3 Component Video Input Jacks (Y, PB, PR)
Rear Jack
Connect to the Component video outputs of a DVD or DTV
set-top box. 480i video signal input is available.
When using the Component Video input, connect audio jacks
to “AV IN 2 (AUDIO-L/R)”.
COLOR TELEVISION
1
2
CL2ꢀZ43/2ꢀZ45/2ꢀZ47/2ꢀZ50/
2ꢀZ55/2ꢀZ57/2ꢀZ58/2ꢀAE0/
2ꢀAF0/2ꢀAM0/2ꢀAJ0/2ꢀBH0
4
4
3
4 ANT IN
3
5
Connect to an antenna or to a cable TV system.
Front (or Side) Panel
Owner’s Instructions
1
2
Before operating, please read this manual thoroughly,
and retain it for future reference.
1
1
2
5
Record your Model and Serial number.
2
3
▪ Model __________ ▪ Serial No. __________
4
Control Panel (depending on the model)
1
5
The product colour and shape may vary depending on the
➢
model.
1
1
2
3
Front (or Side) Panel
2
3
4
1
5
1
2
1
2
1
2
3
4
5
6
On-screen menu display
Volume adjustment
Channel selection
Remote control sensor
Standby indicator
Power on/off
4
5
1
2
3
Audio input
Video inpout
Headphone jack
The 2 and 3 buttons also have the same function as the
◄/►/▲/▼ buttons on the remote control.
If the remote control no longer works or you have
misplaced it, you can use the controls on the panel of the
television.
Please be sure to match the colour coded input terminals
and cable jacks.
☛
Whenever you connect an audio or video system to your
television, ensure that all elements are switched off.
Please be sure to match the color coded input terminals
and cable jacks.
➢
Connecting to the RCA Input
The 1 (AUDIO-L/R) and 2 (VIDEO) connectors are used for
equipment, such as a camcorder, video disc player, or video
game device.
Connection Panel (depending on the model)
1 Audio/Video Output Jacks
Connect to the audio/video input jacks of a recording VCR.
The product color and shape may vary depending on the
model.
continued...
➢
2,5 Audio/Video Input Jacks
Connect to the audio/video output jacks of VCRs, DVD players
and similar devices. when using the mono equipment,connect
to the AUDIO-L of 2,5 input connector
English - ꢀ
AA68-03992K-00
Setup - Plug & Play (depending on the model)
Input - Source List (depending on the model)
Source List
When the TV is initially powered on, several basic customer
settings proceed automatically and subsequently.
The following settings are available.
5
6
After all available channels
are stored, the “Clock set”
is displayed. Press the
ENTER button. Press the
◄ or ► button to move to
the hour or minute. Set the
clock by pressing the ▲ or
▼ button.
Source List
You can switch between
viewing signal from
connected equipment, such
as a VCR, DVD, set-top
box, and the TV source
(broadcast or cable).
TV
AVꢀ
AV2
Component
Plug & Play
Clock Set
ꢀ2 : 00 am
ꢀ
Press the POWER button on
the remote control.
Move
Enter
Skip
Adjust
Plug & Play
The message “Start Plug
& Play” is displayed. It
flickers for a little while and
then Language menu is
automatically displayed.
Move
Enter
Return
Start Plug & Play.
OK
Press the SOURCE
➢
button on the remote control repeatedly to select the
desired signal source.
Enter
Exit
When you have finished,
press the MENU button.
The “Enjoy your watching.”
is displayed and then the
channel which has been
stored will be activated.
Enjoy your watching.
OK
Plug & Play
2
Press the ▲ or ▼ button to
select the language, then
press the ENTER button. The
message “Check antenna
input” is displayed.
Language
English
Español
Português
Français
Plug & Play feature
doesn’t work in the
➢
Move
Enter
Skip
If any language is not
selected, the language
menu will disappear
➢
AV mode, and then the
channel which has been
stored will be activated.
about 30 seconds later.
Plug & Play
Check antenna input.
OK
Enter
Skip
Re-setting the Plug & Play
Method:
MENU ▲/▼ (Setup) ENTER ▲/▼ (Plug & Play)
ENTER
3
4
Make sure that the antenna
is connected to the TV.
Press the ENTER button,
then the “Auto Program” is
displayed.
Plug & Play
Auto Program
Setup
Plug & Play
Language
Time
►
►
►
►
►
►
0%
: English
: Off
Caption
Start
Child Lock
Blue Screen : On
Enter
Skip
Press the ENTER button to
select “Start”. The TV will
begin memorizing all of the
available channels. Press the
ENTER button to stop.
Move
Enter
Return
Plug & Play
Auto Program
Air 3
3%
Stop
Enter
Skip
continued...
English - 3
Channel - Memorizing the Channels
Channel - Fine Tune
Sleep Timer
Your TV can memorize and store all of the available channels
for both air (antenna) and cable channels. After the available
The Fine Tuning function lets
you manually adjust the TV’s
tuner if you have difficulty tuning
channels.
Adjust the fine tuning by pressing
the ◄ or ► button.
To store the fine tuning setting
in the TV’s memory, press the
ENTER button.
You can select a time period of between 30 and 180 minutes
after which the TV automatically switches to standby mode.
Press the TOOLS button on the remote control to enter Sleep
Timer. (any of the preset values from “30 Min.” to “180 Min.”).
Fine Tune
Reset
channels are memorized, use the CH
and CH
buttons
P 3
0
to scan through the channels.
This eliminates the need to change channels by entering the
channel digits. There are three steps for memorizing channels:
“Air/Cable”, “Auto Program” and “Add/Delete”.
Move
Adjust
Save
Return
Channel
Air/Cable
To reset the fine tuning to “0”, select ”Reset” by pressing the
▲ or ▼ button, then press the ENTER button.
Air/Cable
:Air
►
►
►
►
Before your TV can begin
memorizing the available
channels, you must specify
the type of signal source
that is connected to the TV
(i.e., an antenna or a cable
system).
Auto Program
Add/Delete
Fine Tune
Move
Adjust
Return
Select “Air” or “Cable” by pressing the ◄ or ► button.
Auto Program
Search
Setup - Time
Setup - Caption (depending on the model)
All available channels are
automatically stored in
Air 3
Time
3%
Your TV decodes and displays
the closed captions that are
broadcast with certain TV shows.
These captions are usually
subtitles for the hearing impaired
or foreign-language translations.
All VCRs record the closed
memory when channels are
selected by the direct tuning
function.
Press the ENTER button
at any time to interrupt the
memorization process.
Clock
Setting the clock is
Setup
Clock
-- : -- am
-- : -- am Off
-- : -- am Off
Plug & Play
Language
Time
►
►
►
►
►
►
On Timer
Off Timer
Stop
: English
: On
necessary in order to use the
various timer features of the
TV. Also, you can check the
time while watching the TV.
(Just press the INFO button.)
Enter
Return
Caption
Child Lock
Blue Screen : On
Move
Enter
Return
Move
Enter
Return
caption signal from TV programs,
Add/Delete
Add/Delete
so home-recorded video tapes also provide closed captions.
Most pre-recorded commercial video tapes provide closed
captions as well. Check for the closed caption symbol in your
TV schedule and on the tape’s packaging: CC .
You can add or delete
a channel to display the
channels you want only. To
use the “Add/Delete” function,
first run Auto Program.
Select “Deleted” or “Added”
by pressing the ENTER
button.
On Timer / Off Timer
You can set the On/Off timers so that the TV will switch on
▲ More
2
3
4
5
6
: Added
: Deleted
: Deleted
: Deleted
: Deleted
or off automatically at the time you select.
You must set the clock first.
➢
▼ More
Caption: On/Off
You can activate or deactivate the “Caption” function.
Move
Enter
Return
Auto Power Off
☛
When you set the timer “On”, the TV will eventually turn
off, if no controls are operated for 3 hours after the TV was
turned on by timer. This function is only available in timer
“On” mode and prevents overheating or leakages, which
may occur if a TV is on for too long.
Misspellings and unusual characters sometimes occur
during closed caption transmissions, especially those of
live events. There may be a small delay before captions
appear when you change channels. These are not
malfunctions of the TV.
☛
English - 4
Setup - Child Lock
Setup - Language / Blue Screen
Picture - Mode
(depending on the model)
This feature allows you to
Child Lock
Mode:
Child Lock
Channel
Lock
: On
: P ꢀꢀ
: ?
►
prevent unauthorized users,
such as children, from watching
unsuitable programmes by
muting out video and audio. Child
Lock cannot be released using
front (or side) panel buttons.
Only remote control can release
Dynamic / Standard / Movie
/ Custom
You can select the type
of picture which best
corresponds to your viewing
requirements.
Mode
Dynamic
Language
Mode
:
:
:
:
:
:
►
Setup
Contrast
Brightness
Sharpness
Color
ꢀ00
50
75
It is variable depending on
the model. When you start
using the television for the
first time, you must select the
language which will be used
for displaying menus and
indications.
Plug&Play
Language
Time
►
►
►
►
►
►
: English
: Off
50
R 50
Caption
Tint
G 50
: Coolꢀ
Child Lock
Blue Screen
Colour Tone
►
►
Move
Enter
Return
: On
Reset
Move
Enter
Return
the Child Lock setting, so keep the remote control away from
children.
You can select these options
simply by pressing the
Move
Enter
Return
➢
TOOLS button on the remote
control and enter Picture Mode.
Child Lock : On/Off
Blue Screen
You can activate or deactivate the Child Lock function.
Channel : Channel number to be locked.
Lock : When press the ENTER button, the “Locked” is
displayed.
If no signal is being received or the signal is very weak,
a blue screen automatically replaces the noisy picture
background. If you wish to continue viewing the poor
picture, you must set the Blue Screen to Off.
Contrast / Brightness / Sharpness / Color / Tint (NTSC
only)
The TV has several settings which allow you to control the
picture quality.
If any channel is locked, you can not access to the
“Channel” and “Child Lock” menu by using the control
buttons on the TV panel (the “Not Available” is displayed
in the “Child Lock” menu). You can access by using the
remote control only.
➢
Color Tone: Cool2 / Coolꢀ / Normal / Warmꢀ / Warm2
You can change the color of the entire screen according to
your preference.
Reset
You can retum to the factory defaults.
The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
Picture - Digital NR / DNIe Jr
(depending on the model)
R.SURF Feature (depending on the model)
This feature allows you to set
the TV to return to a particular
channel after a certain amount of
time. For example, you may be
watching a channel when
Picture
Dynamic
Digital NR
Mode
Digital NR
DNIe Jr
:
:
:
►
If the signal received by
the television is weak, you
can activate this feature
to reduce any static and
ghosting that may appear on
the screen.
Off
Off
►
►
commercials start. You can press
Surf
00: 29
TOOLS button to enter R.SURF
to set the R.SURF to “5 minutes”,
then switch channels. After
Move
Enter
Exit
DNIe Jr
minutes, the TV will return to the original channel.
If the signal received by the television is weak, you can
activate this feature to reduce any static and ghosting that
may appear on the screen.
Press the ENTER button on the remote control to set the timer
in thirty seconds intervals, up to five minutes.
English - 5
A still image may cause color distortion, but with normal
sound(white or highlight image).
Sound - Mode / Adjust / Auto Volume /
Troubleshooting
Turbo Sound (depending on the model)
Switch to other channels with moving image, and check if
the color turns normal after 5 minutes.
Turn off the TV, and turn it on after 30 minutes to check
the color
If the TV seems to have a problem, first try this list of possible
problems and solutions. If none of these troubleshooting tips
apply, then call your nearest Samsung authorized service center.
Mode : Standard / Music /
Movie / Speech / Custom
You can select the type of
special sound effect to be
used when watching a given
broadcast.
Sound
Mode
Adjust
Auto Volume
Turbo Sound
: Custom
►
►
►
►
Poor picture.
: Off
: Off
Try another channel.
Adjust the antenna.
Check all wire connections.
You can select these
options simply by
Move
Adjust
Return
➢
Poor sound quality.
pressing the TOOLS button on the remote control and
enter Sound Mode.
Try another channel.
Adjust the antenna.
Cleaning and Maintaining Your TV
Adjust : Bass / Treble / Balance
The television has several settings which allow you to
control the sound quality.
No picture or sound.
Please follow the guidelines to get the maximum performance
from your TV.
Try another channel.
If you make any changes to these settings, the sound
mode is automatically switched to “Custom”.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the MUTE button is off.
➢
Placement
Do not Place the TV near extremely hot, cold, humid or
dusty places.
You can select these
the TOOLS button on the remote control and
pressing
options simply by
➢
Do not place TV near appliances with electric motor that
create magnetic fields, such as vacuum cleaners.
Keep the ventilation openings clear; do not place TV on a
soft surface, such as cloth or paper.
No color, wrong colors or tints.
enter Sound Adjust to use this function.
Make sure the program is broadcast in color.
Adjust the picture settings.
Auto Volume
Place the TV in a vertical position only.
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Picture rolls vertically.
Liquids
Do not handle liquids near or on the TV. Liquid that spills
Adjust the antenna.
Check all wire connections.
If you are using a VCR, check the tracking.
into it can cause serious damage.
Cabinet
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it again.
Your remote control does not operate your TV.
Turbo Sound
Never open the cabinet or touch the parts inside.
This feature suitably emphasizes both higher and lower
bands of sound (and includes other effects). You can enjoy
more magnificent and dynamic sound when watching
music, movie, or other channels.
Wipe your TV with a clean, dry cloth. Never use water,
cleaning fluids, wax or chemicals.
Do not put heavy objects on top of the cabinet.
Make sure the remote has batteries.
Check that the “+” and “-” ends of the batteries are
inserted correctly.
Temperature
If your TV suddenly move from a cold to a warm place,
You can change the options simply by pressing the
TOOLS button and enter Turbo Sound.
➢
Check that the batteries are drained.
unplug the power cord and allow at least two hours for
moisture that may have formed inside the unit to dry
completely.
The TV won’t turn on.
MTS (Multi-channel Television Sound) (depending on
the model)
Make sure the wall outlet is working.
Make sure the TV is plugged in.
Make sure the remote has batteries.
Using Your TV in Another Country
If you plan to take the TV with you to a foreign country
please be aware of a different television systems that
are in use around the world. A TV designed for one
system may not work properly with another system due to
differences in the TV channel frequencies.
Depending on the particular
program being broadcast,
Remote control malfunctions
AV
Mono
you cannot listen to “Mono” or
“Stereo”.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission
window).
Only when the TV is set in AV
mode, press the TOOLS button on
the remote control to enter MTS to
select “Stereo”, “Mono”.
Note: Main plug serves as the disconnect device during
servicing and shall be readily operable.
➢
Check that the “+” and “-” ends of the batteries are
inserted correctly.
Check that the batteries are drained.
English - 6
OSD Map
✽ : It is variable depending on the model.
Important Warranty Information
Regarding Television Format Viewing
Input
– Source List ✽
– TV / AVꢀ / AV2 / Component
Standard screen format televisions (4:3, the aspect ratio of the
screen width to height) are primarily designed to view standard
format full-motion video. The images displayed on them should
primarily be in the standard 4:3 ratio format and constantly
moving. Displaying stationary graphics and images on screen,
such as the dark top and bottom letterbox bars (wide screen
pictures), should be limited to no more than 15% of the total
television viewing per week.
Picture
– Mode
– Dynamic / Standard / Movie / Custom
Contrast
Brightness
Sharpness
Color
Tint (NTSC only)
Color Tone
Reset
– Off / On
– Off / On
– Cool2 / Coolꢀ / Normal / Warmꢀ / Warm2
Wide screen format televisions (16:9, the aspect ratio of
the screen width to height) are primarily designed to view
wide screen format full-motion video. The images displayed
on them should primarily be in the wide screen 16:9 ratio
format, or expanded to fill the screen if your model offers this
feature, and constantly moving. Displaying stationary graphics
and images on screen, such as the dark side-bars on non-
expanded standard format television video and programming,
should be limited to no more than 15% of the total television
viewing per week.
– Digital NR
– DNIe Jr ✽
Sound ✽
– Mode
– Standard / Music / Movie / Speech / Custom
– Bass / Treble / Balance
Off/On
– Adjust
– Auto Volume
– Turbo Sound
-
– Off / On
Additionally, viewing other stationary images and text such as
stock market reports, video game displays, station logos, web
sites or computer graphics and patterns, should be limited as
described above for all televisions. Displaying any stationary
images that exceed the above guidelines can cause
uneven aging of picture tubes (CRTs) that leave subtle,
but permanent burned-in ghost images in the television
picture. To avoid this, vary the programming and images,
and primarily display full screen moving images, not
stationary patterns or dark bars. On television models that
offer picture sizing features, use these controls to view the
different formats as a full screen picture.
Channel
Setup
– Air/Cable
– Air / Cable
– Auto Program
– Add/Delete
– Fine Tune
– Added / Deleted
– Plug & Play
– Language ✽
– Time
– English / Español / Portugues / Français
– Clock
– On Timer
– Off Timer
– Off/On
– Child Lock
– Channel
– Lock
– Caption ✽
– Child Lock
Be careful in the selection and duration of television formats
used for viewing. Uneven CRT aging as a result of format
selection and use, as well as other burned-in images, is not
covered by your Samsung limited warranty.
– Blue Screen
– Off / On
Viewing screen size : 508mm
English - 7
This page is intentionally
left blank.
|