Polycom Server 3725 32799 002 User Manual

RMX™ 1000  
6
The Product Activation dialog box displays automatically.  
First-Time Power-up and Connection to RMX 1000  
Installation Quick Start Guide for RMX 1000  
Click Polycom Resource Center  
1
Connect your PC to the LAN1 port (the LAN1 port is enabled by default) of the  
RMX 1000, or connect your PC and RMX 1000 to the same switch in the LAN.  
to connect to Polycom web site  
(http://portal.polycom.com) and  
register your system.  
Follow the on screen instructions  
to obtain the Product Activation  
Key.  
Basic Setup  
2
3
Turn on the power switch at the RMX 1000.  
Configure the IP address for your PC, which is in the same network segment as the  
IP address of the RMX 1000.  
Before installing the RMX 1000 and performing the basic setup, please read the  
General Safety Precautions described in the Polycom RMX 1000 Getting Started  
Guide.  
Enter or paste the Product  
Activation Key obtained.  
The default IP address of the RMX 1000 is:  
IP address - 192.168.1.254  
Subnet mask - 255.255.255.0  
Default gateway IP address - 192.168.1.1  
Click Save  
Front Panel  
7
The system will display a message asking whether to restart the system or not.  
You can also view the current address information of the product using the RMX  
1000 Discover tool:  
Click Restart Now to validate the activation.  
a
Run the RMX 1000Discover.exe tool located in the CD provided with the  
product. You can also get it from the Polycom Web site (Link to Support ->  
Network -> RMX 1000).  
Modifying the Default IP Address of RMX 1000  
After the system restarts, you can enter the RMX 1000 Web configuration interface to  
modify the default IP address for the system based on the settings of your local  
network.  
b
Click Discover.  
Power Status  
LED  
LAN1&LAN 2  
Status LEDs  
Click IP Network Services,  
then double click LAN 1 item.  
Rear Panel  
1
Set the IP parameters using the  
information supplied by your  
network administrator:  
IP address, subnet mask and  
gateway  
Select Set as Default if you  
want to set the gateway as the  
default route  
4
Run the Web browser on the PC. Enter http://<RMX 1000 IP address> in the  
address bar, and then press Enter.  
Power Cable  
Off/On Switch  
LAN1 Connection  
NAT IP (Optional)  
DNS server IP address  
(Optional)  
The speed/duplex modes for  
If you want to shut off the device, please first turn off the power switch. Do not directly  
cut off the power supply or unplug the power cable.  
Enter POLYCOM  
Enter POLYCOM  
Click Login  
LAN1 port (Default Auto)  
2
5
1
3725-32799-002  
 

Pentax Camcorder Optio WS80 User Manual
Philips Battery Charger 357 User Manual
Philips Cell Phone PSA[CD User Manual
Philips DVD Player BDP3010 User Manual
Philips Home Theater System LX700 User Manual
Philips Portable CD Player AX3200 User Manual
Philips Security Camera Orion 2 User Manual
Philips TV Cables SWV6434D User Manual
Pioneer Headphones SE NC31C K User Manual
Planar Digital Camera 020 1229 00A User Manual