HC Series Emergency Lighting HC
Page 1 of 2
Explosion Proof Power Packs
The HC Series is ideal for use in hazardous locations where explosive materials may be present. The HC Series is UL listed for use in Class I, Division 1, Groups C
& D; Class II, Division 1, Groups E, F & G areas.
Complete Fixture consists of power pack unit. Order lighting fixtures separately. Select options below.
How to Specify:
HC
SERIES
VOLTAGE/BATTERY
HC = Hazardous Location
Emergency Lighting Unit
6V, Nickel Cadmium
14N = 14W Power Pack, Compact Fluorescent
Lamp Operation, AC and Emergency Operation
1
28N = 28W Power Pack, Incandescent Lamp Operation,
Emergency Operation Only
6V, Pure Lead
85P = 85W Power Pack, Incandescent Lamp Operation,
Emergency Operation Only
12V, Nickel Cadmium
50N = 50W Power Pack, Incandescent Lamp Operation,
Emergency Operation Only
NOTE:
1) Compatible only with F Series Fixtures using
7W compact fluorescent lamps. Will not operate
incandescent lamps. Maximum remote mounting
distance from the HC14N is 8 feet.
Accessories
Features
OB3 = 3-way explosion proof 3/4” conduit hub
SEA = Swivel elbow arm for use with pendant mount fixture to connect to
OB3 or HC unit
1. Illumination: Illumination is accomplished with incandescent or compact
fluorescent F Series Fixtures. (See F Series Spec Sheet.)
2. Housing: Copper-free cast aluminum enclosure designed to withstand the
pressure of explosions generated by internal arc without propagating them
into the hazardous atmosphere.
EVLA12 = 12 Volt, 12 Watt Halogen Directional Head
9.0”
4.6”
EVLA12
(22.86 cm)
(11.68 cm)
3. Electronics: 120/277 VAC dual voltage input with surge-protected, solid-
state circuitry. HC85P uses a temperature compensating charger. Charging
system is complete with low voltage disconnect, AC lockout, brownout pro-
tection, AC indicator lamp and test switch.
4. Battery: Maintenance free, sealed nickel cadmium battery has an estimat-
ed service life of 10 years, and an operating temperature range of 20°F (-7°C)
to 95°F (35°C). HC85P uses a pure lead battery.
9.0”
(22.86 cm)
5. Input Power Requirements: 120 VAC - 0.50 amps, 60 watts
277 VAC - 0.22 amps, 60 watts
Code Compliance
Job Information
Type:
UL 924, 844, 1203 and 1604 listed.
Job Name:
Cat. No.:
Options
T1 = 120 VAC Time Delay
T2 = 277 VAC Time Delay
DC = DC Power Switch
Lamp(s):
Notes:
ST = Special Input Transformer (Specify voltage & frequency)
KL = Key Lock
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
Lightolier is a Philips group brand
|