Cancel all tracks  
3 Press the OK key to confirm selection.  
1
2
Press the 1 234 keys to move the cursor to the  
CLEAR button.  
Press OK, all tracks will be cancelled.  
Disc lock  
When the disc is locked, the player will store its  
typical code into the memory for the future  
identification. For the next playback, the DVD  
player will prompt to enter the password.  
1 Press the 34 keys to highlight the DISC LOCK  
item in the GENERAL SETUP menu.  
2 Press the OK key.  
3 Now you can input your favorite tracks again.  
Playback tracks  
When programing is completed,  
Press the 1 234 keys to move the cursor to the  
PROG button.  
Press OK.  
1
2
DVD player will playback the selected  
program under the programed sequence.  
3 Enter its submenu by pressing  
the 2 key.  
- LOCK: Lock the disc being played.  
- UNLOCK: unlock the disc.  
4 Press the 1 key to return to the GENERAL  
SETUP menu.  
Stop the program playback  
At the PROGRAM page,When programing is  
completed,  
Press the 1 234 keys to move the cursor to the  
QUIT button.  
1
2
NOTE:  
Press the OK key to quit this menu.  
1. When playback a locked disc, the DVD player  
will prompt to enter your password or 3308  
(default) password.  
2. To change the password , refer to the option  
PASSWORD in the PREFERENCE menu .  
VFD Dim  
This function is used to adjust the brightness of  
VFD on the front panel.  
Press the 34 keys to highlight VFD DIM in the  
GENERAL SETUP menu.  
1
2
3
Press OK.  
Enter its submenu by pressing the 2 key.  
16  
DVD616K IFU for /751 3141 016 18911  
2002.3.20, 1:33 PM  
DVD 765K/751 English IFU  
16  
 
” «  
Setup Menu  
REDIR, which gives the setup  
system to reproduce  
4
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
high quality surround sound.  
Press SYSTEM MENU.  
Press the 34 keys to highlight the SPEAKER  
SETUP item.  
100: make theVFD brighter than normal.  
70: standard brightness  
40: make theVFD dimness.  
1
2
3
Press OK to confirm.  
5
6
Press OK to confirm.  
Press the 1 key to return to the GENERAL  
SETUP menu.  
DOWNMIX mode  
Press the 34 keys to highlight  
the DOWNMIX item.  
Press OK to open its submenu.  
Enter its submenu by pressing the 2 key.  
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
1
OSD language  
There are two languages available for information  
displayed onTV screen.  
Press the 34 keys to highlight OSD LANG in  
the GENERAL SETUP menu.  
Press the OK key.  
Enter its submenu by pressing  
the 2 key.  
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
ENGLISH: OSD information will be displayed  
in English.  
CHINESE: OSD information will be displayed  
in Chinese.  
Press the OK key to confirm.  
Press the 1 key to return to the GENERAL  
SETUP menu.  
2
3
4
1
2
3
0
LT/RT  
This item will be used only if your DVD player  
is connected with Dolby Prologic decoder.  
Meanwhile, the DVD player can output Dolby  
Prologic signals.  
4
0
STEREO  
This item will help to downmix the signal of  
Dolby Digital and DTS into stereo signals directly  
outputing from L/R port.  
5
6
0 VSS  
This function is to make DVD player  
reproduce virtual surround sound effects.  
OFF  
0
Screen saver  
This function is used to turn on or off the screen  
saver.  
Press the 34 keys to highlight SCR SAVER in the  
GENERAL SETUP menu.  
Press OK.  
Disable the DOWNMIX mode so that you  
can setup your speaker system.  
Press OK.  
Press the 1 key and return to the SPEAKER  
SETUP menu.  
5
6
1
2
3
Enter its submenu by pressing  
the 2 key.  
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
ON: At STOP mode, if nothing is happened  
within 5~6 minutes, screen saver will turn on .  
OFF: Screen saver is disable.  
Press OK to confirm.  
Press the 1 key to return to the GENERAL  
SETUP menu.  
D.R.C. (Dynamic Range  
Compression)  
DVD player will compress dynamic range of  
sound effect output, when you do  
not want to disturb your neighbours and your  
famliy in midnight.  
Press the 34 keys to highlight D.R.C.,  
Press OK to open its submenu.  
Enter its submenu by pressing the 2 key.  
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
4
1
2
3
4
5
6
Speaker setup page  
This menu contains setup options of your speaker  
system, such as DOWNMIX,  
D.R.C.(Dynamic Range Compression), CENTER,  
REAR, SUBWOOFER, CENTER  
ON: Enable D.R.C.  
OFF:Disable D.R.C.  
Press OK.  
Press the 1 key to return to the  
SPEAKER SETUP menu.  
5
6
DELAY, REAR DELAY ,TEST TONE and BASS  
17  
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911  
 
DVD 765K/751 English IFU  
17  
” «  
Setup Menu  
4
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
ON: Enable signal output for subwoofer  
speaker.  
Center speaker  
This function is effective only when DOWNMIX  
is OFF.When you are using a center speaker, set  
to CENTER on in the menu.  
OFF: Disable signal output for subwoofer  
speaker.  
1
Press the 34 keys to highlight  
the CENTER item.  
5
6
Press OK.  
2
3
4
Press OK to open its submenu.  
Enter its submenu by pressing the 2 key.  
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
Press the 1 key to return to the SPEAKER  
SETUP menu.  
ON:Enable signal output for center speaker.  
OFF: Disable signal output for center speaker.  
Press OK.  
Press the 1 key and return to the SPEAKER  
SETUP menu.  
Center delay  
Set CENTER to on in the setup menu to delay  
the sound reproduction from the  
center speaker.  
5
6
1
Press the 34 keys to highlight  
the CNTR DELAY item.  
2
3
Press OK to open its submenu.  
Enter its submenu by pressing the  
2 key.  
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
Press OK.  
Surround speaker  
This function is effective only when DOWNMIX  
is OFF.When you are using rear surround speaker,  
set REAR on in the menu.  
4
1
Press the 34 keys to highlight  
the REAR item.  
Press OK to open its submenu.  
Enter its submenu by pressing  
the 2 key.  
5
6
Press the 1 key and return to the SPEAKER  
SETUP menu.  
2
3
4
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
ON: Enable signal output for surround speaker.  
OFF: Disable signal output for surround  
speaker.  
Surround delay  
Set REAR on then you can setup this option to  
delay the sound reproduction from the  
surround speakers.  
1
Press the 34 keys to highlight  
the REAR DELAY item.  
Press OK to open its submenu.  
Enter its submenu by pressing the  
2 key.  
5
6
Press OK.  
Press the 1 key to return to the SPEAKER  
SETUP menu.  
2
3
4
Move the cursor by pressing the  
34 keys to highlight the requisite item.  
Press OK.  
Press the 1 key and return to the SPEAKER  
SETUP menu.  
Subwoofer speaker  
This function is effective only when DOWNMIX  
is OFF.When you are using a  
subwoofer speaker, set SUBWOOFER on in the  
menu.  
5
6
1
Press the 34 keys to highlight  
the SUBWOOFER item.  
Bass Redirection  
2
3
Press OK to open its submenu.  
Enter its submenu by pressing  
the 2 key.  
This option can reproduce bass effect from front  
speakers and center speaker by transferring bass  
signals to them instead of subwoofer.  
Press the 34 keys to highlight the item BASS  
REDIR.  
1
2
3
4
Press OK to open its submenu.  
Enter its submenu by pressing 2.  
Pressing 34 to highlight the requisite item.  
- ON: eable bass signal redirection.  
- OFF: disable bass signal redirection.  
Press OK.  
5
18  
DVD616K IFU for /751 3141 016 18911  
2002.3.20, 1:33 PM  
DVD 765K/751 English IFU  
18  
 
” «  
Setup Menu  
Test tone  
SPDIF setup  
This item is used to check the connection of the  
audio system.WhenTESTTONE is ON, a fizzy  
sound from every speakers will appear.  
Press the 34 keys to highlight theTESTTONE  
item.  
In this menu, you can set up digital audio format  
outputing from coaxial and optical terminals.  
Press SYSTEM MENU to enter the SETUP menu.  
Press the 34 keys to choose the SPDIF SETUP  
menu.  
1
2
1
2
3
Press OK to open its submenu.  
Enter its submenu by pressing  
the 2 key.  
Move the cursor by pressing  
the 34 keys to highlight the  
selected item.  
3
Press OK.  
NOTE:  
4
SPDIF is the abbreviation of Sony Philips Digital  
Interface which is a protocol of digital data  
transfering.  
ON: Enable test tone.  
OFF: Disable test tone.  
Press OK.  
Press the 1 key and return to the SPEAKER  
SETUP menu.  
SPDIF OUT setup  
Press the 34 keys to highlight the SPDIF OUT  
item.  
Press OK to open its submenu.  
Enter its submenu by pressing the 2 key.  
Press the 34 keys to highlight the selected item.  
RAW: Original digital signals  
output.  
PCM: Convert to PCM signals  
to output.  
Press OK.  
Press the 1 key and return to the SPDIF SETUP  
menu.  
5
6
1
2
3
4
Pro Logic setup  
This item is used for settings of Dolby Pro Logic  
signals.  
Press SYSTEM MENU to enter  
the SETUP menu.  
Press the 34 keys to choose the PRO LOGIC  
SETUP menu.  
Press OK to enter.  
Press the 34 keys to highlight the PRO LOGIC  
item.  
Press OK to open its submenu.  
Enter its submenu by pressing the 2 key.  
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
ON: Output the Dolby Pro  
Logic signals.  
OFF: Forbid the Dolby Pro  
Logic signals to send output.  
AUTO: Whether PRO LOGIC is ON or OFF, it  
depends on the audio format of the disc being  
played back.  
1
2
5
6
3
4
LPCM 96K mode  
In this menu, you can set up sampling rate to  
decode LPCM audio.  
Press the 34 keys to highlight the LPCM 96K  
item.  
Press OK to open its submenu.  
Enter its submenu by pressing  
the 2 key.  
Move the cursor by pressing the  
34 keys to highlight the  
selected item.  
ON: Detect the loading disc for appropriate  
sampling rate.  
OFF:The decoding process is under the  
sampling rate of 48KHz.  
Press OK.  
5
6
7
1
2
3
4
8
9
Press OK.  
Press the 1 key and return to the SPEAKER  
SETUP menu.  
5
6
10 Press the 34 keys to highlight the MAIN PAGE  
Press the 1 key to return to the SPDIF SETUP  
menu.  
and confirm by pressing OK.  
19  
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911  
 
DVD 765K/751 English IFU  
19  
” «  
Setup Menu  
Video Out Setup  
There are items included in VIDEO OUT PAGE  
menu asTV DISPLAY, VIDEO OUTPUT, TV  
TYPE, PICTURE SOURCE, PROGRESSIVE SCAN,  
BRIGHTNESS.  
16:9  
1
2
3
Press STOP twice.  
4:3  
Letter Box  
Press SYSTEM MENU to enter its menu.  
Highlight theVIDEO OUTPUT SETUP item by  
pressing the 34 keys.  
4
Press OK.  
4:3  
Pan Scan  
Video output  
In this menu, you can setup the video output for  
high quality video performance.  
Press the 34 keys to highlightVIDEO OUTPUT  
in theVIDEO OUTPUT SETUP menu.  
Press the OK key to open its submenu.  
Press the 2 key to highlight the item of the  
submenu.  
1
Setup the item as follows,  
Press the 34 keys to highlight the TV DISPLAY  
item in the GENERAL SETUP menu.  
Press the OK key.  
1
2
2
3
3 Enter its submenu by pressing  
the 2 key.  
4 Move the cursor by pressing the 34 keys to  
highlight the selected item.  
4 Press the 34 keys to choose an item.  
S-VIDEO:Video signals will send an output  
from the S-VIDEO on the rear panel of the DVD  
player.  
5
6
Press OK.  
YPBPR: If yourTV set is equiped withY/PB/PR  
input, you can choose for high quality picture.  
Press OK.  
Press the 1 key to return to the GENERAL  
SETUP menu.  
NOTE: Any selection will not influence the signal  
output of composite video.  
Press the 1 key to return to the GENERAL  
SETUP menu.  
5
6
TV type  
Before viewing the DVD orVCD, ensure that the  
PAL or NTSC setting of the system matches your  
TV set.  
1
2
Press the 34 keys to highlight  
TVTYPE in the GENERAL  
SETUP menu.  
TV display  
Select the aspect ratio of the TV to be connected.  
16:9 when you connect a wide-screenTV to  
the DVD player.  
4:3 LETTER BOX when you connect a  
normalTV to the DVD player. Displays a wide  
picture with bands displayed on the upper and  
lower portions of theTV screen.  
4:3 PAN SCAN when you connect a normal  
TV to the DVD player. Displays the wide picture  
on the wholeTV screen with a portion  
automatically cut off.  
Press OK.  
3 Enter its submenu by pressing the 2 key.  
4 Move the cursor by pressing the 34 keys to  
highlight the requisite item.  
5
6
Press OK.  
Press the 1 key to return to the GENERAL  
SETUP menu.  
NOTE: Choosing NTSC item indicates that the  
player will output by NTSC system, Similarly, you  
can sacquire PAL system by choosing the PAL item.  
And the item MULTI means video output is  
depending on the format of DVD or VCD discs.  
20  
DVD616K IFU for /751 3141 016 18911  
2002.3.20, 1:33 PM  
DVD 765K/751 English IFU  
20  
 
” «  
Setup Menu  
Picture Source  
Preferences setup  
For some DVD discs, DVD player may not  
recognize properly if the disc type is progressive  
or not, you’d better to select the correct disc type  
manually for best video performance.  
Press the 34 keys to highlight the PIC SOURCE  
item in theVIDEO OUTPUT SETUP menu.  
Press OK.  
There are items included in PREFERENCES menu  
as AUDIO, SUBTITLE,  
DISC MENU,PARENTAL CONTROL,  
PASSWORD, DEFAULT and SMART NAV.  
Press the STOP key twice.  
Press SYSTEM MENU to enter its menu.  
Highlight the PREFERENCES item by pressing the  
34 keys.  
1
2
1
2
3
3 Enter its submenu by pressing the 2 key.  
4 Move the cursor by pressing the 34 keys to  
highlight the selected item.  
4
Press OK to confirm your selection.  
AUTO: playback the disc automatically.  
FILM: the DVD disc is progressive  
VIDEO: the DVD disc is interlaced  
Audio language  
DVD discs are available for multiple audio  
languages. Use this item to  
choose your preferred default  
audio language.  
5
6
Press OK.  
Press the 1 key to return to theVIDEO  
OUTPUT SETUP menu.  
1
Press the 34 keys to highlight  
the AUDIO item.  
Progressive Scan  
2
3
4
Press OK to open its submenu.  
Enter its submenu by pressing the 2 key.  
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
Press OK.  
This menu indicates the video output status  
whether it is progressive scan or not.  
Press the 34 keys to highlight the PROSCAN  
item in theVIDEO OUTPUT SETUP menu.  
Press OK.  
1
2
5
6
Press the 1 key to return to the PREFERENCES  
menu.  
To select the progressive scan mode to output  
video signals for best video performance, first, be  
sure you have connected the component video  
cables between DVD player and TV set.  
Press PROGRESSIVE SCAN on the front panel  
to select progressive scan mode or not.  
NOTE:Your DVD disc may not include the audio  
language which you set in the SETUP menu. If so,  
the player will use other audio language instead.  
0
Subtitle language  
DVD discs are available for multi-subtitle language.  
This item is used to choose  
default subtitle language.  
Press the 34 keys to highlight  
the SUBTITLE item.  
Press OK to open its submenu.  
Enter its submenu by pressing the 2 key.  
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
Brightness  
1
2
Press the 34 keys to highlight BRIGHTNESS in  
theVIDEO OUT SETUP menu.  
Press OK to open its submenu.  
1
3 Press the 2 key to highlight the item of the  
submenu.  
2
3
4
4 Press the 34 keys to adjust the brightness level.  
5
6
Press OK.  
Press the 1 key to return to theVIDEO  
OUTPUT SETUP menu.  
5
6
Press OK.  
Press the 1 key to return to the PREFERENCES  
menu.  
NOTE:Your DVD disc may not include the subtitle  
which you set in the SETUP menu. If so, the player  
will use other audio language and subtitle instead.  
21  
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911  
 
DVD 765K/751 English IFU  
21  
” «  
Setup Menu  
Disc menu language  
DVD  
Parental Control  
DVD discs are available for multiple disc menu  
languages.This item is used to choose default disc  
menu language.  
Movies on DVDs may contain scenes not suitable  
for children.Therefore, discs may containParental  
Control’ information which applies to the  
complete disc or to certain scenes on the disc.  
These scenes are rated from 1 to 8, and  
1
Press the 34 keys to highlight  
the DISC MENU item.  
Press OK to open its submenu.  
Enter its submenu by pressing the 2 key.  
Move the cursor by pressing the 34 keys to  
highlight the selected tem.  
2
3
4
alternative, more suitable scenes are available on  
the disc. Ratings are country dependent.The  
‘Parental Controlfeature allows you to prevent  
discs from being played by your children or to  
have certain discs played with alternative scenes.  
0 VCD, SVCD, CD has no level defination, so  
parental control function has no effect on those  
kinds of discs as well as most of illegal DVD discs.  
0 You can follow the steps below to setup the  
parental control:  
5
6
Press OK.  
Press the 1 key to return to the PREFERENCES  
menu.  
NOTE: If your DVD disc doesn’t include disc menu  
language you have set,the player will use other  
recorded language instead.  
1
Press the 34 keys to highlight  
the PARENTAL item.  
Password  
This password is used for the parental control  
and disc lock. Enter your password when you are  
required by the DVD player.  
2
3
Press OK to open its menu.  
Move to its submenu by pressing  
the 2 key.  
1
2
Press the 34 keys to highlight the PASSWORD  
item.  
Press OK to open its submenu.  
4 Then use the 3/4keys to highlight a rating from  
1 to 8 for the disc inserted.  
5
Press OK to confirm, then press the 1 key to  
return to the PREFERENCES menu.  
3
4
Enter its submenu by  
pressing the 2 key.  
No Parental Control  
Parental Control is not activated.The Disc will be  
played in full.  
Select NO PARENTAL item.  
Press OK.  
Move the cursor by pressing the 34 keys to  
highlight the selected item.  
Enter the current 4 digit code.  
If successful, the player will prompt for a new one.  
After that, enter the new password again to  
reconfirm.  
Press the PLAY key to return to the  
PREFERENCES menu.  
The new 4 digit code will take effect.  
1
2
5
6
7
Ratings 1 to 8:  
The disc contains scenes not suitable for children.  
If you set a rating for the player, all scenes with  
the same rating or lower will be played. Higher  
rated scenes will not be played unless an  
alternative which has the same rating or lower is  
available on the disc. If no suitable alternative is  
found, playback will stop and the 4-digit code has  
to be entered.  
8
NOTE:  
1.You can change the setup of parental control  
and disc lock with a recognise password being  
entered.  
2. If you forget the password, you can enter the  
default password 3308 and replace your password  
after logging on.  
DVD 765K/751 English IFU  
22  
2002.3.20, 1:33 PM  
 
” «  
Setup Menu  
Default setup  
If some problems occur during setting DVD, the  
item DEFAULT is used to reset all items to  
factory default and all your personal setting will  
be erased.  
1
Press the 34 keys to highlight the DEFAULT  
item.  
2
3
Press OK to open its menu.  
Enter its menu by pressing the 2  
key.  
4
Press OK.  
NOTE:When this function is executed, all setups  
will be reset to factory defaults.  
Smart Navigator  
In this menu, it contains of the setting when you  
playback picture CD and MP3 CD.  
Press the 3 4key to highlight the PREFERENCE  
item.  
2
3
4
Press OK to open the PREFERENCE menu.  
Press the 3 4to highlight the SMART NAV  
menu.  
5
6
7
Press OK to open the menu.  
Press 2to enter the menu.  
Press 3 4to highlight the NO MENU orWITH  
MENU item.  
NO MENU: playback all images or MP3  
musics in sequence automatically  
WITH MENU:playback images or MP3 musics  
in the selected folder.  
8
Press the OK key to confirm your selection  
DVD 765K/751 English IFU  
23  
2002.3.20, 1:33 PM  
 
” «  
Specifications  
PLAYBACK SYSTEM  
DVDVideo  
AUDIO PERFORMANCE  
DA Converter  
24bit  
Video CD & SVCD  
CD  
Signal-Noise (1KHz)  
Dynamic range(1KHz)  
>95dB  
>80dB  
MP3-CD  
DVD  
fs 96 kHz  
4Hz- 44kHz  
PICTURE CD  
CD-R, CD-RW  
DVD+RW  
fs 48 kHz  
fs 48 kHz  
fs 44.1kHz  
fs 44.1kHz  
4Hz- 22kHz  
4Hz- 22 KHz  
4Hz- 20kHz  
4Hz- 20kHz  
SVCD  
CD/VCD  
VIDEO PERFORMANCE  
* CVBS  
1Vpp --- 75  
TV STANDARD (PAL/50Hz) (NTSC/60Hz)  
* S-VIDEO  
Y: 1.00Vpp --- 75Ω  
C: 0.30Vpp --- 75Ω  
Y: 1.00Vpp --- 75Ω  
PR: 0.7Vpp --- 75Ω  
PB: 0.7Vpp --- 75Ω  
Number of lines  
Playback  
625  
525  
Multistandard  
(PAL/NTSC)  
* Component video  
CONNECTIONS  
Component Video Output  
Cinch  
S-Video Output  
Mini DIN 4-pins  
Video Output  
Audio Output(5.1)  
Audio Output(L+R) Cinch  
Digital Output  
Cinch  
Cinch  
AUDIO FORMAT  
Digital  
Mpeg/ AC-3/ DTS  
compressed Digital  
16, 20, 24 bits  
PCM  
1 coaxial / optical  
fs, 44.1, 48, 96 kHz  
24, 32, 56, 64, 96, 128,  
256 kbps & variable  
bit rate fs, 16, 22.05,  
24, 32, 44.1, 48 kHz  
IEC958 for CDDA / LPCM/ MPEG1  
IEC1937 for MPEG 2, Dolby  
Digital and DTS  
MP3(ISO 9660)  
Analog Sound Stereo  
Full decoding of Dolby Digital and DTS multichannel surrond  
sound  
CABINET  
Dimensions (w x d x h)  
Weight  
435 x 286 x 75 mm  
Approximately 3.0 Kg  
Specifications subject to change without prior notice  
Maintenance  
Cleaning the Cabinet  
Use a soft cloth slightly moistened with a mild  
detergent solution. Do not use a solution  
containing alcohol, spirits, ammonia or abrasives.  
Cleaning Discs  
When a disc becomes dirty, clean it with a  
cleaning cloth.Wipe the disc from the center out.  
Do not wipe in a circular motion.  
Do not use solvents such as benzine, thinner,  
commercially available cleaners, or antistatic spray  
intended for analog records.  
24  
DVD616K IFU for /751 3141 016 18911  
2002.3.20, 1:33 PM  
DVD 765K/751 English IFU  
24  
 
” «  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will invalidate the  
warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair.If you are  
unable to remedy a problem by following these hints,consult your dealer or service center.  
Problem  
Solution  
No power  
No picture  
Check if the AC power cord is properly connected.  
Check if theTV is switched on.  
Check the video connection.  
Distorted picture  
The disc is badly scratched or dirty.  
Sometimes a small amount of picture distortion  
may appear .This is not a malfunction.  
Completely distorted picture or  
black/white picture with DVD  
orVideo CD  
Make sure the NTSC/PAL setting at the DVD  
player matches the video signal of your television.  
(See NTSC/PAL Conversion)  
No sound or distorted sound  
Adjust the volume.  
Check that the speakers are connected correctly.  
No audio at digital output  
Check the digital connections.  
Check the settings menu to make sure the digital  
output is set to ALL or PCM.  
Check if the audio format of the selected audio  
language matches your receiver capabilities.  
Disc can’t be played  
Ensure the disc label is facing up.  
Check if the disc is defective by trying another disc.  
No return to start-up screen when  
disc is removed  
Reset the unit by switching the player off, then on  
again.  
The player does not respond to  
the remote control  
Aim the remote control directly at the sensor on  
the front of the player.  
Reduce the distance to the player.  
Replace the batteries in the remote control.  
Insert the batteries with their polarities (+/– signs)  
as indicated.  
Buttons do not work  
In order to completely reset the player, unplug the  
AC cord from the AC outlet.  
Player does not respond to some  
operating commands during playback.  
Operations may not be permitted by the disc.  
Refer to the instructions of the disc.  
DVDVideo player cannot read  
CDs/DVDs  
Use a commonly available cleaning CD/DVD to  
clean the lens before sending the DVDVideo player  
for repair.  
25  
DVD616K IFU fo2r0/0725.31.20, 1:33 PM3141 016 18911  
 
DVD 765K/751 English IFU  
25  
” «  
Meet Philips at the Internet  
DVD765K  
CLASS 1  
LASER PRODUCT  
The products and services described herein  
are not necessarily available in all countries  
Due to continuous product improvements this  
document is subject to change without notice.  
DVD 765K/751 English IFU  
28  
2002.3.20, 1:33 PM  
 
” «  

Pelco Home Security System PP301 User Manual
Petsafe Pet Fence RFA 200 User Manual
Philips Automobile Accessories CID3287 User Manual
Philips Hair Dryer HP4940 00 User Manual
Philips TV Video Accessories TV Video Accessories User Manual
Polaroid Flat Panel Television FLM 1507 User Manual
Polk Audio Stereo System RM6880 User Manual
Polycom Server 725 78600 002A2 User Manual
Poulan Trimmer PP 176 User Manual
Proctor Silex Toaster 24450 User Manual