4 Bay eSATA RAID 0/1/10/5/JBOD SUB SYSTEM
w/ 6G PCIe Card
RSV-S4-6G
Quick Installation Guide
Thank you for purchasing a quality Rosewill Product.
complete warranty information and future support for your product.
4 Bay eSATA RAID 0/1/10/5/JBOD SUB SYSTEM w/ 6G PCIe Card RSV-S4-6G
QIG
4. Fasten the tool-less screws to secure the HDD.
5. Close the front panel and the chassis cover, and fasten the tool-less screws on the
back panel.
Hardware Connection Diagram
Installing the PCIe Adapter Card to a Computer
Insert the PCIe Card into an available
PCIe Slot on your computer (Step 1) and
secure with screw (Step 2).
2
4 Bay eSATA RAID 0/1/10/5/JBOD SUB SYSTEM w/ 6G PCIe Card RSV-S4-6G
QIG
Windows System Installation
Step 1
From your desktop, point the cursor at “My Computer”, right click
and select “Manage”.
Step 2
Right click on “Mass Storage Controller” and select “Update
Driver”.
Step 3
Select “Manual Setup (Recommended Selection)”, specify driver
from CD-Rom.
Step 4
3
4 Bay eSATA RAID 0/1/10/5/JBOD SUB SYSTEM w/ 6G PCIe Card RSV-S4-6G
QIG
Select the driver and begin installation process. After SATA card
installation is completed, it will be ready for use.
RAID Mode Setup and Diagrams
To setup RAID mode, please insert the included CD into the computer and install the SATA RAID
Utility. Follow the installation guide in the Detailed Manual to fully setup the desired RAID mode.
4
|