User Account Setup
iOS Wireless Camera Setup
SmartCam Control Guide
English
Before you begin setting up the camera, you must create an user account.
Follow these easy steps to register your account.
Continue with camera setup by following the app wizard instructions.
Once setup is complete and live video appears on your iOS device, tap the
screen to display the SmartCam tool bar. This chart serves as a reference
to navigate onscreen controls and customize your SmartCam experience.
Quick Start Guide for iOS Setup
3A
Before you begin your SmartCam Setup, please:
Have your SmartCam and power adapter ready.
Have your iOS device available to download the SmartCam app.
Make sure you are within range of the same Wi-Fi network you’ll use for
your camera.
Back
Back
ꢀ
ꢀ
ꢀ
test
test
Have your Wi-Fi network password handy.
ꢀ
1. Tap <Wireless
2. Connect the power
and press Wi-Fi
3. Exit SmartCam app
by pressing the
5. Find the last 4 digits of your
SmartCam serial #, then
6. Select your Wi-Fi
4. Go to your phone
settings. Select
If you have questions or need help installing your SmartCam, please
1-877-349-3149 (9am – 9pm EST, Mon – Sun)
Please visit samsungsmartcam.com for full user manual, mobile app
manual and FAQs.
Setup>.
network.
1. Go to the App Store 2. Search for "Samsung 3. Open the app.
4. Tap <Create new
contact our free technical support.
button on the back
of the camera.
home button.
enter password “smartcam”.
Return to SmartCam app.
<Wi-Fi> settings.
from your iPhone or
iPad.
SmartCam".
account>.
a
b
c
d
e
f g h i j
Number
1. Manual Recording
Description
Tap to save streaming video onto the SD card
Product Views For Setup
2. Capture
Tap to capture and save a still image during monitoring
Use the following illustrations to familiarize yourself with the camera setup
parts. For a more detailed diagram, please see User’s Manual.
3. Two-Way Talk
Tap to begin and end Two-Way Talk between mobile device and camera
3A. Microphone Button During Two-Way Talk, press Mic Button on screen to talk, release to listen
4. HQ
Tap to view the highest video quality available
Tap to view and choose melody selection to play through camera
Tap to adjust screen image brightness
4
2
3
5
5. Melody
7. Enter your Wi-Fi
network password
and tap <Next>.
8. When the LED light
turns green, you
9. Create Camera
Name & Password.
1-20 letters and/or
numbers.
10. If you want to
begin viewing
live video, select
<No>. If you
11. Select your Time
Zone and then tap
<Next>.
12. Enable motion and/
or audio detection to
receive event alerts
on your devices.
5. Tap <Start>.
6. Enter User ID,
Password, valid
Name and e-mail
address.
7. Tap <Next> to
register your
camera.
6. Brightness Control
7. Flip Control
will automatically be
directed to Step 9.
1
7
Tap to flip screen image vertically or horizontally
Password: 1-8
letters and/or
want to continue
selecting setting
preferences, select
<Yes>.
6
Tap <Register>.
Tap to enable Motion Zone Select by drawing up to three boxed areas on your screen for
motion alerts in only those specific areas
numbers.
8. Motion Zone Select
Record your SmartCam information here:
Account Registration
9. Audio Message
Recorder
Tap to record up to 10 messages to be played through the camera speakers
Tap to display current audio and video information
1) Power/Wi-Fi Status LED
5) Reset Button
Camera Registration
2) MicroSD Card Slot (up to 32GB) 6) Network Port (Used for wired
10. Information
3) Wi-Fi Direct Button
4) Serial Number (S/N:)
connections)
USER ID: ______________________ USER PASSWORD: ____________
CAMERA NAME: _______________ CAMERA PASSWORD: _________
You have now successfully completed the SmartCam setup.
7) Power Input
8-14 letters or letters with numbers
Example: johnsmith
10-14 letters and numbers combination
Example: smartcam123
1-20 letters and/or numbers
Example: LivingRoom
1-8 letters and/or numbers
Example: 1234
SNH-E6411BN-Quick Start Guide-ENG-미주.indd 1-5
2014-08-19 오후 12:15:39
|