Roland Stereo Amplifier CUBE 30X User Guide

Owner’s Manual

Thank you, and congratulations on your choice of the Roland CUBE-30X Guitar Amplifier.

Before using this unit, carefully read the sections entitled

•IMPORTANT SAFETY INSTRUCTIONS (page 2)

•USING THE UNIT SAFELY (page 3–5)

•IMPORTANT NOTES (page 5)

Additionally, in order to feel assured that you have gained a good grasp of every

feature provided by your new unit, Owner’s manual should be read in its entirety.

The manual should be saved and kept on hand as a convenient reference.

Main Features

• 30-watt output, high-performance, DSP guitar amp with built-in 25 cm (10-inch)

speaker.

• Offers nine different COSM amp types

Amps included: JC CLEAN, ACOUSTIC, BLACK PANEL, BRITISH COMBO,

TWEED, CLASSIC STACK, METAL STACK, R-FIER STACK

and DYNA AMP

Composite Object Sound Modeling (COSM) is Roland’s innovative and powerful

sound modeling technology. COSM analyzes the many factors that make up the

original sound, such as the electrical and physical characteristics of the original,

and then produces a digital model that can reproduce the same sound.

• Channels can be switched between CLEAN and LEAD. Channel switching can be

done via optional footswitch.

• The CUBE-30X includes Roland’s Power Squeezer function. This feature enables

you to reduce the maximum output from 30 watts to 2 watts at the press of a single

button. When switched on, Power Squeezer reproduces the distortion of a fully-

cranked power amp along with a great sound, regardless of the volume level, but

with a 2-watt output that is easy to handle in the home.

• A tuner function is also included. This feature allows you to tune your guitar

while the instrument is connected to the CUBE-30X.

• Includes easy-to-use, three-band equalizer (Bass/Middle/Treble).

• Onboard EFX section includes 4 types of digital effect, chorus, flanger, phaser and

tremolo; footswitch (optional) can be used to switch EFX on and off.

• Separate “Delay” and “Reverb” effects provided in addition to the EFX.

• Equipped with “RECORDING OUT jack” convenient for use in recording and for

use as headphone out.

• The unit is equipped with an external input jack, which is convenient for your

practice sessions. Use this to play along with sounds from CD players and MP3

players.

written permission of ROLAND CORPORATION.

USING THE UNIT SAFELY

The

symbol alerts the user to important instructions

Used for instructions intended to alert

the user to the risk of death or severe

injury should the unit be used

improperly.

or warnings.The specific meaning of the symbol is

determined by the design contained within the

triangle. In the case of the symbol at left, it is used for

general cautions, warnings, or alerts to danger.

Used for instructions intended to alert

the user to the risk of injury or material

damage should the unit be used

improperly.

The

symbol alerts the user to items that must never

be carried out (are forbidden). The specific thing that

must not be done is indicated by the design contained

within the circle. In the case of the symbol at left, it

means that the unit must never be disassembled.

* Material damage refers to damage or

other adverse effects caused with

respect to the home and all its

furnishings, as well to domestic

animals or pets.

The ● symbol alerts the user to things that must be

carried out. The specific thing that must be done is

indicated by the design contained within the circle. In

the case of the symbol at left, it means that the power-

cord plug must be unplugged from the outlet.

•

⁰⁰¹Before using this unit, make sure to read the

•

⁰⁰⁹Do not excessively twist or bend the power cord,

nor place heavy objects on it. Doing so can

damage the cord, producing severed elements

and short circuits. Damaged cords are fire and shock

hazards!

instructions below, and the Owner’s Manual.

..........................................................................................................

002a

•

Do not open or perform any internal modifica-

tions on the unit.

..........................................................................................................

⁰¹⁰This unit, either alone or in combination with an

•

⁰⁰³Do not attempt to repair the unit, or replace parts

•

amplifier and headphones or speakers, may be

capable of producing sound levels that could

within it (except when this manual provides

specific instructions directing you to do so). Refer

all servicing to your retailer, the nearest Roland Service

Center, or an authorized Roland distributor, as listed on

the “Information” page.

cause permanent hearing loss. Do not operate for a long

period of time at a high volume level, or at a level that is

uncomfortable. If you experience any hearing loss or

ringing in the ears, you should immediately stop using

the unit, and consult an audiologist.

..........................................................................................................

•

⁰⁰⁴Never use or store the unit in places that are:

..........................................................................................................

• Subject to temperature extremes (e.g., direct

sunlight in an enclosed vehicle, near a heating

duct, on top of heat-generating equipment); or

are

•

⁰¹¹Do not allow any objects (e.g., flammable

material, coins, pins); or liquids of any kind

(water, soft drinks, etc.) to penetrate the unit.

• Damp (e.g., baths, washrooms, on wet floors); or are

• Humid; or are

..........................................................................................................

012a

• Exposed to rain; or are

•

Immediately turn the power off, remove the

power cord from the outlet, and request servicing

by your retailer, the nearest Roland Service

Center, or an authorized Roland distributor, as listed on

the “Information” page when:

• Dusty; or are

• Subject to high levels of vibration.

..........................................................................................................

⁰⁰⁷Make sure you always have the unit placed so it is

•

• The power-supply cord, or the plug has been

damaged; or

level and sure to remain stable. Never place it on

stands that could wobble, or on inclined surfaces.

• If smoke or unusual odor occurs

..........................................................................................................

008a

• Objects have fallen into, or liquid has been spilled onto

the unit; or

•

The unit should be connected to a power supply

only of the type described in the operating

instructions, or as marked on the unit.

• The unit has been exposed to rain (or otherwise has

become wet); or

..........................................................................................................

• The unit does not appear to operate normally or

exhibits a marked change in performance.

..........................................................................................................

•

⁰¹³In households with small children, an adult

Placement

• Using the unit near power amplifiers (or other equipment

should provide supervision until the child is

capable of following all the rules essential for the

safe operation of the unit.

351

containing large power transformers) may induce hum. To

alleviate the problem, change the orientation of this unit;

or move it farther away from the source of interference.

..........................................................................................................

⁰¹⁴Protect the unit from strong impact.

352a

•

• This device may interfere with radio and television reception.

Do not use this device in the vicinity of such receivers.

352b

(Do not drop it!)

• Noise may be produced if wireless communications devices,

..........................................................................................................

such as cell phones, are operated in the vicinity of this unit.

Such noise could occur when receiving or initiating a call, or

while conversing. Should you experience such problems,

you should relocate such wireless devices so they are at a

greater distance from this unit, or switch them off.

•

⁰¹⁵Do not force the unit’s power-supply cord to

share an outlet with an unreasonable number of

other devices. Be especially careful when using

extension cords—the total power used by all devices you

have connected to the extension cord’s outlet must never

exceed the power rating (watts/amperes) for the

extension cord. Excessive loads can cause the insulation

on the cord to heat up and eventually melt through.

354b

• Do not expose the unit to direct sunlight, place it near

devices that radiate heat, leave it inside an enclosed

vehicle, or otherwise subject it to temperature extremes.

Also, do not allow lighting devices that normally are used

while their light source is very close to the unit (such as a

piano light), or powerful spotlights to shine upon the

same area of the unit for extended periods of time.

Excessive heat can deform or discolor the unit.

..........................................................................................................

•

⁰¹⁶Before using the unit in a foreign country, consult

with your retailer, the nearest Roland Service

Center, or an authorized Roland distributor, as

listed on the “Information” page.

355b

• When moved from one location to another where the

temperature and/or humidity is very different, water

droplets (condensation) may form inside the unit. Damage

or malfunction may result if you attempt to use the unit in

this condition. Therefore, before using the unit, you must

allow it to stand for several hours, until the condensation

has completely evaporated.

..........................................................................................................

•

⁰²⁶Do not put anything that contains water (e.g.,

flower vases) on this unit. Also, avoid the use of

insecticides, perfumes, alcohol, nail polish, spray

cans, etc., near the unit. Swiftly wipe away any liquid that

spills on the unit using a dry, soft cloth.

356

• Do not allow rubber, vinyl, or similar materials to remain

on the unit for long periods of time. Such objects can

discolor or otherwise harmfully affect the finish.

..........................................................................................................

359

• Do not paste stickers, decals, or the like to this instrument.

Peeling such matter off the instrument may damage the

exterior finish.

360

• Depending on the material and temperature of the surface

on which you place the unit, its rubber feet may discolor

or mar the surface.

You can place a piece of felt or cloth under the rubber feet

to prevent this from happening. If you do so, please make

sure that the unit will not slip or move accidentally.

101a

•

The unit should be located so that its location or

position does not interfere with its proper ventilation.

..........................................................................................................

102a

•

Always grasp only the plug on the power-supply cord

when plugging into, or unplugging from an outlet.

..........................................................................................................

103a

•

At regular intervals, you should unplug the

power plug and clean it by using a dry cloth to

wipe all dust and other accumulations away from

its prongs. Also, disconnect the power plug from the

power outlet whenever the unit is to remain unused for

an extended period of time. Any accumulation of dust

between the power plug and the power outlet can result

in poor insulation and lead to fire.

109a

•

¹⁰⁴Try to prevent cords and cables from becoming

Before cleaning the unit, turn off the power and

unplug the power cord from the outlet.

entangled. Also, all cords and cables should be

placed so they are out of the reach of children.

..........................................................................................................

110a

106

•

Whenever you suspect the possibility of lightning

in your area, pull the plug on the power cord out

of the outlet.

Never climb on top of, nor place heavy objects on the unit.

..........................................................................................................

¹¹⁹The cooling vents on either side of the unit may

107a

•

Never handle the power cord or its plug with wet hands

when plugging into, or unplugging from, an outlet.

•

become hot, so take care to avoid burns.

..........................................................................................................

¹²¹Do not remove the speaker grille and speaker by

108a

•

Before moving the unit, disconnect the power

plug from the outlet, and pull out all cords from

external devices.

any means. Speaker not user replaceable. Shock

hazardous voltages and currents are present

inside the enclosure.

..........................................................................................................

IMPORTANT NOTES

291b

In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2,

3, 4 and 5, please read and observe the following:

Power Supply

Additional Precautions

301

• Do not connect this unit to same electrical outlet that is

⁵•⁵³Use a reasonable amount of care when using the unit’s

buttons, sliders, or other controls; and when using its jacks

and connectors. Rough handling can lead to malfunctions.

being used by an electrical appliance that is controlled by an

inverter (such as a refrigerator, washing machine,

microwave oven, or air conditioner), or that contains a

motor. Depending on the way in which the electrical

appliance is used, power supply noise may cause this unit

to malfunction or may produce audible noise. If it is not

practical to use a separate electrical outlet, connect a power

⁵•⁵⁶When connecting / disconnecting all cables, grasp the

connector itself—never pull on the cable. This way you

will avoid causing shorts, or damage to the cable’s

internal elements.

supply noise filter between this unit and the electrical outlet.

557

307

• A small amount of heat will radiate from the unit during

normal operation.

558a

• Before connecting this unit to other devices, turn off the

power to all units. This will help prevent malfunctions

and/or damage to speakers or other devices.

• To avoid disturbing your neighbors, try to keep the unit’s

308

volume at reasonable levels. You may prefer to use

headphones, so you do not need to be concerned about

those around you (especially when it is late at night).

• Although the LEDs are switched off when the POWER

switch is switched off, this does not mean that the unit has

been completely disconnected from the source of power. If

you need to turn off the power completely, first turn off

the POWER switch, then unplug the power cord from the

power outlet. For this reason, the outlet into which you

choose to connect the power cord’s plug should be one

that is within easy reach and readily accessible.

559a

• When you need to transport the unit, package it in the box

(including padding) that it came in, if possible. Otherwise,

you will need to use equivalent packaging materials.

562

• Use a cable from Roland to make the connection. If using

some other make of connection cable, please note the

following precautions.

Maintenance

401a

• Some connection cables contain resistors. Do not use

cables that incorporate resistors for connecting to this

unit. The use of such cables can cause the sound level

to be extremely low, or impossible to hear. For infor-

mation on cable specifications, contact the manufac-

turer of the cable.

• For everyday cleaning wipe the unit with a soft, dry cloth

or one that has been slightly dampened with water. To

remove stubborn dirt, use a cloth impregnated with a

mild, non-abrasive detergent. Afterwards, be sure to wipe

the unit thoroughly with a soft, dry cloth.

402

• Never use benzine, thinners, alcohol or solvents of any kind,

•

Wrap the power cord around the cord hook when trans-

porting or storing the unit.

to avoid the possibility of discoloration and/or deformation.

Panel descriptions

Control Panel

fig.01-01

BRIT COMBO

1. INPUT Jack

This is modeled on the Vox AC-30TB, the rock amplifier

that created the Liverpool sound of the ’60s. It can

produce a broad range of sounds, from clean to

overdrive, with increased distortion and greater power in

the low-midrange when the amplifier’s gain is boosted.

Connect your guitar here.

2. SELECT Switch

Switches between the CLEAN and LEAD channels.

You can confirm which channel is selected by checking

the indicator’s color (JC CLEAN: left; LEAD: right).

TWEED

Channels can be switched using optional BOSS FS-5U or

FS-6 footswitches.

This is modeled on the vintage Tweed Fender Bassman

4x10 combo. The amplifier’s four 10-inch speakers produce

a clear upper-midrange with a fat low end, and its unique

crunch tones make it a favorite of blues-rock guitarists.

3. TUNER Switch

The switch lights in red when the tuner function is on;

the switch is unlit when the tuner is off.

For more detailed information, refer to p. 8.

CLASSIC STACK

This is modeled on the sound and response of a Marshall

JMP1987. The legendary JMP1987 is renowned for its

smooth tone and presence-perfect for classic and hard rock.

This is a model of Roland’s famous JC-120 Jazz Chorus guitar

amplifier. The ultra-clean, ultra-flat sound offers a smooth feel.

METAL STACK

This is modeled on the Peavey EVH-5150. This is the

high gain amp, so even at low volumes, you can still get

heavy distortion and sustain.

4. VOLUME Knob

Adjusts the JC CLEAN channel volume.

R-FIER STACK

This is modeled on the MESA/Boogie Rectifier. This

super high gain amp is capable of producing slash metal,

grunge, and a wide range of other lead sounds.

5. Type Switch

You can select from the following eight types.

When the tuner function is on, you can use this to select

the name of the string to be tuned (p. 8).

DYNA AMP

This is an original amp sound that lets the player create

previously unobtainable tonal changes according to the

picking strength. Soft picking produces a transparent clean

amp sound, while hard picking results in a deeply

distorted high-gain amp sound. Once the sound is

distorted, the tone then changes according to the force used

in picking, greatly expanding your range of expression.

ACOUSTIC

By combining acoustic guitar simulation with COSM

amplifier modeling technology, this original amplifier

model gives you a dynamic acoustic guitar sound using

a standard electric guitar.

BLACK PANEL

This is modeled on the classic Fender Twin Reverb

amplifier, used in a wide variety of musical styles, from

country to blues, jazz and rock. Exhibiting rich lows and

a bright high end.

Use of the RECORDING OUT/PHONES jack allows even better

reproduction of the COSM-modeled sound.

Panel descriptions

All product names mentioned in this document are trademarks

or registered trademarks of their respective owners, and are not

related to Roland Corporation.

In this manual, these names are used as appropriate ways to

indicate sounds that are simulated using COSM technology.

PHASER

This effect adds a variable

phaseshifted signal to the direct

sound, giving the sound a swirling

character.

6. GAIN Knob

TREMOLO

Tremolo is an effect that creates a

Adjusts the LEAD channel’s distortion level.

cyclic change in volume.

7. VOLUME Knob

Adjusts the LEAD channel volume.

EQUALIZER

8. BASS Knob

Adjusts the tone quality of the lower range.

12. DELAY/REVERB Knob

Turn this knob to DELAY or REVERB to switch to that

effect.Turn the knob to adjust the amount of effect

applied.

9. MIDDLE Knob

Adjusts the tone quality of the midrange.

10.TREBLE Knob

Graduations for DELAY, REVERB on a panel are for

reference.

Adjusts the tone quality of the upper range.

Because COSM faithfully models the special features and

characteristics of a variety of amplifiers; no sound will be

produced when BASS, MIDDLE, and TREBLE knob are all

set to 0 while the Type switch is set to BLACK PANEL or

TWEED.

Be sure to check the sound as you adjust the effects.

DELAY

Turn the knob to change the time

and amount of delay effects.

EFX (Effects)

REVERB

Turn the knob to adjust the reverb

level.

11.EFX (Effects) Knob

Turn this knob to chorus, flanger, phaser, or tremolo to

select the corresponding effect. Turn the knob to adjust

the amount of effect applied.

The ON indicator lights up when EFX is turned on, and

goes out when EFX is turned off. You can also turn EFX

on and off using optional footswitches (BOSS FS-5U or

FS-6).

13.POWER SQUEEZER Switch

The switch lights in red when the power squeezer

function is on; the switch is unlit when the power

squeezer is off.

Graduations for CHORUS, FLANGER, PHASER, TREMOLO

on a panel are for reference. Be sure to check the sound as you

adjust the effects.

Switching on the Power Squeezer function allows you to

reduce the amp’s output to 2 watts.

CHORUS

Switching this on allows you to produce a sound that

preserves the same tone and balance as when the amp is

played at maximum volume, but at an output of 2 watts,

for volume levels that are more suitable for the average

home.

In this effect, a slightly detuned

sound is added to the original

sound, giving the sound greater

breadth and fullness.

The Power Squeezer function affects only sounds input

through the INPUT jack. It has no effect on sounds input via

the AUX IN jack.

FLANGER

This creates a flanging effect that

creates a sort of spinning sensation

with the sound.

Panel descriptions

14.AUX IN Jack

TUNING

You can use “manual tuning,” whereby you switch to each

individual string to tune it separately, and “chromatic

tuning,” which automatically determines the closest pitch to

that played by the string.

You can connect a CD player, MP3 player or other kind

of device and have it play along with your guitar.

This accepts a stereo miniature phone plug. However,

the speaker and RECORDING OUT/PHONES output is

monaural.

Determine the volume level by adjusting the volume control of

the connected device.

Tuning in “Manual Mode”

1. Press the TUNER switch.

15.FOOT SW (Footswitch) Jack

2. Use the Type switch to select the name of the string you

You can use footswitches (optional BOSS FS-5U or FS-6)

connected using a connection cable (optional Roland

PCS-31) to switch channels (JC CLEAN/LEAD), and to

turn EFX on and off.

want to tune, then play a single note on the open string.

No sound is played through the unit’s speaker while the tuner

function is in use.

PCS-31

white

red

EFX

SELECT

Polarity Switch

Reference Pitch: A4=440 Hz

When you connect only one footswitch by mono cable, you can

only use it to switch channels (JC CLEAN/LEAD).

3. Tune the string until the green indicator lights.

16.RECORDING OUT/PHONES Jack

When Using RECORDING OUT

Use mono 1/4” phone plugs when

connecting to this jack.

When the pitch is even

lower, the indicator flashes.

Volume level of RECORDING

OUT can be easily adjusted if you

set the CLEAN or LEAD channel

VOLUME as shown in the diagram

on the right.

When Using Headphones

Connect headphones to this jack.

No sound is played through the unit’s speaker while the

RECORDING OUT/PHONES jack is in use.

17.POWER Switch

This switches the power on and off.

When the pitch is even

higher, the indicator flashes.

This unit is equipped with a protection circuit. A brief interval

(a few seconds) after power up is required before the unit will

operate normally.

Tuning in “Chromatic Mode”

1. Hold down the TUNER switch for at least one second

so that the red indicator flashes.

If you need to turn off the power completely, first turn off the

POWER switch, then unplug the power cord from the power

outlet. Refer to “Power Supply” (p. 5).

2. Play a single note on the open string you want to tune.

3. Tune the string until the green indicator lights.

Connections

Refer to the figure shown below to connect the CUBE-30X to other equipment.

fig.01-02

945

Switching the Power On and Off

Once the connections have been completed, turn on power to

your various devices in the order specified. By turning on

devices in the wrong order, you risk causing malfunction

and/or damage to speakers and other devices.

If you need to turn off the power completely, first turn off the

POWER switch, then unplug the power cord from the power

outlet. Refer to “Power Supply” (p. 5).

921

To prevent malfunction and/or damage to speakers or other

devices, always turn down the volume, and turn off the power

on all devices before making any connections.

1. Make sure that all volume controls on the CUBE-30X

and connected devices are set to 0.

2. Turn on all the devices connected to the CUBE-30X ’s

Before making the connections, be sure that the volume setting

input jacks (INPUT jack and AUX IN jack).

of the VOLUME knob for both amplifiers is set to “0.”

926a

3. Turn on the CUBE-30X.

4. Switch on any equipment connected to the CUBE-30X’s

When connection cables with resistors are used, the volume

level of equipment connected to the inputs may be low. If this

happens, use connection cables that do not contain resistors,

such as those from the Roland PCS series.

RECORDING OUT/PHONES jack.

5. Adjust the volume levels for the devices.

6. Before switching off the power, lower the volume on each of

the devices in your system and then TURN OFF the devices

in the reverse order to which they were switched on.

This unit is equipped with a protection circuit. A brief interval

(a few seconds) after power up is required before the unit will

operate normally. For protection from sudden big sound,

always make sure to have the volume level turned down before

switching on power. Even with the volume all the way down,

you may still hear some sound when the power is switched on

and off, but this is normal, and does not indicate a malfunction.

Sample Settings

Alternative Metal

The perfect sound for heavy, sharp riffs.

Select the high-gain R-FIER amp, then use the equalizer to

boost the low end even more.

Used with a humbucking pickup in the rear position, it

results in an extreme distortion effect.

Plus, you can add a long delay to use this as a lead sound

with great sustain.

Adding a short delay produces a doubling sound like that

from two performers playing the same phrases

simultaneously.

SELECT : LEAD

Space Clean

This is a transparent sound using spacial effects.

Select the JC CLEAN amp, modeled on the Roland JC-120,

then add chorus and long delay.

Using this setting with a guitar equipped with single coil

pickups makes great sounding arpeggios and chord

strumming.

Depending on the phrase being played, it can be effective

to set the delay sound’s delay time slightly slower than the

phrase’s tempo.

Classic Rock

This is a 70s-style rock sound.

Turning up the gain produces a powerful rock sound in all

riffs and solos.

A powerful low end is a characteristic of the sound emitted

by the surfaces of the cabinet, so you can turn up the

equalizer knobs, especially the BASS knob, and increase to

produce a sound with great punch.

Turning down the GAIN knob is also a perfect way to get a

sharp crunch sound.

Dynamic Style

DYNA AMP is an original amp that uses relative picking

strength to create changes in distortion depth.

First, adjust the GAIN knob so that a clean tone is obtained

with soft picking and deep distortion is obtained when you

pick hard.

Now, mixing arpeggios played with a gentle touch along

with firmly picked chords and solos results in a guitar

sound with huge dynamics.

Now, to create a broader, more open sound, cut the

midrange and raise the low end.

Using this in combination with the EFX and delay and

reverb creates a sound with an even greater feeling of scale.

Main Specifications

● Power Consumption

CUBE-30X

34 W

● Rated Power Output

● Dimensions

30 W

385 (W) x 240 (D) x 380 (H) mm

15-3/16 (W) x 9-1/2 (D) x 15 (H) inches

● Nominal Input Level

INPUT (JC CLEAN channel): -10 dBu/1 MΩ

● Weight

AUX IN: -10 dBu

9.3 kg / 20 lbs 9 oz

● Speakers

● Accessories

25 cm (10 inch)

Owner’s Manual

● Controls

● Options

POWER Switch

SELECT Switch

TUNER Switch

Footswitch: FS-5L (BOSS)

FS-6 (BOSS)

POWER SQUEEZER Switch

Connection Cable: PCS-31

VOLUME Knob

0 dBu = 0.775 Vrms

TYPE Switch (ACOUSTIC, BLACK PANEL, BRIT

COMBO, TWEED, CLASSIC STACK, METAL

STACK, R-FIER STACK)

In the interest of product improvement, the

specifications and/or appearance of this unit are subject

to change without prior notice.

GAIN Knob

VOLUME Knob

BASS Knob

MIDDLE Knob

TREBLE Knob

<EFX>

EFX Knob (CHORUS, FLANGER, PHASER, TREMOLO)

DELAY/REVERB Knob

● Indicators

JC CLEAN Channel

LEAD Channel

EFX

TUNER

POWER SQUEEZER

● Connectors

INPUT Jack

AUX IN Jack

FOOT SW Jack (SELECT, EFX)

RECORDING OUT/PHONES Jack

● Power Supply

AC 117 V, AC 230 V or AC 240 V

For EU Countries

This product complies with the requirements of European Directives EMC 89/336/EEC and LVD 73/23/EEC.

For the USA

FEDERAL COMMUNICATIONS COMMISSION

RADIO FREQUENCY INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

–

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Unauthorized changes or modification to this system can void the users authority to operate this equipment.

This equipment requires shielded interface cables in order to meet FCC class B Limit.

For Canada

NOTICE

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

AVIS

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

SD000903

1*DH

Pyramid Technologies Home Theater System SE703EX User Guide
Raritan Computer Switch MCC16 MCC4R User Guide
Reebok Fitness Treadmill RCTL097070 User Guide
Renesas Power Supply HD74LV1G14A User Guide
RIDGID Saw AC99402 User Guide
RocketFish Corded Headset RF GPS31201 User Guide
Rosewill Computer Keyboard RK 9000 User Guide
Samsung MP3 Player YH 820 User Guide
Samsung Stereo Receiver C560S User Guide
Saturn Automobile 2005 Relay User Guide