DISCRETE SEMICONDUCTORS
DATA SHEET
handbook, halfpage
BGY1916
UHF amplifier module
Product specification
2000 Oct 17
Supersedes data of 1998 May 27
Philips Semiconductors
Product specification
UHF amplifier module
BGY1916
CHARACTERISTICS
Tmb = 25 °C; VS1 = 5 V; VS2 = 26 V; PL = 16 W; ZS = ZL = 50 Ω unless otherwise specified.
SYMBOL
PARAMETER
frequency
CONDITIONS
MIN.
1930
TYP.
MAX.
UNIT
MHz
f
−
1990
−
−
−
28
IS1
supply current
supply current
load power
−
−
16
24
30
−
−
−
−
80
430
−
mA
mA
W
IS2
PD < −60 dBm
PD < 63 mW
PL
Gp
power gain
−
−
−
−
−
−
dB
η
H2
efficiency
−
%
second harmonic
third harmonic
input VSWR
stability
−35
−45
1.6 : 1
−60
dBc
dBc
H3
VSWRin
VSWR ≤ 2 : 1 through all phases;
PL ≤ 16 W; VS2 = 25 to 27 V
carrier = 16 W; Preverse = −40 dBc;
fi = fc ±200 kHz
corner frequency = 3 dB;
carrier = 16 W; modulation = 20%
dBc
dBc
MHz
reverse intermodulation
AM bandwidth
P
−
−
−
−53
B
2
−
P
ruggedness
VSWR ≤ 5 : 1 through all phases
no degradation
MGD187
MGD186
30
60
30
handbook, halfpage
handbook, halfpage
G
p
η
(%)
G
p
P
L
(dB)
20
(W)
20
40
η
10
20
10
0
0
0
30
0
0
10
20
40
80
P
120
P
(W)
(mW)
IN
L
f = 1960 MHz; VS1 = 5 V; VS2 = 26 V; ZS = ZL = 50 Ω; Tmb = 25 °C.
f = 1960 MHz; VS1 = 5 V; VS2 = 26 V; ZS = ZL = 50 Ω; Tmb = 25 °C.
Fig.2 Power gain and efficiency as functions of
load power; typical values.
Fig.3 Load power as a function of input power;
typical values.
2000 Oct 17
3
Philips Semiconductors
Product specification
UHF amplifier module
BGY1916
APPLICATION INFORMATION
C7
C5
C8
C6
Z
Z
2
R1
L1
R2
L2
1
C3
C1
C4
C2
50 Ω
V
V
50 Ω
output
S1
S2
input
MGM861
Fig.4 Test circuit.
List of components (see Figs 4 and 5)
COMPONENT
DESCRIPTION
electrolytic capacitor
VALUE
CATALOGUE NO.
C1, C2
C3, C4
C5, C6
C7, C8
L1, L2
R1, R2
Z1, Z2
10 µF; 35 V
10 nF; 50 V
100 pF; 50 V
10 pF; 50 V
multilayer ceramic chip capacitor
multilayer ceramic chip capacitor
multilayer ceramic chip capacitor
Grade 4S2 Ferroxcube bead
metal film resistor
4330 030 36300
2322 195 13109
10 Ω; 0.4 W
stripline: note 1
50 Ω
Note
1. The striplines are on a double copper-clad printed-circuit board (RO5880) with εr = 2.2 and thickness = 0.79 mm.
2000 Oct 17
4
Philips Semiconductors
Product specification
UHF amplifier module
BGY1916
90
42
C7
C5
C8
C6
R1
L1 L2
R2
C3
C1
C4
C2
Z
Z
1
2
MGM862
output V
V
input
S2
S1
Dimensions in mm.
Fig.5 Printed-circuit board component layout.
5
2000 Oct 17
Philips Semiconductors
Product specification
UHF amplifier module
BGY1916
MOUNTING RECOMMENDATIONS
The module should be mounted to the heatsink using
3 mm bolts with flat washers. The bolts should first be
tightened to “finger tight” and then further tightened in
alternating steps to a maximum torque of 0.4 to 0.6 Nm.
To ensure a good thermal contact and to prevent
mechanical stress when bolted down, the flatness of the
mounting base is designed to be typically better than
0.1 mm. The mounting area of the heatsink should be flat
and free from burrs and loose particles. The heatsink
should be rigid and not prone to bowing under thermal
cycling conditions. The thickness of a solid heatsink
should be not less than 5 mm to ensure a rigid assembly.
Once the module is mounted on the heatsink, the leads
can be soldered to the printed-circuit board. A soldering
iron may be used up to a temperature of 250 °C for a
maximum of 10 seconds at a distance of 2 mm from the
plastic cap.
A thin, even layer of thermal compound should be applied
between the mounting base and the heatsink to achieve
the best possible thermal contact resistance. Excessive
use of thermal compound will result in an increase in
thermal resistance and possible bowing of the mounting
base; too little will also result in poor thermal conduction.
Precautions must be taken to protect the device from
electrostatic damage (ESD).
2000 Oct 17
6
Philips Semiconductors
Product specification
UHF amplifier module
BGY1916
PACKAGE OUTLINE
Plastic rectangular single-ended flat package; flange mounted; 2 mounting holes; 4 in-line leads
SOT365A
D
A
F
y
U
q
A
U
2
p
U
1
E
L
1
2
3
4
b
p
w
M
v
c
A
e
e
e
Z
Q
1
0
10
20 mm
scale
DIMENSIONS (mm are the original dimensions)
UNIT
A
b
c
D
E
e
e
F
L
p
Q
q
U
U
U
v
w
y
Z
p
1
1
2
9.5 0.56
9.0 0.46
4.0
3.8
0.3 30.1 18.6
0.2 29.9 18.4
3.25 6.5
3.15 6.1
4.1
3.9
40.74 48.0 15.4 7.75
40.54 48.4 15.2 7.55
12.8
12.6
mm
2.54 17.78
0.3 0.25 0.1
REFERENCES
JEDEC
EUROPEAN
PROJECTION
OUTLINE
VERSION
ISSUE DATE
IEC
EIAJ
SOT365A
99-02-06
2000 Oct 17
7
Philips Semiconductors
Product specification
UHF amplifier module
BGY1916
DATA SHEET STATUS
PRODUCT
STATUS
DATA SHEET STATUS
DEFINITIONS (1)
Objective specification
Development This data sheet contains the design target or goal specifications for
product development. Specification may change in any manner without
notice.
Preliminary specification Qualification
This data sheet contains preliminary data, and supplementary data will be
published at a later date. Philips Semiconductors reserves the right to
make changes at any time without notice in order to improve design and
supply the best possible product.
Product specification
Production
This data sheet contains final specifications. Philips Semiconductors
reserves the right to make changes at any time without notice in order to
improve design and supply the best possible product.
Note
1. Please consult the most recently issued data sheet before initiating or completing a design.
DEFINITIONS
DISCLAIMERS
Short-form specification
The data in a short-form
Life support applications
These products are not
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductors customers using or selling these products
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
at these or at any other conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Right to make changes
Philips Semiconductors
reserves the right to make changes, without notice, in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
the use of any of these products, conveys no licence or title
under any patent, copyright, or mask work right to these
products, and makes no representations or warranties that
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
Application information
Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
no representation or warranty that such applications will be
suitable for the specified use without further testing or
modification.
2000 Oct 17
8
Philips Semiconductors
Product specification
UHF amplifier module
BGY1916
NOTES
2000 Oct 17
9
Philips Semiconductors
Product specification
UHF amplifier module
BGY1916
NOTES
2000 Oct 17
10
Philips Semiconductors
Product specification
UHF amplifier module
BGY1916
NOTES
2000 Oct 17
11
Philips Semiconductors – a worldwide company
Argentina: see South America
Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB,
Tel. +31 40 27 82785, Fax. +31 40 27 88399
Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140,
Tel. +61 2 9704 8141, Fax. +61 2 9704 8139
New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND,
Tel. +64 9 849 4160, Fax. +64 9 849 7811
Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213,
Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210
Norway: Box 1, Manglerud 0612, OSLO,
Tel. +47 22 74 8000, Fax. +47 22 74 8341
Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6,
220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773
Pakistan: see Singapore
Belgium: see The Netherlands
Philippines: Philips Semiconductors Philippines Inc.,
106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI,
Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474
Brazil: see South America
Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor,
51 James Bourchier Blvd., 1407 SOFIA,
Tel. +359 2 68 9211, Fax. +359 2 68 9102
Poland: Al.Jerozolimskie 195 B, 02-222 WARSAW,
Tel. +48 22 5710 000, Fax. +48 22 5710 001
Portugal: see Spain
Canada: PHILIPS SEMICONDUCTORS/COMPONENTS,
Tel. +1 800 234 7381, Fax. +1 800 943 0087
Romania: see Italy
China/Hong Kong: 501 Hong Kong Industrial Technology Centre,
72 Tat Chee Avenue, Kowloon Tong, HONG KONG,
Tel. +852 2319 7888, Fax. +852 2319 7700
Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW,
Tel. +7 095 755 6918, Fax. +7 095 755 6919
Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762,
Colombia: see South America
Tel. +65 350 2538, Fax. +65 251 6500
Czech Republic: see Austria
Slovakia: see Austria
Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V,
Slovenia: see Italy
Tel. +45 33 29 3333, Fax. +45 33 29 3905
South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale,
2092 JOHANNESBURG, P.O. Box 58088 Newville 2114,
Tel. +27 11 471 5401, Fax. +27 11 471 5398
Finland: Sinikalliontie 3, FIN-02630 ESPOO,
Tel. +358 9 615 800, Fax. +358 9 6158 0920
France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex,
Tel. +33 1 4099 6161, Fax. +33 1 4099 6427
South America: Al. Vicente Pinzon, 173, 6th floor,
04547-130 SÃO PAULO, SP, Brazil,
Tel. +55 11 821 2333, Fax. +55 11 821 2382
Germany: Hammerbrookstraße 69, D-20097 HAMBURG,
Tel. +49 40 2353 60, Fax. +49 40 2353 6300
Spain: Balmes 22, 08007 BARCELONA,
Tel. +34 93 301 6312, Fax. +34 93 301 4107
Hungary: see Austria
Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM,
Tel. +46 8 5985 2000, Fax. +46 8 5985 2745
India: Philips INDIA Ltd, Band Box Building, 2nd floor,
254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025,
Tel. +91 22 493 8541, Fax. +91 22 493 0966
Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH,
Tel. +41 1 488 2741 Fax. +41 1 488 3263
Indonesia: PT Philips Development Corporation, Semiconductors Division,
Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510,
Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080
Taiwan: Philips Semiconductors, 5F, No. 96, Chien Kuo N. Rd., Sec. 1,
TAIPEI, Taiwan Tel. +886 2 2134 2451, Fax. +886 2 2134 2874
Ireland: Newstead, Clonskeagh, DUBLIN 14,
Tel. +353 1 7640 000, Fax. +353 1 7640 200
Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd.,
60/14 MOO 11, Bangna Trad Road KM. 3, Bagna, BANGKOK 10260,
Tel. +66 2 361 7910, Fax. +66 2 398 3447
Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053,
TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007
Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye,
ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813
Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI),
Tel. +39 039 203 6838, Fax +39 039 203 6800
Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7,
252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461
Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku,
TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057
United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes,
MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421
Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL,
Tel. +82 2 709 1412, Fax. +82 2 709 1415
United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409,
Tel. +1 800 234 7381, Fax. +1 800 943 0087
Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR,
Tel. +60 3 750 5214, Fax. +60 3 757 4880
Uruguay: see South America
Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905,
Vietnam: see Singapore
Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087
Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD,
Middle East: see Italy
Tel. +381 11 3341 299, Fax.+381 11 3342 553
For all other countries apply to: Philips Semiconductors,
Marketing Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN,
The Netherlands, Fax. +31 40 27 24825
Internet: http://www.semiconductors.philips.com
70
SCA
© Philips Electronics N.V. 2000
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
613524/05/pp12
Date of release: 2000 Oct 17
Document order number: 9397 750 07589
|