®
ENFORCER
Relay Module
SR-2224-C5
Features:
•
•
•
Two separate sets of Form-C dry contacts.
Perfect for a variety of general switching purposes.
Can be connected for load switching, dry contact, latching
output, reverse polarity, line seizure, and other uses.
6/12/24 VDC operation, programmable by on-board
jumpers.
•
•
•
•
Red LED indicates relay is energized.
Large terminal blocks for easy installation.
Small size, easily fits inside alarm panel enclosures
or other hidden areas.
Connection Diagram
•
Foam mounting tape included.
Two separate sets of Form-C contacts
Input terminals to energize relay
Specifications:
Model Number:
Relay type:
SR-2224-C5
DPDT, Form-C dry contacts
5A @ 250VAC/30VDC
Relay contact ratings:
Programmable 6/12/24VDC,
default at 12VDC
Supply Voltage:
Current draw:
70mA @ 12-24VDC
100mA @ 6VDC
6V 12V 24V
JP1 ON ON OFF
JP2 ON OFF OFF
Preset 12V
Minimum pull voltage +/- 20% of operating voltage
2.76" x 1.89" x .79"
(70 x 48 x 20mm)
Size
Red LED - lights to show
relay is energized
2 Jumpers to
program
input voltage
(6,12,24V)
Weight
1.94 oz. (55 g)
Foam tape (included)
Mounting method:
®
®
ENFORCER
Power Supplies
Four Models to Choose From
ENFORCER
Timer Modules
SA-025
●
● Switch selectable (see chart below) DC voltage output.
● Regulated and filtered output voltage.
Triggered by positive voltage (+DC), closure of dry contact, or
opening of dry contact.
● Switches to backup battery automatically in case of power loss.
● Short circuit protection.
● Built-in backup battery charger.
●
●
●
●
●
●
●
●
●
Set from 1 sec. to 60 min.
Relay programmable to activate at start or end of timing cycle.
Relay programmable for pulse (flash) activation.
Built-in reset function.
Model #
Voltage (DC)
6,12
Current
1.5A
Current (peak)
Form-C relay, contacts rated 8A @ 120VAC/24VDC.
LED indicator.
12/24VDC (auto sensing).
Low
Power input
Current drain
Relay type
ST-1206-1.5A
ST-2406-2A
ST-2406-3A
ST-2406-5A
2.0A
2.0A
3.0A
5.0A
12/24VDC (auto sensing).
Low current drain.
6,12,24
6,12,24
6,12,24
1.5A
Form-C relay
2.5A
7
1
2 /8" x 2 /2" (73 x 63 mm).
Contact ratings 8A @ 120VAC/24VDC.
4.0A
SECO-LARM® U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 1-800-662-0800 (Domestic U.S. & Canada) Tel: 1-949-261-2999 (California &international)
RelayModuleb.p65
|