Samsung Bread Maker CS21A11 User Guide

Connecting to the RCA Input

Connection Panel_{(depending on the model)}

COLOR TELEVISION

CS21A11/CS21M7/CS21M20/CS21S8/

CS21T10/CS21T20/

CS25A6/CS25A11/CS25K10/CS25M6/

CS25M20/

The RCA¨ and RCAˆ connectors are used for equipment,

such as a VCR, DVD, decoder, satellite receiver, video game

device, or video disc player. (When using the mono

equipment, connect to the AUDIO-L input connector.)

The RCA∏ connectors are used for equipment such as a

DVD with component output (480i only).

The actual configuration of your TV may be different,

depending on your model.

➢

Rear Panel

CS29A7/CS29A11/CS29K3/CS29K5/

CS29K10/CS29M6/CS29M16/CS29M20

Connecting to the RCA Output

The RCAØ connectors are used for equipment, such as a

recording VCR or audio system.

Owner’s Instructions

Before operating, please read this manual thoroughly,

and retain it for future reference.

cable television network

Front (or Side) Panel

www.samsung.com/global/register

Œ Audio input

Control Panel_{(depending on the model)}

´ Video input

The actual configuration of your TV may be different,

depending on your model.

ˇ S-Video input

➢

¨ Headphone jack

Whenever you connect an audio or video system to your

☛

Front (or Side) Panel

television, ensure that all elements are switched off.

Please be sure to match the color coded input terminals

and cable jacks.

Please be sure to match the color coded input terminals

☛

and cable jacks.

Connecting to an Aerial or Cable Television Network

Connecting to the RCA Input

Connect the aerial or network input cable to the Œ (75 Ω

coaxial socket).

The Œ (AUDIO-L/R) and ´ (VIDEO) connectors are used

for equipment, such as a camcorder, video disc player, or

video game device.

To view television channels correctly, a signal must be

received by the set from one of the sources: an outdoor

aerial, cable television network, or satellite network.

If you are using an indoor aerial, you may need to adjust it

when tuning your television until you obtain a picture that is

both sharp and clear.

Œ Input source selection

´ On-screen menu display

ˇ Volume adjustment

¨ Channel selection

ˆ Standby indicator

Ø Remote control sensor

∏ Power on/off

Connecting to the S-VIDEO Input

The ˇ (S-VIDEO) and Œ (AUDIO-L/R) connectors are used

for equipment with an S-Video output, such as a camcorder

or VCR.

Connecting to the SCART Input/Output

Connecting Headphones

The SCART´ and SCARTˇ connectors are used for

equipment, such as a VCR, DVD, decoder, satellite receiver,

video game device, or video disc player.

The SCART´ is also used for equipment with an RGB

output, such as a video game device or video disc player.

The ¨ (headphone) jack is used for watching a television

programme without disturbing the other people in the room.

Prolonged use of headphones at a high volume may damage

your hearing.

◆ You can use the ¨ buttons to switch the TV on when it is

in standby mode depending on the model.

◆ The ˇ and ¨ buttons also have the same function as the

œ/√/…/† buttons on the remote control.

◆ If the remote control no longer works or you have

misplaced it, you can use the controls on the panel of the

television.

When both the front (or side) AV and rear connectors

are connected to external equipment, the front (or

side) AV receives priority.

➢

continued...

AA68-03628A-00

English - 1

Check antenna input

Enter Exit

Enjoy your watching

Select the appropriated

language by pressing the …

or † button. Press the

ENTER button.

When you have finished,

press the MENU button.

Viewing the Menus

The Enjoy your watchingis displayed, and then the

channel which has been stored will be activated.

Press the MENU button.

The main menu is displayed on the screen. Its left side

has five icons: Input, Picture, Sound, Channel, and

Setup.

The Check antenna inputis displayed.

Setup

If any language is not selected, the language menu

will disappear about 30 seconds later.

Re-setting the Plug & Play

Method: MENU ➜ …/†

(Setup) ➜ ENTER ➜ …/†

(Plug & Play) ➜ ENTER

➢

Plug & Play

Language

√

: English

Time

√

Press the … or † button to select one of the icons.

Press the ENTER button to access the icon’s sub-menu.

Make sure that the antenna

is connected to the

television (refer to page 1).

Press the ENTER button.

The Auto Storemenu is

displayed with Area

selected.

Child Lock

Blue Screen

Melody

Auto Store

: Off

: On

ASIA W/EUROPE

: Belgie

Area

√

CIS E/EUROPE

CHINA

Demonstration

HONGKONG U/K

AUSTRALIA

NZ/INDONESIA

SOUTH AFRICA

AMERICA

Press the … or † button to move to items in the menu.

Press the ENTER button to enter items in the menu.

Move

Enter

Return

Move

Enter

Return

Press the …/†/œ/√ button to change the selected

items. Press the MENU button to return to the previous

menu.

Press the ENTER button again.

Press the … or † button to select your area. Press the

Press the EXIT button to exit from the menu.

ENTER button.

To search the channels,

select Searchby pressing

the … or † button. Press

Start

Input -

Enter

Return

the ENTER button.

Source List / Edit Name

P 1 C-- -----

Press the ENTER button

again to start search

channels. To stop the

search, press the ENTER

button.

102MHz

Source List

----

◆ Source List

Stop

You can switch between

viewing signal from

AV1

Enter

Return

Time

AV2

S-Video

Component

Setup - Plug & Play

connected equipment, such

as a VCR, DVD, set-top box,

and the TV source

When the channel

--:--

Clock

When the television is initially powered on, several basic

customer settings proceed automatically and subsequently.

The following settings are available.

Sleep Timer

On Timer

: Off

searching has finished, the

Timemenu is displayed

with Clockselected.

--:--

On Timer Volume

am Off

Move

Enter

Return

Off Timer

(broadcast or cable).

You can change the required external source simply

by pressing the VIDEO button on the remote

control. It might take a short period of time for

pictures to be switched. To return to the TV mode,

press the TV button on the remote control.

➢

Press the œ or √ button to

move to the hour or minute.

Plug & Play

If the television is in standby

mode, press the POWER

button on the remote

control.

The Plug & Playis

displayed. It flickers for a

little while, and then

Languagemenu is

displayed.

Move

Enter

Return

Language

English

Set the hour or minute by pressing the … or † button.

Français

Türkçe

◆ Edit Name

Edit Name

continued...

----

You can give a name to the

external source.

AV1

: Belgie

VCR

√

AV2

DVD

Cable STB

S-Video

Component

Move

Enter

Sat. STB

AV Recv.

DVD Recv.

Game

Camcorder

DVD Combo

continued...

Move

Enter

Return

English - 3

Channel - Manual Store

Channel - Add/Delete

Channel - Auto Store

Manual Store

: P 3

Add/Delete

You can store channels,

You can exclude channels you

have chosen from the channels

you scanned. When you scan

through the stored channels,

those you have chosen to skip

are not displayed. All of the

channels that you did not

You can scan for the frequency ranges available to you (and

availability depends on your country). Automatically allocated

programme numbers may not correspond to actual or

desired programme numbers. However you can sort

numbers manually and clear any channels you do not wish

to watch.

Programme

P 1 : Added

P 2 : Added

P 3 : Added

P 4 : Added

P 5 : Added

including those received via

cable networks. When storing

channels manually, you can

choose:

Color System : AUTO

Sound System : BG

√

Channel

Store

: 46MHz

: C 1

Whether or not to store each

of the channels found

Move

Adjust

Return

Move

Enter

Return

The programme number of each stored channel which

you wish to identify

specifically choose to skip are displayed during scanning.

Auto Store

Channels are sorted and stored

in the order which reflects their

position in the frequency range

(with lowest first and highest

last). The programme originally

selected is then displayed.

ASIA W/EUROPE

: Belgie

Area

√

CIS E/EUROPE

CHINA

Select Addedor Deletedby pressing the ENTER button

repeatedly.

HONGKONG U/K

AUSTRALIA

NZ/INDONESIA

SOUTH AFRICA

AMERICA

◆ Programme (Programme number to be assigned to a

channel)

◆ Color System: AUTO/PAL/SECAM/NT4.43/NT3.58

◆ Sound System: BG/DK/I/M

◆ Search (When you do not know the channel numbers):

The tuner scans the frequency range until the first

channel or the channel that you selected is received on

the screen.

Move

Enter

Return

To stop the search before it

has finished, press the

MENU button.

➢

P 1 C-- -----

102MHz

When finished, the Sortmenu

is displayed. To sort the stored

channels into the desired

Stop

Enter

Return

◆ Channel (When you know the number of the channel to

be stored)

numerical order, refer to “Channel - Sort”. To exit without

You can also select the channel number directly by

sorting, press the EXIT button.

➢

pressing the numeric buttons (0~9).

◆ Store (When you store the channel and associated

programme number)

Channel - LNA

If there is no sound or abnormal sound, re-select the

sound standard required.

➢

Channel

This function is very useful in the

situation that the TV is used in

weak signal. LNAamplifies the

TV signal in the weak signal

area, but not noise.

Auto Store

Manual Store

Add/Delete

Sort

√

Channel mode

☛

Off

LNA

◆ P (Programme mode): When completing tuning, the

broadcasting stations in your area have been

assigned to position numbers from P00 to P99. You

can select a channel by entering the position number

in this mode.

Channel - Sort

Move

Enter

Return

Sort

This operation allows you to

change the programme numbers

of stored channels. This

operation may be necessary

after using auto store.

◆ LNA(Low Noise Amplifier) setting is to be made for

From

Store

: P 1

: P--

each channel.

◆ C (Real channel mode): You can select a channel by

entering the assigned number for each air

broadcasting station in this mode.

◆ S (Cable channel mode): You can select a channel by

entering the assigned number for each cable channel

in this mode.

◆

If the picture is noisy with the LNAset to On, select Off.

Depending on areas, factory mode of LNAwill be set up

as Onor Off.

Move

Adjust

Return

◆ From: Channel number to

be changed.

◆ To: New channel number to be identified.

◆ Store: Confirmation the exchange of channel numbers.

English - 4

Setup -Time

Setup - Child Lock

Setup -

Language / Blue Screen /

Melody / Demonstration

Time

Child Lock

◆ Clock

This feature allows you to

prevent unauthorized users,

such as children, from watching

unsuitable programmes by

muting out video and audio.

Child Lock cannot be released

using front (or side) panel

--:--

Clock

Child Lock

Programme

Lock

: On

√

You can set the television

clock so that the current time

is displayed when pressing

the INFO button on the

remote control. You must

also set the time if you wish

Sleep Timer

On Timer

Off Timer

: Off

: P 1

--:--

On Timer Volume

am Off

Setup

◆ Language

Plug & Play

Language

√

It is variable depending on

the model. When you start

using the television for the

first time, you must select the

language which will be used

for displaying menus and

indications.

: English

Time

√

Move

Enter

Return

Move

Enter

Return

Child Lock

Blue Screen

Melody

: Off

: On

to use the automatic on or off timers.

When pressing the button (On/Off) on the front

buttons. Only remote control can release the Child Lock

setting, so keep the remote control away from children.

Demonstration

➢

Move

Enter

Exit

(or side) of the television, the clock setting will be

reset.

◆ Child Lock: On/Off

If you want to unlock a channel, set to Off.

◆ Programme: Channel number to be locked.

◆ Sleep Timer

◆ Blue Screen

You can select a time period of between 30 and 180

minutes after which the television automatically switches

to standby mode.

◆ Lock: When press the ENTER button, the Lockedis

If no signal is being received or the signal is very weak, a

blue screen automatically replaces the noisy picture

background. If you wish to continue viewing the poor

picture, you must set the Blue Screento Off.

displayed.

You can select these options simply by pressing the

If any channel is locked, you can not enter the

➢

SLEEP button on the remote control. If the sleep

timer is not yet set, Offis displayed. If it is already

set, the remaining time before which the television

switches to standby mode is displayed.

Channelmenu by using the control buttons on the

television, and the Not availableis displayed. You

can access by using the remote control only.

◆ Melody

You can hear melody sound when the television is

powered on or off.

◆ On Timer / Off Timer

◆ Demonstration

You can set the On/Off timers so that the television will

switch on or off automatically at the time you select.

To become familiar with the various menus provided by

the television, you can view the in built demonstration.

Each of the menu options is displayed in turn. To exit

from the demonstration, press the EXIT button.

You must set the clock first.

☛

◆ On Timer Volume

The preferred volume can be set for when the timer

automatically turns on the television.

Auto Power Off

☛

When you set the timer “On”, the television will

eventually turn off, if no controls are operated for 3

hours after the TV was turned on by timer. This function

is only available in timer “On” mode and prevents

overheating or leakages, which may occur if a TV is on

for too long (on holiday, for example).

English - 5

◆ Auto Volume

◆ DNIe Jr (Digital Natural Image engine Junior)

(depending on the model)

Picture -

Each broadcasting station has its own signal conditions,

and so it is not easy to adjust the volume every time the

channel is changed. This feature lets you automatically

adjust the volume of the desired channel by lowering the

sound output when the modulation signal is high or by

raising the sound output when the modulation signal is

low.

This feature bring you more detailed image with detail

enhancement, contrast enhancement and white

enhancement. New image compensation algorithm gives

brighter, clearer, much detailed image to you. DNIe Jr

technology will fit every signals into your eyes.

Mode / Custom /

ColorTone / Size /

Digital NR / DNIe Jr /Tilt

Picture

: Dynamic

◆ Mode: Dynamic/

◆ Tilt(depending on the model)

Mode

√

Standard/Movie/Custom

You can select the type of

picture which best

Custom

Color Tone

Size

◆ Pseudo Stereo

If you find that the picture received is slightly tilted to one

side, you can adjust the tilt setting (-7 to +7).

: Normal

: Off

: On

: 0

This feature converts a monaural sound signal into two

identical left and right channels. Once the Pseudo

Stereois set to Onor Off, these settings apply to the

sound effects such as Standard, Music, Movie, and

Speech.

Digital NR

DNIe Jr

Tilt

corresponds to your viewing

requirements.

Move

Enter

Exit

You can select these

➢

options simply by pressing the P.MODE button on

the remote control.

◆ Turbo Plus

This feature suitably emphasizes both higher and lower

bands of sound (and includes other effects). You can

enjoy more magnificent and dynamic sound when

watching music, movie, or other channels.

◆ Custom: Contrast/Brightness/Sharpness/

Color/Tint(NTSC only)

The television has several settings which allow you to

control the picture quality.

Sound -

You can change the options simply by pressing the

➢

If you make any changes to these settings, the

picture mode is automatically switched to Custom.

➢

Mode / Equalizer /

Auto Volume / Pseudo Stereo /

Turbo Plus

TURBO button on the remote control.

◆ Color Tone: Cool2/Cool1/Normal/Warm1/

Warm2

Sound

◆ Mode: Standard/Music

/Movie/Speech/Custom

You can select the type of

special sound effect to be

used when watching a given

broadcast.

◆ Size

Mode

: Custom

√

You can select the picture size which best corresponds to

your viewing requirements. It is variable depending on

the model.

Equalizer

Auto Volume

: Off

Pseudo Stereo : Off

Turbo Plus

: Off

You can change the picture size simply by pressing

the P.SIZE button on the remote control.

➢

Move

Enter

Exit

You can select these

➢

options simply by pressing the S.MODE button on

◆ Digital NR

the remote control.

If the signal received by the television is weak, you can

activate this feature to reduce any static and ghosting

that may appear on the screen.

◆ Equalizer

The television has several settings which allow you to

control the sound quality.

continued...

If you make any changes to these settings, the

sound mode is automatically switched to Custom.

➢

continued...

English - 6

(sub-page)

Teletext Feature_{(depending on the model)}

Troubleshooting

Used to display the available sub-page.

Most television stations provide written information services

via teletext. The index page of the teletext service gives you

information on how to use the service. In addition, you can

select various options to suit your requirements by using the

remote control buttons.

Before contacting the Samsung after-sales service, perform

the following simple checks. If you cannot solve the problem

using the instructions below, note the model and serial

number of the television and contact your local dealer.

(teletext on/mix)

Press to activate teletext mode after selecting the

channel providing the teletext service. Press it again to

overlap the teletext with the current broadcasting screen.

ˆ Coloured buttons (red/green/yellow/blue)

If the FASTEXT system is used by a broadcasting

company, the different topics covered on a teletext page

are color-coded and can be selected by pressing the

coloured buttons. Press one of them corresponding to the

required. The page is displayed with other coloured

information that can be selected in the same way. To

display the previous or next page, press the

No sound or picture

For teletext information to be displayed correctly,

☛

◆ Check that the mains lead has been connected to a

wall socket.

channel reception must be stable. Otherwise,

information may be missing or some pages may not be

displayed.

◆ Check that you have pressed the

button (On/Off)

and the POWER button.

◆ Check the picture contrast and brightness settings.

◆ Check the volume.

Normal picture but no sound

◆ Check the volume.

◆ Check whether the volume MUTE button on the

remote control has been pressed.

corresponding coloured button.

∏

(page up)

Used to display the next teletext page.

(mode)

No picture or black and white picture

◆ Adjust the color settings.

◆ Check that the broadcast system selected is correct.

Press to select the teletext mode (LIST/FLOF). If you

press it in the LIST mode, it switches into the List save

mode. In the List save mode, you can save teletext page

into list using the

(store) button.

Sound and picture interference

◆ Try to identify the electrical appliance that is affecting

the television, then move it further away.

◆ Plug the television into a different mains socket.

”

’

(page down)

Used to display the previous teletext page.

(reveal)

Used to display the hidden text (answers to quiz games,

for example). To display normal screen, press it again.

Blurred or snowy picture, distorted sound

◆ Check the direction, location and connections of your

aerial.

(size)

This interference often occurs due to the use of an

indoor aerial.

Press to display the double-size letters in the upper half

of the screen. For lower half of the screen, press it again.

To display normal screen, press it once again.

Remote control malfunctions

◆ Replace the remote control batteries.

◆ Clean the upper edge of the remote control

(transmission window).

◆ Check that the “+” and “-” ends of the batteries are

inserted correctly.

◆ Check that the batteries are drained.

(hold)

(store)

Used to hold the display on a given page if the selected

page is linked with several secondary pages which follow

on automatically. To resume, press it again.

Used to store the teletext pages.

(index)

Used to display the index (contents) page at any time

while you are viewing teletext.

English - 7

OSD Map

✽ : It is variable depending on the model.

Input

Source List

Edit Name

✽

VCR / DVD / Cable STB / Sat. STB / AV Recv. / DVD Recv. / Game /

Camcorder / DVD Combo

Picture

Mode

Dynamic / Standard / Movie / Custom

Contrast / Brightness / Sharpness / Colour / Tint (NTSC only)

Cool2 / Cool1 / Normal / Warm1 / Warm2

Custom

Colour Tone

Size

✽

Digital NR

DNIe Jr

Tilt

Off / On

Sound

Mode

Standard / Music / Movie / Speech / Custom

Equalizer

Auto Volume

Pseudo Stereo

Turbo Plus

Off / On

Channel

Auto Store

Area

✽

ASIA W/EUROPE / CIS E/EUROPE / CHINA /

HONGKONG U/K /AUSTRALIA / NZ/INDONESIA

SOUTH AFRICA / AMERICA

Programme

Color System

Sound System

Channel

Store

Manual Store

✽

AUTO / PAL / SECAM / NT4.43 / NT3.58

BG / DK / I / M

Add/Delete

Sort

LNA

Off / On

Setup

Plug & Play

Language

Time

✽

Clock

Sleep Timer

On Timer

Off Timer

On Timer Volume

Off / On

Child Lock

Blue Screen

Melody

Demonstration

English - 8

Quantum Wheelchair Q6 Edge HD User Guide
Radio Shack Network Card 273 316 User Guide
RCA Cooktop S2202 User Guide
Realistic Satellite Radio Pro 38 User Guide
Roland Musical Instrument PCR 30 User Guide
Rotel Stereo Receiver RCD 971 User Guide
Rubbermaid Outdoor Storage 3673 User Guide
Samsung Cell Phone Accessories GT S7582 User Guide
Sanyo Battery Charger CR17450E R User Guide
Sears Water System CWF User Guide