Safety Precautions
Safety Precautions
Safety Precautions
The lightning flash with an arrowhead
symbol, within the equilateral triangle, is
intended to alert the user to the presence of
uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient
magnitude to cause an electric shock.
•
The apparatus should not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, should be placed on apparatus.
Notes on Copyright
user manual
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted material
without permission.
On Safety
Apparatus Claims of U.S. Patent Nos. 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936 licensed for limited
viewing uses only.
This product incorporates copyright protection technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
•
When connecting or disconnecting the AC power adapter, grip the plug and not the cord itself. Pulling the
cord may damage it and create a hazard.
•
When you are not going to use the unit for a long period of time, disconnect the AC power adapter.
The exclamation point within the equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in this
owner’s manual.
DRC99370
On Condensation
•
When left in a heated room where it is warm and damp, water droplets or condensation may form inside the
unit. When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1
to 2 hours before turning the power on, or gradually heat the room and allow the unit to dry before use.
* SEE BOTTOM OF UNIT FOR GRAPHIC SYMBOLS *
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Ventilation Warning
•
Do not block the ventilation openings or holes. If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.
Important Safety Instructions
WARNING: Should any trouble occur, disconnect the AC power adapter and refer servicing to a qualified technician.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DO
NOT PLACE OBJECTS FILLED WITH LIQUIDS ON OR NEAR THIS UNIT.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR
EQUIVALENT TYPE.
•
Do not operate the unit in a confined space, such as a bookcase or built-in cabinet. Allow about 4 inches
(10cm) of free space all around the unit for adequate ventilation.
1. Read these instructions.
receptacles, and the point where they exit from
the apparatus.
2. Keep these instructions.
3. Heed all warnings.
11. Only use attachments/accessories specified by
the manufacturer.
Rating Plate Location
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block the ventilation openings. Install in
accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of a polarized
or grounding - type plug. A polarized plug has
two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
•
The rating plate is located on the bottom of unit.
12. Use only with a cart, stand,
t r i p o d, b ra c k e t, o r t a b l e
FCC Statements
specified by the manufacturer,
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
or sold with the apparatus.
This product contains a
low power laser device.
When a car t is used, use
caution when moving the
cart/apparatus combination to
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
avoid injury from tip-over.
On Placement
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as the AC power
cord or plug is damaged, liquid has spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
•
•
•
Do not use the unit in places that are extremely hot, cold, dusty, or humid.
Place the unit on a flat and even surface.
AVC Multimedia,
Markham, Ontario L3R 1E3
–
–
–
–
Reorient or relocate the receiving antenna.
Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth,
or by placing it on carpeting.
Increase the separation between the equipment and receiver.
•
•
To avoid magnetizing, do not place the unit near speakers or magnets.
Do not use this unit in direct sunlight or leave the unit in a closed automobile (or similar environments)
where it would be exposed to high temperatures above 104°F (40°C).
No naked flame sources such as lighted candles should be placed on the AC power adapter or the main unit.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Read these instructions before using your new product for the first time.
•
E - 1
E - 2
Control Reference Guide
Unit
E - 3
Disc Formats
Accessories
The unit can play back
DVDs
[8cm/12cm disc]
Audio CDs
[8cm/12cm disc]
Remote Control
Please check and identify the supplied accessories.
Compatible
1. VIDEO MODE button
SETUP button
In Stop Mode, press to display the unit’s
SETUP menu.
9. MENU button
Enter and exit the main DVD Menu.
NEXT button
Skip to next title, chapter or track on a
disc.
11. STOP button
Stop playing a disc.
PLAY button
Start or resume playback of a disc.
PAUSE button
Press once to pause playback. Press
subsequently to advance frame by frame
on a DVD.
PREV button
VIDEO
Remote Control (with battery)...............................................................................................................................................x 1
AC Power Adapter.......................................................................................................................................................................x 1
Car Power Adapter......................................................................................................................................................................x 1
MODE
PREV
GOTO
MENU
NEXT
Region Management Information
9
Adjust Brightness,
Panel Display and
Contrast of the LCD
screen.
Press to go back to the previous title / chapter /
track.
1
SEARCH
Region Management Information: This unit is designed and manufactured to respond to the Region
Management Information that is encoded on DVDs. If the region number printed on the DVD does not
correspond to the region number of this unit, it cannot play that disc.
2
3
4
10
STOP
PAUSE
In DVD Menu or Setup Menu, press to scroll
left.
SEARCH button
11
PLAY
ENTER
5
6
2.
3.
PREV button
10.
MEMORY
M
ANGLE
DISPLAY
12
13
14
The region number of this unit is 1.
Press to scroll up, press and hold to perform
fast forward playback during CD playback.
In DVD Menu, Setup Menu or JPG Menu,
press o scroll up.
Move back through
titles, chapters or
tracks on a disc.
AUDIO
2
5
8
3
6
Disc Function or Operation That is Not Available
SUBTITLE/
RETURN
Remote Control
4
7
15
7
8
When the symbol appears on the screen, it indicates the function or operation attempted is not available at that
time. This occurs because the DVD manufacturer determines the specific functions of DVDs. Certain functions may
not be available on some DVDs. Be sure to read the documentation provided with the DVD.
/
S E A R C H
9
0
NEXT button
SETUP
buttons
Using the Remote Control
A-B
DISC
Press to advance titles / chapters / tracks.
In DVD Menu or Setup Menu, press to scroll
right.
S E A R C H : Fa s t
reverse playback.
S E A R C H : Fa s t
forward playback.
REPEAT
•
Point the remote control at the REMOTE SENSOR located
on the unit.
When using this unit in very bright light, the infrared
REMOTE SENSOR may not work properly.
Icons Used on DVDs
Remove the
PLASTIC sheet
before USING the
Remote Control.
Language selections for audio
Sample lcons
•
SEARCH button
Press to scroll down, press and hold to
Language selections for subtitles
Note:
4. GOTO button
Skip directly to a location on a CD/DVD.
5. Cursor ( ) buttons
1. LCD screen
Screen aspect ratio
perform fast reverse playback during CD
2. DC IN 9V - 12V jack
playback.
When playing back a CD-G (Graphics) or CD
12. DISPLAY button
Show status information on the screen.
Multiple camera angles
EXTRA disc, the audio portion will be played,
but the graphic images will not be shown.
,
,
,
3. AUDIO / VIDEO OUT jack
In DVD Menu, Setup Menu or JPG Menu, press
4. CHARGE / STANDBY / ON switch
to scroll down.
1
Move between selections on a menu screen and adjust 13. ANGLE button
To Change Remote Battery
1. Open the battery door.
Battery Replacement
Region code indicator
5. VOLUME control
certain settings.
ENTER button
Confirm selections on a menu screen.
6. MEMORY button
Set titles/chapters in a favorite order.
7. Number (0 - 9) buttons
Switch between multiple camera angles if
applicable to the DVD.
14. AUDIO button
Select one of the audio sound tracks on
a DVD (if more than one is available) or
select the audio output mode on a CD.
When the battery becomes weak,
the operating distance of the remote
control will be greatly reduced and you
will need to replace the battery.
2. Insert one CR2025 (3V)
size battery.
8. Disc Door
Adjusts the volume.
Titles, Chapters and Tracks
Push to close the disc door.
Title1
Title2
6. Headphone jack
•
DVDs are divided into “titles” and “chapters”. If the disc
9. OPEN knob
7.
STOP button
Press to stop playing a disc.
MENU button
has more than one movie on it, each movie would be a
separate “title”. “Chapters” are sections of titles.
Audio CDs are divided into “tracks”. A “track” is usually
one song on an Audio CD.
Press the open knob to open the disc door.
10.Remote sensor
Chapter1
Chapter2
Track2
Chapter3
Track3
Chapter1
Chapter2
Track5
•
Senses the remote control's signals.
11.ON indicator
Accesses DVD Disc Menu if DVD disc is currently
playing.
Use when creating programs or locating a title/chapter/ 15. SUBTITLE button
Track1
Track4
Note: If the remote control is not going to be used for a long time, remove the battery.
track or specific time.
8. REPEAT A-B button
Select one of the subtitle languages
programmed on a DVD (if available).
RETURN button
Return to normal operation after using the
SETUP menu of a DVD.
Note: Numbers identify each title, chapter, and track on a disc. Most discs have these numbers recorded on
them, but some do not.
12.CHARGING indicator
Accesses Setup menu if disc is not playing.
button
Charge the rechargeable battery before
using it for the first time. Complete charging
typically takes approximately 4-5 hours. The
charging light will go out when the battery
becomes fully charged.
WARNING: Do not dispose of the battery in a fire or it may leak and/or explode.
WARNING: Batteries should not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Perform point-to-point repeat playback on a DVD or CD.
REPEAT DISC button
Press to start or resume playback of a disc.
Pressing during playback of a disc will cause
playback to be paused.
Notes on Unauthorized Discs
Repeat a DVD chapter or title.
Repeat a CD track or the whole disc.
You may not be able to play some DVDs on this unit, particularly if they were purchased from outside your
geographic area or made for business purposes.
E - 4
E - 5
E - 6
E - 7
Power Supply
Connections
Cautions:
Warnings:
A. Using the AC Power Adapter
A. Connecting a TV
•
The built-in battery can only be recharged when the unit is in CHARGE mode while using the AC power
adapter.
•
•
•
•
Use the provided 12V car power adapter only. Use with other car power adapters could damage the unit.
The 12V car power adapter included with this unit is for its use only. Do not use it with other equipment.
In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle.
Make sure the unit is securely fastened to prevent it from falling or flying through the air in the event of an
accident.
If your TV has audio/video inputs, you can connect the unit to your TV using standard Audio/Video cables.
The supplied AC power
adapter operates on AC
100-120V.
1
•
•
•
The built-in battery cannot be recharged when the unit is in ON mode.
Do NOT recharge the built-in battery in a vehicle using the car power adapter.
Batteries should not be exposed to excessive heat such as sunshine, fire or the like.
To wall outlet
AC power adapter
•
•
When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may become
hot due to poor contact. Be sure to clean the cigarette lighter socket before use.
After use, disconnect the 12V car power adapter from both the unit and cigarette lighter socket.
TV
To DC IN 9V Jack
Notes:
2
Cautions:
•
•
•
•
•
When the built-in battery power is low, "Battery Low" will display on the screen and the unit will stop playing.
White Red Yellow
•
•
•
The AC power adapter included with this unit is for its use only. Do not use it with other equipment.
When the unit is not going to be used for long time, disconnect the AC power adapter from the wall outlet.
When the AC power adapter is plugged in, the apparatus is not completely disconnected from the main
power supply, even when the power is turned off.
Recharge the built-in battery when you are ready to use it again.
To AUDIO / VIDEO OUT jacks
While using the built-in battery, the environmental temperature should be 41°F (5°C) to 95°F (35°C).
To get the longest service life of the built-in battery, charge at indoor-temperature.
The built-in battery in this device may present a risk of fire or chemical burn if mistreated. Do not
disassemble, heat above 212oF (100oC), or incinerate.
Audio / Video cable
(not included)
C. Using the Built-in Battery
The unit has a built-in, non-replaceable, rechargeable battery. Charge the built-in battery before using it for the
first time. Complete charging typically takes approximately 4-5 hours. The charging light will go out when the
built-in battery becomes fully charged.
Watching a DVD on your TV
1. Turn on the unit.
2. Turn on the TV and follow the instructions included with it to watch video from external sources.
Warning:
•
•
The unit should not be exposed to excessive heat such as sunshine, fire or the like.
When discarding the unit, environmental problems must be considered and local rules or laws governing
the disposal of such products must be strictly followed.
The AC/DC adaptor is used as disconnect device. The AC/DC adaptor of apparatus should not be obstructed
OR should be easily accessed during intended used. To be completely disconnect the power input, the AC/DC
adaptor of apparatus shall be disconnected from the mains.
To recharge the built-in battery
B. Using Headphones/Earphones
B. Using the Car Power Adapter
The 12V car power adapter
allows the unit to be used
with vehicles that have
a 12V, negative ground
electrical system.
Turning on the Unit
To AC power
•
Turn down the volume before connecting, and then adjust
the level.
1
1. Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the ON
outlet
position.
•
When headphones/earphones are connected, no sound will
be emitted from the unit's speaker.
1
2. The start-up picture will appear on the screen.
3. After use, slide the CHARGE / STANDBY / ON switch to the STANDBY (power off)
position.
AC power
adapter
To cigarette
lighter socket
Caution:
To DC IN 9V
jack
To DC IN 9V Jack
2
Avoid listening to sound at levels which may be harmful to your
ears.
Car power adapter
2
Headphones/Earphones
(3.5mm diameter plug)
(not included)
Warning:
Disconnect the car power
adapter when not in use.
Not for use in 24V vehicles.
R e c h a rg i n g i s
Slide the switch
to CHARGE
5
completed when
charging light
goes out
Charging
light ON
3
4
E -8
E - 9
E - 10
E - 11
|