Samsung CD Player MXF630BZA User Guide

MX-F630B  
MX-F730B  
MINI-Compact System  
MP3-CD/WMA-CD/CD-R/RW Playback  
user manual  
Imagine the possibilities  
Thank you for purchasing this Samsung product.  
To receive more complete service,  
please register your product at  
 
Important Safety Instructions  
1).  
Read these instructions.  
2).  
3).  
4).  
5).  
6).  
7).  
8).  
Keep these Instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near water.  
Clean only with dry cloth.  
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.  
Do not install near any heat sources such as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9).  
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two  
blades with one wider than the other. A grounding type plug has two blades and a third grounding  
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit  
into your outlet, consult an electrician for replacement of the obsolete outlet.  
10). Protect the power cord from being walked on or pinched particularly at plugs, near wall outlets, and the  
point where they exit from the apparatus.  
11). Only use attachments and accessories specified by the manufacturer.  
12). Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use caution when  
moving the cart/apparatus combination to avoid injury from tip-over.  
13). Unplug this apparatus during lightning storms or when unused for long periods of  
time.  
14). Refer all servicing to qualified service personnel. Servicing is required when the  
apparatus has been damaged in any way, such as when the power supply cord or plug is damaged,  
liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain  
or moisture, does not operate normally, or has been dropped.  
Accessories  
Check for the supplied accessories below.  
FM Antenna  
User's Manual  
Remote Control/Batteries  
(AH42-00021A)  
(AH68-02604M)  
(AH59-02554A/4301-000116)  
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product  
appearance.  
English  
3
 
Precautions  
Ensure that the AC power in your house matches the  
requirements listed on the identification sticker located on  
the back of your product.  
Do not place the product on amplifiers or other equipment  
which may become hot. Make sure the ventilation slots are  
not covered.  
Do not stack anything on top of the product.  
Before moving the product, ensure the Disc Insert Hole is  
empty.  
Disc Storage  
Do not keep in direct sunlight.  
Keep in a cool, ventilated area.  
Keep in a clean, protective jacket.  
Store vertically.  
Do not allow the discs to become contaminated with dirt.  
Do not use cracked or scratched discs.  
To turn off the product completely, disconnect the AC plug  
from the wall outlet. Disconnect the AC plug from the wall  
outlet if you will leave the device unused for a long period  
of time.  
During thunderstorms, disconnect the AC plug from the wall  
outlet. Voltage peaks due to lightning could damage the  
product.  
Do not expose the product to direct sunlight or other heat  
sources. This could cause the product to overheat and  
malfunction.  
Protect the product from moisture and excess heat and  
equipment creating strong magnetic or electric fields (i.e.  
speakers.).  
Handling and Storing Discs  
If you get fingerprints or dirt on a disc, clean it with a mild  
detergent diluted in water and wipe with a soft cloth.  
When cleaning, wipe gently from the inside to the outside of  
the disc  
Condensation may form if warm air comes into contact  
with cold parts inside the product. When condensation  
forms inside the product, it may not operate correctly. If this  
occurs, remove the disc and let the product stand for 1 or 2  
hours with the power on.  
Disc Types And Disc Format  
Disconnect the power cable from the AC supply if the  
product malfunctions.  
This product is for personal use only. It is not intended for  
industrial use.  
This product does not support Secure (DRM) Media files.  
CD-R Discs  
Condensation may occur if your product or a disc has been  
stored in cold temperatures. If transporting the product  
during the winter, wait approximately 2 hours until the  
product has reached room temperature before using.  
The batteries used with this product contain chemicals  
that are harmful to the environment. Do not dispose of  
batteries in the general household trash.  
Maintain an open space of approximately 6 inches (15 cm)  
on the sides and rear of the system, for ventilation purposes.  
Place the loudspeakers at a reasonable distance on either  
side of the system to ensure good stereo sound.  
Direct the loudspeakers towards the listening area.  
Some CD-R discs may not be playable depending on  
the disc recording device (CD-Recorder or PC) and the  
condition of the disc.  
Use 650MB/74 minute CD-R discs.  
Do not use CD-R discs over 700MB/80 minutes as they  
may not be played back.  
Some CD-RW (Rewritable) media, may not be playable.  
Only CD-Rs that are properly "closed" can be fully played. If  
the session is closed but the disc is left open, you may not  
be able to fully play the disc.  
CD-R MP3 Discs  
Only CD-R discs with MP3 files in ISO 9660 or Joliet format  
can be played.  
MP3 file names should contain no blank spaces or special  
characters (. / = +).  
Use discs recorded with a compression/decompression  
data rate greater than 128Kbps.  
Only files with the ".mp3" and ".MP3" extensions can be  
played.  
Only consecutively written multisession discs can be  
played. If there is a blank segment in a Multisession disc,  
the disc can be played only up to the blank segment.  
If a disc is not closed, it will take longer to begin playback  
and not all of the recorded files may be played.  
For files encoded in Variable Bitrate (VBR) format, i.e. files  
encoded in both low Bitrate and high Bitrate (e.g., 32Kbps  
~ 320Kbps), the sound may skip during playback.  
A maximum of 999 tracks can be played per CD.  
Supported Audio Formats:WMA 56~128kbps Bitrate.  
Cautions on Handling and Storing Discs  
Small scratches on the disc may reduce sound and picture  
quality or cause skipping.  
Be especially careful not to scratch discs when handling  
them.  
Holding discs  
Do not touch the playback side of the disc.  
Hold the disc by the edges so that fingerprints will not get  
on the surface.  
Do not stick paper or tape on the disc.  
4
English  
 
Contents  
Thank you for buying this SAMSUNG mini-compact system.  
Please take time to read these instructions.  
They will allow you to operate your system with ease and take full advantage of its features.  
Safety Warnings....................................... 2  
Important Safety Instructions.................. 3  
Accessories.............................................. 3  
Precautions .............................................. 4  
Cautions on Handling and  
Using Bluetooth .....................................12  
Setting the Clock....................................13  
Timer Function .......................................13  
Cancelling the Timer..............................13  
Listening to Radio..................................14  
Selecting a Stored Station.....................14  
Recording Function ...............................14  
Recording Speed...................................15  
Selecting EQ Mode...............................15  
Selecting LOCAL EQ Mode..................15  
GIGA SOUND function...........................15  
Using the FOOTBALL MODE ................15  
Connecting a Microphone.....................16  
Troubleshooting .....................................16  
Specifications.........................................17  
Storing Discs............................................ 4  
Disc Types And Disc Format................... 4  
Contents................................................... 5  
Description............................................... 6  
Front Panel.......................................... 6  
Rear Panel........................................... 7  
Remote Control .................................. 8  
Display function ....................................... 8  
CD/MP3/WMA-CD Playback .................. 9  
Selecting a Track...................................... 9  
Searching for a Specific Music  
Passage on a CD ..................................... 9  
Repeat One or All Tracks on a  
Compact Disc........................................... 9  
A-B Repeat Playback ............................10  
10 Skip Function ....................................10  
CD Programming ...................................10  
Checking or Editing the  
Programmed Tracks ..............................10  
Auto Change Function...........................10  
Playing a USB Device............................11  
To Select a Track from  
a USB Device....................................11  
To Search a Folder Quickly..............11  
To Use High Speed Search..............11  
To repeat ...........................................11  
To delete a file...................................11  
To skip 10 tracks...............................11  
Symbols  
Important  
Note  
English  
5
 
Description  
Front Panel  
1
2
3
21  
20  
19  
4
18  
17  
16  
5
6
7
15  
14  
13  
12  
8
9
10  
11  
1. POWER button  
16. PLAY/PAUSE button  
17. Search/Skip button  
18. VOLUME Control  
• Press this button to switch your mini-compact  
system on and off.  
19. LOCAL EQ button  
20. FOOTBALL MODE button  
21. GIGA SOUND BLAST button  
2. AUTO CHANGE button  
3. EQ button  
4. Window Display  
5. Search/Skip button  
6. STOP/Tuning Mode button  
7. USB/BLUETOOTH button  
8. MP3/CD button  
9. TUNER/AUX button  
10. MIC jack  
11. Disc Tray  
12. USB jack  
13. USB REC button  
14. DELETE button  
15. OPEN/CLOSE button  
6
English  
 
Rear Panel  
1
2
3
4
1. 2.0 CH Speaker Connector Terminals  
for more than 8 hours, the power will  
automatically turn off.  
The speaker connector terminals are located on  
the rear of the system.  
4. FM Antenna Connector Terminal  
To achieve the correct sound quality, insert the  
speaker connector cables identified below into  
the correct speaker terminals on the back of  
the system.  
1.  
Connect the FM antenna (supplied) to the FM  
Antenna jack.  
Slowly move the antenna wire until you find a  
location where reception is good, then fasten it  
to a wall or other rigid surface.  
If reception is poor, you may need to install an out-  
door antenna. To do so, connect an outdoor FM  
antenna to the FM socket on the rear of the system  
using a 75Ω coaxial cable (not supplied).  
1.  
2.  
• Left speaker (marked L).  
• Right speaker (marked R).  
3.  
2. ONLY FOR SERVICE  
• This jack is for service only. Please do not use.  
3. AUX IN Terminals  
Use an Audio Cable (not supplied) to connect  
AUX IN on the product to Audio Out on an  
external analog component.  
1.  
• Be sure to match connector colors.  
• If the external analog component has only one  
Audio Out jack, connect to either the left or  
right terminal.  
• Press the TUNER/AUX button to select the  
AUX input.  
• When the unit is in AUX mode, if none of  
the buttons on the front panel are pushed  
English  
7
 
Remote Control  
1. POWER  
2. TUNER/AUX  
3. USB  
20. USB REC  
21. DELETE  
22. CD REC SPEED,  
MO/ST  
33  
32  
1
4. Number(0~9) button  
TUNER/AUX  
2
3
During playback,  
23. VOLUME +  
31  
press the desired track  
number. The selected  
track is played.  
24.  
,
TUNING/ALBUM  
25. EQ  
4
26. AUTO CHANGE  
27. REPEAT A-B  
28. PAUSE  
29. SEARCH  
30. +10  
5. -10  
6. Skip  
5
6
30  
29  
7. STOP  
8. PLAY  
9. REPEAT  
10. GIGA  
11. ENTER  
12. VOLUME -  
13. TUNING/ALBUM  
14. TUNING MODE  
15. TIMER ON/OFF  
16. TIMER SET  
7
8
9
31. CD  
32. DISPLAY  
33. MUTE  
28  
27  
26  
25  
24  
Turn off the sound  
temporarily.  
10  
.
11  
12  
13  
14  
15  
16  
17  
18  
23  
22  
21  
20  
17. SLEEP  
Set a sleep time to  
shut off the product.  
19  
18. MY KARAOKE  
19. MIC VOLUME -, +  
Installing batteries in the Remote  
Control  
Display function  
Lets you view all functions available on the display  
and adjust the brightness of the display.  
`
Match the “+” and “–” ends of the batteries with the diagram  
inside the battery compartment.  
`
`
`
Always replace both batteries at the same time.  
Do not expose the batteries to heat or a flame.  
The remote control can be used up to approximately 23 feet  
(7 meters) in a straight line from the system.  
Each time you press the DISPLAY button on the  
remote control, the display mode will change as fol-  
lows:  
The Demo function  
All functions available on the system appear on the  
front panel display.  
The Dimmer function  
The Dimmer function is selected and the display  
darkens.  
Display ON  
The Display turns on.  
Clock ON  
The Clock you set is displayed.  
* Battery size: AAA  
8
English  
 
CD/MP3/WMA-CD Playback  
Selecting a Track  
Lets you play 5 inch compact discs without an adapter.  
You can select a desired track while a disc is  
being played  
.
This product is designed to play audio CDs, CDs,  
To play the previous track  
Press the [ button within 3 seconds after the current  
track starts playing.  
Press the [ button twice, 3 seconds or more after  
CD-Rs, CD-RWs, or MP3/WMA-CDs.  
Gently open or close the CD tray. Do not apply  
excessive force.  
Do not apply force to or place a heavy object on the  
product.  
Do not insert an out-of-spec. shaped CD such as a  
heart or octangle shaped CD. You can damage the  
product.  
the current track starts playing.  
To play the next track  
]
Press the  
button.  
To play the current track from the beginning  
Press the [ button once, 3 seconds after the current  
track starts playing.  
For the best sound, maintain your compact discs  
carefully and correctly.  
To play the track of your choice  
1. Press the OPEN/CLOSE button to open the disc tray.  
2. Place a disc gently into the tray with the disc's label  
facing up.  
3. Press the OPEN/CLOSE button to close the disc tray.  
The disc will be played automatically.  
[
]
Press the  
or  
use the Number (0~9) buttons on  
the remote control to select a track.  
button to move to a desired track.  
You can also  
For MP3/WMA-CD audio, it may take several minutes  
to finish scanning the disc tracks.  
Searching for a Specific Music  
Passage on a CD  
If you play a file with an English name or a MP3/WMA-  
CD medium with an English title, the song title will be  
shown in the display. (Other languages besides English  
may not be displayed.)  
An English-titled track containing a special character  
will not display.  
When listening to a compact disc, you can quick-  
ly search for a specific music passage on a track.  
To search  
Forwards  
Backwards  
Press ...  
)
<CD/MP3/WMA-CD Playback Display>  
Playtime Indicator  
Track Indicator  
(
You can also press and hold the  
[
or  
]
button on  
4. Adjust the volume by:  
the main unit to automatically scan for a track.  
Tuning the VOLUME knob on the unit OR  
Pressing the Vol + or – button of the remote control.  
The volume level can be adjust in 31 steps (VOLUME  
MIN, VOLUME 01 - VOLUME 29, and VOLUME MAX).  
Repeat One or All Tracks on a  
Compact Disc  
5. Main Unit  
To pause playback temporarily, press the p button.  
You can play a CD, a group of tracks in a folder  
(MP3 only), or a single track repeatedly:  
Press p again to continue playing the disc.  
Remote control  
To pause playback temporarily, press the PAUSE(#)  
button.  
Press the PLAY(+) button to continue playing the disc.  
1. Press the REPEAT button.  
Each time you press the REPEAT button, the  
repeat mode will change as follows:  
6. To end playing, press the STOP (@) button.  
If there is no CD inserted in the DISC tray, the unit displays “NO  
MP3: OFF TRACK DIR ALL RANDOM  
CD: OFF TRACK ALL RANDOM  
DISC”.  
The quality of MP3/WMA-CD playback may vary depending  
on the condition of the disc containing the music files or the  
condition of the recorder with which the disc was created.  
If different types of files or unnecessary folders are on the same  
disc, you will have problems with playback.  
Keep the tray closed whenever you are not using it to prevent  
dust from entering.  
You can load or unload a compact disc when the radio, USB or  
auxiliary source function is selected. Also, when you press the  
OPEN/CLOSE button, the product will automatically change to  
the MP3/CD mode.  
If no buttons are pressed on the product or remote control for  
more than 3 minutes when the product is in Pause mode, the  
product will change to Stop mode.  
2. When you want to stop the Repeat function,  
press the REPEAT button until "OFF" is  
displayed.  
OFF: Cancels Repeat Playback.  
TRACK: Repeatedly plays the selected track.  
DIR: Repeatedly plays all tracks in the selected  
folder.  
ALL: Repeatedly plays the entire disc.  
If no buttons are pressed on the product or remote control for  
more than 25 minutes when the product is in Stop mode or no  
Disc mode, the power will automatically turn off.  
RANDOM: Plays tracks in random order.  
English  
9
 
Checking or Editing the  
Programmed Tracks  
You can check a list of programmed tracks and  
edit them as you want.  
A-B Repeat Playback  
You can repeatedly play back a designated section  
of a CD.  
1. Press the REPEAT A-B button at the beginning  
of desired part.  
'RPT A' will be displayed.  
1. If a programmed track is being played, press the  
2. Press the REPEAT A-B button at the ending of  
desired part.  
'RPT AB' will be displayed.  
3. To cancel REPEAT A-B function, press the  
REPEAT A-B button again.  
STOP (@) button once.  
2. Press the ENTER  
(
)
button twice to display  
the message below:  
(C=Check, 01= program number)  
'OFF' will be displayed.  
If a total of 24 tracks are already pro-  
grammed, “C” will be displayed rather  
than “P” in the display.  
REPEAT A-B function is available only within a  
track.  
10 Skip Function  
3. Press the ENTER  
(
)
button repeatedly until  
Press the +10 or -10 button while in playback mode.  
The unit will skip as many as 10 tracks forward or  
10 tracks back from the current track.  
the desired track is displayed.  
4. Press the  
[
or  
]
button to select a different  
button to confirm your  
track.  
5. Press the ENTER  
(
)
CD Programming  
selection.  
This function is not available during playback of an  
MP3/WMA-CD.  
You can program the playback order of up to 24  
tracks of your choice.  
6. To play the programmed tracks, press the  
PLAY ( ) button.  
+
Auto Change Function  
However, you must stop playing the CD before  
selecting tracks.  
You can play a disc followed by a USB continuously.  
1. Press the AUTO CHANGE button.  
Each time you press this button, the mode will  
switch as follows:  
1. While in CD playback mode, press the STOP(@  
)
button to stop playing the CD.  
2. Press the ENTER  
(
)
button to display the  
;
AUTO CHANGE ON  
AUTO CHANGE OFF  
message below:  
When the auto change mode is "ON", the unit will play  
the Disc ; USB continuously.  
(01= program number, --= track number)  
When the auto change mode is "ON", if you press  
the POWER button, FUNCTION button, or the  
OPEN/CLOSE button, the auto change function  
automatically switches to "OFF" mode.  
When the USB is playing, if you disconnected the  
USB, the auto change function automatically switches  
to "OFF" mode.  
When the auto change mode is "ON", the unit cannot  
record.  
When the auto change mode is "ON", the REPEAT  
and SLEEP functions automatically change to OFF.  
When the auto change mode is "ON", the CD REC  
SPEED, USB REC, REPEAT, PROGRAM, DELETE  
and SLEEP functions do not work, and the unit  
displays "AUTO CHANGE ON".  
When the DISC play ends, if there's no USB, the unit  
will continue to play the disc.  
3. Use the  
[
or  
]
button to move to a desired  
track.  
Press  
Press  
[
]
to move to the previous track.  
to move to the next track.  
4. Press the ENTER  
(
)
button to confirm your  
selection, the selection is stored and  
is displayed.  
5. To select additional tracks, follow Steps 3  
to 4 above.  
6. Press the PLAY (+) button to play the  
programmed tracks.  
7. Press the STOP(@) button to stop playing the  
programmed tracks, Press the STOP (@) button  
again to cancel playing the programmed tracks.  
If you open the disc tray or turn off the  
product, your programming will be canceled.  
When the USB play ends, if there's no DISC, the unit  
will continue to play music from the USB.  
In CD Program mode, if you press the USB REC  
or the AUTO CHANGE buttons, these functions  
will not work, and the unit will display "PROG".  
10  
English  
 
Playing a USB Device  
Connect an external storage device such as a USB  
flash memory or external HDD (Hard Disk Drive)  
to the product. You can play files in MP3/WMA  
format.  
To delete a file  
You can delete a file on your USB device.  
Play a file you want to delete.  
1.  
Press the DELETE button.  
2.  
3.  
Before you begin!  
Press [ or ] to select YES.  
Connect the external USB storage device to your product.  
Select the USB mode by pressing the USB/BLUETOOTH  
button on the main unit or select USB by pressing the  
USB button on the remote control.  
Press the ENTER button on the remote control or the  
DELETE button.  
4.  
The selected file will be deleted.  
The first track of the first directory plays automatically.  
The NTFS file system is not supported.  
To stop playing  
Press the STOP ( @ ) button to stop playing.  
To skip 10 tracks  
To remove the USB device  
If you press the STOP ( @ ) button once  
again, you can remove the USB device safely.  
Press the +10 or -10 button while in playback mode.  
The unit will skip as many as 10 tracks forward or  
10 tracks back from the current track.  
Do not connect a USB recharger to the USB port  
of this product. You can damage the product.  
Read through the instructions below before using  
a USB device with this unit.  
To Select a Track from a USB Device  
You can select an MP3 file during play.  
Some USB devices may not work properly with this  
product.  
This product only supports external HDD's that are  
formatted in the FAT file system.  
USB 2.0 HDD's should be connected to a separate  
power source. Otherwise, the USB 2.0 HDD's will not  
work.  
If a USB external storage device is connected to multiple  
devices, only the MP3 files in the first HDD will be played.  
DRM-applied files are not supported. Digital Right  
Management restricts unauthorized access to a DRM file  
so that the copyright of the file is protected from piracy.  
Even if the extension of the file is .mp3, the file cannot be  
played if it is formatted in MPEG layer 1 or 2.  
Do not use an unrecognized USB hub.  
Only the first 15 characters of a MP3/WMA file are  
displayed.  
Only removable HDDs with less than 160GB are  
supported. Depending on the device, a 160GB or more  
removable HDD may not be supported.  
It can take several minutes for the product to recognize  
the files on a USB device.  
If you want to move to the previous/next track, press  
the [,] buttons briefly.  
The unit moves to the previous/next file within the  
directory.  
If you press the [,] buttons more times than the  
number of the files in the directory, the unit moves to  
the next directory.  
To Search a Folder Quickly  
1. Press the TUNING/ALBUM button on the remote  
control to move to the previous/next folder.  
2. When the search is done, you will see the previous/  
next folder name. The track will start playing.  
To Use High Speed Search  
You can search the desired section quickly during  
play.  
( )  
, button.  
Press the  
Each time you press the button, you will move  
backward/forward fast.  
The sound will not output in fast playback mode.  
USB devices (particularly, USB HDDs) may cause a  
delay when moving to the next track.  
With USB devices supporting only USB VER. 1.1, the  
unit may access files slowly or may not recognize file  
properties.  
In Stop mode, the product will turn off automatically if  
there is no USB device connected to the USB jack for 25  
minutes.  
To repeat  
1. Press the REPEAT button.  
Each time you press the REPEAT button, the repeat  
mode will change as follows:  
OFF TRACK DIR ALL RANDOM  
2. When you want to stop the Repeat function, press the  
REPEAT button until "OFF" is displayed.  
OFF: Cancels Repeat Playback.  
TRACK: Repeatedly plays the selected track.  
DIR: Repeatedly plays all tracks in the selected folder.  
ALL: Repeatedly plays all tracks.  
RANDOM: Plays tracks in random order.  
English  
11  
 
Using Bluetooth  
Bluetooth device over the Product.  
In Bluetooth mode, some model's Play/Pause/Repeat/  
Stop/Next/Back functions are not available.  
You can use a Bluetooth device to enjoy music with  
high quality stereo sound, all without wires!  
The product only supports Middle Quality SBC data (up  
to 237kbps@48kHz), and does not support High Quality  
SBC data ([email protected]).  
Only one Bluetooth device can be paired at a time.  
The Mini-compact system may not search or connect  
properly in the following cases:  
- If there is a strong electrical field around the Mini-  
compact system.  
- If several Bluetooth devices are simultaneously paired  
with the Mini-compact system.  
- If the Bluetooth device is turned off, not in place, or  
malfunctions  
Note that such devices as microwave ovens, wireless  
LAN adaptors, fluorescent lights, and gas stoves use the  
same frequency range as the Bluetooth device, which  
can cause electric interference.  
What is Bluetooth?  
Bluetooth technology lets Bluetooth-compliant devices  
interconnect easily with each other using a short, wireless  
connection.  
A Bluetooth device may cause noise or malfunction,  
depending on usage, when:  
-
A part of your body comes into contact with the  
receiving/transmitting system of the Bluetooth device or  
the product.  
-
-
It is subject to electrical variation from obstructions  
caused by a wall, corner, or by office partitioning.  
It is exposed to electrical interference from same  
frequency-band devices including medical equipment,  
microwave ovens, and wireless LANs.  
Keep the Mini-compact system and the Bluetooth device  
close together when pairing. The greater the distance  
between the system and Bluetooth device, the worse the  
quality.  
To disconnect the Bluetooth device from the  
Product  
If the distance exceeds the Bluetooth operational range, the  
connection is lost.  
In poor reception-sensitivity areas, the Bluetooth connection  
may not work properly.  
The Mini-compact system has an effective reception range  
of up to 33 feet (10 meters) in all directions if there are no  
obstacles. The connection will be automatically cut off if the  
Bluetooth device moves out of this range. Even within range,  
the sound quality may be degraded by obstacles such as  
walls or doors.  
You can disconnect the Product from the Bluetooth  
device. (Refer to Bluetooth device's user's manual.)  
The Product will be disconnected.  
When the Product is disconnected from the  
Bluetooth device, the Product will display  
"DISCONNECTED" "READY" on the front display.  
This wireless device may cause electric interference during  
its operation.  
To disconnect the Product from the Bluetooth  
device  
To connect the product to a Bluetooth device  
1. Press the USB/BLUETOOTH button on the main unit  
to display the "BT" message.  
Before you begin, confirm that your Bluetooth device  
supports the Bluetooth-compliant stereo headset  
function.  
Except when you disconnect by changing functions,  
the connected Bluetooth device will wait a certain  
amount of time for a response from the product before  
terminating the connection. (Disconnection time may  
differ, depending on the Bluetooth device.)  
1. Press the USB/BLUETOOTH button on the main unit  
to display the "BT" message.  
The currently connected device will be disconnected.  
You will see WAIT” for 2 seconds and then “READY”  
In Bluetooth connection mode, the Bluetooth connection  
will be lost if the distance between the Product and the  
Bluetooth device exceeds the limit (33 ft./10 meters).  
If the distance decreases to the effective range or you  
restart the Bluetooth device, the Bluetooth connection  
can be restored.  
If the Bluetooth device comes back into the effective  
range, you can restart the product to restore the pairing  
with the Bluetooth device.  
With some Bluetooth devices, some functions may not  
work properly.  
In Bluetooth mode, the product will turn off automatically  
if there is no Bluetooth device connected to the product  
for 25 minutes.  
on the display.  
2. Select the Bluetooth menu on the Bluetooth device you  
want to connect. (Refer to the Bluetooth device's user's  
manual.)  
3. Select the Stereo headset menu on the Bluetooth device.  
You will see a list of scanned devices.  
4. Select "[Samsung] MINI XXXXXX " from the  
searched list.  
When the product is connected to the Bluetooth  
device, the Product will display "CONNECTED" "BT"  
on the front display, followed by the device name of the  
connected Bluetooth device.  
5. Play music on the connected device.  
You can listen to the music playing on the connected  
12  
English  
 
b
c
d
Press the ENTER  
(
)
button.  
Setting the Clock  
Result: The minutes flash.  
Press the TUNING/ALBUM , or . button to set  
the minutes.  
During each step, you have a few seconds to set the  
required options. If you exceed this time, you must  
start again.  
Press the ENTER  
(
)
button.  
Result: VOL XX is displayed, where XX corre-  
1. Switch the system on by pressing the POWER  
sponds to the volume already set.  
(
) button.  
6. Press the TUNING/ALBUM , or . button to adjust  
2. Press the TIMER SET button and then press the  
ENTER button, "CLOCK" is displayed.  
3. Press the ENTER button. The hour flashes.  
the volume level and press the ENTER button.  
Result: The source to be selected is displayed.  
(
)
(
)
(
)
7. Press the TUNING/ALBUM , or . button to select  
the desired source to be played when the system  
switches on.  
Increase the hours:  
Decrease the hours:  
,
.
4. When the correct hour is displayed, press the  
ENTER button. The minutes flash.  
Increase the minutes:  
Decrease the minutes:  
You must also...  
If you select...  
(
)
FM (radio)  
a
b
Press the ENTER  
(
)
button.  
,
.
Select a preset station by pressing  
the TUNING/ALBUM , or .  
button.  
5. When the correct minute is displayed, press the  
ENTER  
display.  
(
)
button. " TIME" appears in the  
CD/MP3 (compact disc) Load one compact disc.  
USB  
Connect the USB device.  
The current time is now set.  
You can display the time, even when you are using  
another function, by pressing the TIMER SET button  
once.  
8. Press the ENTER  
Result: CHKREC (Do you want to record?) is displayed.  
button.  
(
)
button.  
9. Press the ENTER  
(
)
You can also use the  
on the front panel  
] or [  
Result: REC N is displayed, you can press the TUN-  
ING/ALBUM , or . button to select the REC Y or  
instead of the TUNING/ALBUM , or . button in  
Steps 3 and 4.  
REC N, and then press ENTER  
(
)
button.  
Timer Function  
If you select the REC N, it will cancel tuner timing  
recording even if you have already set the tuner timing  
recording.  
1)  
The timer enables you to switch the system on or  
off at specific times automatically.  
Before setting the timer, check that the current time  
is correct.  
During each step, you have a few seconds to set  
the required options. If you exceed this time, you  
must start again.  
If you no longer want the system to be switched on  
or off automatically, you must cancel the timer by  
pressing the TIMER ON/OFF button.  
If you select the REC Y, you can set the tuner timing  
recording.  
2)  
a.  
Press the ENTER (  
) button.  
Result: ON is displayed for a few seconds. You can  
set the tuner timing recording switch-on time.  
b.  
Press the ENTER (  
) button.  
Result: OFF is displayed for a few seconds. You can  
set the tuner timing recording switch-off time.  
The maximum tuner timing recording time is 5 hours.  
If the timer switch on and off times are identical, the word ERROR  
is displayed.  
If there is no disc or usb, when you select the “CD, USB, it will  
automatically change to “TUNER”.  
You may use the ], [ buttons on the main unit instead of the  
TUNING/ALBUM , or . button to adjust in Steps 4 through 9.  
If the switch-on or -off time is the same as the timing recording  
time, only the switch-on or -off time is effective, and the timing  
recording time is not applied.  
If the auto timer is turned on, the MP3/CD or USB function may  
require an additional step to be activated depending on the disc (or  
device). It is better for you to select the tuner function instead.  
Example: You want to wake up to music every morning.  
1. Switch the system on by pressing the POWER  
(
)
button.  
2. Press the TIMER SET button until TIME is displayed.  
3. Press the ENTER button.  
(
)
Result: ON is displayed for a few seconds. You can  
set the timer switch-on time.  
4. Set the timer switch-on time.  
a
Press the TUNING/ALBUM , or . button to  
set the hours.  
Cancelling the Timer  
b
Press the ENTER (  
Result: The minutes flash.  
Press the TUNING/ALBUM , or . button to  
set the minutes.  
Press the ENTER (  
) button.  
After you have set the timer, the unit will start auto-  
matically at the time shown by the TIMER indication  
on the display. If you no longer want to use the timer,  
you must cancel it.  
c
d
) button.  
Press the TIMER ON/OFF button....  
To  
Result: OFF is displayed for a few seconds. You can  
Cancel the timer Once. Result:  
Restart the timer Twice. Result:  
is no longer displayed.  
is displayed again.  
now set the timer switch-off time.  
5. Set the timer switch-off time.  
Press the TUNING/ALBUM , or . button to  
set the hours.  
a
When you select the TIMER OFF mode, the TIMER  
RECORDING and TIME function are not available.  
English  
13  
 
Recording Function  
Listening to Radio  
You can record from a CD, radio broadcast, or an  
external source to a USB storage device.  
You can store up to:  
15 FM stations.  
1. Connect an external USB storage device to the  
1. Select FM by pressing the TUNER/AUX button.  
USB (  
) jack on your product.  
2. Play a disc, tune to a station, or connect an  
external source to your product.  
2.  
CD  
To search for  
Press the TUNING MODE button  
a station  
Press the MP3/CD button on the main unit to select  
the CD function.  
Press the OPEN/CLOSE button to open the disc tray.  
Insert a CD and press the OPEN/CLOSE button to  
close the disc tray.  
Use the CD selection ( [ or ] ) buttons to select the  
desired song.  
One or more times until PRESET is  
displayed. You can search the stored  
frequencies in the Preset mode.  
One or more times until MANUAL is  
displayed. You can search the frequen-  
cies one by one in the Manual mode.  
Preset  
Manually  
Tuner  
3. Select the station to be stored by:  
Select TUNER by pressing the TUNER/AUX button.  
Tune to a station you want to record.  
Pressing the TUNING/ALBUM , or . button on the  
remote control to select the preset station.  
Press and hold the TUNING/ALBUM , or . button  
on the remote control to automatically search for active  
broadcasting stations.  
External Source  
Connect an External Component/MP3 player to your  
product.  
Press the TUNER/AUX button to select <AUX> input.  
Play a song from the external device.  
4. Press the MO/ST button to switch between stereo and  
mono.  
3. Press the USB REC button to start recording.  
In a poor reception area, select MONO for a  
clear, interference-free broadcast.  
CD  
“TRACK RECORDING” is displayed and CD  
recording starts.  
This applies only when listening to an FM station.  
5. If you do not want to store the radio station found,  
return to Step 3 and search for another station.  
Otherwise:  
Press and hold the USB REC button to start recording  
all tracks on the disc. "FULL CD RECORDING" is  
displayed.  
a. Press the ENTER button.  
MP3-CD  
b. Or, press the TUNING/ALBUM button on the  
remote control to select a program number.  
c. Press the ENTER button to save the preset.  
Press the USB REC button. The currently playing file  
is copied onto the USB device.  
Press and hold the USB REC button. All the files of  
the current folder are copied onto the USB device.  
When you connect a Microphone, press the USB  
REC button. The currently playing file is recorded onto  
the USB device, and the sound from the Microphone  
is recorded too.  
MP3 RECORDING: "MP3 RECORDING""RECORD"  
CD COPY: CHECK”“START”“COPY XX”“COPY END”  
is displayed. When the recording is done, “STOP”  
will be displayed.  
6. To store additional radio frequencies, repeat Steps 3  
through 5.  
In Tuner mode  
In the Manual mode, you can use the [ or ] button  
on the main unit to manually search for a radio station.  
In the Preset mode, you can use the [ or ] button  
on the main unit to search for a stored radio station.  
If there is a duplicate file name, "FILE EXIST" is  
displayed, and the function is canceled.  
Selecting a Stored Station  
Tuner /External Source  
You can listen to a stored radio station.  
RECORD is displayed.  
4. To stop recording, press the STOP (@) button. The  
unit automatically creates and saves recorded files  
in .MP3 format (SAM-XXXX.MP3).  
5. To remove the USB device safely, press the STOP (@)  
button once again. After recording, a directory named  
“RECORDING(DISCxxxx)”(FULL CD RECORDING),  
“RECORDING”(TRACK RECORDING), “CD  
COPY”(MP3 CD), “MP3 RECORDING”(MP3 CD),  
“TUNER RECORDING” or “AUX RECORDING” is  
created on your USB device.  
1. Select FM by pressing the TUNER/AUX button.  
2. Press the TUNING MODE button on the remote  
control until “PRESET” is displayed.  
3. Press the [ or ] button on the main unit or the  
TUNING/ALBUM , or . on the remote control to  
select a desired preset number.  
Do not disconnect the USB or the AC Cord during recording as  
this may cause damage to the file.  
WMA/MP2 files can be copied but not recorded.  
14  
English  
 
If you disconnected the USB device during a recording, the main  
unit powers off and you will not be able to delete the recorded  
file from your USB device. If this occurs, please connect the USB  
device to a PC and backup the USB data to the PC first, and then  
format the USB device.  
When the USB memory has insufficient free space, the system will  
display “NOT ENOUGH MEMORY”.  
The USB device or HDD you are recording to must be formatted in  
the FAT file system. The NFTS file system is not supported.  
When you use the CD high speed search function, CD recording is  
not available.  
Sometimes, the recording time may be longer with some USB  
devices.  
Press the TUNING/ALBUM , or . button to select a  
level from -06 to 06.  
Press the ENTER button.  
Result: The TREBLE level flashes.  
Press the TUNING/ALBUM , or . button to select a  
level from -06 to 06.  
Press the ENTER button.  
Result: setting is complete.  
The equalizer is set to "OFF" automatically and is not available  
during a CD recording.  
If no buttons are pressed within 4 seconds, your settings will  
automatically be cancelled and the previous settings will be  
saved.  
In the program mode, you can't use the CD recording function.  
The equalizer is set to "OFF" automatically and is not available  
during a CD recording.  
The equalizer mode may be different depending on your region.  
The GIGA SOUND function is set to "OFF" automatically and is not  
available during a CD recording.  
The REPEAT function is set to "OFF" automatically and is not  
available during a CD recording.  
If you use the MIC function during a CD recording, the voice from  
the microphone will be recorded.  
You can not record the radio when searching or when no available  
station is found in the Tuner mode.  
Selecting LOCAL EQ Mode  
You can directly select the LOCAL EQ mode by  
pressing the LOCAL EQ button.  
1. Press the LOCAL EQ button on the main unit until  
the required option is selected.  
Each time you press this button, the sound mode will  
switch as follows:  
OFF;FLAT;RANCHERA;SAMBA;CUMBIA  
;HABANERA;BOOMBA;REGGAE;MERENGUE  
;SALSA  
Note that setting the input level too loud when recording music from  
an external device through the AUX or USB channel may cause  
noise in the recording. If this occurs, lower the external devices  
volume level.  
The maximum TUNER/AUX recording time is 5 hours.  
The Local equalizer is set to "OFF" automatically and is not  
available during a CD recording.  
Recording Speed  
You can select the recording speed before recording.  
If no buttons are pressed within 4 seconds, your settings will  
automatically be cancelled and the previous settings will be  
saved.  
Each time you press the CD REC SPEED button  
on the remote control, the recording speed will  
change as follows:  
The equalizer mode may be different depending on your region.  
GIGA SOUND function  
The GIGA SOUND function amplifies the bass  
sound and provides twice the bass for powerful,  
realistic sound.  
RECORD SPD X 1 ; RECORD SPD X 4  
When you record from the tuner or an external source, you  
cannot change the recording speed.  
If you select RECORD SPD X 4, sound is not produced during  
the recording.  
If you connected the microphone, you have one recording  
speed mode available: RECORD SPD X 1.  
During recording, if you disconnect the microphone, the  
recording will stop. If you reconnect the microphone, the  
recording will not restart.  
1. Press the GIGA SOUND BLAST button on the  
main unit or the GIGA button on the remote control.  
Each time you press this button, the sound switches  
as follows:  
Selecting EQ Mode  
;
OFF GIGA SOUND BLAST  
2. To cancel this function, press the GIGA SOUND  
Your mini-compact system provides predefined  
equalizer settings that are optimized for particular  
music genre. You can also adjust the bass, middle  
and treble levels manually.  
BLAST button until “OFF” is displayed.  
The GIGA SOUND mode may be different depending  
on your region.  
1. Press the EQ button.  
Using the FOOTBALL MODE  
The football mode brightens the audio you are lis-  
tening to by amplifying the treble and mid-range.  
Each time you press this button, the sound mode will  
change as follows:  
OFF;FLAT;RANCHERA;SAMBA;CUMBIA  
;HABANERA;BOOMBA;REGGAE;MERENGUE  
;SALSA;PARTY;POP;HIP HOP;ROCK;JAZZ  
;CLASSIC;ELECTRONIC;MP3 ENHANCER  
;VIRTUAL SOUND;U B 0  
1. Press the FOOTBALL MODE button on the main unit.  
Each time you press this button, the sound mode  
switches as follows:  
OFF ; FOOTBALL MODE 1 ; FOOTBALL MODE 2  
2. To set the BASS, MIDDLE, TREBLE level manually:  
Press the ENTER button when you select the U B 0.  
Result: The BASS level flashes.  
2. To cancel this function, press the FOOTBALL  
MODE button until “OFF” is displayed.  
Press the TUNING/ALBUM , or . button to select a  
level from -06 to 06.  
Press the ENTER button.  
Result: The MIDDLE level flashes.  
The FOOTBALL MODE may be different depending  
on your region.  
English  
15  
 
Connecting a Microphone  
You can insert a microphone to sing along with your favorite CDs.  
1. Connect a mono microphone (3.5ø) to the MIC jack on the front of the product.  
2. Press the MIC VOL-, + button to adjust the volume of the microphone.  
3. Press the MY KARAOKE button to turn My Karaoke on and off. Each time the button is pressed, the selection  
changes as follows: ON  
OFF.  
`
If you hear strange noises (squealing or howling) while using the Karaoke feature, move the microphone away from  
the speakers. Turning down the microphone's volume or the speaker volume is also effective.  
The microphone does not operate in the AUX or TUNER modes.  
If you connect a microphone, GIGA SOUND will automatically turn off. Even if you remove the microphone, it will not  
turn on.  
`
`
`
`
`
`
When My Karaoke is on, EQ/LOCAL EQ/FOOTBALL MODE/GIGA SOUND do not work.  
The system does not retain the My Karaoke setting after you turn My Karaoke off.  
Use a mono microphone. If you connect a stereo microphone to the unit, the microphone might not work properly.  
The MY KARAOKE function is available only when you have connected a Microphone to the unit.  
Troubleshooting  
Refer to the chart below when this unit does not function properly. If the problem you are experiencing  
is not listed below or if the instructions below do not help, turn off the unit, disconnect the power cord,  
and contact the nearest authorized dealer or Samsung Electronics Service Center.  
Symptom  
Check/Remedy  
• Is the power cord plugged securely into the outlet?  
Turn off the power and then turn it back on.  
I cannot eject the disc.  
Playback does not start  
immediately when the  
Play/Pause button is pressed.  
• Are you using a deformed disc or a disc with scratches on the surface?  
• Wipe the disc clean.  
• No sound is heard during fast playback and slow playback.  
• Are the speakers connected properly? Is the speaker setup correctly  
customized?  
Sound is not produced.  
• Is the disc severely damaged?  
• Is the remote control being operated within its operational angle and  
distance range?  
• Are the batteries drained?  
The remote control does not  
work.  
• The product is not working.  
(Example: The power goes out or  
the front panel key doesn't work  
or you hear a strange noise.)  
Reset the unit: With no disc inserted and the “NO DISC” message on  
the display of the product, press and hold the STOP (@) button on the  
main unit for longer than 5 seconds.  
Using the RESET function will erase all stored settings.  
Do not use this unless necessary.  
• The product is not working  
normally.  
• Is the antenna connected properly?  
Can't receive radio broadcast.  
• If the antenna's input signal is weak, install an external FM antenna in an  
area with good reception.  
16  
English  
 
Specifications  
AC 120V~60Hz  
Power Requirements  
26 W  
Power Consumption (MX-F630B)  
Power Consumption (MX-F730B)  
Weight  
50 W  
5.06 lbs  
General  
7.99 (W) x 12.05 (H) x 10.10 (D) inches  
Dimensions  
+41°F~+95°F  
Operating Temperature Range  
Operating Humidity Range  
Signal/noise ratio  
10 % to 75 %  
55 dB  
12 dB  
FM Tuner  
CD Disc  
Usable sensitivity  
0.6 %  
Total harmonic distortion  
Reading Speed : 4.8 ~ 5.6 m/sec.  
Maximum Play Time : 74 min.  
CD : 5 inches (COMPACT DISC)  
Front speaker output  
MX-F630B- 220 Watts (MAX)  
110 W/CH (4 Ω/100 Hz)  
MX-F730B- 550 Watts (MAX)  
275 W/CH (4 Ω/100 Hz)  
20 Hz~20 KHz  
Front speaker output  
Frequency range  
S/N Ratio  
Amplifier  
80 dB  
Channel separation  
Input sensitivity  
65 dB  
(AUX) 800 mV  
*: Nominal specification  
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.  
- Weight and dimensions are approximate.  
- Design and specifications are subject to change without prior notice.  
- For information on the power supply and power consumption, refer to the label attached to the product.  
Important Note About Service  
An administration fee may be charged if either:  
a. An engineer is called out at your request and there is no defect in the product.  
b. You bring the unit to a repair center and there is no defect in the product  
You will be advised of the amount of such an administration charge before any work or home visit  
is carried out.  
If you have a problem with this product, we strongly recommend you read the appropriate section  
of this manual, review the Troubleshooting section on page 16, visit the Support page for your  
answer before you contact a service center for a repair.  
English  
17  
 
LIMITED WARRANTY TO ORIGINAL PURCHASER  
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the  
original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for  
a limited warranty period of:  
One (1) Year Parts and Labor*  
(*90 Days Parts and Labor for Commercial Use)  
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United  
States. To receive warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures.  
Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be  
presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the  
product to and from the service center is the responsibility of the purchaser.  
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned  
parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products  
become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the  
remaining original warranty, or ninety (90) days, whichever is longer.  
SAMSUNGs obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in  
the applicable end user license agreement. Non-SAMSUNG hardware and software products, if provided, are on an “AS IS” basis.  
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.  
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to  
the extent otherwise expressly provided for in this statement, noncommercial use of this product, and shall not apply to the  
following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses for  
which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse,  
neglect, fire, water, lightning or other acts of nature; use of products, equipment, systems, utilities, services, parts, supplies,  
accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by SAMSUNG, or  
which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer  
adjustments and failure to follow operating instructions, cleaning, maintenance and environmental instructions that are covered  
and prescribed in the instruction book; product removal or reinstallation; reception problems and distortion related to noise,  
echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free  
operation of the product.  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES  
WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY  
OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED  
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH  
RESPECT TO THIS PRODUCT SHALL BE BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF  
REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL  
OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS  
OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT  
THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT  
LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO  
PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF THE USE,  
MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF  
SAMSUNG. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF  
THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.  
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or  
consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal  
rights, and you may also have other rights which vary from state to state.  
To obtain warranty service, please contact SAMSUNG customer care center.  
 
QUESTIONS OR COMMENTS?  
COUNTRY  
CALL  
OR VISIT US ONLINE AT  
WRITE  
Samsung Electronics America, Inc.  
85 Challenger Road Ridgefield Park,  
NJ 07660-2112  
1-800-SAMSUNG  
(1-800-726-7864)  
IN THE US  
Code No. AH68-02604M (Rev 0.0)  
 

Radica Games Video Game Console 76037 User Guide
Realistic Scanner 20 507 User Guide
Roland Electronic Keyboard F 90 User Guide
Roper Washer SP W10200825A User Guide
Rowenta Electric Shaver 037116 20 04 RF3210 9210 User Guide
Ruby Tech Switch FGS 2924R User Guide
Sabrent Computer Accessories EC 3US35 User Guide
Samsung Air Conditioner DB98 17032A5 User Guide
Samsung Dishwasher DMT300 Series User Guide
Sears Snow Blower 247 886510 User Guide