SECO LARM USA TV Converter Box MVA VH01Q User Guide

MVA-VH01Q  
VGA-to-HDMI Converter  
Manual  
Converts VGA formats to HDMI.  
Supports resolution up to 1280x1024.  
Audio input allows conversion of audio as well as video.  
Plug and play operationno setup neccessary.  
NOTE: Model numbers that end with “Q” or products that have a round green “Q” sticker signify RoHS compliance.  
 
SECO-LARM VGA-to-HDMI Converter  
Overview:  
VGA Input  
HDMI Output  
To 5VDC  
RCA Input  
Power Adapter  
Installation:  
1. Determine the location where the MVA-VH01Q unit will be installed.  
2. Connect the input source’s VGA cable to the VGA input on the MVA-VH01Q.  
3. Connect the source’s RCA cable to the audio input on the MVA-VH01Q.  
4. Connect the output source’s HDMI cable to the HDMI output on the MVA-VH01Q.  
5. Connect the included 5VDC adapter to the unit.  
6. Switch on the input and output sources and verify that the system is functioning properly.  
Sample Application:  
HDMI Display  
HDMI Cable  
VGA Cable  
RCA cable  
To power  
source  
Computer or DVR  
SECO-LARMDUo.wSn.loAa.d, fIrnomc.Www.Somanuals.com. All Manuals Search And Download.  
SECO-LARM VGA-to-HDMI Converter  
Troubleshooting  
Make sure the converter is powered.  
Make sure the input and output devices are powered.  
Test the VGA and RCA cables separately to make sure  
they are functioning.  
Test the HDMI cable separately to make sure it is  
functioning.  
HDMI device does not function correctly  
Make sure that you are trying to convert VGA to  
HDMI. The MVA-VH01Q does not convert HDMI  
to VGA.  
Make sure the HDMI source is compatible with the  
HDMI display.  
Products Available from SECO-LARM:  
Component Video  
over Cat5e/6  
VGA over Cat5e/6  
1-in 5-out  
HDMI over Cat5e/6  
Audio Baluns  
HDMI Cables  
HDMI Switcher  
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal  
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is  
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.  
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,  
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines  
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.  
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only, at  
SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential  
personal or property damages of any kind to the purchaser or anyone else.  
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the  
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right  
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.  
Copyright © 2010 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in  
whole or in part, without the written permission of SECO-LARM.  
SECO-LARM U.S.A., Inc.  
16842 Millikan Avenue, Irvine, CA 92606  
E-mail: sales@seco-larm.com  
PICCN3  
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326  
mi-MVA-VH010Q_1005.docx  
SECO-LARM U.S.A., Inc.  
 

QSC Audio Speaker System YM 300 User Guide
Radio Shack Baby Toy 60 2805 User Guide
RCA Flat Panel Television RLED4664A User Guide
Regency Wraps Fire Pit U41 LP3 User Guide
Ricoh Printer SP 3600DN User Guide
Rosewill Network Card RC 402 User Guide
Runco Projector VX 1000CI User Guide
Samsung Washer SW81ASP User Guide
Sanyo Flat Panel Television PDP 32H1ENV User Guide
Sanyo Projector PLV Z5 User Guide