KUBIK 1.5 SL111A1
Page 1 of 4
Bare Lamp Flush Unit
Dimensions
1-1/2"
(38mm)
46-3/16"
(1173mm)
2.5"
(64mm)
Channel Cover
Ballast Channel
Lampholder Housing
Multi-Function Block
1"
(25mm)
Plug Insert
Ordering guide (complete luminaire consist of unit & power feed)
Unit/Louver Cat. No.
SL111A128PIU
SL111A128PIH
SL111A154PIU
SL111A154PIH
SL111A154MZ1
SL111A154MZ2
SL111A154PCU
Lamp (linear)
Volts
120/277V
347V
Ballast Type
Finish
1 -28W T 5
Programmed Rapid Start
120/277V
347V
Brushed and Anodized Aluminum
1-54W T5 HO
120V
Dimming Mark 10
277V
120/277V
Dimming PowerSpec HDF
Suspended Mount: Single stem or aircraft cable with round canopy suitable
for mounting on a standard outlet box for plaster ceiling, exposed installation
or suspended ceilings mounts. Stem and cable mounts can both be used on
the same luminaire.
Patterns: Suitable for different patterns in continuous row mounting.
Wall Mount: Can be wall mounted vertically or horizontally.
Features
Flush Unit: 2-1/2" (64mm) overall height, meets ADA requirements.
Ballast Channel: 0.05' (1.3mm) min. thick, 1-1/2' x 1-1/2' (38mm x 38mm) brushed
and anodized extruded aluminum ballast channel. Provided with knock-outs and
threaded holes to accept all mounting accessories.
Channel Cover: 0.04' (1mm) thick brushed and anodized aluminum ballast cover.
Press-fit installation. No visible hardware.
Multi-Function Block (2): Solid brushed and anodized aluminum finish. Retains
lampholder housing to the ballast channel. Also functions as a wireway for
continuous rows and patterns.
Lampholder Housing (2): 0.08' (2mm) min. thick, 1' (25mm) square brushed and
anodized aluminum with turret style locking socket.
Plug Insert (2): 0.56" (14mm) dia. 0.31" (8mm) min. deep Solid brushed and anodized
aluminum finish. Hide the holes at each end of ballast channel when luminaire is not
row mounted.
Electrical
Ballast: Electronic slim profile 1 lamp 28W T5 or 54W T5H0 linear ballast.
U: Universal voltage ballast automatically detects 120V to 277V, 50 or 60Hz
operations.
1: 120V ballast only.
2: 277V ballast only.
H: 347V ballast only.
Lampholder: G5 plug-in base, miniature Bi-pin.
Finish
Options and Accessories
Natural brushed and anodized aluminum. All painted parts are powder coat
paint process.
Emergency Lighting: Electronic Bodine slim profile battery pack The emergency
ballast senses the power failure and immediately switches to emergency mode
by illuminating the lamp at a reduced lumen output for a minimum of 90 mins.
The battery fully recharges within 24 hours. Add suffix (EM) to the catalogue
numbers.
Job Information
Type:
DALI Interface: Digital Addressable Lighting Interface available upon request
for individual luminaires. Ballast 120 volts or 277 volts only. Consult your
Lightolier representative.
Job Name:
Cat. No.:
Markings
Lamp(s):
Notes:
cULus Listed. Suitable for damp locations.
Mounting
Direct Mount: Square canopies or invisible feed suitable for plaster ceiling, exposed
ceiling or suspended ceilings mounts.
Lightolier
Canlyte
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A1.pdf
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
Lightolier is a Philips group brand
KUBIK 1.5 SL111A1
Page 3 of 4
Bare Lamp Flush Unit
Cat. No.
Finish
Power Feed Cable Kit
SL003NLG
SL003NWH
Textured Light Grey
White
Mounts to a 3" (76mm) or 4" (102mm) octogonal outlet box.
Kit includes one 0.024" (0.6mm) thick, 5" (127mm) round steel
canopy, one 0.05" (1.3mm) thick grounded crossbar threaded
stud, one 0.046" (1.2mm), 96" (2438mm) long aircraft galvanized
cable with zinc plated hanger adjusting glider hardware,
two white plastic cable stay and one 18 AWG (AWM), 10 feet
(3048mm) long white cord, 10 Amps max.
Cat. No.
Finish
Cable Mounting Kit (non-electrical)
SL004NLG
SL004NWH
Textured Light Grey
White
Mounts to a 3" (76mm) or 4" (10mm) octagonal outlet box.
Kit includes one 0.024" (0.6mm) thick, 5" (127mm) round steel
canopy, one 0.05" (1 3mm) thick grounded crossbar, threaded
stud, one 0.046" (1.2mm), 96' (2438mm) long galvanized
aircraft galvanized cable with zinc plated hanger and
adjusting glider hardware. Can be used with either Cable
or Stem Power Feed Kit.
Cat. No.
Finish
Extension Blank (4')
SL003P4
Brushed Aluminum
Permits power feed between two 1.5" x 1.5" (38mm x 38mm)
brushed and anodized units in a straight run with supplied
extra wires 18 AWG, 10 Amps max, and wire connectors
to energize them. Includes one 46-3/16" (1173mm) long
extruded aluminum channel and cover, two solid aluminum
multi-function blocks as a wireway, plug inserts and wire
connectors.
46-3/16"
(1173 mm)
Cat. No.
Finish
Invisible Coupler
SL003Q
Zinc plated
Invisible coupler for joining two Kubik 1.5 units together
mechanically or/and electrically. Recommended for direct
surface mounting. Comes with 4 wires 18 AWG, 10 Amps max.
Cat. No.
Finish
5 Face Connector
Kubik 1.5
1.5"
(38 mm)
SL003R
Brushed Aluminum
Kubik 1.5 units coupled with exclusive solid brushed and
anodized aluminum 5-face connectors and power feed can
satisfy virtually any layout requirement. The connector permits
you to create square, rectangular, continuous rows, L, T,
X configurations. Includes four threaded couples, plug insert
(3), four wires 18 AWG and wire connectors, 10 Amps max.
Job Information
Type:
Lightolier
Canlyte
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A1.pdf
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
Lightolier is a Philips group brand
KUBIK 1.5 SL111A1
Page 4 of 4
Bare Lamp Flush Unit
Performance
CANDLEPOWER CURVE
180°
CANDLEPOWER
COEFFICIENTS OF UTILIZATION
ZONE
DEG
ZONAL CAVITY METHOD * EFFECTIVE FLOOR CAVITY REFLECTANCE = .20
80
70
50
ALONG 22.5
45
326
67.5
ACROSS
Wall Reflectance
70 50 30 10 70 50 30 10 50 30 10
0
5
15
25
35
45
55
65
75
326
339
323
300
261
215
162
111
59
22
15
16
15
13
16
16
17
13
16
16
9
326
330
325
309
285
251
209
165
125
96
88
94
115
147
136
95
326
331
341
347
337
320
302
289
279
268
251
269
269
275
281
281
256
146
28
326
322
339
345
343
329
318
308
303
292
270
295
294
295
294
296
277
164
41
331
335
331
318
296
262
234
217
198
191
197
206
220
238
247
165
78
0
1
2
3
4
5
6
7
8
9
1.09 1.09 1.09 1.09 1.02 1.02 1.02 1.02 .88 .88 .88
.97 .91 .86 .82 .90 .85 .81 .76 .73 .70 .67
.87 .78 .71 .64 .81 .73 .66 .60 .62 .57 .53
.79 .68 .59 .53 .73 .63 .56 .50 .55 .49 .44
.72 .60 .51 .44 .66 .56 .48 .41 .48 .41 .36
.65 .52 .43 .36 .60 .49 .41 .34 .42 .35 .30
.60 .47 .38 .31 .55 .43 .35 .29 .37 .31 .26
.55 .42 .33 .27 .51 .39 .31 .25 .34 .27 .22
.51 .37 .29 .23 .47 .35 .27 .22 .30 .24 .19
.47 .34 .25 .20 .43 .31 .24 .19 .27 .21 .17
90°
85
90
95
105
115
125
135
145
155
165
175
180
10 .43 .31 .23 .17 .40 .28 .21 .16 .25 .19 .15
DETERMINED IN ACCORDANCE WITH CURRENT IES PUBLISHED PROCEDURES
LUMINAIRE INPUT WATTS = 26.4
0°
44
14
14
11
DISTRIBUTION
15
9
9
9
1
9
1
9
REPORT NO: C9932
CAT. NO: SL111A128PI
1 x 28W T5 at 2610 Lumens
Efficiency: 99.9 %
Candela at Nadir: 326cd
ZONE
0-30
0-40
0-60
0-90
40-90
60-90
90-180
0-180
LUMENS
277
% LAMP
10.62
18.07
35.18
59.33
41.25
24.15
40.62
99.95
% LUMINAIRE
10.63
471
918
1548
1076
630
1060
2608
18.08
35.20
59.36
41.28
24.16
40.64
100.00
Patterns
SL003P4
SL003Q
SL111A1
SL003K
SL111A1
SL003Q
SL111A1
SL111A1
SL111A1
SL003R
SL003K
SL003R
SL003J
SL111A1
SL111A1
SL111A1
SL111A1
SL111A1
SL004N
SL111A1
SL003N
SL004N
SL003R
SL111A1
SL003R
SL003L
SL111A1
SL003R
SL111A1
SL004N
SL003R
SL111A1
SL003R
SL003J
SL111A1
SL111A1
SL003M
SL004M
SL003J
SL111A1
Job Information
Type:
SL003J
Lightolier
Canlyte
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Philips Group • SL111A1.pdf
3015 Louis-Amos, Lachine, Québec H8T 1C4 • (514) 636-0670 • (514) 636-0460
Lightolier is a Philips group brand
|