R
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
PP3000B
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en le-
siones graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le
faire pourrait entraîner des blessures graves.
Electrolux Home Products, Inc.
250 Bobby Jones Expressway
Augusta, GA 30907
Copyright E2002 Electrolux Home Products, Inc.
530088053
4/30/02
Have the unit repaired by your authorized
service dealer.
S Avoid dangerous environments. Do not
use in unventilated areas or where explo-
sive vapors or carbon monoxide build--up
could be present.
S Do not set unit on any surface except a
clean, hard area while engine is running.
Debris such as gravel, sand, dust, grass,
etc. could be picked up by the air intake and
thrown out through discharge opening,
damaging unit, property, or causing serious
injury to bystanders or operator.
S Do not overreach or use from unstable sur-
faces such as ladders, trees, steep slopes,
rooftops, etc. Keep firm footing and balance
at all times.
S Never place objects inside the discharge
opening; always direct the blowing debris
away from people, animals, glass, and solid
objects such as trees, automobiles, walls,
etc. The force of air can cause rocks, dirt, or
sticks to be thrown or to ricochet which can
hurt people or animals, break glass, or
cause other damage.
D Keep the extension cord clear of operator and
obstacles at all times. Do not expose cords to
heat, oil, water, or sharp edges.
D Avoid any body contact with any grounded
conductor, such as metal fences, or pipes, to
avoid the possibility of electric shock. Don’t
handle plug or unit with wet hands.
D Do not use with damaged cord or plug. If
powerhead is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, return it to your autho-
rized service dealer for repair.
D Ground Fault Circuit Interrupter (GFCI)
protection should be provided on the circuit
or outlet to be used for the powerhead. Re-
ceptacles are available having built-in
GFCI protection and may be used for this
measure of safety.
DOUBLE INSULATION
CONSTRUCTION
Your powerhead should be double insulated
to help protect against electric shock. Double
insulation construction consists of two sepa-
rate “layers” of electrical insulation instead of
grounding. Tools and appliances built with a
double insulation system are not intended to
be grounded.Safety precautions must be ob-
served when operating any electrical tool.
The double insulation system only provides
added protection against injury resulting from
an internal electrical insulation failure.
S Check air intake opening frequentl.yKeep
vents and discharge opening free of debris
which can accumulate and restrict proper
air flow.
S Never place any object in air intake opening
as this could restrict proper air flow and cause
damage to the unit.
S Never use for spreading chemicals, fertiliz-
ers, or other substances which may contain
toxic materials.
S To avoid spreading fire, do not use near leaf
or brush fires, fireplaces, barbecue pits,
ashtrays, etc.
WARNING: All repairs to an electric
powerhead, including housing, switch, motor,
etc., must be diagnosed and repaired by qual-
ified service personnel. Replacement parts
for a double insulated appliance must be iden-
S Wear hearing protection.
S Use only in daylight or good artificial light.
S Use only for jobs explained in this manual.
tical to the parts they replace. A double insu- MAINTAIN YOUR UNIT PROPERLY
lated appliance is marked with the words
“double insulation” or “double insulated”. The
WARNING: Disconnect powerhead
spark plug (or disconnect powerhead from
power source) before performing mainte-
nance.
D Have all maintenance other than the rec-
ommended procedures described in the in-
struction manual performed by your autho-
rized service dealer.
D Always see your authorized service dealer to
replace a damaged impeller. Parts that are
chipped, cracked, broken, or damaged in
any other way can fly apart and cause seri-
ous injury. Have damaged parts replaced
before using attachment.
D Use only recommended Poulan PRO! re-
placement parts; use of any other parts
may void your warranty and cause damage
to your unit.
D Never douse or squirt the attachment with
water or any other liquid.
symbol
(square within a square) may also
be marked on the appliance. Failure to have
the unit repaired by your authorized service
dealer can cause the double insulation con-
struction to become ineffective and result in
serious injury.
BLOWER SAFETY
WARNING: Never put hands or other
objects into blower housing to avoid serious
injury from the rotating impeller.
WARNING: Inspect the area before
using the unit. Remove all debris and hard
objects such as rocks, glass, wire, etc., that
can ricochet, be thrown, or otherwise cause
injury or damage during operation.
S Inspect attachment before each use for
worn, loose, missing, or damaged parts. Do
not use until unit is in proper working order.
S Keep outside surfaces free from oil and
fuel.
S Never start or run engine inside a closed
room, building or other unventilated area.
Breathing exhaust fumes can kill.
TRANSPORTING AND STORAGE
D Hand carry the unit with the engine
stopped.
D Allow the powerhead and attachment to
cool and secure the unit before storing or
transporting in a vehicle.
-- 3 --
D Store unit and fuel in area where fuel vapors color or texture, or loss of feeling in the fingers,
cannot reach sparks or open flames from
water heaters, electric motors or switches,
furnaces, etc.
hands, or joints, discontinue the use of this tool
and seek medical attention. An anti--vibration
system does not guarantee the avoidance of
D Store in a high, cool, dry, indoor area out of these problems. Users who operate power tools
reach of children.
on a continual and regular basis must monitor
closely their physical condition and the condition
of this tool.
SAVE THESE INSTRUCTIONS
SPECIAL NOTICE: Exposure to vibrations
through prolonged use of gasoline powered
hand tools could cause blood vessel or nerve
damage in the fingers, hands, and joints of peo-
ple prone to circulation disorders or abnormal
swelling. Prolonged use in cold weather has
been linked to blood vessel damage in other-
ASSEMBLY
wise healthy people. If symptoms occur such as Your attachment is fully assembled; no as-
numbness, pain, loss of strength, change in skin sembly is necessary.
OPERATION
KNOW YOUR BLOWER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BLOWER ATTACHMENT. Compare the illustrations with your unit to familiarize yourself with the
location of the various controls and adjustments. Save this manual for future reference.
Hanger
Air Intake
Blower Discharge
Opening
-- 4 --
3. Push the attachment into the coupler until
the locking/release button snaps into the
primary hole.
4. Before using the unit, tighten the knob se-
curely by turning clockwise.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler
which enables optional attachments to be
installed. The optional attachments are:
MODEL:
Edger . . . . . . . . . . . . . . . . . . . . . . .PP1000E
Cultivator . . . . . . . . . . . . . . . . . . .PP2000T
Brushcutter . . . . . . . . . . . . . . . . .PP4000C
INSTALLING ATTACHMENT
HANGER
An attachment hanger is provided for storage
when attachment is not in use. To install hang-
er on attachment:
WARNING: Always disconnect pow-
erhead spark plug (or disconnect powerhead
from power source) before removing or instal-
ling attachments.
1. Remove the tube cap from the attach-
ment (if present) and discard.
2. Press and hold the locking/release but-
ton.
3. Push hanger onto the attachment until
the locking/release button snaps into the
hole.
REMOVING ATTACHMENT
CAUTION: When removing or installing at-
tachments, place the unit on a flat surface for
stability.
1. Loosen the coupler by turning the knob
counterclockwise.
Upper Tube
OPERATING POSITION
Coupler
LOOSEN
ALWAYS WEA
Eye Protection
Lower
Attachment
TIGHTEN
Knob
2. Press and hold the locking/release button.
Locking/Release
Button
WARNING: Inspect the area before
using the unit. Remove all debris and hard
objects such as rocks, glass, wire, etc., that
can ricochet, be thrown, or otherwise cause
injury or damage during operation.
Coupler
Lower Attachment
Upper Tube
3. While securely holding the upper tube,
pull the attachment straight out of the
coupler.
Use your blower attachment for:
S Sweeping debris or grass clippings from
driveways, sidewalks, patios, etc.
S Blowing grass clippings, straw, or leaves into
piles, or removing debris from corners,
around joints, or between bricks.
Control air flow by directing the blower dis-
charge opening down or to one side. Always
work away from solid objects such as walks,
large stones, vehicles, and fences.
INSTALLING ATTACHMENT
1. Remove the tube cap from the attach-
ment (if present) and discard.
2. Position locking/release button of attach-
ment into guide recess of upper tube cou-
pler.
Primary Hole
Coupler
Guide Recess
Clean corners by starting in corners and moving
outward. This will help prevent an accumulation
of debris which could fly into your face.
Be careful when working near plants. The force
of the air could damage tender plants.
Locking/ Attachment
Release
Button
Upper
Tube
-- 5 --
MAINTENANCE
INSPECT AND CLEAN UNIT
WARNING: Always stop unit and dis-
connect spark plug wire (or disconnect pow-
erhead from power source) before performing
maintenance.
AND LABELS
S After each use, inspect complete unit for
loose or damaged parts. Clean the unit and
labels using a damp cloth with a mild deter-
gent.
CHECK FOR LOOSE FASTENERS
S Wipe off unit with a clean dry cloth.
AND PARTS
S Housing Screws
STORAGE
SEASONAL STORAGE
WARNING: Perform the following
steps after each use:
Prepare attachment for storage at end of sea-
son or if it will not be used for 30 days or more.
If your blower attachment is to be stored for a
period of time:
S Allow attachment to cool before storing or
transporting.
S Store in a high, cool, dry, indoor area out of S Clean the entire unit.
reach of children.
S Inspect attachment for any loose or dam-
aged parts. Tighten any loose screws.
S Replace any damaged, worn or broken
parts.
S At the beginning of the next season, use
only fresh fuel having the proper gasoline to
oil ratio.
LIMITED WARRANTY
ELECTROLUX HOME PRODUCTS, INC.,
THIS WARRANTY GIVES YOU SPECIFIC
warrants to the original purchaser that each LEGAL RIGHTS, AND YOU MAY HAVE
new Poulan PRO! brand gasoline tool or at- OTHER RIGHTS WHICH VARY FROM
tachment is free from defects in material and STATE TO STATE.
workmanship and agrees to repair or replace
under this warranty any defective gasoline
NO CLAIMS FOR CONSEQUENTIAL OR
OTHER DAMAGES WILL BE ALLOWED,
product or attachment as follows from the AND THERE ARE NO OTHER EXPRESS
original date of purchase.
WARRANTIES EXCEPT THOSE EX-
PRESSLY STIPULATED HEREIN.
SOME STATES DO NOT ALLOW LIMITA-
TIONS ON HOW LONG AN IMPLIED WAR-
2 YEARS-- Parts and Labor, when used for
household purposes.
90 DAYS -- Parts and Labor, when used for
commercial, professional, or income produc- RANTY LASTS OR THE EXCLUSION OR
ing purposes.
LIMITATIONS OF INCIDENTAL OR CON-
30 DAYS -- Parts and Labor, if used for rental SEQUENTIAL DAMAGES, SO THE ABOVE
purposes.
LIMITATIONS OR EXCLUSION MAY NOT
This warranty is not transferable and does not APPLY TO YOU.
cover damage or liability caused by improper The policy of ELECTROLUX HOME PROD-
handling, improper maintenance, or the use UCTS, INC., is to continuously improve its
of accessories and/or attachments not spe- products. Therefore, ELECTROLUX HOME
cifically recommended by ELECTROLUX
HOME PRODUCTS, INC., for this tool. Addi-
PRODUCTS, INC., reserves the right to
change, modify, or discontinue models, de-
tionally, this warranty does not cover tune- signs, specifications, and accessories of all
ups, spark plugs, filters, cutting line, or rotat- products at any time without notice or obliga-
ing head parts that will wear and require re- tion to any purchaser.
placement with reasonable use during the
warranty period. This warranty does not cov-
er predelivery setup or normal adjustments
explained in the instruction manual.
-- 6 --
|