Quick Eagle Networks Network Card DL3150 User Guide

The DL3150 and DL3155  
Access Multiplexer  
Economical T3 / E3 access for  
high-speed data applications.  
Main Benefits:  
Bandwidth is becoming more and more a commodity. As a result bandwidth  
prices have slipped, which is one of the main reasons for the increased demand  
for subrate or full T3/E3 transmission services. Another driving force for the  
increased demand for high-speed transmission services is the diversity and  
complexity of today's data applications.  
Software changeable T3/E3  
interface, which enables you to  
select preferred interface during  
setup and supports worldwide  
deployment  
Extensive diagnostic and  
management features such as  
Ethernet management port, SNMP  
agent, or serial console port  
enable local and remote fault  
analysis  
TM  
Quick Eagle Networks’ DL3150 and DL3155 Access Multiplexers make high-  
speed data connectivity more economical by enabling you to connect your data  
terminal equipment (DTE) devices to a public or private T3 / E3 network at full or  
subrate speeds. Both units support symmetric and asymmetric data rates of up  
to 34.2 Mbps (in 358 Kbps increments for E3) or 44.2 Mbps (in 300 Kbps increments  
for T3).  
Symmetric and asymmetric data  
rates in 300 Kbps (T3) or 358 Kbps  
(E3) increments  
With a software selectable T3 / E3 network interface the DL3150 and DL3155  
enable worldwide deployment. It just takes you a stroke of a key to change  
between the T3 and E3 firmware.  
M13 framing and C-bit parity  
compliant (T3) as well as Clear  
Channel and standard Mux  
compliant (E3)  
The DL3150 Access Multiplexer provides one HSSI data interface to the DTE,  
while the DL3155 Access Multiplexer comes equipped with two HSSI data  
interfaces. The second HSSI port on the DL3155 enables you to take advantage  
of multiplexing capabilities. An Ethernet management port as well as a serial  
console port provide additional options for you to manage the devices besides  
SNMP management and Telnet capabilities.  
Smooth clock support on HSSI  
(towards LAN) as well as  
asymmetric clock towards WAN for  
compatibility with satellites  
Small footprint and low cost  
ensure economical T3 / E3  
access for one or two high-speed  
data applications  
Ideal for carrier backbone connectivity via satellite, the DL3150 and DL3155  
Access Multiplexers offer smooth clock support on the HSSI (towards the LAN)  
as well as asymmetric clock support towards the WAN.  
The proprietary “Digital Link” mode that is supported by the DL3150 and DL3155  
Access Multiplexers is also supported by many leading T3/E3 router vendors.  
The DL3150 and DL3155 Access Multiplexers are your best choice when it  
comes to taking advantage of T3 / E3 transmission services.  
 
The following diagrams show some of the typical applications supported by the DL3150 / DL3155 Access Multiplexer:  
Application 1: Point-to-point deployment with remote and local management  
DL3150 Access Multiplexer  
DL3150 Access Multiplexer  
Public  
Network  
HSSI  
Corporate  
LAN  
HSSI  
Access Multiplexer  
Ethernet  
T3 / E3  
T3 / E3  
Cisco 7204 or  
Cisco 3660  
Frame Relay Switch  
or Cisco 750x  
RS-232  
RS-232  
10/100  
10/100  
Modem  
Modem  
PSTN  
NMS  
NMS  
NOC  
NMS  
Application 2: Linking an ISP POPs backbone via satellite  
Microwave Tower  
Microwave Tower  
Uplink: 8 Mbps  
Downlink: 34 Mbps  
Microwave Transceiver  
Microwave Transceiver  
T3 / E3  
T3 / E3  
Access Multiplexer  
Access Multipl  
HSSI  
HSSI  
Satellite Modem  
Cisco Router  
ISP  
Application 3: Multiple services by separating traffic into two scalable channels with full or subrate T3 or E3 connectivity  
Video  
DL3155 Access Multiplexer  
DL3155 Access Multiplexer  
Public  
Network  
HSSI  
Access Multiplexer  
Video  
HSSI  
T3 / E3  
T3 / E3  
HSSI  
HSSI  
Cisco 7204 or  
Cisco 3660  
Cisco 7204 or  
Cisco 3660  
 
DL3150 / DL3155 Access Multiplexer  
Loaded Network Interface  
T3 Firmware  
E3 Firmware  
(selectable during configuration)  
(selectable during configuration)  
Network Interface  
Line Rate  
T3 (44.736 Mbps ± 20 ppm)  
BNC  
E3 (34.368 Mbps ± 20 ppm)  
BNC  
Connector Type  
Line Code  
B3ZS  
HDB3  
Standard M13 or C-bit parity  
Meets Bellcore TR-TSY-000009  
0 ft to 225 ft, 226 ft to 450 ft  
75 ohm unbalanced, resistive  
Network, internal, or external  
Framing  
G.751 or clear channel  
CCITT G.703  
Pulse Shape  
Transmit LBO  
Impedance  
0 ft to 225 ft, 226 ft to 450 ft  
75 ohm unbalanced, resistive  
Network, internal, or external  
System Timing  
Data Interface  
Port  
HSSI  
HSSI  
Up to 44.2Mbps in multiples of 300 kbps  
50-pin socket Amplimitie (HSSI)  
Rate  
Up to 34Mbps in multiples of 358 kbps  
50-pin socket Amplimitie (HSSI)  
Connector Type  
2nd Data Interface  
(Available with DL3155 model only)  
Port  
Rate  
HSSI  
HSSI  
Up to 44.2Mbps in multiples of 300 kbps  
50-pin socket Amplimitie (HSSI)  
Up to 34Mbps in multiples of 358 kbps  
50-pin socket Amplimitie (HSSI)  
Connector Type  
Headquarters  
Management Connectors  
COMM Port  
RJ-45 socket  
RJ-45 socket  
Quick Eagle Networks (USA)  
830 Maude Avenue  
Fast Ethernet Port  
10/100 Ethernet port  
10/100 Ethernet port  
Mountain View, CA 94043  
+1 650-962-8282 Phone  
+1 650-962-7950 Fax  
Power Requirements  
Voltage  
110 VAC to 230 VAC, 47-63 Hz, or -42  
VDC to -72 VDC  
110 VAC to 230 VAC, 47-63 Hz, or -42  
VDC to -72 VDC  
www.quickeagle.com  
1.2 amps maximum  
Consumption  
1.2 amps maximum  
Diagnostics  
Loopback Tests  
Northern, Central & Eastern Europe  
Local and remote DTE/network  
Local and remote DTE/network  
INS, ALM, RED, YEL, BLU, BPV, DTR  
INS, TEST, TD, RD, TA/RTS, CA/CTS, DTR  
Network Port LEDs  
Data Port LEDs  
INS, ALM, RED, YEL, BLU, BPV, DTR  
INS, TEST, TD, RD, TA/RTS, CA/CTS, DTR  
Southern Europe, Middle East & Africa  
Asia / Pacific Rim  
Physical  
1 RU, rack mountable  
Dimensions  
1 RU, rack mountable  
22.3 cm (8.75 in ) W, x 33 cm (13 in) D,  
x 4.13 cm (1.63 in) H  
22.3 cm (8.75 in ) W, x 33 cm (13 in) D,  
x 4.13 cm (1.63 in) H  
Latin, Central & South America  
Weight  
2.27 kg (5 lbs.)  
2.27 kg (5 lbs.)  
Canada  
Environmental  
Operating Temperature  
Storage Temperature  
Relative Humidity  
0º - 50º C  
0º - 50º C  
-35º - 85º C  
-20º - 60º C  
0 - 95% non-condensing  
-6.1 m (-200 ft) to 3,048 m (10,000 ft)  
0 - 95% non-condensing  
-6.1 m (-200 ft) to 3,048 m (10,000 ft)  
Maximum Altitude  
Order Information  
DL3150: DL3150 Access Multiplexer with single HSSI port and single software  
selectable T3/E3 network interface  
© 2007 Quick Eagle Networks. All rights reserved.  
0.5k/DP/05/07  
The information presented herein may change without notice  
and should be used for informational purposes only. DL3150  
Access Multiplexer and DL3155 Access Multiplexer are  
trademarks of Quick Eagle Networks.  
DL3155: DL3155 Access Multiplexer with dual HSSI port and single software  
selectable T3/E3 network interface  
 

Rangemaster Refrigerator SxS 661 User Guide
RCA DVD Player DRC6282 User Guide
Ricoh Printer C830DN User Guide
RIDGID Portable Generator RD8000 User Guide
Samsung Microwave Oven CE2977N User Guide
Sanyo Heat Pump WCHDZ32053 User Guide
Sanyo Vacuum Cleaner SC B550R User Guide
Seagate Computer Drive 72009 User Guide
Senco Nail Gun SCN55S User Guide
Sennheiser Headphones 830 S User Guide