Philips Digital Photo Frame ESXMIM User Manual

PhotoFrame Firmware Upgrade Instructions  
Applicable models 8FF3WMI  
Firmware version  
Release date  
1.01  
September 19, 2008  
Release notes  
Important notice before updating  
The firmware upgrade process will remove all photos currently stored on PhotoFrame.  
Please make sure all photos on PhotoFrame are properly backed up before updating.  
!
!
Please follow the steps below to upgrade the PhotoFrame firmware.  
1
2
Format SD (Secure Digital) card  
Copy all files from the ‘Firmware’ folder into the root folder of the SD card  
(The root folder is the ‘highest’ folder in hierarchy, for example F:\)  
3
4
5
6
Make sure PhotoFrame is powered Off  
Insert SD into PhotoFrame with the new firmware into the PhotoFrame  
Push the Power button to power on the PhotoFrame  
The firmware upgrade will start automatically  
Warning: Upgrade takes about 1 minute.  
During the upgrade do not disconnect power, remove the memory or make new  
connections. Otherwise this may harm your PhotoFrame.  
!
!
7
8
9
When "Please reboot system!" shows, firmware upgrade has finished  
Remove the memory from the PhotoFrame  
Power Off the PhotoFrame and Power On afterwards by pushing the Power button  
The upgrade has completed  
10  
You can check the new firmware version via Setup Status Firmware.  
 

Petsafe Carpet Cleaner LDT 433 User Manual
Philips CRT Television 14PT1342 User Manual
Pioneer CD Player PD F407 User Manual
Polaroid Digital Camera i1032 User Manual
Polk Audio Speaker System PSW250 User Manual
Poulan Lawn Mower 169482 User Manual
Precision Power Music Mixer MaxxBass User Manual
ProForm Treadmill PFTL78580 User Manual
ProMaster Binoculars 15 45X65 User Manual
PYLE Audio Heart Rate Monitor PHRM26 User Manual