DIGITAL HOME TERMINAL
BD-V1000 Series
Operating Instructions
IMPORTANT SAFEGUARDS
POLARIZATION – This unit's power cord has a
polarized plug (one blade is wider than the
other). This plug will fit into the power outlet
only one way. This is a safety feature. If you
are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
READ INSTRUCTIONS
operating instructions should be read before
the appliance is operated.
RETAIN INSTRUCTIONS
operating instructions should be retained
for future reference.
–
All the safety and
SERVICING – Do not attem pt to service this
appliance yourself as opening or rem oving
cove rs m a y e xpose you to da nge rous
voltage or other hazards. Refer all servicing
to your cable com pany.
REPLACEMENT PARTS – When replacem ent
parts are required, be sure the service
technician has used replacem ent parts
specified by the m anufacturer or have the
sam e characteristics as the original part.
Unauthorized substitutions m ay result in
fire, electric shock or other hazards.
SAFETY CHECK – Upon com pletion of any
service or repairs to this appliance, ask the
service technician to perform safety checks
to determ ine that the appliance is in proper
operating condition.
–
The safety and
HEED WARNINGS
–
All warnings on the
appliance and in the operating instructions
should be adhered to.
FOLLOW INSTRUCTIONS – All operating and
usage instructions should be followed.
POWER-CORD PROTECTION
–
Power-supply
cords should be routed so that they are not
likely to be walked on or pinched by item s
placed upon or against them . Pay particular
attention to cords at plugs, convenience
receptacles, and the point where they exit
from the appliance.
CLEANING
–
Do not use liquid cleaners or
aerosol cleaners. Use
soft dry cloth.
ATTACHMENTS – Do not use attachm ents not
recom m ended by appliance m anufacturer
as they m ay cause hazards.
a
polishing cloth or
OUTDOOR ANTENNA GROUNDING
–
If a n
outside antenna or cable system is connected
to the video product, be sure the antenna or
cable system is grounded so as to provide
som e protection against voltage surges and
built-up static charges. Section 810 of the
Na tio n a l Ele ctrica l Co d e , ANS I/NFPA 70,
provides inform ation with respect to proper
g ro u n d in g o f th e m a s t a n d s u p p o rtin g
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding
conductors, location of antenna-discharge
unit, connection to grounding electrodes, and
requirem ents for the grounding electrode. See
Figure A.
LIGHTNING – For added protection for the unit
during a lightning storm , unplug it from the
wall outlet and disconnect the cable system
in p u t. Th is w ill p re ve n t d a m a g e d u e to
lightning and power-line surges.
OVERLOADING – Do not overload wall outlets
and extension cords as this can result in a risk
of fire or electric shock.
WATER AND MOISTURE
–
Do not use this
DAMAGE REQUIRING SERVICE – Unplug this
appliance from the wall outlet and call your
ca b le co m p a n y u n d e r th e fo llo w in g
conditions:
appliance near water – for exam ple, near a
bathtub, wash bowl, kitchen sink, or laundry
tub, in a wet basem ent, or near a swim m ing
pool, etc.
÷
÷
÷
÷
When the power-supply cord or plug is
dam aged.
If liquid has been spilled, or objects have
fallen into the appliance.
If the appliance has been exposed to rain or
water.
If the appliance does not operate norm ally
by following the operating instructions.
Adjust only those controls that are covered
by the operating instructions. Im proper
adjustm ent of other controls m ay result in
dam age and will often require extensive
work by a qualified technician to restore
the appliance to its norm al operation.
If the appliance has been dropped or the
cabinet has been dam aged.
ACCESSORIES – Do not place this appliance on
an unstable cart, stand, tripod, bracket, or
table. The appliance m ay fall, causing serious
injury to a child or adult, and serious dam age
to the appliance. Use only with a cart, stand,
tripod, bracket, or table recom m ended by
the m anufacturer, or sold with the appliance.
Any m ounting of the appliance should follow
the m anufacturer's instructions, and should
use a m ounting accessory recom m ended by
the m anufacturer.
CART
–
An appliance and cart com bination
should be m oved with care. Quick stops,
excessive force, and uneven surfaces m ay
cause the appliance and cart com bination to
overturn.
÷
÷
When the appliance exhibits
a
distinct
change in perform ance – this indicates
need for service.
a
OBJ ECTANDLIQUIDENTRY–Never push objects
o f a n y kin d in to th is a p p lia n ce th ro u g h
openings as they m ay touch dangerous voltage
points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the appliance.
NEC – NATIONAL ELECTRICAL CODE
VENTILATION
–
Slots and openings in the
cabinet are provided for ventilation to ensure
reliable operation of the appliance and to
protect it from overheating. These openings
m ust not be blocked or covered. They should
never be blocked by placing the appliance
on a bed, sofa, rug, or other sim ilar surface.
This appliance should never be placed near
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
or over
a
radiator or heat register. This
ANTENNA
appliance should not be placed in a built-in
installation such as a bookcase or rack unless
p ro p e r ve n tila tio n is p ro vid e d o r th e
m a n u fa ctu re r's in s tru ctio n s h a ve b e e n
adhered to.
POWER SOURCES – The appliance should be
operated only on the voltage indicated on
the product label. If you are not sure of the
type of power supply to your hom e, consult
yo u r a p p lia n ce d e a le r o r lo ca l p o w e r
com pany.
DISCHARGE UNIT
(NEC SECTION 810 – 20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810 – 21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
FIG. A
NOTE TO CATV SYSTEM INSTALLER:
This reminder is to call the CATV system installer’s attention to Article 820-40 of the NEC that pr
guidelines for proper grounding and, in particular, specifications that the cable grounding shall be co
to the grounding system of the building, as close to the point of cable entry as practical.
3
<BRB1050>
ABOUT THIS MANUAL
INTRODUCTION
Ca b le TV b rin g s
entertainm ent to the cable viewer. To enjoy that
program m ing, your television m ust first be set up
to receive the cable signal.
FOCUS OF THIS MANUAL
a
w id e a rra y o f h o m e
Much of how your BD-V1000 Voyager Hom e
Term inal operates is determ ined by your cable TV
service provider. Those operating instructions
m ay be found in a separate m anual. The purpose
of this guide is to assist you with connecting the
Voyager Hom e Term inal to a TV and/or VCR and
learning about its front- and rear-panel item s.
BD-V1000 DIAGRAM
CAUTION:
Tam pering with the Hom e Term inal or trying to force open the cover causes the Hom e Term inal to
stop functioning autom atically.
FRONT PANEL
Remote sensor window
MESSAGE light
Channel number/time display
Power ON
indicator light
BYPASS light
MESSAGE
BYPASS
CH
SELECT
–
VOL
+
VOL
POWER
CH
SELECT key
Power button
CLEAR/multi-purpose key
Channel and volume control/
cursor movement keys
SmartCard slot
REAR PANEL
CABLE IN input connector
TO TV output connector
AC power outlet
AC power inlet
UL caution label
BD-V1000
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
* * * * * * *
Tested To Comply
With FCC Standards
AC OUTLET
400W MAX
FOR HOME OR OFFICE USE
THIS DEVICE IS INTENDED TO BE ATTACHED TO A
RECEIVER THAT IS NOT USED TO RECEIVE OVER-THE-AIR
BROADCAST SIGNALS. CONNECTION OF THIS DEVICE
IN ANY OTHER FASHION MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS AND IS IN
VIOLATION OF THE FCC RULES, PART 15.
* * * * * * * * *
CATV CONVERTER
MODEL BD-V1000
120 VAC
60 Hz
120V AC 60 Hz 26
W
PIONEER ELECTRONIC CORP.
MADE IN JAPAN
L
CABLE IN
AC INLET
TO TV
R
LISTED
295T
DIGITAL
AUDIO
ETHERNET
S-VIDEO
OUT
VIDEO
OUT
AUDIO
OUT
U
SERIAL
PORT
USB
® L
Baseband audio output connectors
Baseband video output connector
Baseband S-video output connector
Digital audio output connector
USB connector
Serial port connector
Ethernet connector
4
<BRB1050>
FEATURE IDENTIFICATION
FRONT PANEL
BYPASS LIGHT
REAR PANEL
AC POWER INLET
Lights when the optional RF Bypass Adapter
m odule is switched to bypass m ode. When in
bypass m ode, the Adapter sends cable signals
directly to the TV.
CHANNEL AND VOLUME CONTROL/
CURSOR MOVEMENT KEYS
These keys have different functions, depending
on what is displayed on the TV screen. During
norm al TV viewing, the 5/∇ (up/down) arrows
change the channel by stepping up or down one
channel at a tim e. The 2/3 (left/right) arrows
adjust the sound level up or down.
When a m enu is displayed, these sam e keys
m ove the cursor up or down, left or right.
CHANNEL NUMBER/ TIME DISPLAY
Shows channel num ber or current tim e. Also
shows “rEC” when recording is taking place.
CLEAR/ MULTI-PURPOSE KEY
Connects to an unswitched 120-volt AC outlet,
using the detachable power cord (included).
AC POWER OUTLET
Provides AC power to the connected TV.
CAUTION:
Connect only the TV AC power cord to this
outlet.
This outlet allows 400 watts m axim um power
consum ption. To prevent the risk of fire or
dam age to the Hom e Term inal, do not connect
any kind of equipm ent of m ore than 400 watts
power use, or any other equipm ent (toaster,
hair dryer, etc.).
BASEBAND AUDIO OUTPUT CONNECTORS
Connects to the stereo (L and R) audio inputs of
a VCR, audio am plifier, or TV. Requires audio
cables with m ale phono (RCA) plugs (not
included).
When a m enu is displayed, returns you to norm al
TV viewing. May also have special functions as
described in the on-screen display.
MESSAGE LIGHT
Blinks when the BD-V1000 receives a m essage
for you from the cable com pany, or an E-m ail
m essage from another person.
BASEBAND S-VIDEO OUTPUT CONNECTOR
Connects to the S-video input of a TV or VCR.
Requires special S-video cable (not included). If
your TV or VCR doesn’t have a sim ilar S-video
ja ck, u s e th e s ta n d a rd b a s e b a n d vid e o
connection instead.
BASEBAND VIDEO OUTPUT CONNECTOR
Connects to the standard baseband video input
of a VCR or TV. Requires video cables with m ale
phono (RCA) plugs (not included).
POWER BUTTON
Turns on the BD-V1000 and lights the Power-On
indicator Light when pressed, or turns all off
when pressed again. May also control the AC
Power Outlet, depending on the BD-V1000’s
se ttings. (Re fe r to the se pa ra te ope ra ting
instruction m anual.)
CABLE IN INPUT CONNECTOR
Co n n e cts to th e in co m in g ca b le s e rvice .
Requires 75-ohm coaxial cable with m ale “F”-
type connectors (not included).
POWER ON INDICATOR LIGHT
Lights to show the BD-V1000 is turned on.
REMOTE SENSOR WINDOW
Receives signals from the rem ote control.
IMPORTANT:
DIGITAL AUDIO OUTPUT CONNECTOR
Connects to the digital audio input on your
ste re o a m plifie r, re ce ive r or digita l a udio
decoder.
ETHERNET CONNECTOR
Do not block this window.
SELECT KEY
Selects the desired action highlighted on the
screen.
Connects to a 10Base-TLAN service, ifavailable.
Requires Category 5 Ethernet cable with RJ 45
plugs (not included).
SERIAL PORT CONNECTOR
SMARTCARD SLOT
Connects to the optional VCR Com m ander. The
VCR Co m m a n d e r co n tro ls re co rd in g o f
program s on your VCR through the BD-V1000
program guide.
Accepts a special card provided by your cable
com pany. This card is not always needed for
BD-V1000 operation, unless required by the
cable com pany.
TO TV OUTPUT CONNECTOR
Co nn e cts to th e TV’s VHF a nte n n a inp u t.
Requires 75-ohm coaxial cable with m ale “F”-
type connectors.
USB CONNECTOR
Co n n e cts to US B (Un ive rs a l S e ria l Bu s )-
equipped options such as a wireless keyboard
infrared receiver.
5
<BRB1050>
CONNECTIONS
Th e s e a re s o m e s u g g e s te d b a s ic h o o k-u p
diagram s for the BD-V1000, both with and without
a VCR.
BD-V1000 CONNECTIONS
Sim ple Connection.
This is the sim plest connection, but does not
provide stereo sound on analog channels.
BD-V1000 Hom e Term inal
CATV
Service
L
CABLE IN
TO TV
R
ETHERNET SERIAL
PORT
S-VIDEO VIDEO AUDIO
DIGITAL
AUDIO
USB
Detachable AC
power cord
(included)
75-ohm VHF
ANTENNA IN
Unswitched
AC outlet
TV Set
Stereo Connection.
Provides stereo sound on all channels carrying
stereo signals. Tune your TV to watch the A/V or
Audio/Video input.
BD-V1000 Hom e Term inal
CATV
Service
L
CABLE IN
TV
R
ETHERNET SERIAL
PORT
S-VIDEO VIDEO AUDIO
DIGITAL
AUDIO
USB
OUT
OUT
OUT
Detachable AC
power cord
(included)
Note:
Use either standard base-
band video ports, or S-Video
ports if your TV and/or VCR
are so equipped.
INPUTS
Unswitched
AC outlet
R
L
S-VIDEO VIDEO
AUDIO
TV Set
VCR Connection.
Provides stereo hookup to TV through VCR. Select
the A/V or Audio/Video input on both your TV and
VCR.
BD-V1000 Hom e Term inal
CATV
Service
L
CABLE IN
TV
R
ETHERNET SERIAL
PORT
S-VIDEO VIDEO AUDIO
DIGITAL
AUDIO
USB
OUT
OUT
OUT
Detachable AC
power cord
(included)
VCR
IN
S-VIDEO VIDEO
OUT
IN
AUDIO
OUT
Unswitched
AC outlet
R
L
IN
Note:
Use either standard base-
band video ports, or S-Video
ports if your TV and/or VCR
are so equipped.
R
R
L
INPUTS
S-VIDEO VIDEO
AUDIO
TV Set
6
<BRB1050>
CABLE TV RECEPTION
NOTE:
CONNECTION PROCEDURES
When disconnecting the BD-V1000, follow these
steps in reverse order. Be sure to unplug the BD-
V1000’s power cord first.
Connect your equipm ent as shown in the figures
on page 6. Use the first table if you are only
connecting the BD-V1000 to a TV.
STEP
ACTION
SETTING UP THE TV
Connect cable service to BD-V1000
CABLE IN (input connector).
Follow the steps in the table to set up your TV for
1
cable.
¶ If TV has video and stereo audio
STEP
ACTION
inputs:
¶ If yo u u s e d th e S im p le
Follow the Stereo Connection
diagram on page 6. Connect BD-
V1000 L/R AUDIO OUT and VIDEO
OUT to the corresponding IN jacks
on the TV, using shielded RCA
(phono) jumper cables.
If TV VIDEO IN is a 4-pin S-Video
jack, connect BD-V1000 S-VIDEO
OUT to TV S-VIDEO IN using a
special S-Video jum per cable.
Le a ve BD-V1000 VIDEO OUT
unconnected.
Co n n e c t io n m ethod:
Tune TV to channel 3 or 4.
Other docum entation that cam e
with your BD-V1000 m ay explain
how to switch the BD-V1000
output channel between 3 and 4.
1
¶ If you used the S t e re o or VCR
Co n n e c t io n m ethod:
2
Select the A/V (Audio/Video)
input setting on your TV.
¶ If TV has no video/audio inputs:
Use your rem ote control’s TV
POWER button to turn the TV on
and off.
Follow the Sim ple Connection
diagram on page 6. Connect BD-
V1000 TO TV (output) connector to
the TV VHF ANTENNA INPUT.
If TV VHF ANTENNA INPUT is a
300-ohm twin-lead (with two
screws), then use a 75 ohm - 300
ohm adapter.
Exception:
TVsets without rem ote controlcan
be turned on through the BD-
V1000. Leave the TV power switch
on. Use the on-screen m enu to
change the BD-V1000’s outlet from
UNSWITCHED to SWITCHED. Use
th e BD-V1000 fro n t p a n e l o r
rem ote control POWER button to
turn the TV on and off.
2
Plug TV AC cord into BD-V1000 AC
outlet.
3
4
Plug BD-V1000 AC cord into an AC
outletthatis notcontrolled bya switch.
TURNING OFF THE BD-V1000
If you have a VCR, follow the procedure below to
connect it between the BD-V1000 and the TV:
To turn off the BD-V1000 hom e term inal, press the
CBL POWER button on the rem ote control, or the
POWER button on the BD-V1000.
STEP
ACTION
Fo llo w th e VC R C o n n e c t io n
diagram on page 6. Connect cable
service to BD-V1000 CABLE IN
(input connector).
You can use your rem ote’s TV POWER button to
turn TV on/off if you have set up the rem ote with
the correct TV code.
1
Connect BD-V1000 outputs to VCR
inputs using the sam e criteria and
procedures as in step 2 of the table
above for TV connection.
VCR RECORDING
2
The BD-V1000 has an optional VCR Com m ander
that lets you autom atically record program s.
Please refer to the separate VCR Com m ander
m anual for installation instructions.
Connect the VCR outputs to the TV
in p u ts , a g a in u s in g th e s a m e
criteria and procedures.
3
4
Connect TV AC cord to BD-V1000
AC outlet.
Connect VCR and BD-V1000 AC
cords to AC outlets that are not
controlled by a switch.
5
7
<BRB1050>
TROUBLESHOOTING
NO TV PICTURE?
LIGHTNING PROTECTION CIRCUIT
The BD-V1000 features a lightning protection
circuit. During a lightning storm , this circuit m ay
activate to protect the rest of the circuit from
dam age. If this occurs, the term inal will appear to
not workat all. To restore operation, sim ply unplug
the unit’s AC power cord for at least one m inute,
and plug it in again.
Use the checklist in the table if you followed all the
instructions but still do not see a picture on your
television.
ACTION
CHECK
STEP
Is cable service connected to
1
BD-V1000
connector?
CABLE
IN
Is a cable connected between
BD-V1000 TO TV connector
and TV input connector; or
between BD-V1000 VIDEO and
L/R AUDIO output connectors
and TV VIDEO and L/R AUDIO
input connectors?
2
Is th e BD-V1000 AC co rd
plugged in to an unswitched
AC outlet?
3
4
Are both BD-V1000 and TV
turned on?
Is your TV tuned to the correct
channel (3 or 4), or set to
display the A/V (audio/video)
input? If no picture on one
channel, try the other.
5
6
Ha s th e re b e e n
a
re ce n t
lightning storm ? If so, reset
yo u r BD-V1000. (S e e th e
“Lightning Protection Circuit”
section.)
TRADEMARKS AND COPYRIGHTS
DOLBY DIGITAL
Pow erKEY
Ma n u fa ctu re d u n d e r lice n s e fro m Do lb y
Laboratories. “Dolby”, “AC-3” and the double-D
sym bol are tradem arks of Dolby Laboratories.
Confidential and Unpublished Works, ©1992 —
1997 Dolby Laboratories, Inc. All rights reserved.
PowerKEY is a registered tradem ark, and the
PowerKEY design is a tradem ark, of Scientific-
Atlanta, Inc.
Published by Pioneer Electronic Corporation.
Copyright © 1998 Pioneer Electronic Corporation.
All rights reserved.
PIONEER ELECTRONIC CORPORATION
Industrial and Business Products Merchandising Division: 4-1, Meguro 1-Chom e, Meguro-ku, Tokyo 153-8654, J apan
PIONEER DIGITAL TECHNOLOGIES, INC.
Broadband Applications Division: 2210 West Olive Avenue, 2nd Floor, Burbank, CA 91506, U.S.A. TEL: 818-295-6650
PIONEER NEW MEDIA TECHNOLOGIES, INC.
Cable and Broadcast System s Division: 2265 East 220th Street, Long Beach, CA 90810, U.S.A. TEL: 310-952-2111
PIONEER ELECTRONICS OF CANADA, INC.
Industrial Products Departm ent: 300 Allstate Parkway, Markham , Ontario L3R 0P2, Canada TEL: 905-479-4411
PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 178-184 Boundary Road, Braeside, Victoria 3195, Australia TEL:+61-3-9586-6300
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 501 Orchard Road, #10-00, Lane Crawford Place, Singapore 0923
TEL: +65-735-9011
FAX: +65-735-9022
Printed in J apan <BRB1050-D>
|