Connection Panel (depending on the model)
Color TElEVISIoN
The product color and shape may vary depending on the
model.
➢
CT2ꢀZ43/2ꢀZ45/2ꢀZ47/2ꢀZ50/
2ꢀZ57/2ꢀZ58/2ꢀAE0/2ꢀAF0/
2ꢀAJ0/2ꢀAM0
rear Jack
Side Jack
1
owner’s Instructions
4
1
3
2
3
Before operating, please read this manual carefully,
and retain it for future reference.
2
3
Record your Model and Serial number.
▪ Model __________ ▪ Serial No. __________
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
➢
Please be sure to match the color coded input terminals
and cable jacks.
When both the side and rear jacks (AV IN 2) are
connected to external equipment, the side receives
priority.
➢
Control Panel (depending on the model)
The product color and shape may vary depending on the
model.
➢
1 Audio/Video output Jacks
Connect to the audio/video input jacks of a recording VCR.
1 Audio Input Jacks
Front Panel
2 Audio/Video Input Jacks
Connect audio signals from a camcorder or video game.
Connect to the audio/video output jacks of VCRs, DVD players
and similar devices.
2 Video Input Jack
Connect a video signal from a camcorder or video game.
3 Component Video Input Jacks (Y, PB, Pr)
3 Headphone Jack
Connect to the Component video outputs of a DVD or DTV
set-top box. 480i video signal input is available.
When using the Component Video input, connect audio jacks
to “AV IN 2 (AUDIO-L/R)”.
Connect a set of external headphones to this jack for private
listening.
1
2
3
4
5
6
On-screen menu display
Volume adjustment
Channel selection
Remote control sensor
Indicator (Standby or Timer)
Power on/off
4 ANT IN
Connect to an antenna or to a cable TV system.
The 2 and 3 buttons also have the same function as the
◄/►/▲/▼ buttons on the remote control.
If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
AA68-04005A-01
English - ꢀ
Setup - Plug & Play (depending on the model)
Input - Source list
When the TV is initially powered on, several basic customer
settings proceed automatically and subsequently.
The following settings are available.
5
6
After all available channels
are stored, the “Clock set” is
displayed. Press the ENTEr
button. Press the ◄ or ►
button to move to the hour
or minute. Set the clock by
pressing the ▲ or ▼ button.
Plug & Play
Source List
Source list
TV
TV
You can switch between
viewing signal from connected
equipment, such as a VCR,
DVD, set-top box, and the TV
source (broadcast or cable).
Clock Set
12:00 am
AV1
AV2
Component
Move
Enter
Skip
Adjust
Plug & Play
ꢀ
Press the PoWEr button on
the remote control.
The message “Plug & Play”
is displayed. It flickers for a
little while and then Language
menu is automatically
displayed.
Start Plug & Play
OK
Move
Enter
Return
Press the SoUrCE
button on the remote
➢
Enter
Exit
control repeatedly to select the desired signal source.
When you have finished,
press the MENU button.
The “Enjoy your watching.”
is displayed and then the
channel which has been
stored will be activated.
Plug & Play
Language
Enjoy your watching.
OK
English
2
Press the ▲ or ▼ button to
select the language, then
press the ENTEr button. The
message “Check antenna
input” is displayed.
Español
Português
Français
Plug & Play feature doesn’t work in the AV mode,
and then the channel which has been stored will be
activated.
➢
Move
Enter
Skip
If any language is not
selected, the language
menu will disappear
➢
Plug & Play
Setup
TV
Check antenna input.
OK
Plug & Play
Language
Time
►
: English ►
about 30 seconds later.
►
: Off
►
: On
: On
: Off
Re-setting the Plug & Play
Method:
MENU ▲/▼ (Setup)
ENTEr ▲/▼ (Plug & Play)
ENTEr
Caption
Enter
Skip
Child Lock
Blue Screen
Melody
►
►
►
Music Mode
Plug & Play
Auto Program
3
4
Make sure that the antenna is
connected to the TV.
Press the ENTEr button,
then the “Auto Program” is
displayed.
Move
Enter
Return
0%
Start
Enter
Skip
Plug & Play
Auto Program
Air 3
Press the ENTEr button to
select “Start”. The TV will
begin memorizing all of the
available channels. Press the
ENTEr button to stop.
102MHz
7
%
Stop
Enter
Skip
continued...
English - 3
Channel - Memorizing the Channels
Channel - Fine Tune
Channel - Channel Grouping
Channel Grouping
TV
Your TV can memorize and store all of the available channels
for both air and cable channels. After the available channels
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted, you
may have to fine-tune the channel manually.
You can choose your category
and find your desired channel
in a few seconds. You can save
a channel under the following
categories-Movie, Music, News,
Sports, and User.
Group Select : Sport
Set Channel Group
►
►
are memorized, use the CH
and CH
buttons to scan
through the channels.
This eliminates the need to change channels by entering the
channel digits. There are three steps for memorizing channels:
“Air/Cable”, “Auto Program” and “Add/Delete”.
Method:
Fine Tune
Move
Adjust
Return
◄/► : You can obtain a sharp
P1
0
Method:
Set Channel Group
and clear picture and good sound
quality.
▲/▼ ENTEr : You can reset
the setting.
Reset
Movie Music News Sport User
P 1
▲/▼ : Used to select a
Programme.
◄/► : Used to select the desired
channel group.
▲/▼ : Used to confirm the new
choice.
Air/Cable
Move
Adjust
Save
Return
P 2
P 3
P 4
P 5
P 6
P 7
P 8
Channel
: Air
Before your TV can begin
memorizing the available
channels, you must specify
the type of signal source
that is connected to the TV
(i.e., an antenna or a cable
system). Select “Air” or
“Cable” by pressing the ◄/►
button.
TV
Air/Cable
►
Auto Program
Add/Delete
Fine Tune
►
►
►
►
ENTEr : You can memorise adjusted picture or sound.
Channel Grouping
Move
Adjust
Return
You can press ▼ to select
➢
Channel Group(All, Movie, Music, News, Sport, User)
directly.
You can also use the EZ.VIEW button to use this function.
Move
Adjust
Return
➢
Auto Program
Search
Start
All available channels are
automatically stored in
memory when channels are
selected by the direct tuning
function.
Press the ENTEr button
at any time to interrupt the
memorization process.
0%
Enter
Return
Add/Delete
Add/Delete
You can add or delete
a channel to display the
channels you want only. To
use the “Add/Delete” function,
first run Auto Program.
Select “Deleted” or “Added”
by pressing the ENTEr
button.
TV
▲
More
P 1 : Deleted
P 2 : Deleted
P 3 : Deleted
P 4 : Deleted
P 5 : Deleted
▼
More
Move
Enter
Return
English - 4
Setup - Time
Setup - Caption (depending on the model)
Setup -
language / Blue Screen /
Melody / Music Mode (depending on the model)
Your TV decodes and displays the
closed captions that are broadcast
with certain TV shows. These
captions are usually subtitles for
the hearing impaired or foreign-
language translations. All VCRs
record the closed caption signal
from TV programs, so home-
Setup
TV
Clock
Plug & Play
►
►
►
Time
Setting the clock is necessary
in order to use the various
timer features of the TV. Also,
you can check the time while
watching the TV. (Just press
the INFo button.)
TV
Language
: English
: On
12:00 am
Clock
Sleep Timer : Off
Scheduler
Time
Caption
Child Lock
►
►
►
►
►
Setup
language
TV
Blue Screen : On
Plug & Play
Language
Time
►
►
►
When you start using the TV
for the first time, you must
select the language which will
be used for displaying menus
and indications.
Melody
Music Mode
: On
: English
: On
: Off
Caption
Move
Enter
Return
Child Lock
Blue Screen
Melody
►
►
►
►
Move
Enter
Return
: On
: On
: Off
recorded video tapes also provide closed captions. Most pre-
recorded commercial video tapes provide closed captions as
well. Check for the closed caption symbol in your TV schedule
and on the tape’s packaging: CC .
Music Mode
Sleep Timer
Move
Enter
Return
You can select a time period of between 30 and 180
minutes after which the TV automatically switches to
standby mode.
Blue Screen
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the “Blue Screen” to “Off”.
Caption: on/off
You can activate or deactivate the “Caption” function.
Scheduler
You can set the scheduler
TV
Scheduler
Melody
to make the TV return to a
particular channel at a pre-set
time.
P On Time Off Time Set
1.--- --:-- am --:-- am No
2.--- --:-- am --:-- am No
3.--- --:-- am --:-- am No
4.--- --:-- am --:-- am No
5.--- --:-- am --:-- am No
You can hear melody sound when the TV is powered on
or off.
Upto 5 Programmes can
be scheduled at a time.
➢
On Timer Volume
10
Music Mode
You can listen to the music/audio with no video or visual
r.Surf Feature (depending on the model)
Move Enter
Return
If the Clock is not set in
the Time menu, a pop-up
➢
distraction.
When Music Mode is selected, only music is audible
and no picture is visible. You can see music mode
icon ( ) on screen.
➢
warning will flash if user tries to enter Scheduler.
This feature allows you to set
the TV to return to a particular
channel after a certain amount of
time. For example, you may be
watching a channel when
on Timer Volume
The preferred volume can be set for when the timer
automatically turns on the TV.
You can also use the EZ.VIEW button to use this
function.
➢
commercials start. You can set
Surf
00: 29
Method:
the R.Surf to “5 minutes”, then
switch channels. After minutes,
the TV will return to the original
channel.
Method:
ENTER : On/Off
◄/► : Move to the programme hour or minute.
▲/▼ : Used to set programme hour or minute.
▲/▼ ENTEr : Set option of YES/ON to activate/deactive
Press the r.SUrF button on the remote control repeatedly to
set the timer in thirty second intervals, up to five minutes.
the operation.
You must set the clock first.
Auto Power Off
When you set the timer “On”, the TV will eventually turn
off, if no controls are operated for 3 hours after the TV was
turned on by timer. This function is only available in timer
“On” mode and prevents overheating, which may occur if a
TV is on for too long.
☛
☛
English - 5
Setup - Child lock (depending on the model)
Picture - Mode
Sound -
Mode / Equalizer / MTS / Auto Volume /
Pseudo Stereo /Turbo Plus / Half Mute
This feature allows you to prevent
unauthorized users, such as
Child Lock
TV
Mode:
Child Lock
Channel
Lock
: On
: P 1
►
Dynamic / Standard / Movie
/ Custom
Mode
TV
children, from watching unsuitable
programs by muting out video
and audio. Child Lock cannot be
released using front panel buttons.
Only remote control can release
the Child Lock setting, so keep
:
?
Mode
: Dynamic
►
You can select the type
of picture which best
corresponds to your viewing
requirements.
Sound
Contrast
Brightness
Sharpness
Color
:
:
:
:
:
100
TV
Mode: Standard/Music/
Movie/Speech/Custom
You can select the type of
special sound effect to be
used when watching a given
broadcast.
50
75
50
Mode
Equalizer
MTS
Auto Volume
Pseudo Stereo
Turbo Plus
Half Mute
: Standard
►
►
►
►
►
►
►
: Stereo
: Off
: Off
: Off
: On
Tint
G 50 R 50
Move
Enter
Return
Colour Tone : Cool1
Reset
►
►
Move
Adjust
Return
the remote control away from children.
Contrast / Brightness /
Sharpness / Color / Tint (NTSC only)
Move
Enter
Exit
Equalizer
The television has several settings which allow you to
control the sound quality.
Child lock: on/off
You can activate or deactivate the Child Lock function.
The TV has several settings which allow you to control the
picture quality.
If you make any changes to these settings, the sound
mode is automatically switched to Custom.
➢
Channel: Channel number to be locked.
Color Tone: Cool2 / Coolꢀ / Normal / Warmꢀ / Warm2
You can change the color of the entire screen according to
your preference.
MTS (Multi-channel Television Sound)
Depending on the particular program being broadcast, you
can listen to Mono, Stereo, or SAP.
lock: When press the ENTEr button, the Locked is
displayed.
Press the MTS button on the remote control
repeatedly to select “Stereo”, “Mono”, or “SAP”
➢
reset
You can retum to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
(Secondary Audio Program).
If any channel is locked, you can not access to the
“Channel” and “Child Lock” menu by using the control
buttons on the TV panel (the “Not Available” is displayed
in the “Child Lock” menu). You can access by using the
remote control only.
➢
Auto Volume
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Picture - Digital Nr / DNIe Jr
◆
◆
Pseudo Stereo
(depending on the model)
This feature converts a monaural sound signal into two
identical left and right channels. Once the “Pseudo Stereo”
is set to “On” or “Off”, the setting applies to the sound
effects such as “Standard”, “Music”, “Movie” and “Speech”.
Picture
TV
Digital Nr
Mode
Digital NR
DNIe Jr
: Dynamic
►
►
►
If the signal received by the
television is weak, you can
activate this feature to reduce
any static and ghosting that
may appear on the screen.
:
:
Off
Off
Turbo Plus
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channels.
Move
Enter
Exit
Half Mute
DNIe Jr
You can reduce volume to half and control volume even in
the mute mode.
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
When you click the “mute” button once to activate Half
Mute see half mute ( ) on screen, twice for Full Mute
see full mute icon ( ) on screen.
➢
You can also use the EZ.VIEW button to use this function.
➢
Method:
ENTEr : On/Off
English - 6
Easy View - Channel Minimizer
Troubleshooting
Easy view is a combination of
Video&Audio features that make
TV viewing much easier.
If the TV seems to have a problem, first try this list of possible
problems and solutions. If none of these troubleshooting tips
apply, then call your nearest Samsung authorized service
center.
The TV won’t turn on.
Make sure the wall outlet is working.
Make sure the TV is plugged in.
Make sure the remote has batteries.
Channel minimizer is a feature that
offers freedom in the number of
channels that you can watch at
any time!
remote control malfunctions
Poor picture.
Easy View
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission
window).
Channel Grouping
Channel Minimizer
Channel Scheduler
Music Mode
►
►
►
►
►
Try another channel.
Adjust the antenna.
Check all wire connections.
Check that the “+” and “-” ends of the batteries are
inserted correctly.
To add a Channel
Half Mute
You can go to your favorite
channel you wish to add to
Channel Minimizer.
Poor sound quality.
Move
Enter
Exit
Check that the batteries are drained.
Try another channel.
Adjust the antenna.
Scroll
Select
▼
▼
Delete
Delete
Method:
▲ : Add the present channel to
Channel Minimizer.
Cleaning and Maintaining Your TV
Please follow the guidelines to get the maximum performance
from your TV.
No picture or sound.
P14
P20
P35
Select
Scroll
Try another channel.
Press the SoUrCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the MUTE button is off.
Repeat the process to add upto six channels.
➢
Placement
To delete a Channel
You can delete the channel in Channel Minimizer by
pressing▼ button.
Do not Place the TV near extremely hot, cold, humid or
dusty places.
No color, wrong colors or tints.
Do not place TV near appliances with electric motor that
create magnetic fields, such as vacuum cleaners.
Keep the ventilation openings clear; do not place TV on a
soft surface, such as cloth or paper.
You can display Channel Minimizer menu by pressing
◄/►/▲ button.
You cannot display Channel Minimizer menu by pressing
▲ button when six channels are added.
Channel Minimizer is always activated hence you don’t
need to press Easy view button.
➢
➢
➢
Make sure the program is broadcast in color.
Adjust the picture settings.
Place the TV in a vertical position only.
Picture rolls vertically.
Adjust the antenna.
Check all wire connections.
If you are using a VCR, check the tracking.
liquids
Do not handle liquids near or on the TV. Liquid that spills
into it can cause serious damage.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it again.
Your remote control does not operate your TV.
Cabinet
Never open the cabinet or touch the parts inside.
Wipe your TV with a clean, dry cloth. Never use water,
cleaning fluids, wax or chemicals.
Make sure the remote has batteries.
Check that the “+” and “-” ends of the batteries are
inserted correctly.
Do not put heavy objects on top of the cabinet.
Temperature
If your TV suddenly move from a cold to a warm place,
Check that the batteries are drained.
unplug the power cord and allow at least two hours for
moisture that may have formed inside the unit to dry
completely.
Using Your TV in Another Country
If you plan to take the TV with you to a foreign country
please be aware of a different television systems that
are in use around the world. A TV designed for one
system may not work properly with another system due to
differences in the TV channel frequencies.
continued...
Note: Main plug serves as the disconnect device during
servicing and shall be readily operable.
➢
English - 7
oSD Map
✽ : It is variable depending on the model.
Important Warranty Information
regarding Television Format Viewing
Input
– Source list
– TV / AVꢀ / AV2 / Component
Standard screen format televisions (4:3, the aspect ratio of the
screen width to height) are primarily designed to view standard
format full-motion video. The images displayed on them should
primarily be in the standard 4:3 ratio format and constantly
moving. Displaying stationary graphics and images on screen,
such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total
television viewing per week.
Picture
– Mode
– Dynamic / Standard / Movie / Custom
Contrast
Brightness
Sharpness
Color
Tint (NTSC only)
Color Tone – Cool2 / Coolꢀ / Normal / Warmꢀ / Warm2
Wide screen format televisions (16:9, the aspect ratio of
the screen width to height) are primarily designed to view
wide screen format full-motion video. The images displayed
on them should primarily be in the wide screen 16:9 ratio
format, or expanded to fill the screen if your model offers this
feature, and constantly moving. Displaying stationary graphics
and images on screen, such as the dark side-bars on non-
expanded standard format television video and programming,
should be limited to no more than 15% of the total television
viewing per week.
reset
– Digital Nr
– off / on
– off / on
– DNIe Jr ✽
Sound
– Mode
– Standard / Music / Movie / Speech / Custom
– Equalizer
– MTS
– Mono / Stereo / SAP
– off / on
– Auto Volume
– Pseudo Stereo
– Turbo Plus
– Half Mute
– off / on
Additionally, viewing other stationary images and text such as
stock market reports, video game displays, station logos, web
sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary
images that exceed the above guidelines can cause
uneven aging of picture tubes (CRTs) that leave subtle,
but permanent burned-in ghost images in the television
picture. To avoid this, vary the programming and images,
and primarily display full screen moving images, not
stationary patterns or dark bars. On television models that
offer picture sizing features, use these controls to view the
different formats as a full screen picture.
– off / on
– off / on
Channel
Setup
– Air/Cable
– Air / Cable
– Auto Program
– Add/Delete
– Deleted / Added
– Fine Tune
– Channel Grouping
– Plug & Play
– language ✽
– English / Español / Português / Français
Be careful in the selection and duration of television formats
used for viewing. Uneven CRT aging as a result of format
selection and use, as well as other burned-in images, is not
covered by your Samsung limited warranty.
– Time
– Clock
– Sleep Timer
– Scheduler
– off / on
– Child lock
– Channel
– lock
– Caption
– Child lock
– Blue Screen
– Melody
– off / on
– off / on
– off / on
– Music Mode
English - 8
|