Savi® W410/W420
Wireless headset system
User Guide
Contents
1 Package Contents................................................................ 4
2 System Features................................................................... 5
3 Headset Setup...................................................................... 6
Installing the headset battery......................................... 6
Customize your headset................................................ 6
Assembling Base........................................................... 6
4 System Setup....................................................................... 7
Connecting the power supply........................................ 7
Docking and charging the headset................................ 7
Connecting the USB adapter to your PC ...................... 7
Loading software ........................................................... 7
USB adapter indicator light ........................................... 8
5 Using Your Headset System............................................... 10
Powering up the headset............................................... 9
Talk time......................................................................... 9
Muting a headset during a call ...................................... 9
Placing, Answering, Ending Calls with Desk Phone...... 9
Placing the headset in sleep mode.............................. 10
Headset tones.............................................................. 10
Battery life.................................................................... 10
Headset indicator light................................................. 10
Subscribing a headset................................................. 10
Ending subscription..................................................... 10
6 Making Calls With Your Headset and PC ........................ 11
Software installation .................................................... 11
Making calls with your headset and PC ...................... 11
Softphone support......................................................... 1
Auto answer................................................................. 11
Conferencing up to three guest headsets ................... 12
7 Plantronics Control Panel ................................................ 13
Devices tab.................................................................. 13
Applications tab........................................................... 15
Preferences tab............................................................ 16
About tab..................................................................... 16
8 Plantronics Update Manager........................................... 17
9 Troubleshooting and Common Questions....................... 18
Plantronics Savi User Guide
1 Package Contents
Savi W410/W420 USB Adapter and Charger
USB Adapter
Base Power Supply
Carrying Case
Charger Base
Base Stabilizer
Savi WH300/350 Headset
Headset
Plantronics Savi User Guide
4
2 System Features
Savi USB Adapter Features
Indicator Light
Subscription Button
Savi WH300/350 Headset Features
Volume Button
Indicator Light
Call Control Button
Mute Button
Microphone
Headset
Plantronics Savi User Guide
5
3 Headset Setup
2"
50.8mm
3.1 Adjust the Headband
1
2
1 To adjust the headband, lengthen or shorten the band
until it fits comfortably. Position the headset receivers so
that the foam cushions sit comfortably over the center of
your ears.
2 On the WH300, position the stabilizer T-bar above
your ear.
3 For a tighter fit, gently pull the opposite ends of
the headset inward as shown.
1
2
3
front back
Assembling Base
1 Separate the top from the bottom of the charger base.
2 Attach the base stabilizer to the base, then re-attach the
3
top.
NOTE This product has a replaceable battery. Use only
the battery type supplied by Plantronics.
3.2 Adjust the Mouthpiece
1 Carefully bend and shape the boom with both
hands as shown. Avoid bending or twisting the boom
near the microphone or earpiece.
2 Position the click-stop turret and boom so that the
microphone is two finger-widths from the corner
of your mouth.
3 Make sure the front of the microphone faces your
mouth. If necessary, twist the microphone slightly so it’s
in the proper position. Do not use forceful twisting motions
or try to turn the microphone completely around.
Plantronics Savi User Guide
6
4 System Setup
Connecting the USB Adapter to your PC
Connecting the Power Supply
1 Insert the USB adapter into USB Port on PC. The indicator
light on the USB adapter will be solid red to indicate the USB
adapter is powered on and will turn solid green when it finds
the headset.
1 Connect the base power supply into the power jack on
the charger base.
2 Connect the power supply to the outlet. The power
indicator light will be solid green..
NOTE The headset may have to be charged before the
USB adapter can find it.
Docking and Charging the Headset
1 Gently push the headset into the charging cradle.
The charging indicator light on the headset will flash green to
indicate that the headset battery is charging.
2 The USB adapter can be folded as shown.
2 Charge for at least 20 minutes prior to first use. A full
charge takes 3 hours.
CHArgIng TIME
20 min .....................
Minimum charge
before first use
3 hours ...................
Full charge
IMPOrTANT NOTE For best performance it is recommended
that Windows is updated with Service Pack levels listed below:
®
Charging Indicator Light
Power Indicator Light
Microsoft Windows XP Service Pack 3 (SP3) or later
®
Microsoft Windows Vista Service Pack 1 (SP1) or later
Loading software
1 Load the software by visiting plantronics.com/software
and click on the download button.
Plantronics Savi User Guide
7
USB Adapter Indicator Light
USB Adapter Status
USB Indicator Light
Solid green
Headset subscribed, no activity
Headset in talk mode
Flashes green
Headset muted
Flashes red
Incoming call
Flashes red and yellow
Solid red
Headset not subscribed
USB adapter subscription
Flashes green and red
Flashes green and yellow
Flashes yellow
USB adapter conference subscription
On conference call with one or more guest headsets subscribed
Plantronics Savi User Guide
8
5 Using Your Headset System
Powering Up the Headset
If the headset battery is charged and connected to the headset,
the headset is automatically on. The headset does not have an
on/off button.
Indicator Light
Talk Time
With a single full charge, the Savi W410/W420 will provide up to
9 hours of talk time. Talk time will be reduced when operating in
wideband mode and/or if the headset is used consistently at a far
distance from the adapter.
Call Control Button
Muting a Headset During A Call
Short press the dedicated mute button to toggle mute on/off. The
USB adaptor light will flash red when the headset is muted.
For your safety, do not use headset at high volumes for
extended periods of time. Doing so can cause hearing
loss. Always listen at moderate levels. For more information
on headsets and hearing visit:
When mute is activated, you will hear three high tones. When
unmuted, you will hear three low tones.
plantronics.com/healthandsafety.
After the Plantronics software is loaded, the mute tones can be
turned off by going to Start > Programs > Plantronics Control
Panel > Devices > Device Settings > Headset – Mute Tone.
Placing, Answering, and Ending Calls with
Desk Phone
Phones with Handset Lifter or Electronic
Hookswitch
Phones without Handset Lifter or Electronic
Hookswitch
To place a call
1. Short press call control button on headset*
or short press base desk phone talk button
2. Dial number
1. Short press call control button on headset*
or short press base desk phone talk button
2. Remove handset from cradle**
3. Dial number
To answer a call
To end a call
1. Short press call control button on headset
or short press base desk phone talk button
1. Short press call control button on headset or
short press base desk phone talk button
2. Remove handset from cradle**
1. Short press call control button on headset
or short press base desk phone talk button
1. Short press call control button on headset or
short press base desk phone talk button
2. Return handset to cradle**
*Assumes use of supported softphone
**Assumes your default line is set to PC
Plantronics Savi User Guide
9
Placing the Headset in Sleep Mode
Subscribing a Headset
If you won’t be using the headset for a long period of time and
the headset will not be in the charging cradle, you can put the
headset in sleep mode. With the headset idle, press the call
control button for three seconds until you see the headset flash
white twice. To wake the headset, press the call control button
again and you will see two white flashes.
The headset and USB adapter that are supplied together are
already subscribed to each other. However, if you wish to use
a new headset with your existing USB adapter or you need to
restore subscription to your current headset, the units can be
subscribed to each other by the following method:
1 Ensure your headset is charged.
2 Double press the subscription button on the USB
Headset Tones
adapter. The USB adapter will flash red and green.
Out of range warning
3 Press the volume up button on the headset for three
seconds until the headset indicator light turns solid
green.
If you are on a call and go out of the operating range, you will
hear three low tones. You will hear a single mid tone when you are
back in range.
4 When the indicator light on the USB adapter goes solid
green, the headset and the USB adapter are subscribed
to one another.
If you stay out of range, active calls will be suspended. Calls will
be re-established when you walk back into range. If you remain
out of range for more than 5 minutes, the system will drop the
call.
To ensure subscription was successful, press the call control
button: the headset will flash white and the USB adapter will
flash green.
If you are not on a call and go out of the operating range and
press the call control button, you will hear a single tone for the
button press and three low tones for the failure to make a link.
NOTE If the subscription process times out after two minutes or if
the subscription process fails, the USB adapter indicator light will
become solid red for four seconds and then return to its previous
state. If this occurs, try to re-subscribe the headset again.
Low battery warning
If you are on a call, you will hear a repeated single low tone every
15 seconds indicating that the battery is low. You should recharge
the headset immediately.
If you are not on a call and press the call control button, you will
hear three low tones indicating that the battery is low. You should
recharge the headset immediately.
Ending Subscription
If the USB adapter is in subscription mode and you want to stop
the adapter from searching for a headset, press the subscrip-
tion button again. The subscription light will turn solid red for four
seconds and then go to its previous state.
Battery Life*
With Plantronics software installed, a headset icon will appear
in your system tray, displayingbattery status. A warning will be
issued if your headset’s battery is critically low.
100% 75% 50%
25%
0%
Headset Indicator Light
If you are not on a call, you can toggle the headset in-use
indicator light on and off by pressing the headset volume down
button for three seconds.
Plantronics Savi User Guide
10
6 Making Calls With your Headset and PC
Software Installation
It is highly recommended that you install the Plantronics software.
Though your Savi system will operate without the software, it will
limit the system’s full capabilities.
Install the Plantronics software to enable remote call answer/end
with compatible softphones. The software can be downloaded at
plantronics.com/software.
After installation, to visit the Plantronics control panel, click on
Start > Programs > Plantronics > Plantronics Cool Panel.
Plantronics Spokes for Windows software runs on the Intel®
x86 and x64 platform (including compatible CPUs from other
manufacturers) running Windows 8, 7, Vista SP2 and XP SP3
(x86 only) (Basic, Professional and Enterprise Editions).
Making Calls With Your Headset and PC
With Plantronics Software
Without Plantronics Software
and a Compatible Softphone
To place a call
To answer a call
To end a call
Dial number from a compatible softphone application
Short press call control button on headset
Short press call control button on headset
1. Short press call control button on headset
2. Dial number from softphone application
1. Short press call control button on headset
2. Answer call using softphone application
1. Short press call control button on headset
2. Hang up call using softphone application
Softphone Compatibility
Auto Answer
Remote call answer/end from the Savi headset is available for all
softphones with no additional steps by the user except Skype™.
For a list of compatible softphones visit plantronics.com/software.
Auto answer saves the user a button press to establish the radio
link between headset and adapter.
The Savi W410/W420 is supplied with auto answer NOT
SELECTED as the default. When auto answer is set to NOT
SELECTED you must press the headset call control button to
answer an incoming call. When Auto Answer is set to SELECTED
an incoming call will be answered when the headset is removed
from the charge cradle.
For Skype support, please follow these steps:
1 Skype will display the following message during the install of
Plantronics Unified Runtime Engine “PlantronicsURE.exe wants
to use Skype”. Choose “Allow Access” to connect.
2 You can also check Savi W410/W420 Skype connection
status by going to Skype and checking the Tools > Options >
Advanced > Advanced Settings > ”Manage Other Programs
To change the setting, go to: Start > Programs > Plantronics >
Plantronics Control Panel > Device Settings – USB adapter.
Access” setting.
Plantronics Savi User Guide
11
Conferencing Up to Three Guest Headsets
While on a call, you can subscribe up to three guest headsets to
your USB adapter for conferencing. As you add headsets to the
adapter, an additional headset icon will appear in the Plantronics
Control Panel with a number from 1 to 3 indicating the number of
guest headsets subscribed to the adapter.
Guests may conference in as described below:
1 While you are on a call, place the guest’s headset into
subscription mode.
2 Short press (less than one second) the subscription button on
the USB adapter. The USB adapter light will flash yellow and
green.
3 The USB adapter light will then turn solid yellow and you will
hear a tone in the master headset indicating a guest wishes to
join the call.
4 If you press the call control button on the master headset
within five seconds, the guest is joined to the call.
If you do not press the call control button within five seconds,
the request to join the call is rejected and the guest will hear an
error tone in their headset.
5 Guests may leave the conference call by pressing their call
control button.
When they do you will hear a single tone in the master headset
as each guest leaves the call.
To see how many headsets are subscribed to the adapter, refer
to the lower left-hand corner of the Plantronics Control Panel.
The first headset is the master headset and the number inside
the next headset is the number of guest headsets subscribed to
the adapter. The examples below show 1, then 2, then 3 guest
headsets subscribed to the adapter in addition to the master
headset.
1
2
3
Plantronics Savi User Guide
12
Plantronics Control Panel
User preferences and various device settings can be changed
using the Plantronics Control Panel. To start this program,
click Start > Programs > Plantronics > Plantronics Control
Panel.
Devices Tab
To configure your settings, select Plantronics D100 from the
pull down menu and click the Device Settings box. Below
are the setting options and defaults for the USB adapter and
headset.
NOTE Some parameters that do not apply to a particular
Plantronics device may appear grayed out.
Device Settings – USB Adapter Tab
Feature
Settings
Default
Options
Range
High/Med/Low
High
General
Auto Answer
PC Audio Bandwidth
Password (required)
Selected/Not selected
Wideband/Narrowband
Locked/Unlocked
Not selected
Narrowband
Unlocked
Audio
Feature Set Lock
range
Auto Answer
The Savi W410/W420 is supplied with high range set as the
default. Range can be minimized to help with PC buzzing,
improve user density, or restrict range of users.
The Savi W410/W420 is supplied with auto answer NOT
SELECTED as the default. Auto answer saves the user a button
press to establish the radio link between headset and adapter.
When auto answer is set to NOT SELECTED you must press
the headset call control button to answer an incoming call.
When Auto Answer is set to SELECTED an incoming call will be
answered when the headset is removed from the charge cradle.
To change the Range default in the software, go to : Start >
Programs > Plantronics > Plantronics Control Panel > Device
Settings – USB adapter. You can also change the range setting
by holding in the subscription button of the USB adapter for three
seconds while it is in an idle state. The USB adapter light will flash
green for high range, yellow for medium range and red for low
range.
To change the default, go to: Start > Programs > Plantronics >
Plantronics Control Panel > Device Settings – USB adapter.
PC Audio Bandwidth
The Savi W410/W420 is supplied with narrowband audio as the
default. Wideband audio delivers heightened speech clarity and
life-like fidelity. However, wideband audio consumes more battery
power and has more stringent access criteria which reduces the
number of systems that can be deployed in a small area. All PCs
support wideband audio.
When Range is set to HIGH a user will have up to 300 feet of
range. When Range is set to MEDIUM a user will have up to 150
feet of range. When Range is set to LOW a user will have up to
50 feet of range.
Plantronics Savi User Guide
13
To change the PC Audio Bandwidth default in the software, go
to: Start > Programs > Plantronics > Plantronics Control Panel
> Device Settings – USB adapter. You also can toggle between
narrowband and wideband audio by doing a short press (less
than one second) followed by a long press (more than three
seconds) on the USB adapter subscription button while it is in an
idle state. The USB adapter light will flash red for four seconds
upon entering narrowband mode and flash green for four seconds
upon entering wideband mode. When switching between
narrowband and wideband audio, you must re-establish the audio
link for the changes to take effect.
Feature Set Lock
See the Device Settings – Security Tab for more information.
Device Settings – Headset Tab
Options
Feature
Settings
Default
General
Mute Tone
Standard/Low/Off
Off
Ringtone
Sound 1/Sound 2/Sound 3
Standard/Low/Off
Sound 2
PC Volume
Standard
Standard
Ring Continuously
System Tones
Second Inbound Call
Standard/Low/Off
Ring Continuously/Ring Once/Ignore
Device Settings – Advanced Tab
Options
Feature
Settings
Default
Audio Protection
Anti-Startle
Selected/Not selected
Not selected
G616*
Selected/Not selected
80 dB/85dB/Off
Not selected
Off
Audio Limiting*
Hours on Phone Per Day
Password (required)
2/4/6/8
8
Locked/Unlocked
Unlocked
Feature Set Lock
*The Audio and G616 Limiting features are supported in over-the-head mode only and are based on a typical headset and recommended acoustic coupling between the headset
and the ear. Please see Headset setup for optimal wearing position.
Anti-Startle
G616
Anti-startle provides advanced hearing protection against sudden
loud sounds. When Anti-startle is SELECTED, the system
identifies and eliminates sudden loud sounds and rapidly reduces
them to a comfortable level. When Anti-startle is NOT SELECTED,
the headset limits sound levels at 118 dBA to protect your
hearing.
G616 Acoustic Limiting provides additional hearing protection
against acoustic shock. When G616 Acoustic Limiting is
SELECTED, the system provides additional acoustic shock
protection. Sound levels are limited to 102 dBA as recommended
in the G616:2006 guideline issued by the Australian
Communications Industry Forum (ACIF). When G616 Audio-
Limiting is NOT SELECTED, the headset limits sound levels at
118 dBA to protect your hearing.
Plantronics Savi User Guide
14
Audio Limiting
Audio Limiting provides advanced hearing protection for daily
noise exposure. When Audio-Limiting is SELECTED, the system
monitors and controls sound to ensure audio levels do not
exceed 80 dBA or 85 dBA (whichever is selected) specified by
current and imminent EU legislation. When Audio-Limiting is set
to NOT SELECTED, the headset limits sound levels at 118 dBA to
protect your hearing.
Feature Set Lock
See the Device Settings – Security Tab for more information.
Device Settings – Security Tab
Options
Feature
Default
Feature Set Lock
Create new password
None
Change password
None
Feature Set Lock
Applications Tab
The Plantronics software allows the following device settings to
be locked by the IT staff and prevent end users from changing
them.
The Applications Tab displays the status of Plantronics support for
various applications such as softphones and media players. The
status will only show as “enabled and running” for softphones and
media players installed and running.
• Range
• Auto Answer
• PC Audio Bandwidth
• Audio Protection (Anti-Startle, G616, Audio Limiting and Hours
on phone per day)
The ability to lock/unlock these settings requires a password. In
order to lock/unlock any setting follow these steps:
1 Create a new password
From the Security screen, create and confirm your
new password and press Set. This will store the password
directly in the device.
2 Lock/unlock a device setting
From the USB Adaptor or Advanced screen, enter your
password in Feature Set Lock, lock/unlock each feature as
desired and click Apply.
Change Your Password
You can always change the old password to a new one in
the Change Password section. You will only able to change a
password if there is a previous password set in the device.
NOTE In case you forget your password, you will need to call
your local Plantronics Technical Support for assistance.
Plantronics Savi User Guide
15
Preferences Tab
The Preferences Tab allows you to set preferences for the media
player as well as other general settings.
Options
Feature
Settings
Default
Media Player
Action to Media Player
– When a call begins
– When a call ends
Mute/pause/do nothing
Play/do nothing
Pause
Play
General
Launch audio devices control panel
(Provides a shortcut to the Windows Sounds and Audio Devices
control panel.)
Ring Both Headset and PC
Microsoft OC/Lync Dial-tone Enabled
Audio Sensing Enabled
Selected/Not selected
Selected/Not selected
Selected/Not selected
Selected/Not selected
Not selected
Not selected
Not selected
Not selected
Maintain Headset to PC Link
ring Both Headset and PC
This parameter gives you the option to have the PC ringtone
played on both the headset as well as the PC speaker.
to listen to music, etc., and does not want to hear the dial-tone.
In this case, if the user selects the “Audio Sensing Enabled”
parameter, the radio link will be established automatically when
any PC audio is detected at the USB port, thus eliminating the
need for the user to press the PC call control button.
When this parameter is selected, the PC ringtone will be heard on
both the PC speaker as well as the headset.
Maintain Headset to PC Link
When this parameter is not selected, the PC ringtone will only be
heard on either the headset or the PC speaker based on how the
PC audio has been set up.
This parameter forces the radio link to the PC to stay active
even after the call has ended. This can eliminate the need to
re-establish the radio link when switching between PC audio
applications.
Microsoft OC/Lync Dial-tone Enabled
If this feature is selected, when a PC radio link is established,
Microsoft OC/Lync will assume the user is trying to place a VoIP
call and provide a dial tone.
About Tab
If this feature is not selected, when a PC radio link is established,
Microsoft OC/Lync will sit idle.
The About Tab provides on-line access to this printable user guide
and also includes Plantronics contact information. The current
version of software and firmware currently running on your system
is also shown here.
Audio Sensing Enabled
Audio Sensing is a special feature supported by Plantronics
wireless devices that can detect an audio signal at the USB port
and automatically establish a PC radio link between the USB
adapter and wireless headset without the user having to press
the PC call control button. If the parameter “Microsoft OC/Lync
Dial-tone Enabled” is selected, then every time a PC radio link
is established the Microsoft OC/Lync dial tone will be heard.
However, the user may have pressed the PC call control button
Plantronics Savi User Guide
16
8 Plantronics Update Manager
All required software for Savi W410/W420 can be remotely
updated when updates are available. Start Plantronics Update
Manager from Windows Start Programs menu to change settings
such as automatic or manual check for updates.
Check for Updates Automatically
By enabling this check box, you will activate a periodic automatic
check for available software updates.
Check for Updates Now
You can choose to check for available software updates at any
time by clicking on the Check For Updates Now button in Update
Manager. From the Start menu > Programs > Plantronics >
Plantronics Update Manager.
Install Checked Updates
Following an Automatic or Manual Check For Updates, this
field will be populated with any applicable software updates and
the Install Checked Updates will begin installation.
Plantronics Savi User Guide
17
9 Troubleshooting and Common Questions
When I dial from my softphone
application, nothing happens.
Ensure your headset is charged.
Ensure your headset is subscribed to the USB adapter. See Subscribing a Headset.
Ensure that the Plantronics software is installed. To download, visit plantronics.com/software.
Ensure that you are using a compatible softphone application. For a list of compatible softphones,
visit plantronics.com/software.
If the Plantronics software is not installed and you do not have a compatible softphone, you must
first press the call control button and then use the softphone interface to place/answer/end calls.
Ensure that the headset is the default sound device. The Plantronics control panel will launch the
sound devices control panel by going to Plantronics Control Panel > Preferences > General –
Launch Audio Devices Control Panel.
Disconnect and re-connect the USB adapter. It will be solid red until it subscribes to the headset;
it will be solid green when successfully subscribed to the headset.
Restart your computer.
Speaking and/or listening volume is
too low or too high.
Adjust headset listening volume with volume button.
Adjust listening/speaking volumes in the computer’s sound control panel/system preferences.
Adjust listening/speaking volumes in the softphone application.
The sound is distorted or I hear an
echo in the headset.
Reduce speaking and/or listening volume on the computer using your softphone application.
Point microphone towards your chin.
If the distortion is still present, lower the volume on the headset.
I can no longer hear any audio
through my PC Speakers.
For Windows XP systems
• Refer to the “Audio” tab of the “Sounds and Audio Devices” option in your PC Control Panel.
• Under “Sound Playback”, change the default setting from Savi Office to your PC speakers.
Click “OK” to confirm your change.
For Windows Vista systems
• Refer to the “Sound” option in your PC Control Panel.
• Under the “Playback” tab, change the default setting from “Speakers Savi Office” to your PC
speakers. Click “OK” to confirm your change.
For Mac OS X
• Choose Apple menu > System Preferences and click Sound.
• Click Output, and then select “Internal Speakers” or your speaker choice.
Talk time performance is significantly The replaceable battery is wearing out. Contact plantronics.com to purchase a new battery. Use
degraded even after a full recharge.
only the battery type supplied by Plantronics.
Plantronics Savi User Guide
18
Plantronics, Inc.
345 Encinal Street
Santa Cruz, CA 95060
United States
Plantronics BV
South Point Building C
Scorpius 140
2132 LR Hoofddorp
Netherlands
EEE Yönetmeliğine Uygundur
plantronics.com
For product support contact us at plantronics.com/support or call 1-800-544-4660.
© 2013 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Savi, W410/W420, and Sound Innovation are trademarks or registered
trademarks of Plantronics, Inc. Microsoft, Windows and Vista are trademarks or registered trademarks of Microsoft Corporation. Skype is a
trademark of Skype Limited or other related Skype companies.
Patents US D538,785; US D505,413; US D535,285; EM 000543798-0004; EM 000543798-0005; CN 200630123314.7; CN 200630123313.2;
TW D117515; TW D117333; Other Patents Pending
89922-06 (07.13)
|