User’s Manual UA-PRO310
Support up to 150 lbs / 68 kg
Included Mounting Hardware
You Will Need
1 Mount
(x1)
(x4)
(x4)
(x4)
(x4)
(x4)
(x4)
(x4)
(x1)
A Level
2 M5, M6 & M8 x 10 bolts
3 M5, M6 & M8 x 15 bolts
4 M5, M6 & M8 x 25 bolts
5 5/16” x 3” lag bolts
6 Concrete Anchors
7 Ø 10 Washers
B Stud Finder
C Phillips Screwdriver
D Drill
E 3/16” or 3/8”drill bit
F Hammer
8 Square Washers
9 Allen wrench (No. 5 & No. 6)
800 mm VESA
extension (x4)
To reach
800x400 mm
use extensions
Arm
Tilt
Cover
Cable Cover
Wall Bracket
End Cover
Bracket
vBar
INSTALLATION UA-PRO310
1.1a Ø 3/16” (x2)
Drywall installation
1a
1.2a Lag Bolts (x2)
1.3a Re-attach cover (x2)
Brick (Mortar) Installation
1b
1.1b Ø 3/8” (x2)
1.2b Concrete anchors (x2)
1.3b Lag Bolts (x2)
1.4a re-attach cover (x2)
INSTALLATION (2) UA-PRO310
Tilt
adjust nut
2
2.1 Remove bolts (x4) and release
vBars (x2)
2.2 Attach vBars to TV with M5,
M6 or M8 bolts (x4)
2.3 Re-attach TV by hanging vBar
hooks on bracket (x2) and...
2.4 tighten M5, M6 or M8 bolts
(x4)
2.5 Run cables and cover up.
|