1. Smart phone requirements
4. Enter required information and
touch <Register> to finish
subscribing for Samsung
Hardware / Operating System
Requirements
- iOS 4.3.5/5.0
OS
Smartcam membership.
CPU
- 600MHz or higher
•
ID : Your ID, use alphanumeric
characters and “.” (full stop)
and allows 8-14 characters.
- 128MB or more (recommended),
RAM : 50MB (Minimum)
RAM
- Wi-Fi or 3G wireless communication-
enabled smart phone
•
•
User ID check : Checks
Network
whether the ID already exists.
Video Codec
- H.264
PW : Password does not
allow ‘-’ and ‘,’. Use 8-14
alphanumeric characters.
SmartCam
mobile
Recommended Smart Phones - iPhone 3Gs, 4
Recommended Tablet PC
- iPad 2
•
Confirm Password : Checks whether your password is
entered correctly.
•
•
Name : Enter your name.
for iPhone
2. Subscription
E-mail : This e-mail is used to recover your subscription if
you forgot your password.
SNH-1010N
1. Run the downloaded application.
•
•
Country : Enter your country of use.
Register : Requests registration of your information.
Download the application from the App Store and install it on
your smart phone.
2. Touch <Sign up here>.
™ Search keywords for the application: “Samsung SmartCam”,
“Smartcam”, “SAMSUNG TECHWIN”, “TECHWIN”.
3. Check to agree to the terms
and conditions, and then touch
<Next>.
6. Live Video
1. Touch the desired camera’s
Live Video
Two-way Audio
[
] or touch the <Live> icon.
g
1. Tap on the Two-way Audio icon.
2. The Mic icon will appear.
2. Enter the <Private Key> for
the camera selected. This is the
same private key you created
at the time you registered the
camera. Check the <SAVE>
option to save the private key.
Within 20 seconds, it will start
streaming.
a
b
c
d
e
f
3. Press and hold the Mic icon and start talking. Press and
hold for 2sec after finished talking to properly send the
audio over the internet.
4. You do not need to have 2-way Audio enabled to receive
audio from the camera. The Mic setting in the camera must
be set to 1 and above to have 2-way audio.
No.
Description
Capture
You can capture and save a still image from the video.
Enables high quality video (640x480 resolution).
a
b
HQ
Video and audio playback depends on the policies of
your service provider or the network connection status.
`
`
When there are multiple users logged on to the camera, first person
who tap the Talk icon will have the control.
J
Flip
Flips the video image.
c
d
Condition
Wi-Fi
Audio Support
Brightness Adjusts the screen brightness.
O
Two-way
Audio
Enable 2-way audio between the camera and the
phone.
3G
Depending on your network.
e
f
g
Relay Mode
X
`
The loading time may be longer depending on the policy of the
service provider or the network connection status.
Info
Mic
Displays current video and audio information.
M
Relay mode
Press and hold to talk. Let go to hear back from the
camera.
Depending on your network connection, peer to peer connection
may not be available. When peer to peer connection is not
available, the camera will connect in Relay Mode, which limits
the viewing to 3 minutes initially and will prompt you to extend
another 60 seconds up to three times.
`
Relay mode is added feature where the video from the camera is
transmitted to Samsung server then retransmitted to the user's
computer.
J
`
`
Audio is not supported in Relay Mode.
samsungsmartcam.com", go to support page, and refer to
“Troubleshooting” on it.
7. Event List
1. Tap on the <Event> icon to see
the YouTube and Picasa event
links.
2. Tap on the <Delete All> to clear
the event list.
YouTube icon:
Tap on the YouTube
icon to play the YouTube
video.
Picasa icon:
Tap on the Picasa icon
to see picture.
Audio
Detection icon
Motion Detection
Icon
Deleting Each Event
2. The camera must have the
Youtube and Picasa notification
enabled to have the events listed
in the Event list. The event list will
be created after the event video
and picture is created on your
YouTube or Picasa account.
1. Slide you finger right to left on
the event you want to delete.
`
Phone does not allow you to play the private videos automatically.
To see the event videos on your phone, tap on the YouTube app and
sign into your account(same YouTube account used for the Camera).
While logged in to the YouTube, touch the YouTube icon to play the
video automatically.
M
Deleting All Events
1. Tap on the <Edit> then Tap on
the <Clear>.
`
You will get a notification prompt
when event is detected by the
camera.
M
2. Tap on <Delete> to delete the
event.
8. Camera Setup
Touch the <Setup> icon to configure a camera to be monitored.
3. Configure the notification.
Time setting
•
Push Notification : Notifies
alarm events.
1. Touch <Time setting>.
2. Set the camera’s clock.
•
YouTube : Creates 30 seconds
long footage and uploads onto
the user’s YouTube account.
•
•
Time Zone : Select your region.
Summer Time : Check this
option if you live in a country
or region where DST(Daylight
Saving Time) is applied.
•
Picasa : Sends event images
to the user’s Picasa account.
4. Touch <Apply>.
Network setting
9. Auto Login Setup
1. Touch the <Network setting>.
General setting
2. Configure the wireless network.
1. Move to the <Setup> item.
1. Touch <General setting>.
•
Wi-Fi : Shows the list of
available access points.
2. Enable <Auto Login> to login
automatically from the next
application running.
2. Configure the basic camera
settings.
-
: Connecting to the AP
requires password.
•
Camera Name : Camera name
is used to easily identify the
camera when you have more
than one. i.e., Living room,
Kitchen, Bedroom.
-
: Connecting to the AP
requires no password.
•
Other WiFi Networks : Enter
the SSID name and password
to connect to the network.
•
Event Alarm : Specify whether
to trigger the alarm or not, and
specify the sensitivity.
If selected, it shows guide on SSID and networking
procedures.
The higher the sensitivity is, the
subtler motion/audio events will be detected.
10. Info.
•
•
Night Vision : Set the IR lighting.
Enable <Night Vision> for the camera to switch
automatically to night vision mode.
1. Move to the <Info.> item.
2. Shows the information on
Samsung Techwin Smartcam
Application.
vX.XX
Audio : Adjust the volume of the built-in microphone and
speaker of the camera as appropriate.
XXXX.X.XX.
|