Pioneer DVD Player DVD 116 User Manual

DVD-116  
Industrial DVD-ROM  
OP E R AT I N G IN S T R U C T I O N S  
Version 1.00  
March 15, 2001  
Pioneer Corporation  
Pioneer New Media Technologies, Inc.  
 
IMPORTANT  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy. If not installed and  
used in accordance with the instructions, it may cause harmful interference to radio  
communications; there are no guarantees that interference will not occur in a particular  
installation. If this drive does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is encouraged to  
try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna  
Increase the separation between the equipment and receiver  
Connect the equipment into an outlet on a circuit which is different from the  
receiver’s circuit  
Consult the dealer or an experienced radio/TV technician for help  
 
Table of Contents  
1.0 General Information ........................................................................................................ 2  
2.0 Safety Instructions .......................................................................................................... 3  
2.1 Drive Precautions.................................................................................................... 3  
2.2 Disc Precautions ..................................................................................................... 4  
3.0 Features ........................................................................................................................... 4  
3.1 Specific Features..................................................................................................... 4  
3.2 Precautions With CD-RW/DVD-RW Discs............................................................... 5  
3.3 Precautions When Playing 8cm (3.15) Discs.......................................................... 5  
4.0 Interface ........................................................................................................................... 5  
4.1 Front View and Vertical installation.......................................................................... 6  
4.2 Back View and Ports ............................................................................................... 6  
4.3 Region Code Information......................................................................................... 7  
5.0 Installation ....................................................................................................................... 8  
5.1 Positioning the Drive ............................................................................................... 8  
5.2 Connections ............................................................................................................ 8  
6.0 Specifications.................................................................................................................. 9  
6.1 General Functions................................................................................................... 9  
6.2 Specific Functions ................................................................................................... 9  
- i -  
 
DVD-116 Operating Instructions  
1.0  
GENERAL INFORMATION  
Thank you for buying this Pioneer DVD-ROM drive. Please read through these  
operating instructions to understand your unit properly. After you have finished reading  
the instructions, put them away in a safe place for future reference.  
WARNING: To prevent fire or shock hazard, do not expose drive to rain or moisture.  
CAUTION: This product contains a laser diode of higher class than 1. To ensure  
continued safety, do not remove any covers of attempt to gain access to the inside of the  
product. Refer all servicing to qualified personnel. For pluggable equipment, install near  
a wall outlet for easy access. The drive is labeled as a Class 1 Laser Product on the  
top of the cover.  
Do not remove the cover. Alterations or modifications carried out without appropriate  
authorization may invalidate the warranty.  
This product complies with the EMC Directives (89/336/EEC,92/31/EEC) and CE  
Marking Directive (93/68/EEC).  
The Generation of Acoustical Noise is less then 70dB (ISO7779/DIN45635).  
(For Canadian model: This Class B digital apparatus complies with Canadian ICES-003.)  
Play only round discs rather than unique shapes such as a heart or diamond.  
AFTER SALES SERVICE FOR PIONEER PRODUCTS:  
Contact your dealer or distributor for after-sales and warranty service. Please provide  
any necessary warranty documents or other pertinent information. If the documents are  
unavailable, please contact the Pioneer regional service headquarters listed below.  
Please do NOT ship any products to these non-repair center addresses  
AMERICA  
Pioneer Electronics Service, Inc.  
Customer Support Division  
P.O. box 1760  
Long Beach, CA 90801-1760  
EUROPE  
Pioneer Electronics (Europe) N V  
European Service Division  
Haven 1087, Keetbeglaan 1, 19120 Melsele, Belgium  
- 2 -  
 
DVD-116 Operating Instructions  
ASIAN  
Pioneer Electronics Asiacentre PTE Ltd.  
Service Department  
253 Alexandra Road, #04-01  
Singapore 159936  
JAPAN & OTHERS  
Pioneer Corporation (Head Office)  
Customer Support Center  
4-1, Meguro 1-Chrome, Meguro-KU, Tokyo 153-8654 Japan  
2.0  
SAFETY INSTRUCTIONS  
To ensure your personal safety and to maximize the full operating potential of your drive,  
read and follow the precautions listed below.  
2.1  
Drive Precautions  
This section discusses installation concerns and drive maintenance.  
Environment Avoid installing this drive in a location with exposure to large  
quantities of dust, high temperatures, high humidity, and subject to excessive  
vibrations or shocks.  
Power Turn OFF the system before installing this or any other hardware  
device.  
Read & Retain Instructions Read all operating and user information provided  
with this drive.  
Cleaning Use a damp cloth to clean the exterior housing. Avoid using any  
fluids including liquid, aerosol or alcohol-based cleaning products.  
Water or Moisture avoid operating or locating this drive near water or other  
sources of fluid.  
Power Sources Operate this drive only from the recommended power  
sources. If you are unsure of the power source, consult an authorized Pioneer  
representative.  
Overloading Avoid connecting too many devices to a single wall socket or  
power source as this can cause fires or short circuits.  
Object & Liquid Entry Never push objects  
Condensation Moisture can form in the operating section of the product if the  
drive is taken from cool surroundings to a room with a warmer temperature. Let  
the drive stand for one to two hours in the new location before turning it ON.  
- 3 -  
 
DVD-116 Operating Instructions  
Servicing Opening or removing the cover exposes you to possible electrical  
shock or other danger. Contact a Pioneer authorized service representative for  
repairing this drive (refer to the enclosed Service & Support Card).  
2.2  
Disc Precautions  
Cracked or warped discs may damage the drive. If a disc breaks inside of the  
unit, pieces are likely to strike the optics.  
Non-standard disc shapes are unusable on this drive. These shapes include  
hearts, diamonds, polygons, etc.  
3.0  
FEATURES  
The Pioneer DVD-116 drive support many current and upcoming formats.  
3.1  
Specific Features  
High-Speed Reading / transfer rate (sustained):  
DVD-ROM maximum 21,600 kBytes/sec.  
CD-ROM maximum 6,000 kBytes/sec.  
Note: The data transfer rate may fail to be output if the disc is scratched or damaged in  
any way.  
High Speed Access / random average:  
DVD-ROM 95 ms  
CD-ROM 80 ms  
ATAPI correspondence  
Buffer size: 256 kBytes  
Applicable discs:  
* DVD-ROM (DVD-5, DVD-9)  
* CD-ROM Mode 1  
* CD-DA  
* CD Extra  
* DVD-V  
* Video CD  
* DVD-R  
* CD-RW/DVD-RW disc reading  
* CD-Text support  
* CD-ROM XA Mode 2 (Form 1, 2) * CD-R  
Note: Please read the following section entitled Precautions with CD-RW/DVD-RW discs  
- 4 -  
 
DVD-116 Operating Instructions  
Correspondence with Kodak Photo CD multi-sessions  
Conforming to MPC-3 specifications  
Half-height size  
Power tray loading  
Microsoft® Windows® 9X and Windows® 200 (Plug & Play) supported  
3.2  
Precautions With CD-RW/DVD-RW Discs  
This drive is able to read out CD-RW/DVD-RW disc data. The following items  
may affect speed or compatibility.  
The drive requires an additional short period of time to sense a CD-  
RW/DVD-RW disc at startup when compared with a CD/DVD-ROM.  
Since a CD-RW/DVD-RW signal level is lower than a replicated CD/DVD  
disc, reading speeds are slower.  
Blank discs, discs without data, and discs without a complete closing  
process are invalid.  
The drive may fail under the following conditions:  
* dirty or scratched discs  
* heavily rewritten discs  
3.3  
Precautions When Playing 8cm (3.15”) Discs  
Although some drives provide or accept tray adapters to play an 8cm (3.15)  
disc, the DVD-116 plays 12cm discs only when installed vertically.  
4.0  
INTERFACE  
Before connecting the drive, decide whether the unit will be installed horizontally or  
vertically. The next two sections provide information for either position.  
- 5 -  
 
DVD-116 Operating Instructions  
4.1  
Front View and Vertical installation  
DVD-116 Front View  
* Vertical Installation  
1) Disc Tray - Auto-loading using the Eject button  
place a disc on the tray with the label facing up  
A When installing the drive vertically, slide the trays lower claw in before mounting  
a disc.  
2) Phones Headphone jack  
stereo mini-jack for using headphones  
3) Volume Control Headphone Level  
used to adjust the volume for the headphones  
4) Busy indicator  
flashes during data access  
5) Eject button  
press to open and close the tray  
6) Forced Ejection hole  
if the eject button fails to function, insert a stiff rod into the hole and push gently and  
steadily until the disc ejects  
WARNING: Before forcing an ejection, verify that the computer power is OFF and  
that the disc has stopped spinning in the drive. The approximate time, for a disc to  
stop spinning once the power if OFF, is 60 seconds.  
4.2  
Back View and Ports  
DVD-116 Back View  
- 6 -  
 
DVD-116 Operating Instructions  
7) Audio Output  
connector for analog audio output, uses a Modex 70553 connector  
Select the appropriate cable from the following chart:  
Pin  
1
Name Function  
L
Left channel audio output  
2
G
G
R
Ground  
3
Ground  
4
Right channel audio output  
8) Device Configuration Jumper  
set this jumper switch to select the drive use mode supporting the computer  
(jumpered = ON; no jumper = OFF)  
Pin  
1
Name Function  
MA*1  
on Drive set to Master mode  
2
SL  
on Drive set to Slave mode  
on Drive set to Cable Select mode  
Reserved  
3
CS  
4
5
Reserved  
9) Host IDE Interface  
40-pin I/O connector in accordance with ATA specifications  
10) DC Input  
power supply input for DC +5 V and +12 V  
Pin  
1
Name Function  
+12  
G
Power supply input for DC +12 V  
2
Ground  
3
G
Ground  
4
+5  
Power supply input for DC +5 V  
4.3  
Region Code Information  
The maximum number of times the Region Code may be changed is five (5),  
including the initial setting. The fifth change becomes PERMANENT until the unit  
is serviced and the counter is reset to 1.  
Note: Region Codes are part of the DVD Standard, however, Region Codes on DVD  
discs are optional. DVD discs with no specified Region Code may be played on any  
player.  
- 7 -  
 
DVD-116 Operating Instructions  
5.0  
INSTALLATION  
The following information provides step-by-step instructions to install the DVD-116.  
5.1  
Positioning the Drive  
Before beginning the installation, decide if the drive needs to be positioned  
horizontally (standard) or vertically. Review all instructions prior to install the  
DVD-116 drive.  
1. Turn OFF the computer and remove the cover or front panel.  
2. Remove the blank drive-cover from the front panel.  
3. Attach the slide rails to the drive.  
slide rails may be purchased from a computer retailer  
4. Insert the drive in to the open bay/slot.  
5. Place the screws in the appropriate holes and tighten.  
Screws must be shorter than 5mm (3/16) in length, longer screws may  
damage the drive.  
Note: When mounting screws are loose, vibrations from a spinning disc may  
cause a ripping sound.  
5.2  
Connections  
The computer provides power for the drive rather than an external power source.  
Do not use any other power supply for this drive.  
Connect the cables in the following order:  
1. Connect the power cable from the computer.  
pay close attention to the polarity on the cable  
2. Connect the IDE interface cable.  
confirm that Pin 1 on the drive corresponds to Pin 1 on the cable  
3. Connect the drives audio output to the sound card, if applicable  
- 8 -  
 
DVD-116 Operating Instructions  
6.0  
SPECIFICATIONS  
6.1  
General Functions  
12 cm (4.72) 8 cm (3.15) *  
Disc Diameter  
* 8 cm discs are unusable when the drive is mounted vertically  
Transfer Rate  
(sustained)  
DVD-ROM  
CD-ROM  
Maximum 21,600 kBytes/sec *  
Maximum 6,000 kBytes/sec *  
* data transfer rate may not be output if disc is damaged or dirty  
Access Time  
(Random Average)  
DVD-ROM  
CD-ROM  
95 ms  
80 ms  
Data Butter Capacity  
256 kBytes  
6.2  
Specific Functions  
Audio Output Line  
0.7 Vrms ± 0.1 Vrms (at 10 kload)  
Power Supply  
DC + 12 V, 1.8 A (peak) 1.3 A (normal)  
CD + 5 V, 1.2 A (peak) 0.8 A (normal)  
External Dimensions  
(includes front panel)  
5 27/32(W) x 1 11/16(H) x 8 7/32(D)  
148mm (W) x 42.3mm (H) x 208.5mm (D)  
Weight  
2.2 lbs (1.0 kg)  
Temperature Range  
Humidity Range  
41° F to 113° F (+5° C to +45° C)  
5% to 85%  
Storage Temperature - 40° F to 140° F (- 40° C to +60° C)  
Storage Humidity 5% to 90% (no condensation)  
Note: Specifications and design changes subject to possible modification without notice due to  
improvements.  
- 9 -  
 
DVD-116 Operating Instructions  
DVD-116  
Industrial DVD-ROM Drive  
Pioneer Electronic Corporation  
4-1, Meguro 1-chome  
Meguro-ku, Tokyo 153  
JAPAN  
Pioneer New Media Technologies, Inc.  
2265 East 220th Street  
Long Beach, California 90810  
United States of America  
(310) 952-2111  
- 10 -  
 

Peavey Musical Instrument Amplifier KB2 KB3 User Manual
Philips Bottle Warmer SCF215 86 User Manual
Philips Cassette Player XP AQ 6581 User Manual
Philips Electric Shaver 6756 X User Manual
Philips Flat Panel Television PF 9965 12S User Manual
Philips Home Theater Screen BDL4677XL User Manual
Philips Portable Speaker SBA230 User Manual
Pioneer Car Speaker FH P8000BT User Manual
Pioneer Computer Drive DVR 108 User Manual
Progressive Turf Equipment Lawn Mower SDR65 User Manual