For product support, visit
Para obtener asistencia técnica, visite
Pour en savoir plus sur l’assistance sur les produits, visitez le site
HTL2151
User manual
1 Manuel d'utilisation
15
29
Manual del usuario
EN: For further assistance, call the customer support service in your country.
• To obtain assistance in the U.S.A., Canada, Puerto Rico, or the U.S. Virgin Islands, contact
Philips Customer Care Center at 1-866-310-0744
• To obtain assistance in Mexico, contact Philips Customer Care Center at 01 800 839 1989
ES: Para obtener mas informacion, llame al servicio de soporte al cliente de su pais.
• Para obtener asistencia en los Estados Unidos, en Canada, Puerto Rico o en las Islas Virgenes de los Estados
Unidos, comuniquese con Centro de atencion al cliente de Philips al 1-866-310-0744
• Solo para Mexico CENTRO DE ATENCION A CLIENTES LADA, 01 800 839 1989 Solo Para Mexico.
FR: Pour obtenir de l’aide supplementaire, communiquez avec le centre de service a la clientele de votre pays.
• Pour obtenir de l’aide aux Etats-Unis, au Canada, a Puerto Rico ou aux lles Vierges americaines, communiquez
avec le centre de service a la clientele Philips au : 1-866-310-0744
• Pour obtenir l’aide au Mexique, entrez en contact avec le centre de soin de client de Philips a 01 800 839 1989
For Product recycling information, please visit - www.recycle.philips.com
Para obtener información del reciclaje de productos, por favor visite - www.recycle.philips.com
Para obtener información de productos de reciclaje, por favor visite - www.recycle.philips.com
P&F USA, Inc.
•
•
Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
1 Important
Read and understand all instructions before you
use your product. If damage is caused by failure
to follow instructions, the warranty does not
apply.
Do not defeat the safety purpose of
the polarized or grounding-type plug.A
polarized plug has two blades with one
wider than the other.A grounding type
plug has two blades and a third grounding
prong.The wide blade or the third prong
are provided for your safety. If the provided
plug does not fit into your outlet, consult
an electrician for replacement of the
obsolete outlet.
Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories
specified by the manufacturer.
Help and support
Philips provides extensive online support.Visit
•
•
•
download the user manual and the quick
start guide
watch video tutorials (available only for
selected models)
find answers to frequently answered
questions (FAQs)
•
•
•
•
email us a question
chat with our support representative.
Follow the instructions on the website to select
your language, and then enter your product
model number.
Alternatively, you can contact Philips Consumer
Care in your country. Before you contact
Philips, note down the model number and
serial number of your product.You can find this
information on the back or bottom of your
product.
•
Use only with the cart, stand, tripod,
bracket or table specified by the
manufacturer or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
•
•
Unplug this apparatus during lightning
storm or when unused for long periods of
time.
Important safety instructions
•
•
•
•
•
•
•
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer’s instructions.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
2
EN
•
Battery usage CAUTION -To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
•
•
Where the MAINS plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
•
•
•
•
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
The batteries shall not be exposed to
excessive heat such as sunshine, fire or
the like.
Do not place this apparatus on the
furniture that is capable of being tilted by a
child and an adult leaning, pulling, standing
or climbing on it.A falling apparatus can
cause serious injury or even death.
This apparatus should not be placed in a
built-in installation such as a bookcase or
rack unless proper ventilation is provided.
Make sure to leave a space of 7.8 inches
(20cm) or more around this apparatus.
•
•
Perchlorate Material - special handling
hazardouswaste/perchlorate.
Class II equipment symbol
•
The product/remote control may contain
a coin/button type battery, which can be
swallowed. Keep the battery out of reach
of children at all times! If swallowed, the
battery can cause serious injury or death.
Severe internal burns can occur within two
hours of ingestion.
This symbol indicates that the unit has a double
insulation system.
•
•
If you suspect that a battery has been
swallowed or placed inside any part of the
body, seek immediate medical attention.
When you change the batteries, always
keep all new and used batteries out of
reach of children. Ensure that the battery
compartment is completely secure after
you replace the battery.
This ‘bolt of lightning’ indicates uninsulated material
within your unit may cause an electrical shock. For
the safety of everyone in your household, please
do not remove product covering.
•
If the battery compartment cannot be
completely secured, discontinue use of the
product. Keep out of reach of children and
contact the manufacturer.
•
•
Apparatus shall not be exposed to
dripping or splashing.
Do not place any sources of danger on
the apparatus (for example. liquid filled
objects, lighted candles).
This apparatus may contain lead and
mercury. Dispose according to local, State
or Federal laws. For disposal or recycling
information, please contact your local
authorities. For additional assistance on
recycling options, please contact www.
The ‘exclamation point’ calls attention to
features for which you should read the enclosed
literature closely to prevent operating and
maintenance problems.
WARNING:To reduce the risk of fire or
electric shock, this apparatus should not be
exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed
on this apparatus.
•
EN
3
CAUTION:To prevent electric shock, match
wide blade of plug to wide slot, fully insert.
2 Your SoundBar
Congratulations on your purchase, and
welcome to Philips!To fully benefit from
the support that Philips offers, register your
Care for your product
Use only microfiber cloth to clean the product.
Care of the environment
Assemble your Soundbar
Assemble your SoundBar as described in the
quick start guide (Step 1).
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused. Please
information on a recycling center in your area.
Main unit
This section includes an overview of the main
unit.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products and batteries.
The correct disposal of these products helps
prevent potentially negative consequences on
the environment and human health.
a
b
c
The batteries supplied do not contain the heavy
metals mercury and cadmium. Nevertheless,
in many areas batteries may not be disposed
of with your household waste. Please ensure
you dispose of batteries according to local
regulations.
For perchlorate material, special handling may
perchlorate.
d
e
f
a
Switch SoundBar on to last Source Mode
or Standby Off Mode.
b VOLUME +/-
Increase or decrease volume.
c SOURCE
Select an audio source for the SoundBar.
d Power
Lights up when you connect the SoundBar
to electric mains.
4
EN
e Source indicators
a
(Standby-On)
Switch the SoundBar On or to standby Off.
•
COAX/OPT/AUX: Lights up when
you switch to coaxial, optical or analog
audio input source.
USB: Lights up when you switch to the
USB source.
AUDIO-IN: Lights up when you switch
to the audio input source.
b AUX
Switch your audio source to the AUX
•
•
connection.
c AUDIO-IN
Switch your audio source to audio input
connection (3.5mm jack).
f SURR
Lights up when you selectVirtual Surround
d +/-
Increase or decrease volume.
sound.
e USB
Remote control
Switch your audio source to the USB
connection.
This section includes an overview of the
remote control.
f SURR
Toggle between stereo and virtual
surround sound.
a
g BASS +/- / RESET
•
•
Increase or decrease bass.
Reset your bass level to default setting
mode.
b
c
h TREBLE +/- / RESET
•
Increase or decrease treble.
k
j
i
•
Reset your treble level to the default
settings programmed at the factory.
i OPT
Switch your audio source to Optical Mode.
d
j
Mute or restore volume.
e
f
k COAX
Switch your audio source to Coxial Mode.
Connectors
This section includes an overview of the
connectors available on your SoundBar.
g
h
EN
5
Top connectors
3 Connect
This section helps you connect your SoundBar
to aTV and other devices.
For information about the basic connections of
your SoundBar and accessories, see the quick
start guide.
a
b
a
(USB)
Audio input from a USB storage device.
Note
• For identification and supply ratings, refer to the type
plate at the back or bottom of the product.
• Before you make or change any connections, make sure
that all devices are disconnected from the power outlet.
b AUDIO-IN
Audio input from an MP3 player (3.5mm
jack).
Rear connectors
Placement
Place the subwoofer at least 1 meter (3 feet)
away from your SoundBar, and ten centimeters
away from the wall.
For best results, place your subwoofer as shown
below.
d
e
a b
c
a AUDIO IN
Connect to an analog audio output on the
TV or an analog device.
b DIGITAL IN-COAXIAL
Connect to a coaxial audio output on the
TV or a digital device.
c DIGITAL IN-OPTICAL
Connect to an optical audio output on the
TV or a digital device.
d SUBWOOFER
Connect to the supplied subwoofer.
e AC MAINS~
Connect to the power supply.
6
EN
Option 2: Connect audio through a
digital coaxial cable
Connect audio fromTV and
other devices
Good quality audio
Play audio fromTV or other devices through
your Soundbar.
Use the best quality connection available on
yourTV and other devices.
Option 1: Connect audio through a
digital optical cable
Best quality audio
1 Using a coaxial cable, connect the
COAXIAL connector on your SoundBar
to the COAXIAL/DIGITAL OUT
TV
connector on theTV or other device.
•
The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
1 Using an optical cable, connect the
OPTICAL connector on your SoundBar to
the OPTICAL OUT connector on theTV
or other device.
Option 3: Connect audio through
analog audio cables
Basic quality audio
•
The digital optical connector might be
labeled SPDIF or SPDIF OUT.
1 Using an analog cable, connect the AUX
connectors on your SoundBar to the
AUDIO OUT connectors on theTV or
other device.
DVD
EN
7
Equalizer
4 Use your
SoundBar
Change the high frequency (treble) and low
frequency (bass) settings of the SoundBar.
1 Press TREBLE +/- or BASS +/- to change
the frequency.
This section helps you use the SoundBar to play
audio from connected devices.
•
Press RESET to reset your treble/bass
level to the default setting mode.
» All Source indicators on the main unit
blink twice when treble or bass is set
to the maximum or minimum value.
Before you start
•
Make the necessary connections described
in the Quick Start Guide or download
support.
•
Switch the SoundBar to the correct source
for other devices.
MP3 player
Connect your MP3 player to play your audio
files or music.
Adjust the volume
What you need
•
•
An MP3 player.
A 3.5mm stereo audio cable.
1 Press +/- to increase or decrease a volume
level.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO-IN
connector on your SoundBar.
•
•
To mute sound, press (MUTE).
To restore the sound, press (MUTE)
again or press +/-.
2 Press AUDIO-IN.
» All Source indicators on the main unit
blink twice when a volume is set to the
maximum or minimum value.
3 Press the buttons on the MP3 player to
select and play audio files or music.
USB storage devices
Choose your sound
Enjoy audio on a USB storage device, such as an
MP3 player and USB flash memory, etc.
This section helps you choose the ideal sound
for your video or music.
What you need
Surround sound mode
•
A USB storage device that is formatted
for FAT file systems, and complies with the
Mass Storage Class.
An MP3 or WMA file on a USB storage
device
Experience an immersive audio experience with
surround sound modes.
•
1 Press SURR to select a surround mode.
•
[Virtual Surround]: Creates a highly
surround listening experienceThe
SURR indicator on the main unit lights
up.
1 Connect a USB storage device to the
SoundBar.
2 Press USB on the remote control.
» The play starts after a few seconds.
•
[Stereo]:Two-channel stereo sound.
Ideal for listening to music.
8
EN
Note
5 Wall mount
• This product may not be compatible with certain types
of USB storage device.
• If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
• Digital camera PTP protocols are not supported.
• Do not remove the USB storage device while it is
being read.
• DRM-protected music files (MP3,WMA) are not
supported.
• Support a USB port: 5V , 500mA.
Note
• Koninklijke Philips Electronics N.V. bears no
responsibility for improper wall mounting that results
in accident, injury or damage. If you have any query,
contact Philips Consumer Care in your country.
• Before wall mounting, make sure the wall can support
the weight of your SoundBar.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
Auto standby
When playing media from a connected device,
the SoundBar automatically switches to standby
if:
•
•
no button is pressed for 15 minutes, and
no audio play from a connected device.
3 - 3.5mm
Apply factory settings
> 25mm
You can reset your SoundBar to the default
setting mode.
For information about how to wall mount your
SoundBar, see the quick start guide.
1 In mute mode, quickly press AUX twice.
» The factory settings is restored.
EN
9
Amplifier
6 Product
specifications
•
FTC total output power: 34W
•
Left + Right : 16W (1%THD, 4ohm,
150Hz-20kHz)
•
Subwoofer: 15W (1%THD, 8ohm,
40Hz-150Hz)
•
•
•
•
RMS total output power: 40W RMS (+/-
0.5 dB, 10%THD)
Frequency response:
20 Hz-20 kHz / ±3 dB
Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
Input sensitivity:
Note
• Specifications and design are subject to change without
notice.
Audio
•
•
AUX: 2V
AUDIO-IN: 1V
•
S/PDIF Digital audio input:
•
•
Coaxial: IEC 60958-3
Optical:TOSLINK
Subwoofer
Main unit
•
•
•
•
Impedance: 8 ohm
Speaker drivers: 130 mm (5.25") woofer
Frequency response: 20 Hz-150 Hz
Dimensions (WxHxD):
165 x 240 x 295 mm
Weight: 2.6 kg
Cable length: 3 m
•
Power supply: 110-240V~, 50 Hz - 60 Hz
•
•
•
Power consumption: 30 W
Standby power consumption: ≤ 0.5 W
Speaker impedance:
•
•
8 ohm (Tweeter), 4 ohm (Woofer)
Frequency response: 160 Hz-20 kHz
Dimensions (WxHxD):
•
•
800 x 75.6 x 52.4 mm
Weight: 3.84 kg
Remote control batteries
•
•
1 x AAA-R03-1.5V
USB
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
(MSC)
•
•
•
File system: FAT16 and FAT32
Supports MP3 and WMA file formats
Sampling frequency:
•
MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz,
22 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz
•
WMA: 44.1 kHz, 48 kHz
•
•
Constant bit rate:
•
•
MP3: 8 kbps-320 kbps
WMA: 32 kbps-192 kbps
Version:
WMA:V7,V8,V9
•
10 EN
7 Troubleshooting 8 Notice
This section contains the legal and trademark
notices.
Warning
• Risk of electric shock. Never remove the casing of the
product.
Notice of compliance
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at www.
philips.com/support.
This set complies with the FCC rules, Part
15. Operation is subject to the following two
conditions:
a This device may not cause harmful
interference, and
b This device must accept any interference
received, including interference that may
cause undesired operation.
Main unit
The buttons on the SoundBar do not work.
FCC rules
•
Disconnect the SoundBar from the power
supply for a few minutes, then reconnect.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation.This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance
with the instruction manual, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures:
Sound
No sound from SoundBar speakers.
•
Connect the audio cable from your
SoundBar to yourTV or other devices.
Reset your SoundBar to its factory settings.
On the remote control, select the correct
audio input.
•
•
•
Make sure that the SoundBar is not muted.
Distorted sound or echo.
•
If you play audio from theTV through the
SoundBar, make sure that theTV is muted.
•
•
Relocate the receiving antenna.
Increase the separation between
equipment and receiver.
•
•
Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced
radio/TV technician for help.
EN 11
FCC Radiation Exposure Statement:This
equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment.This equipment should be installed
and operated with a minimum distance of
20cm between the radiator and your body.
This transmitter must not be co-located or
operated in conjunction with any other antenna
or transmitter.
Warning: Changes or modifications made to
this equipment not expressly approved by
Philips may void the FCC authorization to
operate this equipment.
Model number: PHILIPS HTL2151
Trade Name: Philips
Responsible Party:P&F USA, Inc. PO Box 2248
Alpharetta, GA 30023-2248; 1-866-310-0744
Trademarks
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
12 EN
ONE (1) YEAR LIMITED WARRANTY
WARRANTY COVERAGE:
This warranty obligation is limited to the terms set forth
below.
or (d) if any serial number has been removed or defaced,
or (e) product, accessories or consumables sold “AS IS”
without warranty of any kind by including refurbished Philips
product sold “AS IS” by some retailers.
WHO IS COVERED:
This product is warranted to the original purchaser or the per-
son receiving the product as a gift against defects in materials and
workmanship as based on the date of original purchase
(“Warranty Period”) from an Authorized Dealer. The original
sales receipt showing the product name and the purchase date
from an authorized retailer is considered such proof.
This Limited Warranty does not cover:
•
•
Shipping charges to return defective product.
Labor charges for installation or setup of the product, adjust-
ment of customer controls on the product, and installation or
repair of antenna/signal source systems outside of the product.
Product repair and/or part replacement because of improper
installation or maintenance, connections to improper voltage
supply, power line surge, lightning damage, retained images or
screen markings resulting from viewing fixed stationary con-
tent for extended periods, product cosmetic appearance items
due to normal wear and tear, unauthorized repair or other
cause not within the control of the company.
•
WHAT IS COVERED:
This warranty covers new products if a defect in material
or workmanship occurs and a valid claim is received within
the Warranty Period. At its option, the company will either (1)
repair the product at no charge, using new or refurbished
replacement parts, or (2) exchange the product with a product
that is new or which has been manufactured from new, or ser-
viceable used parts and is at least functionally equivalent or most
comparable to the original product in current inventory,
or (3) refund the original purchase price of the product.
The company warrants replacement products or parts provided
under this warranty against defects in materials and workmanship
from the date of the replacement or repair for ninety (90) days
or for the remaining portion of the original product’s warranty,
whichever provides longer coverage for you. When a product or
part is exchanged, any replacement item becomes your property
and the replaced item becomes the company property. When a
refund is given, your product becomes the company property.
Note: Any product sold and identified as refurbished or
renewed carries a ninety (90) day limited warranty.
•
•
•
Damage or claims for products not being available for use, or
for lost data or lost software.
Damage from mishandled shipments or transit accidents when
returning product.
A product that requires modification or adaptation to enable
it to operate in any country other than the country for which
it was designed, manufactured, approved and/or authorized, or
repair of products damaged by these modifications.
A product used for commercial or institutional purposes
(including but not limited to rental purposes).
•
•
•
Product lost in shipment and no signature verification receipt
can be provided.
Failure to operate per Owner’s Manual.
TO OBTAIN ASSISTANCE IN THE U.S.A., CANADA,
PUERTO RICO, OR U.S. VIRGIN ISLANDS…
Contact Customer Care Center at:
Replacement product can only be sent if all warranty
requirements are met. Failure to follow all requirements
can result in delay.
1-866-310-0744
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-
SUMER. PHILIPS SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY ON THIS PROD-
UCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-
TATIONS:
This Limited Warranty applies only to the new products that
can be identified by the trademark, trade name, or logo affixed
to it. This Limited Warranty does not apply to any non-Philips
hardware product or any software, even if packaged or sold
with the product. Non-Philips manufacturers, suppliers, or
publishers may provide a separate warranty for their own
products packaged with the bundled product.
The company is not liable for any damage to or loss of any ,
programs data, or other information stored on any media
contained within the product, or any non-Philips product or part
not covered by this warranty. Recovery or reinstallation of
programs, data or other information is not covered under this
Limited Warranty.
Some states do not allow the exclusions or limitation of inciden-
tal or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you.
This warranty does not apply (a) to damage caused by accident,
abuse, misuse, neglect, misapplication, or non-Philips product, (b)
to damage caused by service performed by anyone other than
an Authorized Service Location, (c) to a product or
a part that has been modified without written permission,
This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province.
P&F USA Inc. PO Box 2248 Alpharetta, GA 30023-2248
P&F USA, Inc.
PO Box 2248 Alpharetta, GA 30023-2248
Barra de Sonido
HTL2151/F7
30 W
6.94 Wh
0.412 Wh
120V~, 60Hz
Consumo de Energía Eléctrica
Consumo de Energía Eléctrica del aparato en Modo de Espera
Comercializado por :
IMPORTADOR:
P&F MEXICANA. S.A. DE C.V.
P&F MEXICANA. S.A. DE C.V.
Av. La Palma #6.
Col. San Fernando La Herradura
Huixquilucan, Edo. México.
MEXICO C.P.52787.
Tel: 52 (55) 5269 - 9000
EXPORTADOR:
P&F USA Inc.
CHINA
HECHO EN:
GARANTIA INCLUIDA EN EL INSTRUCTIVO DE USO
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO
ANTES DE USAR SU APARATO.
Specifications are subject to change without notice
© 2013 Koninklijke Philips Electronics N.V.
All rights reserved.
HTL2151_F7_UM_V1.0
|