Set up
Connect
1
2
Finding the viewing channel
Connect the speakers and
subwoofer
Connect the various colored plugs from the speakers
and subwoofer to the same colored jacks at the rear of
the DVD system.
Connect the DVD system to TV
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A
C
D
A
Television ( rear)
A Press STANDBY ON on the DVD system.
B Press SOURCE on the DVD system until “DISC”
appears on the display panel.
FRONT FRONT
RIGHT LEFT
FRONT
CENTER
C
D
A
C
B
DVD System (rear)
A
C Turn on the TV. Use the TV’s remote control to
D
DVD System (rear)
select the correct viewing channel for the DVD
system.
B
You should see the blue DVD background on the
TV.
A Place the center speaker above or close to the TV.
Note To search for the correct viewing channel,
press the Channel Down button on the TV’s remote
control repeatedly (or AV, SELECT, ° button) until
you see the blue DVD background.
REAR
LEFT
REAR
RIGHT
B Place the subwoofer on the floor, at least one meter
A Use the supplied composite video cable to connect
the CVBS jack on this DVD system to the VIDEO IN
jack on your TV.
away from the TV.
SUB-
WOOFER
C Place the front speakers at equal disctances from the
TV.
B Plug in the power cable from the DVD system to an
D Place the rear speakers at normal listening ear level.
AC power outlet.
Select the display language on the
screen
B
Note It is important to connect the DVD system
directly to your TV.
Connect the radio antennas
Keep the antennas away from the electronic devices to
prevent unwanted interference.
B
A Press SETUP.
The setup menu appears. Use WXTS keys on the
remote control to navigate in the menu.
Connect the audio from other
device to DVD system (optional)
Use the red and white audio cables to connect the
AUX IN (R/L) jackts on this DVD system to the AUDIO
output jacks on your Audio/Video device (for example,
DVD recorder, VCR).
E
B Highlight
icon and press T. Move to
in the
menu and press X.
B
C
AUDIO
OUT
DVD System (rear)
A
AUDIO OUT
C Move to { MENU LANG } in the menu and press X.
D Use TS keys to select a language option in the
b
A Connect the FM antenna to the FM jack. Extend the
DVD System
(rear)
menu and press OK to confirm.
wire and fix its end to the wall.
E Press SETUP to exit.
B Unfold the AM loop antenna and fix the claw into
Note The language set here is only for the menus
that are shown on the TV while operating this DVD
system, not for the DVD disc menu.
the slot.
C Connect the AM loop antenna to the AM jack. Place
the AM loop antenna on a shelf, or attach it to a
stand or wall.
Note Press TV/AUX/DI on the remote control to
get the sound output from the speakers system when
watching the TV program.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this DVD system.
Refer to the user manual for more information.
|