Philips Home Theater System LX3500 User Manual

Use this simple and quick way to watch your favorite  
DVD movie and enjoy your Home Cinema experience!  
Quick Use  
Guide  
Front Speaker (Right)  
Center Speaker  
Front Speaker (Left)  
Rear of TV  
AV IN  
75  
AUDIO  
OUT  
o connect your LX3500 Home  
TCinema Surround Receiver:  
L
S-VIDEO  
IN  
R
SPEAKER CONNECTIONS  
x5  
1
AVIN  
75  
a. Connect the Front Right (+,-) speaker wires to  
AUDIO  
OUT  
L
R
the FR (Red +,-) speaker terminals on the Receiver.  
Connect the Front Left (+,-) speaker wires to the  
FL (White +,-) speaker terminals.  
1a  
Connect the Center speaker wires to the C (Green  
+,-) speaker terminals.  
HELPFUL HINTS  
b. Connect the Surround Right (rear speaker) wires to  
the SR (Gray +,- ) speaker terminals.  
Your TV capability determines which  
type of video connection you can make  
with the DVD Receiver.  
Connect the Surround Left (rear speaker) wires to  
the SL (Blue +,- ) speaker terminals.  
2
c. Connect the Subwoofer speaker AUDIO INPUT  
jack to the WOOFER LINE OUT jack on the receiv-  
er. Use the supplied black cable with RCA connec-  
tors on each end.  
If your TV only has a single Antenna In  
jack, you will need an accessory RF  
75  
COMPONENT  
VIDEO OUT  
PrCr  
PbCb  
Y
P-SCAN  
FR  
SR  
AM  
ANTENNA IN  
Modulator  
to view DVD playback on your  
CENTER  
LINE OUT  
VIDEO  
OUT  
+
+
AUDIO OU  
OFF ON  
TV. The RF Modulator converts the video from  
the Receiver so it can play through the TV’s  
Antenna connector.  
See your electronics retailer or contact Philips for  
details on RF Modulator availability.  
If you use an RF modulator, set the TV to channel  
3 or 4. Set the RF modulator’s 3/4 switch to the  
same channel.  
S-VIDEO  
OUT  
AUDIO IN  
DIGITAL OUT  
-
-
x1  
VIDEO CONNECTION  
R
SPEAKER  
4
AM/FM  
ANTENNA  
2
CLASS 1  
LASER PRODUCT  
WOOPER  
LINE OUT  
AUX  
OPTICAL  
COAXIAL  
Connect the yellow VIDEO OUT jack on the  
Receiver to the matching VIDEO IN jack on the TV.  
Rear Speaker  
(Surround Right)  
Rear Speaker  
(Surround Left)  
OPTIONAL TV Audio Connection  
In order to listen to normal TV broadcast channels  
through the Home Cinema Surround Receiver (if your  
TV has AUDIO OUT jacks) you must make an audio  
connection.  
Back of RF Modulator  
(example only)  
1b  
ANT IN  
TO TV  
AUDIO IN  
VIDEO  
IN  
R
L
CH3 CH4  
IMPORTANT! The Receiver will use all surround  
sound speakers only if the TV broadcast is in a surround  
sound format (Dolby Digital, DTS, Dolby Pro Logic). If  
the broadcast is in stereo only, some of the surround  
speakers will not be active.  
1c  
Antenna or Cable TV Signal  
Connect the red and white pair of audio cables from  
the TV AUDIO IN (Left & Right) jacks on the  
Receiver to the AUDIO OUT (Left & Right) jacks on  
the TV.  
To DVD Receiver  
Connecting Speaker Cable  
Note: You must turn on the  
power switch on the front  
of Subwoofer when in  
operation.  
S-VIDEO  
IN  
Pr/Cr  
Pb/Cb  
Y
If your TV has S-Video or  
Component (PB PR Y) jacks  
you can connect the receiver using  
one of these for a higher quality connection. See  
.0  
4
7
(1  
"
2
m
m
)
P
U
S
H
IN  
NOTE: When listening to TV programs, the Receiver  
must be set to the AUX mode for the sound to be heard.  
Subwoofer  
PUSH  
DOWN  
your instruction manual for details.  
a
b
c
Flip the page to start DVD playback and arrange the surround speakers.  
 

Peavey Stereo Amplifier VX 15 K User Manual
Philips Car Stereo System 9P5031C1 User Manual
Philips DVR TL24A5T User Manual
Philips Electric Shaver 6891XLD User Manual
Philips Indoor Furnishings 37351 User Manual
Pioneer Car Stereo System DEH P410UB User Manual
Pioneer Speaker HTP SB300 User Manual
Polaris Model Vehicle 550 EPS User Manual
Polaroid Digital Camera PDC 2150 User Manual
Prestigio eBook Reader PER3162 User Manual