Philips DVD VCR Combo 0VMN03813 User Manual

E9015ED_EN.qx3 03.7.29 6:32 PM Page 1  
Digital Video Disc Player  
Video Cassette Recorder  
FM/MW RadioTuner  
MX5100VR  
R
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 3  
Contents  
General Information  
Programming a Recording (TIMER)  
Environmental Information. . . . . . . . . . . . . . . . . . . . . 2  
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Symbols Used in this Manual . . . . . . . . . . . . . . . . . . . 2  
General information . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Programming a recording  
(with the 'SHOWVIEW® system') . . . . . . . . . . . . . . . . 13  
Programming a recording  
(without the SHOWVIEW system). . . . . . . . . . . . . . . . 14  
OTR (OneTouch Recording). . . . . . . . . . . . . . . . . . . 14  
How to check, or delete  
Functional Overview  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Display Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
a programmed recording (TIMER) . . . . . . . . . . . . . . 14  
How to change  
a programmed recording (TIMER) . . . . . . . . . . . . . . 14  
Hints forTimer Recording . . . . . . . . . . . . . . . . . . . . 14  
Setting Up your System  
Other Functions  
Basic Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Connecting to aTV . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Connecting to Optional Equipment  
Switching the status display off or on . . . . . . . . . . . . 15  
Blue Background on or off . . . . . . . . . . . . . . . . . . . . 15  
Clock Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Selecting the sound channel . . . . . . . . . . . . . . . . . . . 15  
Digital Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Surround Sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
(for DVD features). . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Antenna Connections . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Connecting the speaker wires to the speaker jacks . . 7  
Setting up Surround Sound. . . . . . . . . . . . . . . . . . . . . 8  
External Input Mode (forVCR features). . . . . . . . . . . 8  
Inserting batteries into the Remote Control . . . . . . . 8  
Using the Remote Control . . . . . . . . . . . . . . . . . . . . . 8  
PlayableVideo CassetteTapes. . . . . . . . . . . . . . . . . . . 8  
Turning on your System . . . . . . . . . . . . . . . . . . . . . . . 8  
Video Channel Setting . . . . . . . . . . . . . . . . . . . . . . . . 9  
Automatic Channel Setup. . . . . . . . . . . . . . . . . . . . . . 9  
Manual Channel Preset . . . . . . . . . . . . . . . . . . . . . . . . 9  
FollowTV (AutomaticTV channels sorting). . . . . . . . 9  
Sorting and clearingTV channels manually . . . . . . . 10  
Setting the language (forVCR features) . . . . . . . . . . 10  
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Setting the RF out channel (forVCR features). . . . . 10  
Decoder allocation (forVCR features) . . . . . . . . . . . 10  
Playing a Disc  
Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
General Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Disc Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Calling Up a Menu During Playback . . . . . . . . . . . . . 16  
Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . 16  
Resume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Fast Forward / Reverse Search . . . . . . . . . . . . . . . . . 16  
Slow Forward / Slow Reverse . . . . . . . . . . . . . . . . . . 16  
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Title / Chapter Search. . . . . . . . . . . . . . . . . . . . . . . . 17  
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
MP3/JPEG Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
On-Screen Information . . . . . . . . . . . . . . . . . . . . . . . 18  
Track Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Audio Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Stereo Sound Mode. . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Subtitle Language . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Camera Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Changing the On-Screen Display . . . . . . . . . . . . . . . 19  
Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Marker Setup Screen. . . . . . . . . . . . . . . . . . . . . . . . . 19  
VCR Playback  
Playing cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Playing back NTSC cassettes . . . . . . . . . . . . . . . . . . 11  
Displaying current tape position . . . . . . . . . . . . . . . . 11  
Searching for a tape position with picture  
(scanning). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Still picture / slow motion . . . . . . . . . . . . . . . . . . . . . 11  
Searching for tape position without picture  
(forward wind and rewind) . . . . . . . . . . . . . . . . . . . . 11  
Index search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
ManualTracking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
VCR Manual Recording  
General information . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Recording without automatic switch-off. . . . . . . . . . 12  
Linking up recordings (assemble cut) . . . . . . . . . . . . 12  
Selecting the recording speed (SP or LP). . . . . . . . . 12  
Automatic controlled recording from a satellite  
receiver (RECORD LINK) . . . . . . . . . . . . . . . . . . . . 12  
'Direct Record'. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
Switching 'Direct Record' on or off. . . . . . . . . . . . . . 12  
Direct dubbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Recording (From DVDToVCR). . . . . . . . . . . . . . . . . 13  
DVD Setup  
Audio Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
DelayTime. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Speaker Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Language Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Display Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
FM/MW Radio  
Selecting Radio Station . . . . . . . . . . . . . . . . . . . . . . . 22  
Preset Radio Stations . . . . . . . . . . . . . . . . . . . . . . . . 22  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
R
SHOWVIEW is a registered trademark of Gemstar Development  
Corporation.  
The SHOWVIEW system is manufactured under licence from  
Gemstar Development Corporation.  
3
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 4  
Functional Overview  
20.  
(VCR)  
Front Panel  
Appears when a videotape is loaded.  
1
2
3
4
5
21. REPEAT (DVD)  
Stays on when the repeat function is on.  
STOP/EJECT  
22. B (DVD,VCR)  
OPEN  
CLOSE  
JAZZ  
POP  
CLASSIC  
Stays on when the inserted disc or cassette is being played  
back.  
OPTIMAL  
STANDBY-ON  
DIRECT  
SOURCE  
DVD  
VCR TUNER DUBBING  
PLAY  
STOP  
TIMER  
REC  
RECORD  
PLAY  
HEADPHONE  
VIDEO  
AUDIO  
VOL  
IR  
SURR  
23. k (DVD,VCR)  
Lights up when the inserted disc comes to a pause. (DVD)  
Lights up when the playback is in a still or in a slow mode.  
(VCR)  
18 17 161514  
1312 11 10  
9
8
7
19  
6
24. A-B (DVD)  
Stays on when the A-B repeat function is on.  
25. FM (TUNER)  
Indicates an FM station  
26. MW (TUNER)  
Indicates an MW station  
202122 2324 25 26 27 28 29 30 31 32 33 34 3536  
27.  
(TUNER)  
Indicates a stereo broadcast  
1. DiscTray (DVD)  
insert a disc here  
2. OPEN/CLOSE A button (DVD)  
28. TITLE (DVD)  
Stays on when repeat title function is on.  
to open/close the disc tray  
29. Digital Display (DVD,VCR,TUNER)  
Displays how long a current title or track has been played  
back.When a chapter or track has switched, the number of a  
new title, chapter or track is displayed. (DVD)  
Works as a clock, or a tape counter. Also displays a channel  
number, and remaining time for OTR. (VCR)  
Displays a current radio frequency (station number).  
(TUNER)  
30. CHP. (DVD)  
Stays on when repeat chapter function is on.  
31. TRK (DVD)  
Stays on when repeat track function is on.  
32. CD  
3. Cassette Compartment (VCR)  
insert a tape here  
4. STOP/EJECT C A button (VCR)  
when playback is stopped, press to eject the tape  
5. Sound lights  
Each indicator lights according to the sound effect you select  
by pressing the SOUND button on the remote  
6. VOLUME dial  
turn clockwise to increase the volume; turn counter-clock-  
wise to decrease the volume  
7. SURR light  
light appears when Surround Sound is On  
8. AUDIO andVIDEO in jacks  
connect to AUDIO andVIDEO OUT of an audio source  
9. HEADPHONE jack  
connect headphones (not supplied) here  
10. PLAY B button (VCR)  
Lights up when a CD is inserted on the tray.  
VCD  
Lights up when aVCD is inserted on the tray.  
33. MHz  
Indicates an FM station.  
KHz  
Indicates an MW station.  
to play a tape  
11. RECORD button and light (VCR)  
Press once to start recording, repeatedly to start an One  
Touch Recording  
light appears during recording, it flashes when a recording is  
paused  
12. TIMER REC light (VCR)  
34. dts  
Indicates DTS is available.  
35. DDPL  
Indicates Dolby ProLogic is available.  
36. DDD  
light appears when the System is in standby mode for a timer  
recording (also light appears during timer recording)  
Indicates Dolby Digital is available.  
13. IR (Infrared) Remote Sensor (DVD,VCR,TUNER)  
receive signals from remote control  
14. STOP C button (DVD)  
Display Message  
Appears after the disc tray closes if the tray is empty, if  
there is an error reading the disc, or if an unacceptable  
disc is installed.  
to stop playback  
15. PLAY B button (DVD)  
to start, pause or resume disc playback  
Tray is opening or is open.  
16. DIRECT DUBBING button (VCR)  
to play DVD disc and record its’ content to video cassette  
tape at the same time  
Tray is closing. This also may appear as the Player tries  
to load a Disc.  
17. SOURCE button and lights (DVD,VCR,TUNER)  
to select DVD,VCR and TUNER mode  
Disc is loading.  
DVD light appears when the System in DVD mode  
VCR light appears when the System inVCR mode  
TUNER light appears when the System in TUNER mode  
Lights up when a playback control is activated.  
18. STANDBY-ONy button and light (DVD,VCR,  
TUNER)  
to switch the player to ON or OFF  
light appears when the System turns on.  
19. DVD  
Lights up when a DVD is inserted on the tray.  
4
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 5  
Functional Overview  
1. TIMER SET  
Rear Panel  
to put the System into standby mode for a timer recording  
2
3
1
2. SYSTEM MENU  
to access or remove the DVD setup menu (DVD)  
AV2  
(DECODER)  
PROG  
FL  
FR  
C
VCR  
DVD/VCR  
MW  
to preset radio stations in Tuner mode (TUNER)  
AV1(TV)  
SL  
SR  
W
RF OUT  
AERIAL  
3. AUDIO/BAND  
TV ANTENNA  
FM  
(75)  
to choose audio languages or sound modes (DVD)  
to choose sound modes (VCR)  
DIGITAL  
AUDIO OUT  
COAXIAL  
S-VIDEO  
OUT  
SPEAKER (4)  
to choose FM or MW in Tuner mode (TUNER)  
4 5 6 7  
1. AV1 (TV) jack  
connect SCART cable to a TV  
2. AV2 (DECODER) jack (VCR only)  
8
9
10  
11  
4. REC  
I
to record the TV channel selected at this moment or press  
repeatedly to start a One Touch Recording (VCR)  
5. SKIP/P– j / SKIP/P+  
i
to skip chapter/tracks (DVD)  
to change TV channels (VCR)  
connect SCART cable from another DVD/VCR, camcoder or  
an audio/video source  
press and hold to search radio station  
or press to increase or decrease the frequency by one-tenth  
(TUNER)  
3. MW antenna jack  
connect the supplied MW antenna to the MW jack  
4. S-Video Out jack (DVD only)  
connect to a TV with S-Video inputs  
5. RF OUT jack  
use the supplied RF coaxial cable to connect to the ANTEN-  
NA IN on your TV, cable box or Direct Broadcast System  
6. AERIAL jack  
6. TITLE  
to display title menu of a disc (DVD)  
7. MODE/SYSTEM  
to set up programmed or random playback (DVD,Audio CD)  
not use (VCR)  
8. DVD  
press to put the System in DVD mode and before using the  
remote control for DVD features  
9. DISC/VCR MENU  
connect to an antenna or cable  
7. COAXIAL (Digital audio out) jack (DVD only)  
connect to AUDIO inputs of a digital (coaxial) audio equip-  
ment  
8. FM antenna jack  
connect the supplied FM antenna to the FM jack  
9. Fan  
to display the menu of the DVD disc or to accessVCR menu  
10. STOP  
C
to stop a DVD disc playback (DVD)  
to stop playback, recording (VCR)  
to erase a preset (TUNER)  
10. SPEAKER jacks  
connect the supplied speakers using the supplied speaker  
wires.  
11. MAINS (AC Power Cord)  
11. REW  
h
to view DVD picture in fast reverse motion (DVD)  
to rewind the tape (VCR)  
12. 0-9 numerical key pads/+10  
select numbered items in a menu  
connect to a standard AC outlet  
use +10 button to enter number 10 and above (DVD)  
to select TV channels / to enter the SHOWVIEW number  
(VCR)  
Remote Control  
to choose a preset radio station (TUNER)  
13. SURROUND  
34  
STANDBY-ON  
TIMER SET  
33  
1
to turn Surround Sound on or off  
SYSTEM  
MENU  
AUDIO/  
BAND  
SUBTITLE  
ANGLE  
2
3
32  
31  
14. SOUND  
to choose a Digital Sound effect  
15. VOLUME  
PROG  
REC DISPLAY/STATUS/EXIT ZOOM  
4
30  
to adjust the volume  
16. REPEAT A-B  
repeat a specific segment (DVD)  
17. REPEAT  
SKIP/  
SKIP/  
CLEAR  
5
P
-
P
+
29  
28  
TITLE  
MODE/SYSTEM  
RETURN  
6
7
8
TUNER  
DVD  
VCR  
OK  
27  
26  
25  
repeat chapter, track, title, disc (DVD)  
DISC/VCR  
18. SEARCH/INDEX  
3
MENU  
9
to access or remove search display (DVD)  
to fast forward or rewind the tape at index number (VCR)  
19. SV/V+  
24  
STOP  
PLAY  
to programme timer recording with the SHOWVIEW system  
(VCR)  
20. SLOW  
to view tape playback in slow motion (VCR)  
10  
11  
23  
22  
REW  
FF  
21  
PAUSE  
SLOW  
21. FF  
g
1
4
2
5
8
0
3
6
20  
19  
to view DVD picture in fast forward motion (DVD)  
to fast forward the tape (VCR)  
22. PAUSE  
pause playback temporarily / frame-by-frame playback (DVD)  
pause playback and recording temporarily (VCR)  
23. PLAY  
SV / V+  
k
12  
SEARCH/INDEX  
7
9
18  
17  
REPEAT  
REPEAT  
A-B  
B
+10  
16  
to start a DVD disc playback (DVD)  
to start a tape playback(VCR)  
SURROUND SOUND  
VOLUME  
15  
13  
14  
5
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 6  
Functional Overview  
Setting Up your System  
24.  
{
B
K
L
Basic Connections  
• Please refer to the instruction books of your TV,VCR, Stereo  
System or other devices as necessary to make the best con-  
nections.  
• Make one of the following connections, depending on the  
capabilities of your existing equipment.  
The following guidelines are options for the best picture and  
sound quality available on your System.  
(left/right/up/down) select an item in the menu  
B to choose a preset radio station (TUNER)  
25. OK  
acknowledge menu selection (DVD)  
26. TUNER  
press to put the System in TUNER mode and before using  
the remote control for TUNER features  
27. VCR  
{
Picture  
press to put the System inVCR mode and before using the  
remote control forVCR features  
1
2
3
4
Use SCART RGB Output (DVD/VCR(AV1 TV)) for best picture  
quality (for DVD features).  
Use S-VIDEO Output for the better picture quality (for DVD  
features only).  
Use SCART Composite Output for good picture quality (for  
DVD andVCR features).  
If your TV only has a RF-style (Antenna IN or 75 ohm) input,  
use the RF OUT for connection and set your TV to channel 22  
~ 69 with the same channel for the System is set (for DVD and  
VCR features).  
28. RETURN  
to return previous or remove setup menu (DVD)  
29. CLEAR  
to reset the setting (DVD)  
to reset the counter (VCR)  
to delete last entry/Clear programmed recording (TIMER)  
(VCR)  
30. ZOOM  
enlarge DVD video image (DVD)  
31. SUBTITLE  
subtitle language selector (DVD)  
32. ANGLE  
select DVD camera angle (DVD)  
33. STANDBY-ON  
Sound  
1
2
Digital audio connections provide the clearest sound. Connect  
the System DIGITAL AUDIO OUT (COAXIAL) to your amplifier  
or receiver (for DVD features only).  
Use SCART Output (DVD/VCR(AV1 TV)) for better sound  
quality (for DVD andVCR features).  
y
Warning!  
switch the System ON or OFF  
– Never make or change connections with the power  
switched on.  
– Connect the System directly to yourTV, instead of eg. a  
VCR, to avoid distortion because DVD video discs are  
copy protected.  
– If you use the Euro audio/video cable, it is not necessary  
to use other audio cables.  
34. DISPLAY/STATUS/EXIT  
to access or remove the display screen during DVD or Audio  
CD playback (DVD)  
to access or removeVCR’s on-screen status display/ to  
removeVCR’s menu (VCR)  
Connecting to aTV.  
1
2
3
Disconnect the antenna or cable from your TV.  
Connect the antenna or cable to the AERIAL of your System.  
Connect black RF coaxial cable to the RF OUT on the rear  
panel of the System and to the ANTENNA IN on the TV.  
Connect the AV1 (TV) jack on the System to the correspond-  
ing connector on the TV.  
4
Note:  
– Ensure that the “TV” indication on SCART cable is con-  
nected to theTV set and “DVD” indication on SCART  
cable is connected to the System.  
5
Plug in the power cords of the TV and the System.  
Antenna In  
Back of DVD/VCR/TUNER  
(on back ofTV)  
example only  
Antenna  
Indoor/Outdoor  
(300 ohm)  
AV2  
(DECODER)  
FL  
VCR  
DVD/VCR  
MW  
FR  
C
AV1(TV)  
SL  
SR  
W
RF UT  
AERIAL  
TV ANTENNA  
FM  
(75)  
DIGITAL  
AUDIO OUT  
COAXIAL  
S-VIO  
OUT  
SPEAKER (4)  
1
L/MONO  
AUDIO  
R
VIDEO  
in  
RF OUT  
AERIAL  
OR  
75  
ANT  
CABLE  
Cable  
(75 ohm)  
Black RF  
coaxial cable  
(Supplied)  
6
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 7  
Setting Up your System  
If your TV is not equipped with a SCART input, you can select  
the following connection:  
If yourTV has a S-Video input connector,  
Connect the antenna or cable to the AERIAL of your System.  
Connect the S-Video out on the System to the S-Video in on  
the TV.  
Connect the COAXIAL (Digital audio out) on the System to  
the Coaxial jack on the TV.  
Antenna Connections  
MW Antenna  
1
2
Fix the antenna holder as shown.  
1
2
3
Note:  
– You will still need the SCART cable or RF coaxial cable  
for VCR features.  
Connect the supplied MW antenna to the MW jack, then posi-  
tion it to receive the clearest sound.  
AV2  
(DECODER)  
FL  
VCR  
DVD/VCR  
MW  
FR  
C
AV1(TV)  
SL  
SR  
W
RF OUT  
AERIAL  
TV ANTENNA  
FM  
(75)  
DIGITAL  
AUDIO OUT  
COAXIAL  
S-VIDEO  
OUT  
SPEAKER (4)  
AV2  
(DECODER)  
FL  
FM Antenna  
Connect the supplied FM antenna to the FM jack. Extend the  
FM antenna wire and fix its end to the wall.  
VCR  
MW  
FR  
C
DVD/VCR  
AV1(TV)  
SL  
SR  
W
RF OUT  
AERIAL  
1
TV ANTENNA  
FM  
(75)  
DIGITAL  
UDIO OUT  
COAXIAL  
S-VIDEO  
OUT  
SPEAKER (4)  
AV2  
(DECODER)  
FL  
VCR  
DVD/VCR  
MW  
FR  
C
Connecting to Optional Equipment  
(for DVD features)  
AV1(TV)  
SL  
SR  
W
RF OUT  
AERIAL  
TV ANTENNA  
FM  
(75)  
DIGITAL  
AUDIO OUT  
COAXIAL  
S-VIDEO  
OUT  
SPEAKER (4)  
• A digital component with a built-in MPEG 2 or Dolby  
TM  
Digital decoder allows you to enjoy the surround sound  
while producing the effect of being in a movie theater or a  
concert hall.  
The player outputs the surround sound signals from the DIG-  
ITAL OUT COAXIAL connector.  
Notes:  
– Do not place the MW antenna on the System. Keep it as  
possible from the System and the speaker wires. Keep it  
away from the AC power cords of the System and other  
equipment.  
– For better FM reception, connect an outdoor FM anten-  
na (not supplied) to the ANTENNA 75 ohm jack.  
If your receiver has a MPEG 2 or Dolby Digital™ decoder,  
Connect the COAXIAL DIGITAL AUDIO OUT of the System  
to the COAXIAL DIGITAL AUDIO IN on your receiver.  
1
Notes:  
– If the audio format of the digital output does not match  
the capabilities of your receiver, the receiver will pro-  
duce a strong, distorted sound or no sound at all.  
– MP3 Audio is not available on the Digital Output.  
– You will still need the video cable or RF coaxial cable for  
VCR features.  
Connecting the speaker wires to the speak-  
er jacks  
1
Connect the supplied speakers using the sup-  
plied speaker wires. Match the colors of the  
wires to the colors on the jacks. Hold down  
the jack tab while inserting the stripped por-  
tion of the speaker wire into the jack.Then,  
release the tab. Make sure you do not insert  
the wire too far. None of the rubber-coated  
wire should be clamped by the jack tab.  
AUDIO RECEIVER  
COAXIAL DIGITAL  
AUDIO IN  
2  
(ODER)  
FL  
VCR  
DVD/VCR  
MW  
FR  
C
Front  
Front  
Speaker  
(right)  
Center Speaker  
AV1(TV)  
Speaker  
SL  
SR  
W
RF OUT  
AERIAL  
(left)  
Subwoofer  
TV ANTENNA  
FM  
(75)  
DIGITAL  
AUDIO OUT  
COAXIAL  
S-VIDEO  
OUT  
SPEAKER (4)  
Rear Speaker  
(left surround)  
Rear Speaker  
(right surround)  
FL (Front Left - white)  
FR (Front Right - red)  
C (Center - green)  
SL (Surround/Rear Left - blue)  
SR (Surround/Rear Right - grey)  
W (Subwoofer - purple)  
AV2  
(DECODER)  
FL  
FR  
C
VCR  
DVD/VCR  
MW  
AV1(TV)  
SL  
SR  
W
RF OUT  
AERIAL  
TV ANTENNA  
FM  
(75)  
DIGITAL  
AUDIO OUT  
COAXIAL  
S-VIDEO  
OUT  
SPEAKER (4)  
7
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 8  
Setting Up your System  
Setting up Surround Sound  
Using the Remote Control  
Connect all the speakers and set up the System properly in  
order to enjoy the Home Cinema experience.  
Place the FRONT Left and Right speakers at equal distances  
from the TV and at a 45-degree angle from the listening posi-  
tion.  
• Direct the remote control at the remote sensor of the  
System.  
• Do not drop the remote control.  
• Do not leave the remote control near extremely hot or  
1
humid place.  
2
3
Place the CENTER speaker above or below the TV to localize  
the sound.  
Place the REAR (Surround) speakers at normal listening ear  
level, facing each other or mounted on the wall. Use the sup-  
plied mounting brackets to mount speakers to the wall.  
Place the Subwoofer on the floor, near the TV.  
• Do not spill water or put anything wet on the remote con-  
trol.  
PlayableVideo CassetteTapes  
Philips Consume Electronics recommends that only video cas-  
sette tapes that have theVHS mark and High Quality (HQ) sys-  
tem is compatible with this System.This  
4
Center Speaker  
Subwoofer  
Front  
Speaker  
(left)  
Front  
Speaker  
(right)  
TV  
System has an Automatic Head Cleaner.  
Recording Prevention  
Video cassette tapes have record tabs to  
ensure recordings are not erased accidentally.  
To prevent recording, break off the tab with a  
screw-driver.  
1
1
2
VIEWING AREA  
To allow recording, cover the hole with cello-  
phane tape.  
Rear Speaker  
(left surround)  
Rear Speaker  
(right surround)  
2
Notes:  
– Use only tapes with VHS mark.  
– Remove any adhesive stick-on notes from the tape  
before inserting into the System.  
– Periodic maintenance is required to maintain your  
System performance.  
Notes:  
– Connect the speaker wires correctly. Improper connec-  
tions may short circuit the System.  
– For optimal sound, use the supplied speakers.  
– Do not connect more than one speaker to any pair of  
speaker jacks on the System.  
– Video heads will require replacement after a period of  
time. Only an authorised service center should perform  
this service.  
– Do not connect speakers with an impedance lower than  
6 ohms.  
– Sit in your usual listening position to set up the speaker  
balance.  
To avoid magnetic interference, do not place the FRONT  
speakers too close to yourTV.  
– Placing the REAR (Surround) speakers farther from the  
listening position than the FRONT and CENTER speak-  
ers will weaken the Surround Sound effect.  
– Secure all speakers to prevent accidents and improve  
sound quality. Use the supplied mounting brackets to  
mount speakers to a wall.  
Turning on your System  
The following steps only be performed when you insert the AC  
PLUG at the first time.  
Turn on the TV and select the  
video channel on the TV.  
Plug in the System.  
Press K/L repeatedly to select  
your desired language.  
SELECT  
K
L
1
ENGLISH  
FRANÇAIS  
2
3
ESPAÑOL  
DEUTSCH  
ITALIANO  
SVENSKA  
NEDERLANDS  
PUSH MENU TO CONTINUE  
4
5
Press DISC/VCR MENU.  
Confirm with  
G.  
SKIP/P+  
The automatic TV channel search  
starts.  
PLEASE WAIT  
6
7
'TIME' and 'DATE' will appear on  
the TV screen.  
Check 'TIME'. If required, please  
change the time with numerical key  
pads.  
Check if the displayed settings for  
'DAY', 'MONTH' and 'YEAR' are  
correct.  
When all information is correct,  
save by pressing DISPLAY/STA-  
TUS/EXIT.The preparation for use  
is now complete.  
External Input Mode (forVCR features)  
START FINISH  
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚  
To receive the signal from an external input (decoder, satellite  
receiver, video camera, anotherVCR etc.), connect to the AV2  
(DECODER) socket, and enter “002” with numerical key pads  
to appear “AV2” on the TV screen.  
If you use the AV1 (TV) socket, enter “001” with numerical key  
pads to appear “AV1” on the TV screen.  
8
9
TIME --:--  
If you use the front AUDIO/VIDEO input jacks, enter “003” with  
numerical key pads to appear “AV3” on the TV screen.  
DATE --/--/--  
SMART CLOCK [ON]  
Inserting batteries into the Remote Control  
END=EXIT  
1
2
Open the battery cover.  
Insert batteries (AA size) with the  
correct polarity as indicated by the  
+ and - symbols inside the battery  
compartment.  
Note:  
– If the System has been completed AUTOTUNING at this  
procedure, this initial menu has never shown even if  
power failure is occured or inserted AC plug again.  
3
Close the cover.  
CAUTION!  
– Remove batteries if they are exhausted or not to be used  
for a long time.  
– Do not use old and new or different types of batteries in  
combination.  
– Batteries contain chemical substances, so they should be  
disposed off properly and kept away from children.  
8
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 9  
Setting Up your System  
6
7
Press K/L to select CHANNEL, then press  
B.  
Video Channel Setting  
Video channel setting will be necessary, if your System is con-  
nected to the TV via the coaxial cable.  
Insert a pre-recorded tape into the System.The System will turn  
on and start playback automatically.If playback does not start,  
press PLAY B .  
Select and adjust your TV to channel 36.  
• If the playback picture appears on the TV screen, continue  
with step 8.  
• If channel 36 is employed for broadcasting, or interference  
lines appear on the picture, the RF converter must be set to  
a different channel between CH22 and CH69. Continue with  
step 3.  
Press DISC/VCR MENU.  
Press K/L to select INITIAL SET  
Press K/L.The System tuner will begin to search up or down  
automatically.When a channel is found, the System will stop  
searching and the picture will appear on the TV Screen.  
You can select desired channel number by using numerical  
key pads.You must refer to the channel plan and press three  
digits to select the channel number. (To select channel 24,  
first press “0” button then press “2” and “4”).  
• If this is the channel you want, press B.  
• If you want to remove scrambled signals, press K/L to select  
DECODER.Then, press B to select [ON].  
1
2
8
Press DISPLAY/STATUS/EXIT to exit.  
Notes:  
To confirm that a channel has been added, press the  
3
4
G /  
H buttons.  
SKIP/P-  
SKIP/P+  
– You should select the satellite channels to be received by  
the satellite receiver directly on the receiver itself.  
SELECT  
K
L
CHOOSE  
B
UP.Then, press B.  
Press K/L to select RF OUT.Then,  
press B twice.  
RF OUT CH 36  
5
6
Press K/L to select a channel  
which is not used for broadcasted  
between channel 22 and channel 69  
in your area, then press B.  
FollowTV (AutomaticTV channels sorting)  
When the automatic channel search function is activated, the  
TV channels are saved in a specific order.This may vary from  
the order of TV channels on the TV.  
This function changes the order of TV channels saved in the  
System to match that of the TV.  
Make sure that the System and the TV are connected by a  
scart cable.  
SET=0-9  
END=EXIT  
You can also see the selecting RF channel in the display.  
Press DISPLAY/STATUS/EXIT to exit.  
7
8
Set the TV channel to the RF OUT CHANNEL which was  
selected on the System.A picture from theVCR will appear on  
the TV screen. If a picture does not appear, repeat steps 3 to 7  
using a different channel which is not used for broadcasting.  
Press STOP C to stop the tape.  
1
2
3
4
PressVCR, then DISC/VCR MENU.  
SELECT  
K
L
CHOOSE  
B
AUTO TUNING  
MANUAL TUNING  
FOLLOW TV  
MOVE  
Press K/L to select TUNER SET  
UP, then press B.  
Press K/L to select 'FOLLOW TV'  
, then press B.  
'P:01' will appear in the System dis-  
play.  
Note:  
– You may also access the RF OUT CH menu by pressing  
and holding DISC/VCR MENU for 3 seconds during  
power off until the RF OUT CH menu appears.  
END=EXIT  
I cannot switch myTV set to programme number '1'  
* If you have connected additional devices to socket  
Automatic Channel Setup  
AV2(DECODER), please disconnect these devices. Because of  
other connected devices, the TV set could switch to the pro-  
gramme number of the scart socket.  
You can programme the tuner to scan only the channels that  
you can receive in your area.  
Turn on the TV and select the video out channel on your TV.  
PressVCR, then DISC/VCR MENU.  
Press K/L to select TUNER SET UP, then press B.  
Press K/L to select AUTO TUN-  
1
2
3
4
'NOTV SIGNAL' will appear in theTV screen.The  
System is not receiving a video signal from theTV.  
Check the plug on the scart cable.  
Check your TV's operating instructions to see which scart socket  
is used for video signals.  
If this does not help, it's not possible to use this function. Please  
read the section 'Sorting and Clearing TV channels manually'.  
ING, then press B.  
The tuner scans and memorizes  
PLEASE WAIT  
all the active channels in your  
START  
❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚ ❚  
FINISH  
area.After scanning, the tuner  
stops on the lowest memorized  
channel.  
5
Select programme number '1' on the TV.  
6
Confirm with B on the System remote control.The System  
compares the TV channels on the TV and the System.  
If the System finds the same TV channel as on the TV, then it  
stores it at 'P01'.  
5
Press  
G /  
H or  
SKIP/P-  
SKIP/P+  
numerical key pads to scan through channels you have  
received.  
7
8
9
Wait until the next number, e.g. 'P:02' appears in the display.  
Select the next programme number on the TV, e.g. '2'.  
Confirm with B.  
Manual Channel Preset  
PressVCR, then DISC/VCR MENU.  
Press K/L to select TUNER SET UP, then press B.  
Press K/L to select MANUAL  
TUNING, then press B.  
Press K/L to select PROG., then  
press B.  
Press K/L or numerical key pads  
1
2
3
10 Repeat steps 7 to 9 until you have assigned a programme num-  
ber to all TV channels.  
MANUAL TUNING  
11 To end, press DISPLAY/STATUS/EXIT.  
PROG.  
CHANNEL  
DECODER  
SKIP  
P55  
4
5
055  
[OFF]  
[OFF]  
to select your desired programme SET=K  
L
OR 0 – 9  
END=EXIT  
number, then press B.  
You can select programme num-  
ber 01-99.  
9
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 10  
Setting Up your System  
Sorting and clearingTV channels manually  
Setting the RF out channel (forVCR fea-  
tures)  
After you have performed the automatic channel search you  
may not agree with the sequence in which the individual TV  
channels have been allocated to the programme positions (pro-  
gramme numbers) of the System.You can use this function to  
individually sort the TV channels already saved or to delete  
unwanted TV channels or those with poor reception.  
In some reception locations it is possible that a TV channel will  
be sent on the same or similar frequency as the System.  
Result:As soon as the System is switched on, the reception  
quality for this or several other TV channels will decrease.  
The following steps will show you how to change the pre-set  
'transmission' (RF out channel) frequency on the System.  
PressVCR, then DISC/VCR MENU.  
The clock resets automatically  
1
2
If you save a TV channel that transmits TXT/PDC on programme  
number ‘P01’, date and time will constantly be updated.As a result,  
time changes, i.e. daylight savings time, will be set automatically.  
Press K/L to select 'INITIAL SET UP' , then press B.  
What is RF out channel?  
This electronic component in the System allows the device to  
transmit audio and video signals via the aerial cable.These signals  
can be received on a TV set just like TV channels.  
What is RF out channel frequency?  
1
2
3
4
PressVCR, then DISC/VCR MENU.  
MOVE  
P01: 02  
P02: 03  
P03: 05  
P04: 10  
P05: 74  
P06: 90  
P07: 99  
P08: 121  
P09: 124  
P10: 130  
Press K/L to select 'TUNER SET  
UP' , then press B.  
Press K/L to select 'MOVE' , then  
press B.  
Press K/L to select the saved TV  
channel that you want to change.  
Confirm with B.  
Move the selected channel with K/L to the programme num-  
ber you want to assign.  
This frequency or channel indicates the channel on which the  
audio or video signal is transmitted.  
3
4
5
Press K/L to select 'RF OUT' , then press B.  
Press B.  
Press K/L or numerical key pads to select a free (not allocat-  
ed) channel between channel 22 and 69 in your area.  
SELECT  
END=EXIT  
K
L
CHOOSE  
B
5
6
6
7
Press B.  
To end, press  
DISPLAY/STATUS/EXIT.  
SELECT  
K
L
CHOOSE  
B
7
8
Confirm with B.  
To assign other TV channels to a programme number, repeat  
steps 4 to 7.  
RF OUT CH  
36  
9
Confirm the assignment of the TV channel with MOVE menu.  
10 To exit the MOVE menu, press DISPLAY/STATUS/EXIT.  
END=EXIT  
Setting the language (forVCR features)  
You have the option of setting one of the displayed languages  
for the on-screen menu (OSD). However, the System display  
will only display English text regardless of this setting.  
If you cannot get an interference-free picture and sound, switch  
the built-in modulator off.  
Press L repeatedly until "--" appears next to "RF OUT CH" on  
the TV screen.  
1
2
PressVCR, then DISC/VCR MENU.  
Press K/L to select 'INITIAL SET  
UP' , then press B.  
Press K/L to select 'LANGUAGE',  
then press B.  
Select the desired language with  
K/L.  
To end, press  
Then confirm with B. In that case, please connect yourVCR to  
your TV with a Scart cable.  
SELECT  
K
L
ENGLISH  
FRANÇAIS  
ESPAÑOL  
DEUTSCH  
ITALIANO  
SVENSKA  
3
4
5
Decoder allocation (forVCR features)  
Some TV channels transmit encoded TV signals which can only  
be viewed with a purchased or rented decoder.You can con-  
nect such a decoder to this System.The following function will  
automatically activate the connected decoder for the desired  
TV channel.  
NEDERLANDS  
END=EXIT  
DISPLAY/STATUS/EXIT.  
1
Switch the TV on. If applicable, select the programme number  
for the System operation.  
Press K/L or numerical key pads to select the TV channel  
which you would like to allocate the decoder to.  
Press DISC/VCR MENU.The main menu will appear.  
Press K/L to select 'TUNER SET UP'.Then press B.  
Setting the clock  
If the display shows an incorrect time or ' --:-- ', the time and  
date must be reset manually.  
If a TV channel that transmits TXT/PDC (teletext/PDC) is  
stored under programme number 'P01', time/date will automat-  
ically be taken from the TXT/PDC information. (SMART  
CLOCK)  
2
3
4
MANUAL TUNING  
5
Press K/L to select 'MANUAL  
1
2
3
4
PressVCR, then DISC/VCR MENU.  
TUNING'.Then press B.  
PROG.  
CHANNEL  
DECODER  
SKIP  
P55  
Press K/L to select 'INITIAL SET UP' , then press B.  
Press K/L to select 'CLOCK' , then press B.  
Check the time in 'TIME'. If  
required, please change the time  
with numerical key pads.  
Check 'DAY', 'MONTH' and 'YEAR'  
in the same way.  
6
7
Press K/L to select 'DECODER'.  
Press B to select 'ON' (Decoder  
switched on).  
055  
[OFF]  
[OFF]  
TIME --:--  
SELECT  
K
L
CHOOSE  
B
END=EXIT  
DATE --/--/--  
5
6
7
SMART CLOCK [ON]  
How can I switch off the decoder?  
Use B to select 'OFF' (Decoder switched off).  
Choose ‘SMART CLOCK’ ON or  
OFF with B.  
To end, press  
END=EXIT  
8
To end, press DISPLAY/STATUS/EXIT.  
The decoder has now been allocated to this TV channel.  
DISPLAY/STATUS/EXIT.  
10  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 11  
VCR Playback  
Playing cassettes  
You can use this System to play back recordedVHS videocas-  
settes.You can operate the System using the remote control or  
the buttons on the front of the System.  
If you press PLAY, STOP, FF or REW while the set is in Stand-  
by, the power will be automatically turned on.Additionally, if a  
cassette was already inserted, the corresponding operation will  
be performed.  
Your System can only record and play standardVHS cassettes.  
Put a cassette into the cassette slot.The cassette is inserted  
automatically.  
Press PLAY B to view the tape.  
To stop the playback, press STOP C or STOP/EJECT C A on  
the System.  
Searching for a tape position with picture  
(scanning)  
1
2
While a cassette is playing, press REW  
(forward) one or more times.  
(rewind) or FF  
h
g
Press PLAY B to resume playback.  
Still picture / slow motion  
1
During playback, press PAUSE  
still picture.  
to stop the tape and display a  
k
1
2
3
During playback, press SLOW to play the tape in slow motion.  
Press PLAY B to resume playback.  
Scanning and still/slow motion interferes with the picture quali-  
ty.The sound is switched off.This is not a fault in your System.  
2
3
4
To eject the cassette, press STOP/EJECT C A on the System  
when the System stops the playback.  
Searching for tape position without picture  
(forward wind and rewind)  
1
2
3
Stop the tape with STOP  
.
C
DIGITAL STUDIO PICTURE CONTROL  
Philips has developed a system which produces the best possible  
playback quality. For old and often-used video cassettes, this sys-  
tem reduces interference. For new or high quality cassettes, it  
emphasises the details.  
Press REW  
(rewind) or FF  
(forward).  
h
g
To stop the tape, press STOP C.  
Picture/ sound quality is poor  
Index search  
Every time a tape is recorded an index marking is written on  
the tape.  
These marked positions can be found again quickly and easily  
later.  
When playing rental videos or older, poorer quality cassettes, it  
may not be possible to completely filter out picture and sound  
interference.This is not a fault in your machine. Read the section  
'Manual Tracking'.  
Do I need to change the playback speed when playing  
back LP recordings?  
During playback, the correct speed will automatically be selected.  
For more information, please read the section 'Selecting the  
recording speed (SP or LP)' in the chapter 'VCR Manual  
Recording'.  
1
2
3
To search for the previous marking, press SEARCH/INDEX  
and then REW  
3
.
h
For the next marking, press SEARCH/INDEX 3 and then  
FF  
.
g
As soon as the System finds this marking, it automatically  
switches to playback.  
Playing back NTSC cassettes  
ManualTracking  
This System can also play back cassettes that have been  
recorded in SP [Standard Play] or SLP [Super Long Play] mode  
in the NTSC standard (for example,American cassettes).  
However, this only works on PAL-television sets that are suit-  
able for a picture frequency of 60Hz.  
To manually adjust the tracking during playback and slow  
motion playback, press SKIP/P+G or SKIP/P-H.  
Tracking will return to Automatic Tracking Adjustment when  
you press STOP C, insert a tape, or press PLAY B.  
To remove vertical jitter in a Still picture, press SKIP/P+G or  
SKIP/P-H.  
Displaying current tape position  
The following information is displayed on the screen: e.g.:  
0:02:45 shows the counter in hours, minutes and seconds.  
SP/LP: will show the recorded speed of your cassette  
'REM 0:06': will show the actual amount of playing/recording  
time left on the tape in hours and minutes.  
When you play an NTSC cassette, the System will show  
'REM -:--'.  
How can I set the counter to '0:00:00'?  
You can set the counter to '0:00:00' with CLEAR.  
When you put a cassette in the System, the counter will automat-  
ically reset to '0:00:00'.  
The counter does not move  
This occurs when there are no recordings on a portion of a tape.  
This is not a fault in your System.  
The screen shows '-0:01:20'  
If you rewind a cassette from the tape position '0:00:00', the  
counter will show for instance, '-0:01:20' (the cassette was  
rewound to 1 minute and 20 seconds before '0:00:00').  
'-:--' is displayed in the 'REM' counter  
This counter will automatically recognise the length of the tape. In  
addition, when you put in a cassette the System must first calcu-  
late the time played.Therefore, '-:--' appears first and only after  
the tape has been running for a few seconds, the correct playing  
time will be shown.  
11  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 12  
VCR Manual Recording  
General information  
Automatic controlled recording from a  
satellite receiver (RECORD LINK)  
This function automatically starts recording on the switched-off  
System when a video signal is recognised through the connect-  
ed scart cable. If your satellite receiver has a programming  
function, the recording will start automatically (as long as the  
satellite receiver is switched on).  
Use a scart cable to connect scart socket AV2(DECODER) on  
the System to the corresponding scart socket on the satellite  
receiver.  
Switch on the TV. If required, select the programme number for  
the System.  
Use 'Manual Recording' to make a spontaneous recording  
(for example, a programme currently being shown).  
If you want to start and stop a recording manually, read the  
section 'Recording without automatic switch-off'.  
Read the section 'Direct Record' if you want to record a  
programme currently being shown.  
Read the section 'Automatic controlled recording from a  
satellite receiver (RECORD LINK)', if you want a record-  
ing to be controlled automatically by a satellite receiver.  
1
2
Recording without automatic switch-off  
3
4
5
6
7
Press DISC/VCR MENU.The main menu will appear.  
Select 'RECORD SET UP' with K/L and confirm with B.  
1
2
Insert a cassette.  
Use G /  
H to select the programme num-  
SKIP/P+  
SKIP/P-  
Select 'RECORD LINK' with K/L.  
Select function 'ON' with B.  
To end, press  
SELECT  
K
L
CHOOSE  
B
ber you want to record, for example, 'P01'.  
To start recording, press REC I.  
Stop recording with STOP C.  
RECORD SPEED [SP]  
DIRECT RECORD [OFF]  
RECORD LINK  
3
4
[OFF]  
DISPLAY/STATUS/EXIT.  
8
9
Insert a cassette.  
Programme the satellite receiver  
with the required information (pro-  
gramme number of the TV channel,  
start time, end time).  
Linking up recordings (assemble cut)  
END=EXIT  
When you add a further recording to a cassette, which already  
has a recording on it, a short blank (flicker) can appear between  
the old and the new recording or the picture itself can flicker.  
To help reduce these from occurring, proceed as follows:  
Find the tape position of the old recording where you want to  
insert the new recording.  
If necessary, please see the operating instructions for your  
satellite receiver.  
10 Press TIMER SET.  
1
The System is now ready to record.The beginning and end of  
the recording is controlled via scart socket AV2(DECODER).  
2
3
Look at the last minute of the old recording (playback).  
Press PAUSE  
at the tape position where the new recording  
k
is to go and press REC I.  
Now start recording as usual by pressing REC I on the  
remote control.  
'Direct Record'  
4
5
With Direct Record, you can record the right TV channel in  
seconds even if your System is switched off. If the recording is  
started manually, the System uses the current TV channel set  
on the TV.You will find more information on how to switch  
'Direct Record' on or off in the next section. Make sure that  
your System socket AV1(TV) and the TV are connected by a  
scart cable.  
On the TV, select the programme number you want make the  
recording from.  
Press REC I with the System switched off.  
Stop recording with STOP C.  
Stop recording with STOP C.  
Selecting the recording speed (SP or LP)  
LP allows to double the recording duration on tape (for exam-  
ple six hours instead of three hours on an E180 cassette).  
Switch on the TV set. If required, select the programme num-  
ber for the System.  
Press DISC/VCR MENU.The main  
menu will appear.  
Select 'RECORD SETUP' using  
K/L and confirm with B.  
Select 'RECORD SPEED' using K/L.  
Select the required recording  
speed with B.  
1
1
2
3
SELECT  
K
L
CHOOSE  
B
2
3
RECORD SPEED [SP]  
DIRECT RECORD [OFF]  
RECORD LINK  
[OFF]  
How does Direct Record work?  
The System compares the TV channel selected on the TV set with  
its stored TV channels via the scart cable. If the same TV channel  
is found, it switches the System to the corresponding programme  
number and starts recording. Please do not change the TV chan-  
nel on the TV set during the search so as not to affect the  
process.  
4
5
END=EXIT  
'SP'/'LP' /'AUTO'  
'SP': StandardPlay (normal recording speed) offers the usual first-  
class picture quality.  
'LP': LongPlay (half recording speed, double recording time). 6  
hours can be recorded on a 3-hour cassette (E180) with a some-  
what reduced picture quality.  
'AUTO':AUTOmatic Long Play. If there is not enough space on  
the tape to record a programmed recording in standard speed,  
the recording is automatically done in 'LP'  
(Longplay). Otherwise, the recording speed will be 'SP'  
(Standardplay).  
Switching 'Direct Record' on or off  
Switch on the TV. If required, select the programme number for  
the System.  
1
2
3
Press DISC/VCR MENU.The main menu will appear.  
Select 'RECORD SET UP' with  
K/L and confirm with B.  
In 'DIRECT RECORD', select 'OFF'  
(Direct Record off) or 'ON'  
(Direct Record on) with B.  
To end, press  
SELECT  
K
L
CHOOSE  
B
RECORD SPEED [SP]  
4
DIRECT RECORD [OFF]  
6
To end, press DISPLAY/STATUS/EXIT.  
RECORD LINK  
[OFF]  
5
6
DISPLAY/STATUS/EXIT.  
Press STANDBY-ONy.  
END=EXIT  
12  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 13  
VCR Manual Recording  
Programming a Recording (TIMER)  
Direct dubbing  
General information  
Follow the steps below to copy a DVD or video disc to a  
videotape.This will be possible only if the DVD is not copy  
protected.  
Put a videotape in the cassette compartment. Make sure the  
tape’s record tab is intact and the tape is long enough to  
record the disc.  
Use a TIMER programming to automatically start and stop a recording  
at a later time or date.The System will switch to the right programme  
number and begin recording at the correct time.With this System, you  
can pre-programme up to eight recordings within a period of one  
year.To make a programmed recording, your System needs to know:  
* the date you want to make the recording  
1
2
3
PressVCR.  
Select the recording speed.  
* the programme number of the TV channel  
* the start and stop time of the recording  
*VPS or PDC on or off  
This information is saved in a TIMER block.  
Details are at “Selecting the recording speed (SP or LP)”.  
Put the DVD you want to copy in the disc tray.  
Press DVD.  
Press PLAY B.While disc is playing, press PAUSE k at the  
point you wish to start recording.  
Press DIRECT DUBBING to record.  
To pause the recording.  
Press PAUSE k.  
To resume recording.  
Press PAUSE k again.  
To stop the recording.  
4
5
6
What is 'VPS/PDC'?  
'VPS' (Video Programming System)/ 'PDC' (Programme Delivery  
Control) are used to control the start and duration of TV channel  
recordings. If a TV programme starts earlier or ends later than sched-  
uled, the System will turn on and off at the correct time.  
What do I need to know about 'VPS/PDC'?  
7
Usually theVPS or PDC time is the same as the start time. But if  
your TV guide shows aVPS or PDC time which is different from  
the programme’s scheduled start time, e.g. 20.10 (VPS/PDC  
20.14), you must enter theVPS/PDC time exact to the minute. If  
you want a start time different from theVPS/PDC time, you must  
switchVPS/PDC off.  
Press STOP C.  
Recording(From DVDToVCR)  
1
2
Insert a DVD without copyright protection in the tray.  
Insert a video cassette tape with its erase prevention tab in  
place.  
Programming a recording  
(with the 'SHOWVIEW® system')  
3
4
Select the recording speed.  
R
Details are at “Selecting the recording speed (SP or LP)”.  
Enter “004” with numerical key pads to appear “DISC” on the  
TV screen.  
You no longer need to tediously enter the date, programme  
number, start and end time.All the information needed for pro-  
gramming is contained in the SHOWVIEW-programming number.  
You can find this SHOWVIEW number in most TV listing maga-  
zines written next to the concerned programme.  
5
6
7
8
Press REC I.  
Change to DVD operation mode.  
Press DVD, then PLAY B to begin the playback of a DVD.  
PressVCR, then STOP C to stop recording.  
1
2
Press SV/V+.  
ShowView system  
Enter the entire SHOWVIEW num-  
ber.This number is up to 9 digits  
long and can be found next to the  
start time of the TV programme in  
your TV listing magazine. [e.g: 1-  
234-5 or 1 234 5]  
If you make a mistake, you can  
clear your input with CLEAR.  
Press SV/V+.  
ShowView No.  
12345 – – – –  
SET=SV/V+  
CORRECT=CLEAR  
END=EXIT  
ShowView system  
3
4
ONCE  
DAILY  
WEEKLY  
Select ONCE, DAILY or WEEKLY  
recording with K/L.Then press B.  
SELECT  
K
L
CHOOSE  
B
END=EXIT  
Selecting once/daily/weekly recordings  
Using K/L, select from the following options:  
'ONCE': Recording once  
'DAILY': Repeated daily recordings (Monday to Friday)  
'WEEKLY': Repeated weekly recordings (every week on the same  
day)  
'- -' appears at PROG. .  
* The programme number of the TV channel has not yet been  
assigned to the SHOWVIEW number. Using the numerical key  
pads, select the corresponding programme number (name) of  
the TV channel.  
The following message appears on the screen:'ERROR'  
* The entered SHOWVIEW number is incorrect. Correct your input  
or end with DISPLAY/STATUS/EXIT.  
* Check the time/date (see chapter 'Installing your video', section  
'Setting the time and date').  
* A daily recording was entered for the wrong day. Daily pro-  
gramming can only be used for recordings to be made from  
Monday to Friday.  
The following message appears on the screen:'TIMER  
NOT COMPLETED'  
* The channel is wrong.  
13  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 14  
Programming a Recording (TIMER)  
5
The decoded data appears after confirmation.You can go back  
to change the data. Select the corresponding input field using  
B or CLEAR. Change the data with numerical key pads.  
When all inputs are correct, press DISPLAY/STATUS/EXIT.The  
programming information is stored in a Timer block.  
How to check, or delete a programmed  
recording (TIMER)  
1
2
PressVCR, then DISC/VCR MENU.  
6
SELECT  
K
L
CHOOSE  
B
Press K/L to select 'TIMER'.Then  
press B.  
Press K/L to select 'TIMER LIST' ,  
then press B.  
ONCE  
DAILY  
WEEKLY  
Switching on 'VPS/PDC' in the 'START' input field  
Select 'VPS/PDC' using B or CLEAR. Press '1' to switch off  
'VPS/PDC' or press '2' to switch on 'VPS/PDC'.  
3
TIMER LIST  
4
5
Select timer block with B.  
To cancel the recording, press  
CLEAR.  
7
8
Insert a cassette with an intact security tab (unprotected).  
Press TIMER SET.  
END=EXIT  
6
7
To end, press DISPLAY/STATUS/EXIT.  
Press TIMER SET.  
'TIMER REC' will light up on the System.  
Programming a recording  
(without the SHOWVIEW system)  
PressVCR, then DISC/VCR MENU.  
How to change a programmed recording  
(TIMER)  
1
2
3
1
2
3
PressVCR, then DISC/VCR MENU.  
Press K/L to select 'TIMER' ,then press B.  
Press K/L to select ONCE, DAILY,  
SELECT  
K
L
CHOOSE  
B
Select 'TIMER' with K/L.Then  
press B.  
Select ONCE, DAILY or WEEKLY  
recording with K/L.Then press B.  
If all Timer blocks are in use,FULL’  
will appear on the OSD.  
ONCE  
DAILY  
WEEKLY  
TIMER LIST  
ONCE  
or WEEKLY recording with K/L ,  
TIMER - 1 2 3 4 5 6 7 8 -  
then press B.  
4
5
Select a TIMER block with numeri-  
cal key pads. (The flashing number  
indicates an empty TIMER block.)  
END=EXIT  
4
Select the desired Timer block with  
numerical key pads. (The flashing  
Press CLEAR to delete information  
SELECT TIMER NUMBER  
and input correct information with END=EXIT  
numerical key pads.  
number indicates an empty TIMER block.)  
6
7
To end, press DISPLAY/STATUS/EXIT.  
Press TIMER SET.  
Selecting once/daily/weekly recordings  
Using K/L, select from the following options:  
'ONCE': Recording once  
'DAILY': Repeated daily recordings (Monday to Friday)  
Hints forTimer Recording  
• If there is a power failure or the System is unplugged for  
more than 1 minute, the clock setting and all timer settings  
will be lost.  
'WEEKLY': Repeated weekly recordings (every week on the same  
day)  
5
Enter the Start time (START) End time (STOP), Programme  
number (PROG.),VPS/PDC information and the Date with  
numerical key pads.  
• If a tape ends during TIMER RECORDING, the System will  
stop, eject the tape, and switch to the DVD mode automati-  
cally as the TIMER REC light blinks. (If the DVD power is off,  
the System will become the STANDBY status).  
• If a tape is not in the System or does not have a record tab,  
the TIMER REC light flashes and timer recording will not  
operate. Please insert a recordable tape.  
• When timer recordings are set, the TIMER REC light will  
come on.To use the System as usual until the time for the  
recording, press TIMER SET so that the TIMER REC light dis-  
appears. Press the System to chooseVCR, DVD or TUNER  
modes, then continue with the other features as described in  
this manual.  
Programme numbers of the ' AV1 ' , ' AV2 ' and ' AV3'  
scart socket  
You can also programme recordings from external sources via  
scart socket AV1(TV),AV2 (DECODER) or AV3(FRONT).  
6
When all inputs are correct, press DISPLAY/STATUS/EXIT.The  
programming information is stored in a TIMER block.  
Insert a cassette with an intact security tab (unprotected).  
Press TIMER SET.  
7
8
'PRESS TIMER SET BUTTON FOR TIMER RECORDING' appears on  
the screen  
* Press TIMER SET on several minutes before the start of a pro-  
grammed recording.  
OTR (OneTouch Recording)  
This function enables you to set a recording length simply by  
pressing RECORD on the System.  
Follow steps 1 to 2 in “Recording without automatic switch-  
off” section.  
Press RECORD on the System repeatedly until the desired  
recording length appears.  
Error message: 'FULL'  
• If this error message appears after you select 'ONCE', 'DAILY', or 'WEEK-  
LY' on TIMER menu and press B, then all TIMER blocks are already pro-  
grammed. No more recordings can be programmed. If you want to clear or  
check a programmed recording (TIMER block),select the programme num-  
ber on TIMER LIST menu and press CLEAR.  
1
2
0:00  
0:30  
1:00...  
7:30  
8:00  
REC (Normal recording)  
• Recording stops when 0:00 is reached.  
To check time remaining during an OTR  
Press DISPLAY/STATUS/EXIT.  
To change the recording length during an OTR  
Press RECORD until the desired length appears.  
To stop an OTR before recording is finished  
Press STOP C .  
To cancel the OTR but continue recording  
Press RECORD repeatedly until “REC” appears in the upper  
left corner of the TV screen.  
14  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 15  
Other Functions  
• During playback of the recorded tape in Hi-Fi mode:  
Switching the status display off or on  
Display on  
the TV screen  
Mode  
Stereo  
L
AUDIO OUTPUT  
Along with the on screen menu, the status display also displays  
information on the current operating status (counter, playback,  
recording,TV channel, etc.) on the TV screen.You can switch  
off the information about the operating status so that the sta-  
tus display is not recorded when copying videocassettes.  
L
Hi Fi L Audio  
Hi Fi R Audio  
Hi Fi L Audio  
Hi Fi L Audio  
Hi Fi R Audio  
Hi Fi R Audio  
Normal Audio  
Normal Audio  
STEREO  
R
L
LEFT  
RIGHT  
MONO  
R
L
R
L
1
2
PressVCR, then DISC/VCR MENU.  
Press K/L to select 'VCR SET UP'  
, then press B.  
Press K/L to select 'STATUS DIS-  
PLAY' , then press B.  
R
SELECT  
K
L
CHOOSE  
B
STATUS DISPLAY [ON]  
Monaural  
BLUE BACKGROUND [ON]  
R
3
4
5
CLOCK DISPLAY  
[ON]  
Hi Fi L Audio  
L
+
Normal Audio  
Press K/L to select 'ON' or 'OFF'  
, then press B.  
To end, press  
MIX  
MIXED  
Hi Fi R Audio  
R
+
Normal Audio  
END=EXIT  
DISPLAY/STATUS/EXIT.  
Digital Sound  
Which settings can I choose?  
'ON': Shows the status display for a few seconds only.  
'OFF': Switches off the status display.  
Digital Sound lets you enjoy special sound effects that have  
preset equalizer settings, providing the best music reproduc-  
tion.The default setting of the System is OPTIMAL.  
Press SOUND repeatedly to select OPTIMAL, CLASSIC, POP,  
or JAZZ.  
The selected Digital Sound light will appear on the front of the  
System.  
Blue Background on or off  
1
If you want the TV screen to be solid blue when a weak signal  
is received, set BLUE BACKGROUND to ‘ON’.The screen will  
be blue and the sound will be muted. Or, if you want to receive  
the weak signal, set BLUE BACKGROUND to ‘OFF’.  
PressVCR, then DISC/VCR MENU.  
1
2
Press K/L to select 'VCR SET UP'  
Surround Sound  
SELECT  
K
L
CHOOSE  
B
, then press B.  
For proper Surround Sound, connect the speakers and  
Subwoofer correctly.The Center and Rear (Surround) speakers  
only operate when Surround is On.The Discs or TV programs  
must be recorded or broadcast in Surround Sound.  
Press SURROUND to set Surround to On or Off.  
When Surround is On, the SURR (Surround) light will appear  
on the front of the System.When Surround is Off, the SURR  
(Surround) light will be off.  
STATUS DISPLAY [ON]  
BLUE BACKGROUND [ON]  
CLOCK DISPLAY  
3
4
Press K/L to select 'BLUE BACK-  
GROUND' , then press B.  
Select 'OFF' (no blue background)  
or 'ON' (blue background on) with  
B.  
[ON]  
1
END=EXIT  
5
To end, press  
DISPLAY/STATUS/EXIT.  
Programs broadcast in Stereo will produce some surround  
sound effects when played in a surround mode. However, non-  
Stereo programs will not have any sound at the Rear  
(Surround) speakers.  
Clock Display  
This function allows you to switch the System display off. It is  
useful in case you feel disturbed by the display-brightness while  
watching TV in a dark room. It also reduces the power con-  
sumption.  
PressVCR, then DISC/VCR MENU.  
Press K/L to select 'VCR SET UP'  
, then press B.  
Press K/L to select 'CLOCK DIS-  
PLAY' , then press B.  
Select 'OFF' (no clock display) or  
'ON' (clock display on) with B.  
To end, press  
The following Surround Sound modes may be broadcast by  
DVDs or TV stations.You cannot alter these Surround Sound  
options at the System.  
Matrix: Delivers sound through 5.1 Channels.You will have  
sound at all five speakers (Front Left and Right, Center, and  
Rear (Surround) Left and Right).  
Dolby Digital: Dolby Digital is a high-quality audio compres-  
sion technology first used in movies.This technology has since  
been adopted for use in Consumer Electronic products and  
allows you to enjoy the same type of sound in your home.Your  
player has a built-in Dolby Digital decoder so you can enjoy  
DVDs that include a Dolby Digital soundtrack.  
1
2
SELECT  
K
L
CHOOSE  
B
STATUS DISPLAY [ON]  
BLUE BACKGROUND [ON]  
CLOCK DISPLAY  
[ON]  
3
4
5
END=EXIT  
DISPLAY/STATUS/EXIT.  
Selecting the sound channel  
You can select the  
You can identify DVDs and equipment that contain Dolby  
Digital by looking for the following logo:  
During reception of bilingual broadcasts:  
Dolby Pro Logic: A two-channnel analog format that proivides  
sound through four speakers (Front Left and Right, Center, and a  
single Rear (Surround)) when using a Dolby ProLogic Decoder. It  
is compatible with a Stereo, but you will only have two-channel  
sound (left and right) at the Stereo.  
DTS (DigitalTheater System): Developed by Digital  
Theater Systems, Inc., of the United States. Sound is com-  
pressed to reduce its recording size. Since the compression  
level is less than Dolby Digital, the quantity of data is greater  
when decoded, providing clarity and depth in the sound.The  
sound has a wider dynamic range and higher resolution.  
desired sound channel  
during playback or while  
receiving TV channels  
via the System.This  
allows you to select a  
desired language for  
multi-language transmis-  
sions.  
Press AUDIO/BAND.  
This will show the cur-  
rent sound setting.  
Press AUDIO/BAND  
until the desired setting  
appears in the display.  
Display on  
the TV screen  
Mode  
MAIN  
SUB  
AUDIO OUTPUT  
L
Main Audio  
Main Audio  
Sub Audio  
Sub Audio  
Main Audio  
Sub Audio  
MAIN  
R
L
SUB  
R
L
R
MAIN  
SUB  
MAIN  
SUB  
1
2
Reception of stereo broadcasts:  
Display on  
the TV screen  
Mode  
Stereo  
L
AUDIO OUTPUT  
L
L Audio  
Note:  
STEREO  
LEFT  
R
L
R Audio  
L Audio  
- Surround Sound is not available when you are using  
headphones.The SURROUND light will turn off.  
R
L
R
L
L Audio  
R Audio  
R Audio  
L+R Audio  
L+R Audio  
R
RIGHT  
NONE  
Monaural  
R
15  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 16  
Playing a Disc  
DVD-V  
CD  
VCD  
DVD-V  
Basic Playback  
Title Menu  
1
2
3
Press DVD, then TITLE.  
• The title menu will appear.  
If the feature is not available,  
TV screen.  
Press Arrow ( L / K / B / s ) to select an item, and OK to  
confirm selection.  
Getting Started  
Turn on the power of the TV, amplifier and any other compo-  
nents which are connected to the DVD system.  
Make sure the TV and audio receiver (commercially available)  
are set to the correct channel.  
symbol may appear on the  
1
2
3
Press STANDBY-ONy.  
• Playback will begin at the selected Title.  
Press DVD, then OPEN/CLOSE A to open disc loading tray.  
Place the chosen disc in the tray, with the  
label facing up.  
Press PLAY B.  
The tray will close automatically, and  
VCD  
1
2
The title menu will appear.  
Press numerical key pads to select the menu.  
• Playback will start.  
4
F
playback will then start from the first  
chapter or track of the disc. If the play-  
back does not start automatically, press  
PLAY B.  
DVD-V  
Calling Up a Menu During Playback  
When you playback the DVD which a title menu is recorded,  
it may appear on the screen. In this case, refer to “Title  
Menu”.  
• Press DISC/VCR MENU to call up the DVD main menu.  
• Press TITLE to call up the title menu.  
Note:  
5
Press STOP C to stop playback.  
- Contents of menus and corresponding menu operations  
may vary between discs. Refer to the manual accompa-  
nying the disc for details.  
Notes:  
- A “prohibited icon” may appear at the top-right on the  
TV screen during operation, warning that  
a prohibited operation has been encoun-  
tered by the DVD system or the disc.  
- With DVDs that use some titles for play-  
back program signals, playback may start  
from the second title, or it may skip these titles.  
- During the playback of two layered disc, pictures may  
stop for a moment.This happens when the 1st layer  
switches to the 2nd layer.This is not a malfunction.  
VCD  
DVD-V  
Step by Step Playback  
1
2
3
During playback, press PAUSE k.  
• Playback will pause and sound will be muted.  
The disc goes forward by one frame each time PAUSE k is  
pressed.  
To exit step by step playback, press PLAY B.  
VCD  
Cancelling and Calling Back PBC Function  
1
Insert aVideo CD.  
• Playback will start automatically.  
Press STOP C.  
Press numerical key pads to enter the desired track number.  
• PBC function is now cancelled and the playback of theVideo  
CD will start.  
To call back PBC function, press STOP C twice, and then press  
PLAY B.  
CD  
VCD  
DVD-V  
Resume  
1
2
During playback, press STOP C.  
2
3
• Resume message will appear on the TV screen.  
Press PLAY B, playback will resume from the point at which  
playback was stopped.  
To cancel resume, press STOP C twice.  
4
Notes:  
Title menu will appear on the display.  
-The resume information stays on even when the power  
is turned off.  
- Some Video CDs with PBC function resume playback  
from the beginning of the track.  
General Features  
DVD or video CDs may contain menus to navigate the disc  
and access special features. Press the appropriate numerical key  
pads or use Arrow ( L / K / B / s ) to highlight your selection  
in the DVD main menu and press OK to confirm.  
Fast Forward / Reverse Search  
CD  
MP3  
VCD  
DVD-V  
Note:  
1
2
During playback, press FF  
g
or REW  
h
repeatedly to select the  
- Unless stated, all operations described are based on  
remote control use. Some operations can be carried out  
using the menu bar on theTV screen.  
required forward or reverse speed: x2, x8, x50, x100.  
• For video CDs, the speed is fixed at x2, x8, x30.  
• For audio CDs, the speed is fixed at x16.  
• For MP3, the speed is fixed at x8.  
To return to normal playback, press PLAY B.  
CD  
VCD  
DVD-V  
Pause  
1
2
During playback, press PAUSE k.  
Playback will pause and sound will be muted.  
To continue playback, press PLAY B.  
VCD  
DVD-V  
Slow Forward / Slow Reverse  
During playback, press PAUSE k.  
Press FF g or REWh .  
1
2
Slow motion playback will begin and sound will be muted.  
DVD-V  
3
4
Press FF g or REWh repeatedly to select the required  
speed: 1/16, 1/8, 1/2 of the normal playback.  
To return to normal playback, press PLAY B.  
Disc Menus  
1
2
3
Press DVD, then DISC/VCR MENU.  
The DVD main menu will appear.  
If the feature is not available,  
Note:  
symbol may appear on the  
- Slow Reverse is not available on video CDs.  
TV screen.  
If disc menu is available on the disc, audio language, subtitle  
options, chapters for the title and other options will appear for  
selection.  
4
Press Arrow ( L / K / B / s ) to select an item, and OK to  
confirm selection.  
16  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 17  
Playing a Disc  
VCD  
DVD-V  
Zoom  
Repeat  
The Zoom function allows you to enlarge the video image and  
to pan through the enlarged image.  
Press ZOOM during playback.  
• Playback will continue.  
Press ZOOM repeatedly to select the required zoom factor:  
x2, x4 or OFF.  
Use Arrow ( L / K / B / s )to move the zoomed picture  
across the screen.  
To exit zoom mode, press ZOOM to OFF.  
Notes:  
REPEAT are available only during playback.  
1
2
3
4
DVD-V  
RepeatTitle / Chapter  
To activate the repeat function, press REPEAT during playback.  
• The repeat mode changes as described below every time you  
press the button.  
OFF  
CHAPTER  
TITLE  
(repeat off)  
(current chapter repeat)  
(current title repeat)  
- Zooming function does not work while disc menu is  
shown.  
- x4 zoom is not available on some discs.  
- only x2 zoom is available on video CDs.  
Notes:  
- RepeatTitle/Chapter is not available with some scenes.  
-The REPEAT setting will be cleared when moving to  
other title or chapter.  
VCD  
CD  
Track  
CD  
VCD  
There are three ways to begin playback on an Audio CD at a  
specific Track.  
RepeatTrack  
To activate the repeat function, press REPEAT during playback.  
• The repeat mode changes as described below every time you  
press the button.  
Using the Numerical key pads  
1
Press numerical key pads to enter the desired Track number.  
• Playback will start at the selected track.  
• For single digit tracks (1-9), press a single number (eg. track 3,  
press 3).  
OFF  
TRACK  
ALL  
(repeat off)  
(current track repeat)  
(entire disc repeat)  
To play track 26, press +10, 2, 6 on the numerical key pads.  
MP3  
Using the SEARCH MODE  
Press SEARCH/INDEX3.  
The track search display appears.  
Within 30 seconds, select a desired track number using numer-  
ical key pads. For single digits press “0” first.  
• Playback will start at the selected track.  
1
2
GROUP  
(entire group  
repeat)  
OFF  
(repeat off)  
TRACK  
(current track  
repeat)  
ALL  
(entire disc  
repeat)  
Notes:  
Using the SKIP/P- H ,SKIP/P+  
During playback, press  
G
to move to the next track.  
-The REPEAT setting will be cleared when moving to  
other track.  
- Repeat playback does not function during repeat A-B  
playback.  
G
SKIP/P+  
Press it repeatedly to skip subsequent tracks. Press  
H
SKIP/P-  
to go back to the beginning of the current track. Press it repeat-  
edly to go to the previous tracks  
Track number will appear briefly on the DVD system display  
panel.  
• If  
.
CD  
VCD  
DVD-V  
Repeat at A-B  
Press REPEAT A-B at your chosen starting point.  
A- appears briefly on the TV screen.  
Press REPEAT A-B again at your chosen end point.  
A-B appears briefly on the TV screen, and the repeat  
sequence begins.  
1
2
G is pressed while the playback is paused, the  
playback will be paused again after skipping to the next track.  
SKIP/P+  
Note:  
- SKIP/P- H , SKIP/P+ G are not available when play-  
back is stopped.  
3
To exit the sequence, press REPEAT A-B.  
Notes:  
DVD-V  
Title / Chapter Search  
-The repeat A-B section can only be set within the cur-  
rent title (for DVDs), or current track (for audio CDs).  
- Repeat A-B is not available with some scenes in DVD.  
-To cancel the A point which was set, press CLEAR.  
- Repeat A-B playback does not function during title,  
chapter, track or all repeat playback.  
1
2
Press SEARCH/INDEX 3once  
for the Chapter search, twice for  
the Title search during playback.  
Enter the desired chapter/title  
number using numerical key pads.  
/2  
VCD  
DVD-V  
CD  
Time Search  
1
2
During playback, press SEARCH/INDEX 3 three times  
(CD/VCD: twice) to display the Time Search on the TV screen.  
Within 30 seconds, enter a desired disc time using numerical  
key pads.  
• Playback will start at the specified time.  
Press CLEAR to erase the incorrect input.  
3
17  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 18  
Playing a Disc  
CD  
MP3  
Program  
On-Screen Information  
You may determine the order in which tracks will play.  
You can check the MP3 files during playback.  
Press DISPLAY/STATUS/EXIT.  
• The name of the file currently in play will be displayed.  
Press DISPLAY/STATUS/EXIT again to show the track number,  
the elapsed time, the repeat status, and the playback status at  
the top of the screen.  
1
2
In stop mode press MODE/SYSTEM.  
The PROGRAM screen will appear.  
Press or to select a track,  
then press OK.  
• Press CLEAR to erase the  
most recently entered pro-  
gram.  
1
2
TOTAL  
T
T
will be displayed when the repeat play has been selected.  
T - indicates Track repeat  
T
T
T
T
T
T
3
Press PLAY B to play the pro-  
grammed tracks.  
G- indicates Group (folder) repeat  
A - indicates Disc repeat  
OK  
T
Notes:  
3
Press DISPLAY/STATUS/EXIT again to exit.  
- While the program is being  
played back, the STOP C works as follows.  
- Press STOP C once and then PLAY again, playback will  
restart from the point where STOP C was pressed.  
MP3  
Track Selection  
B
1
2
Press SEARCH/INDEX 3during playback.  
• The FILE LIST will appear.  
Select a desired track using Arrow (L/K/B/s)  
• Press B when you want to go to the next hierarchy.  
• Press s when you want to go back to the previous hierarchy.  
Press PLAY B to start playing  
(Program continued)  
- Press STOP C twice and then PLAY  
B
again, playback will  
.
restart from the track in the usual way. (Program cleared)  
- Up to 99 programs can be entered.  
- If you like to repeat the current track in the program, press  
3
REPEAT repeatedly until  
TRACK appears during play-  
Notes:  
back. If you like to repeat the entire program press  
- Press SEARCH/INDEX  
3to EXIT.  
REPEAT repeatedly until  
ALL appears during playback.  
- Some selections may take a while to be recognized.  
CD  
Random Playback  
MP3  
Random Playback  
This shuffles the playing order  
of tracks instead of playback in  
the sequence.  
In stop mode, press  
MODE/SYSTEM twice.  
1
2
Press MODE/SYSTEM twice while playback is stopped.  
Press PLAY B to play the tracks in random order.  
RANDOM  
CD [AUDIO]  
TOTAL 0:45:55  
1
2
RANDOM PROGRAM  
-- no indication --  
MP3  
Program  
RANDOM screen appears.  
Press PLAY B to start ran-  
dom playback.  
PLAY  
This feature allows you to program a mp3 disc to play in a  
desired sequence.  
Press MODE/SYSTEM during playback is stopped.  
• The PROGRAM screen will appear.  
Press K or L to select a track, then press OK, to save it in a  
program.  
• Press CLEAR to erase the incorrect input.  
Press PLAY B to start programmed playback.  
Note:  
1
2
- If you like to repeat the current track in the random  
selection, press REPEAT repeatedly until TRACK  
appears during playback. If you like to repeat the entire  
random selection press REPEAT repeatedly until  
appears during playback.  
ALL  
3
MP3  
MP3/JPEG Playback  
DVD-V  
Audio Language  
When a CD with MP3 or JPEG files is inserted in the DVD sys-  
tem, the MP3 or JPEG menu will appear on the TV screen, and  
number of tracks is displayed on the front panel.  
In stop mode, press K or L to  
The DVD system allows you to select a language during DVD  
disc (if multi language available) playback.  
Press AUDIO/BAND during playback.  
Press AUDIO/BAND repeatedly to select your desired lan-  
guage.  
1
2
1
select the desired group, MP3  
track or JPEG file.  
• If a group is selected, press  
FOLDER  
MP3  
JPEG  
Notes:  
- Pressing AUDIO/BAND may not work on some DVDs with  
multiple audio languages (e.g. DVDs which allow audio lan-  
guage setting on the disc menu).  
- Some discs allow audio language setting on the disc menu.  
(Operation varies between discs, so refer to the manual  
accompanying the disc.)  
PLAY B or OK to go on to  
the track selection screen.  
OK  
Press K or L to choose a  
PLAY  
track, then press PLAY B or  
OK.  
• If a track is selected, press PLAY B or OK to start playing  
tracks. Starting from the one you’ve just chosen the subse-  
quent tracks will be played.  
• Choose FIRST PLAY to start playback from the beginning of  
the listed tracks.  
• Press TITLE to return to the first item.  
Press STOP C to stop playback.  
Notes:  
VCD  
CD  
Stereo Sound Mode  
1
Press AUDIO/BAND repeatedly during playback to select  
between STEREO, L-CH or R-CH.  
STEREO - both right and left channels are active (stereo)  
L-CH - only left channel is active  
2
- Folders are known as Groups; files are known asTracks.  
R-CH - only right channel is active  
3
- MP3 files are accompanied by  
- JPEG files are accompanied by  
icon.  
icon.  
- Maximum of 255 folders can be recognized.  
- Maximum of 256 files can be recognized.  
- Up to 8 hierarchies can be created.  
This DVD system recommends the use of files recorded at the  
below specifications:  
• Sampling frequency: 44.1kHz or 48kHz  
• Constant bit rate: 112kbps ~ 320kbps.  
18  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 19  
Playing a Disc  
DVD-V  
DVD-V  
Subtitle Language  
Parental Control  
The DVD system allows you to select a language for subtitle  
during DVD disc (if available) playback.  
Press DVD, then SUBTITLE during playback.  
Press SUBTITLE repeatedly to select your desired subtitle lan-  
guage.  
The selected language will be displayed on the display bar at  
the top of the screen.  
To turn off subtitles, press SUBTITLE repeatedly until OFF  
appears.  
Parental Control limits the disc viewing that exceed your set-  
tings. (with a password or playback will stop.)  
This feature allows you to prevent discs with alternative scenes  
from being played by your children.  
1
2
Parental Level  
Parental Level allows you to set the rating level of your DVD  
discs. Playback will stop if the disc’s ratings exceed the level  
you set.  
Press SYSTEM MENU/PROG in STOP mode.  
Press B to select CUSTOM, then press OK.  
Press s or B to select PARENTAL, then press OK.  
Enter your four-digit password then press OK.  
Press K or L to select PARENTAL  
3
1
2
3
4
5
Notes:  
- Some discs allow subtitle language setting on the disc  
menu. (Operation varies between discs, so refer to the  
manual accompanying the disc.)  
- If the desired language is not shown after pressing SUBTI-  
TLE several times, the disc does not have subtitles in that  
language.  
- If you choose a Language that has a 3 letter language  
code, the code will be displayed every time you change the  
Subtitle language setting. If you choose any other lan-  
guages,---’ will be displayed instead. (Details are on page  
21.)  
LEVEL, then press OK.  
6
7
Press K or L to select the desired  
level, then press OK.  
PARENTAL  
PARENTAL LEVEL ALL  
Press SYSTEM MENU/PROG to exit.  
Notes:  
- When doing this for the first time, enter any 4 digits.  
(except for 4737)That number will be used as the pass-  
word from the second time onward.  
-To change the password, press K or L to select CHANGE,  
then press OK. Enter the four-digit pass-word, then press  
OK.  
- With some DVDs, it may be difficult to find if they are com-  
patible with parental lock. Be sure to check if the parental  
lock function operates in the way that you have set.  
- Record the password in case you forget it.  
DVD-V  
Camera Angle  
Some DVD discs contain scenes which have been shot simulta-  
neously from various angles.You can change the camera angle  
when the (  
) icon appears on the screen.  
1
2
Press DVD, then ANGLE during playback.  
The selected angle will be displayed on the display bar at the  
top of the screen.  
IfYou Forget the Password  
Press 4, 7, 3, 7 at step 4.  
• Password will be cleared and parental level will be set to ALL.  
Proceed the above steps 4-5 again.  
1
2
Press ANGLE repeatedly to select your desired angle.  
Changing the On-Screen Display  
DVD-V  
Control Levels  
ALL  
All parental lock is cancelled.  
Level 8  
You can check information about the current  
disc by pressing DISPLAY/STATUS/EXIT on the remote  
control.  
Press DISPLAY/STATUS/EXIT during playback to show current  
Chapter.  
DVD software of any grade (adult/general/children) can be  
played back.  
Levels 7 to 2  
Only DVD software intended for general use and children can  
be played back.  
1
Level 1  
a The elapsed and remaining playing time of the current chap-  
ter will be displayed.  
Press DISPLAY/STATUS/EXIT again to show current Title.  
a The elapsed and remaining playing time of the current title  
will be displayed.  
Press DISPLAY/STATUS/EXIT the third time.  
a The BIT RATE, layer number (if available) and the current  
repeat setting will be displayed.  
Press DISPLAY/STATUS/EXIT the fourth time to remove the  
display.  
Only DVD software intended for children can be played back,  
with those intended for adult and general use prohibited.  
2
3
4
VCD  
CD  
Marker Setup Screen  
Use markers to memorise your favourite places on a disc.  
DVD-V  
1
Press SEARCH/INDEX  
ing playback.  
3four times (CD/VCD: three times) dur-  
The display screen and Markers will appear on the TV screen.  
2
3
Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9, or 10 and ensure that  
-- -- : --” appears in the display.  
VCD  
CD  
When reaches the desired point, press OK.  
• The Title or Track and elapsed playing time will appear in the  
TV screen.  
To return to the Marker later, press SEARCH/INDEX 3four  
times (CD/VCD: three times) during playback and s or B to  
choose the desired marker, then press OK.  
Notes:  
1
2
3
Press DISPLAY/STATUS/EXIT during playback, the current  
Track will be displayed on the TV screen.  
a The elapsed and remaining playing time of the current total  
track will be displayed.  
Press DISPLAY/STATUS/EXIT again to show current Total  
Track.  
a The elapsed and remaining playing time of the current total  
track will be displayed.  
Press DISPLAY/STATUS/EXIT the third time to remove the dis-  
play.  
4
5
-
-
-
Opening the disc tray or turning off the power or select  
AC at step 2 and press OK will erase all Markers.  
To clear a marker, using s or B, position the cursor on  
to the marker number to be cleared and press CLEAR.  
You can mark up to 10 points.  
Press SEARCH/INDEX 3or RETURN to exit.  
19  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 20  
DVD Setup  
Audio Setting  
Speaker Balance  
Choose the appropriate Audio settings for your equipment as it  
only affect during the playback of DVD discs of the DVD sys-  
tem.  
Press SYSTEM MENU/PROG in STOP mode.  
Press B to select CUSTOM, then press OK.  
• CUSTOM mode will appear.  
Press s or B to select AUDIO, then OK to confirm.  
Press K or L to select the below items, then press OK.  
DRC (Dynamic Range Control) :  
You can test the volume balance of each speaker with this pro-  
cedure.  
Press DVD to put the DVD system in DVD mode.  
• The red DVD light will be on the front of the DVD system.  
Press STOP C to stop Disc playback if necessary.  
Press SYSTEM MENU/PROG.  
• The QUICK SETUP screen will appear.  
Press B to select CUSTOM at the top of the menu, then press  
OK.  
1
1
2
2
3
3
4
To compress the range of sound volume.  
The default setting is OFF.  
• This menu will appear.  
Press B to select AUDIO at the top of  
the menu, then press OK.  
Press p to select 5.1CH, then press  
OK.  
Press p to select BALANCE, then  
press OK.  
TEST will be selected. Press OK.  
• The test sound will come from each speaker (in the order  
indicated in the menu) so you can check the volume of each  
speaker.  
4
5
6
7
DOLBY DIGITAL :  
Set to ON when the player is connect-  
ed to Dolby Digital Decoder.  
QUICK  
AUDIO  
AUDIO  
DRC  
OFF  
ON  
DRC  
OFF  
ON  
DOLBY DIGITAL  
DOLBY DIGITAL  
DOWN SAMPLING ON  
DOWN SAMPLING ON  
MPEG  
5.1CH  
OFF  
MPEG  
5.1CH  
OFF  
(ON : Output by Dolby Digital)  
(OFF : Convert the Dolby Digital to PCM)  
The default setting is ON.  
DOWN SAMPLING :  
Set to ON when outputting in 48kHz.  
The default setting is ON.  
8
9
Press OK to stop the test.  
Press o or p to select the speaker for which you want to  
adjust the volume, then press OK.  
When playing disc with copyright Protection  
• If you select OFF, copyright protection will be activated and  
sound will be down sampled at 48kHz.  
MPEG :  
Set to ON when the player is connected MPEG Decoder.  
(ON: Output by MPEG)  
(OFF: Convert the MPEG to PCM)  
• The default setting is OFF.  
Press SYSTEM MENU/PROG to exit.  
You will hear the test sound from that speaker.  
10 Press o or p to adjust the volume of the selected speaker,  
then press OK.  
• The BALANCE menu will reappear, showing the value you  
selected for that speaker.The available volume range is -6 dB  
to +6 dB. Press o or p to see all the available dB values.  
11 Press SYSTEM MENU/PROG to remove the menu.  
Note:  
5
- You cannot hear the test sound from the Subwoofer.  
DelayTime  
Set the delay time for the Center and Rear (Surround) speakers  
to suit your listening position. If you usually sit closer to the  
Center speaker than the Front speakers, increase the Center  
delay time to improve the Surround Sound effect. If you plan to  
sit closer to the Rear speakers than the Front speakers,  
increase the Rear delay time.  
Press DVD to put the DVD system in DVD mode.  
The red DVD light will be on the front of the DVD system.  
Press STOP C to stop Disc playback if necessary.  
Press SYSTEM MENU/PROG.  
• The QUICK SETUP screen will appear.  
Press B to select CUSTOM at the top of the menu, then press  
OK.  
• This menu will appear.  
Press B to select AUDIO at the top of  
DVD-V  
Language Setting  
Language options are not available with some discs.  
1
2
Press SYSTEM MENU/PROG in STOP mode.  
Press B to select CUSTOM, then press OK.  
• CUSTOM mode will appear.  
Press s or B to select LANGUAGE, then OK to confirm.  
Press K or L to select the below items, then press OK.  
3
4
1
AUDIO :  
Sets the audio language.  
SUBTITLE :  
Sets the subtitle language.  
DISC MENU :  
2
3
Sets the language for DVD Menu.  
PLAYER MENU :  
QUICK  
4
5
6
7
8
Sets the language for the On-Screen display.  
Press K or L to select a setting, then press OK.  
• If OTHER is selected in the AUDIO, SUBTITLE or DISC  
MENU screen, press four-digit number to enter the code for  
the desired language. (Refer to the language code list on page  
21).  
the menu, then press OK.  
Press p to select 5.1CH, then press  
OK.  
AUDIO  
5
6
DRC  
OFF  
ON  
DOLBY DIGITAL  
DOWN SAMPLING ON  
MPEG  
5.1CH  
OFF  
DELAY TIME will be selected. Press  
OK.  
Press o or p to select CENTER or SURROUND (for the  
REAR speakers), then press OK.  
Press o or p to select a delay time in milliseconds, then press  
OK.  
• Only the languages supported by the disc can be selected.  
Press SYSTEM MENU/PROG to exit.  
Note:  
- Language Setting for Audio and Subtitle is not available  
with some discs.Then use AUDIO and SUBTITLE. Details  
are on pages 18-19.  
The default setting for the CENTER Delay time is 0 ms.The  
default setting for the SURROUND (rear) Delay time is 5 ms.  
Press SYSTEM MENU/PROG to remove the menu.  
9
20  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 21  
DVD Setup  
DVD-V  
Display Setting  
Use markers to memorise your favourite places on a disc.  
1
2
Press SYSTEM MENU/PROG in STOP mode.  
Press B to select CUSTOM, then press OK.  
• CUSTOM mode will appear.  
3
4
Press s or B to select DISPLAY, then OK to confirm.  
Press K or L to select the below items, then press OK.  
TV ASPECT :  
QUICK  
Press K or L for an item selection,  
then press OK.  
DISPLAY  
TV ASPECT  
4:3 LETTER BOX  
ON  
Select 4:3 LETTER BOX for a black  
bars appears on top and bottom of  
the screen.  
ANGLE ICON  
AUTO POWER OFF ON  
Select 4:3 PAN & SCAN for a full height picture with both sides  
trimmed.  
Select 16:9 WIDE if a wide-screen TV is connected to the DVD  
system.  
The default setting is 4:3 LETTER BOX.  
ANGLE ICON :  
Press OK repeatedly to turn Angle icon ON or OFF.  
The default setting is ON.  
AUTO POWER OFF :  
Press OK repeatedly to turn Auto Power off ON or OFF.  
The default setting is ON and it will turn the DVD system to off  
automatically after 35 minutes of no use.  
Press SYSTEM MENU/PROG to exit.  
Notes:  
5
- Be sure to press SYSTEM MENU/PROG, or the setting  
will not work.  
- You can also choose the item by pressing the numbers.  
Language  
Code Language  
Code Language  
Code Language  
Code  
A-B  
French [FRE]  
Frisian  
Galician  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Gujarati  
Hausa  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Marathi  
Moldavian  
Mongolian  
Nauru  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
Siswat  
Slovak  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Slovenian  
Somali  
Spanish [SPA]  
Sundanese  
Swahili  
Swedish [SWE]  
T
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Hebrew  
Hindi  
Nepali  
Norwegian [NOR] 6061  
Basque  
Hungarian [HUN]  
I-K  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Irish [IRI]  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
O-R  
Bengali;Bangla  
Bhutani  
Occitan  
Oriya  
Oromo(Afan)  
Panjabi  
Pashto;Pushto  
Persian  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Bihari  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Polish  
Portuguese [POR] 6266  
C-E  
Quechua  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
S
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
6367  
6459  
6461  
6467  
Cambodian  
Catalan  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
U-Z  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Chinese [CHI]  
Corsican  
Croatian  
Czech  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
Korean [KOR]  
Kurdish  
L-N  
Laothian  
5861  
5847  
5868  
5860  
5866  
F-H  
Latin  
Latvian;Lettish  
Lingala  
Faroese  
Fiji  
5261  
5256  
5255  
Sindhi  
Singhalese  
Finnish [FIN]  
Lithuanian  
21  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 22  
FM/MW Radio  
Selecting Radio Station  
Preset Radio Stations  
1
Press TUNER to select Tuner mode.  
Automatic Presetting  
You can store up to 40 preset radio stations automatically by  
following these steps.  
Press TUNER to select Tuner mode.The red TUNER light will  
appear on the front of the System.  
Press and hold SYSTEM MENU/PROG until AUTO appears on  
the System’s display panel, then release SYSTEM MENU/PROG.  
The System will start scanning for stations. FM stations will be  
set first, followed by MW stations.The System will store the  
first 40 stations found.When programming is finished, the last  
preset station will be tuned.  
Or, you can press SYSTEM MENU/PROG or STOP C to stop  
presetting stations.The radio stations scanned so far will be  
stored.The last stored station will be tuned.  
Note:  
The red TUNER light will appear on the front of the System.  
The current radio frequency (station number) will appear on  
the display panel.  
1
2
2
3
Press AUDIO/BAND to select FM or MW.  
Press s or B to select a preset radio station.  
You also can select a preset radio station by pressing the  
Number buttons.  
The preset number will appear in the display panel to the left  
of the station’s frequency.When choosing preset stations 10  
and above, enter both digits within two seconds to ensure you  
enter the complete number.  
3
4
Press SKIP/P+ i or SKIP/P– j to change the radio fre-  
quency by one-tenth.  
• For example, to go from 100.1 to 100.2, press SKIP/P+ i.  
Use these buttons to fine-tune the station you want.  
Or, to search for the next available station, press and hold  
SKIP/P+ i or SKIP/P– j for one second, then release.  
SEARCH will appear on the display panel when you release  
the button.When a station with sufficient signal strength is  
found, the station will be tuned and searching will stop.You  
can press and hold SKIP/P– j to search backward to the  
last available station.  
- If a radio station has been stored in one of the presets, it  
will not be stored again under another preset number  
during Automatic Presetting.  
Manual Presetting  
If Automatic Presetting does not memorize all the stations you  
want, you can preset individual stations manually.  
Press SKIP/P+ i or SKIP/P– j to select the station you  
want to designate as a preset station.  
Press SYSTEM MENU/PROG.The next available preset number  
and the station’s frequency will blink in the display panel.To  
store the station under a different preset number, press { or  
B to choose a preset number.  
If Prog ... FULL appears before the station’s frequency starts  
blinking, there are already 40 presets. Press { or B to choose  
a preset that you want to replace with the new station you are  
presetting now.  
1
2
Note:  
- If the sound is distorted during MW reception, press  
o /p on the remote to reduce the noise.This is effective  
only for the current MW station.This does not work for  
every situation.There may be interference from other  
electrical appliances or weak MW signals.  
3
Within 20 seconds, press SYSTEM MENU/PROG to store the  
radio station under the designated preset number. (After 20  
seconds, the Tuner will exit presetting mode. If you’ve made a  
mistake, wait 20 seconds for the frequency and preset number  
to stop flashing, then try again.)  
Note:  
-To erase a preset, press B or { to select the preset sta-  
tion you want to delete.Then, press and hold STOP C on  
the remote until PRESET . . . DELETED appears on the  
System’s display panel.The preset numbers of all other  
radio stations with higher numbers will decrease by one.  
Maintenance  
Cleaning the Cabinet  
• Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abra-  
sives.  
Cleaning Discs  
• When a disc becomes dirty, clean it with a cleaning cloth.Wipe the disc from the centre out. Do not wipe in a circular motion.  
• Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analogue records.  
Cleaning the disc lens  
• After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good playback quality, clean the disc lens with Philips CD  
Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with the cleaner.  
22  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 23  
Specifications  
VCRVideo Heads  
20 Hz to 44 kHz (surround off)  
OperatingTemperature  
Four heads - Hi-Fi  
(sample rate: 96 kHz)  
5°C to 40°C  
Audio CD: 20 Hz to 20 kHz  
Antenna  
Relative Humidity  
VHF/UHF - 75 ohm external antenna terminal  
Signal-to-Noise Ratio  
Audio CD: 120 dB (JEITA:  
Japan Electronics and Information Technology  
Industries Association)  
30% to 80%  
RF Output Signal  
Channel 22 to 69  
75 ohms unbalanced  
Dimensions (w x h x d)  
Receiver (System):  
43.5 x 9.9 x 39.2 cm  
Dynamic Range  
DVD (linear sound): 99 dB  
Audio CD: 99 dB (JEITA)  
DVD Color System  
PAL  
Front Speakers:  
9.4 x 15.5 x 8.9 cm  
Amplifier  
Rear Speakers:  
9.4 x 15.5 x 8.9 cm  
Total Distortion Factor  
Audio CD: 0.003% (JEITA)  
DVD: 0.003%  
Output power (rms, 4 ohms, 1 kHz, 10% Total  
Harmonic Distortion) 360W total  
- Front 75W/channel  
Center Speaker:  
43.5 x 7.2 x 6.4 cm  
- Center 75W  
- Rear (Surround) 75W/channel  
- Subwoofer 75W  
Wow and Flutter  
Below the measurement limitation  
( 0.001% W PEAK) (JEITA)  
Subwoofer:  
19.6 x 39.1 x 43.2 cm  
Weight  
FTC(Federal Trade Commission)  
(4 ohms, 120 Hz to 12.5 kHz,  
10 % Total Harmonic Distortion)  
2 X 60W  
Power Requirement  
7.8 kg.  
220–240V AC, 50 Hz  
Power Consumption  
Power on: 50 W  
Power off (standby): 5 W  
NOTE: Designs and specifications are subject to  
change without notice.  
Frequency Response  
DVD (linear sound):  
20 Hz to 22 kHz  
(WhenCLOCK DISPLAY set toOFF.)  
(sample rate: 48 kHz)  
Troubleshooting  
Problem  
Solution  
No power  
No picture  
Check if the AC power cord is properly connected.  
Check if the TV is switched on.  
Check the video connection.  
Sometimes a small amount of picture distortion may appear.This is not a malfunction.  
Connect the DVD system directly to the TV.  
Make sure the disc is compatible with the DVD system.  
Distorted picture  
Completely distorted picture or  
black/white picture with DVD  
No sound or distorted sound  
– Adjust the volume.  
– Check that the speakers are connected correctly.  
No audio at digital output  
– Check the digital connections.  
– Check if the audio format of the selected audio language matches your receiver capabilities.  
– Use a DIGITAL AUDIO OUT jack when outputting the DTS audio.  
– Check that the SCART cable is connected to the correct device (See Connecting to a TV)  
No DTS audio at analog output  
No sound and picture  
Picture freezes momentarily during  
playback  
– Check the disc for fingerprints/scratches and clean with a soft cloth wiping from centre  
edge.  
– This may happen when you use the disc recorded in the non-seamless manner.This is not a  
malfunction.  
Disc can’t be played  
– Ensure the disc label is facing up.  
– Check if the disc is defective by trying another disc.  
– Reset the unit by switching the DVD system off, then on again.  
No return to start-up screen when disc is  
removed  
The System does not respond to the  
remote control  
– Aim the remote control directly at the sensor on the front of the System.  
– Reduce the distance to the System.  
– Replace the batteries in the remote control.  
– Re-insert the batteries with their polarities (+/– signs) as indicated.  
To completely reset the System, unplug the AC cord from the AC outlet for 5-10 seconds.  
Buttons do not work or the System stops  
responding  
The System does not respond to some operat-  
– Operations may not be permitted by the disc.  
Refer to the instructions of the disc.  
– Use a commonly available cleaning CD/DVD to clean the lens before sending the DVD sys-  
tem for repair.  
ing commands during playback.  
The DVD system cannot read CDs/DVDs  
The System switches from DVD mode toVCR  
mode after 35 minutes  
Playback will stop for more than 35 minutes and no button is pressed.  
TheVCR do not record aTV program  
Make sure the tape has a record tab.  
Make sure the System is inVCR position.  
Check the TV and the System channel are similar.  
Make sure the recording start and stop times are set correctly.  
Make sure the tape has a record tab.  
Make sure the clock is set.  
The System may not perform or continue a timer recording if the power fails for more than  
1 minute.  
The System does not perform a timer  
The motor (cylinder) rotates even when tape  
playback is stopped  
You cannot insert a tape  
To enable quick play mechanism, the cylinder will rotate for about five minutes.This is nor-  
mal.  
Insert a tape, window side up with the record tab facing you.  
Gently push on the center of the tape when putting into the System.  
Make sure the power plug is completely connected to a power outlet.  
Make sure the tape has a record tab.  
You cannot remove a tape  
The System ejects the tape when you press REC  
orTIMER SET for a timer recording.  
Radio reception is poor.  
If the signal is too weak, adjust the antenna or connect an external antenna for better  
reception.  
Increase the distance between the System and your other electronics equipment.  
If you are unable to remedy a problem by following these hints, consult your dealer or service centre (HOTLINE).  
23  
 
E9015ED_EN.qx3 03.7.29 6:32 PM Page 24  
PHILIPS NORGE AS  
Sandstuveien 70,  
PO Box 1, Manglerud  
N-0612 Oslo  
PHILIPS  
Österreichische Philips Industrie  
GmbH  
Triesterstrasse 64  
1101 Wien  
PHILIPS PORTUGUESA, S.A.  
Consumer Information Center  
Rua Dr.António Loureiro Borge, nr.5  
Arquiparque, Miraflores  
P-2795 L-A-VEHLA  
NORWAY  
Phone: 2274 8250  
AUSTRIA  
PORTUGAL  
Tel: 0810 001 203  
Phone: 021-4163063  
OY PHILIPS AB  
Sinikalliontie 3,  
02630 Espo  
PHILIPS INFO CENTER  
Alexanderstrasse 1  
20099 Hamburg  
PHILIPS CE,The Philips Centre,  
420 - 430 London Road,  
Croydon, Surrey  
Helsinki  
FINLAND  
GERMANY  
CR9 3QR  
puh. 09 615 80 250  
Tel: 0180-53 56 767  
UNITED KINGDOM  
Phone: 0208-665-6350  
PHILIPS KUNDTJÄNST  
Kollbygatan 7,  
Akalla,  
16485 Stockholm  
SWEDEN  
SERVICE CONSOMMATEURS  
PHILIPS  
BP 0101  
75622 Paris Cédex 13  
FRANCE  
CONSUMER SERVICES  
Prags Boulevard 80. PO Box 1919,  
DK-2300 Copenhagen S  
DANMARK  
Phone: 08-598 52 250  
Phone: 0825-889 789  
TIf: 32 88 32 00  
PHILIPS POLSKA  
AL. Jerozolimskie 195B  
02-222 Warszawa  
POLSKA  
PHILIPS ELECTRONICS  
IRELAND LIMITED  
Consumer Information Center  
Newstead, Clonskeagh  
DUBLIN 14  
PHILIPS REPRESENTATION  
OFFICE  
Ul. Usacheva 35a  
119048 MOSCOW  
RUSSIA  
Tel.: (022)-571-0-571  
Phone: 01-7640292  
Phone: 095-937 9300  
PHILIPS SERVICE  
V Mezihori 2  
180 00 Prage  
CZECH REPUBLIC  
Phone: (02)-3309 9240  
PHILIPS CONSUMER  
ELECTRONICS  
Servizio Consumatori  
Via Casati 23  
PHILIPS INFO CENTER  
Fegistrasse 5  
8957 Spreitenbach  
SUISSE  
20052 Monza - Milano  
ITALY  
Phone: 800 820026  
Tel.: 0844-800 544  
PHILIPS Iberia, S.A.  
C/MartinezVillergas, 49  
28027 MADRID  
PHILIPS CUSTOMER CARE  
CENTER  
SPAIN  
Phone: 902-11 33 84  
PHILIPS MÁRKASZERVIZ  
Kinizsi U 30 - 36  
Budapest 1092  
HUNGARY  
Phone: (01)-2164428  
Twee Stationsstraat 80/  
80 Rue des Deux Gares  
1070 BURSSEL/BRUXELLES  
BELGIUM (for BENELUX)  
Tel: 070-222303  
Meet Philips at the Internet  
The products and services described herein are not necessarily  
available in all countries  
Due to continuous product improvements this document is  
subject to change without notice.  
Printed in China  
0VMN03813 / E9015ED*****  
 

Pelco Network Router GW5000 User Manual
Philips Computer Monitor 105S26 User Manual
Philips Trimmer NT9110 User Manual
Philips Water Dispenser WP3890 User Manual
Pioneer DVD Player BDP 51FD User Manual
Pioneer Stereo System VSX 818V K User Manual
Planet Technology Network Router WRT 416 User Manual
Polk Audio Speaker VM20 User Manual
Poulan Tiller 417134 User Manual
Promise Technology Computer Hardware SATA 300 User Manual