DVD Player
DVD-P248A
AK68-00435B
General Features
Disc Type and Characteristics
Excellent Sound
Note
This DVD player is capable of playing the following types of discs with the corresponding
logos:
Dolby Digital, a technology developed by Dolby
Laboratories provides crystal clear sound
reproduction.
* Discs which cannot be played with this player.
• DVD-ROM
• CD-ROM
• CDI
• DVD-RAM
• CDV
Recording Types Disc Size Max. Playing Time
Characteristics
Disc Types (Logos)
Screen
• HD layer of super Audio CD
• CDGs play audio only, not graphics.
• DVD contains excellent sound and
video due to Dolby Digital and
MPEG-2 system.
Single-sided 240 min.
DVD
Video with MPEG-2 compression technology.
Both regular and widescreen(16:9) pictures can be
viewed.
12 Cm
Double-sided 480 min.
Audio
+
* Ability to play back may depend on recording
conditions.
• Various screen and audio functions
can be easily selected through the
on-screen menu.
Single-sided 80 min.
Video
8 Cm
Double-sided 160 min.
Slow Motion
An important scene can be viewed in slow motion.
• DVD-R, +R
• CD-RW
• DVD+RW, -RW
VIDEO-CD
AUDIO-CD
Programmed Play
* It may not play CD-R, CD-RW and DVD-R in all
cases due to the type of disc or condition of the
recording.
74 min.
20 min.
12 Cm
8 Cm
Audio
+
Video
• Video with CD sound, VHS
quality & MPEG-1 compression
technology.
You can program tracks to play in desired order.
(CD)
Parental Control
The parental control allows users to set the level
necessary to prohibit children from viewing harmful
movies such as those with violence, adult subject
matter, etc.
COPY PROTECTION
Many DVD discs are encoded with copy
protection. Because of this, you should only
connect your DVD player directly to your TV, not
to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected DVD discs.
• CD is recorded as a Digital
Signal with better audio quality,
less distortion and less
deterioration of audio quality
over time.
74 min.
20 min.
12 Cm
8 Cm
Audio
Various On-Screen Menu Functions
You can select various languages (Audio/Subtitle)
and screen angles while enjoying movies.
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
EZ VIEW
Easy View can convert Letter Box images to
full screen viewing on your conventional TV.
Disc Markings
Play Region Number
Both the DVD player and the discs are coded by region.
These regional codes must match in order for the disc to
play. If the codes do not match, the disc will not play.
~
Play Region Number
Digital Photo Viewer (JPEG)
You can view the Digital Photos on your TV.
NTSC broadcast system in U.S.A, Canada,
Korea, Japan, etc.
The Region Number for this player is described on the
rear panel of the player.
authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
NTSC
Repeat
You can repeat a song or movie simply by pressing
the REPEAT button.
Dolby Digital disc
Stereo disc
PROGRESSIVE SCAN OUTPUTS (525p/625p)
STEREO
MP3/WMA
This unit can play discs created from MP3/WMA
files.
“CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE, IN CASE OF 525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMEND-
ED THAT THE USER SWITCH THE CONNECTION
TO THE ‘STANDARD DEFINITION’ OUTPUT.
IF THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL 525p AND
625p DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.”
DIGITAL
SOUND
Digital Audio disc
Instant Replay
DTS disc
MP3 disc
This function is used to replay the previous
10 seconds of the movie from the current
position.
Instant Skip
This function skips playback ahead 10
seconds.
ENG-4
ENG-5
Description-Front Panel
Description-Rear Panel
STANDBY/ON
EZ VIEW
Pr
Pb
Y
COAXIAL
COMPONENT VIDEO OUT
OPTICAL
1
2
3 4 5 6
8
7
9
R
L
ANALOG AUDIO OUT
VIDEO OUT
S-VIDEO OUT
Front Panel Controls
1. STANDBY/ON (
• When the unit is first plugged in, the indica-
tor lights. When STANDBY/ON is pressed
on again, the light goes out and the player
is turned on.
)
5. SKIP (
) / SEARCH
• Allows you to search forward through a disc.
1
2
3
4
5
Use to skip the title, chapter or track.
6. EZ VIEW
2. SKIP (
) / SEARCH
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
Rear Panel
• Allows you to search backward through a disc.
Use to skip the title, chapter or track.
1. DIGITAL AUDIO OUT JACKS
7. OPEN/CLOSE (
• Press to open and close the disc tray.
)
5. COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with
Component Video in jacks. These jacks provide
Pr, Pb and Y video. Along with S-Video,
Component Video provides the best picture
quality.
• If Component(P-SCAN) Video Output is select-
ed in Setup Menu, progressive scan mode will
work.
• Use either an optical or coaxial digital cable to
connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains
a Dolby Digital or DTS decoder.
3. STOP (
)
• Stops disc play.
8. DISPLAY
• Operation indicators are displayed here
4. PLAY/PAUSE (
)
.
• Begin or pause disc play.
9. DISC TRAY
• Place the disc here.
2. ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your
television, audio/video receiver.
• If Component(I-SCAN) Video Output is selected
in Setup Menu, interlaced scan mode will work.
3. VIDEO OUT JACK
• Use a video cable to connect to the Video input
Display Indicators
jack on your television.
• The Video Output in Setup Menu must be set to
the Component(I-SCAN) or S-Video.
Important Note
• Consult your TV User’s Manual to find out if your
TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV
User’s Manual’s instructions regarding Progressive
Scan settings in the TV’s menu system.
1
4. S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to
the S-Video jack on your television for a higher
picture quality.
• The Video Output in Setup Menu must be set to
the S-Video.
• If Component(P-SCAN) Video Output is selected
in Setup Menu, Video and S-Video will not work.
2
3
Front Panel Display
1. Disc type indicators
• See page 28 to get more information on how to
use the Setup Menu.
2. Play / Pause / Forward play
3. Displays various messages concerning operations such as PLAY, STOP, LOAD ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc information.
ENG-6
ENG-7
Tour of the Remote Control
Choosing a Connection
6. STOP Button (
7. MENU Button
)
The following shows examples of connections commonly used to connect the DVD player with a TV
and other components.
• Brings up the DVD player’s setup menu.
1
2
11
Before Connecting the DVD Player
8. RETURN Button
• Returns to a previous menu.
• Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for more information on those
particular components.
9. REPEAT A-B Button
• Use to mark a segment to repeat between A and B.
Connection to an Audio
12
13
14
3
4
5
10. SUBTITLE Button
11. OPEN/CLOSE (
) Button
Method 1
Method 2
• To open and close the disc tray.
15
16
6
7
12. CLEAR Button
• Use to remove menus or status displays from the
screen.
17
18
AUDIO
SYSTEM
8
13. INSTANT REPLAY Button
• This function is used to replay the previous 10
seconds of the movie from the current position.
2ch Amplifier
Dolby Digital Decoder
Digital Audio Input Jack
Audio Input Jacks
14. INSTANT SKIP Button
9
19
• This function skips playback ahead 10 seconds.
20
21
22
10
15. PLAY/PAUSE Button (
)
• Begin/Pause disc play.
16. INFO Button
• Displays the current disc mode.
OR
17. DISC MENU Button
• Brings up the Disc menu.
18. ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Buttons)
• This button functions as a toggle switch.
DVD Function Buttons
DVD
Player
OPTICAL
1. DVD POWER Button
• Turns the power on or off.
R
L
ANALOG AUDIO OUT
19. EZ VIEW Button
COAXIAL
• Easy View can convert Letter Box images to full
screen viewing on your conventional TV.
Analog Audio Out
Digital Audio Out
2. NUMBER Buttons
20. REPEAT Button
3. PROG Button
• Allows you to program a specific order.
• Allows you to repeat play a title, chapter, track, or
disc.
4. STEP Button
• Advances play one frame at a time.
21. ANGLE Button
• Use to access various camera angles on a DVD.
5. SEARCH/SKIP Buttons (
/
,
/
)
22. AUDIO Button
• Allows you to search forward/backward through
• Use this button to access various audio functions
on a disc.
a disc. Use to skip the title, chapter or track.
ENG-8
ENG-9
Choosing a Connection
Playing a Disc
7. Step Motion Play (Except CD)
Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will
appear.
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Before Play
• Turn on your TV and press the TV/VIDEO button
to select the video mode.
• Turn on your Audio System and select AUX, CD or
DVD.
Method 1
Method 2
Method 3
Method 4
- No sound is heard during STEP mode.
- Press the PLAY/PAUSE (
) to resume normal play.
Optimum
picture
Best
picture
Good
Better
picture
(You can only perform step motion play in the forward
direction.)
Basic Audio
picture
After plugging in the player, the first time you press
the DVD POWER button, this screen comes up :
If you want to select the language, press a
NUMBER button. (This screen will only appear
when you plug in the player for the first time.)
8. Slow Motion Play (Except CD)
TV
Press and hold the
button on the remote during
PAUSE or STEP mode. Press again and you can select
slow motion play for 1/8, 1/4 and 1/2 of normal speed.
- No sound is heard during slow mode.
AV
Cable
S-Video
Cable
Video
Cables
- Press the PLAY/PAUSE (
) to resume normal play.
- Reverse slow motion play will not work.
OR
OR
RESUME function
When you stop disc play, the player remembers
where you stopped, so when you press the
DVD
Player
PLAY (
) again, it will pick up where you left off.
Pr
Pb
Y
Pr
Pb
Y
(unless the disc is removed or the player is
R
L
VIDEO OUT
ANALOG AUDIO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
COMPONENT VIDEO OUT
Play
unplugged, or if you press the STOP (
twice.)
) button
Component Video
Jacks
(Progressive)
Component Video
Jacks
(Interlace)
Audio Output
Jacks
Video Output
Jack
S-Video
Jack
1. Press the OPEN/CLOSE button.
The STANDBY indicator light goes out and the tray
opens.
Note
Method 1
• If the player is left for 5 minutes in pause mode, it
will stop.
DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to the S-Video or Component(I-SCAN).)
2. Place a disc gently into the tray with the disc’s
label facing up.
• If the player is left in the stop mode for more than
30 minutes, the power will automatically shut off.
(Automatic Power-Off Function)
Method 2
3. Press the PLAY/PAUSE (
) button or
OPEN/CLOSE button to close the disc tray.
DVD Player + TV with S-Video Input Jack
(The Video Output in Setup Menu must be set to the S-Video.)
• If the player is left in the stop mode for more than
one minute without any user interaction, a screen
4. Stopping Play
Press the STOP (
Method 3
saver will be activated. Press the PLAY (
button to resume normal play.
)
) button during play.
DVD Player + TV with interlace Scan Component Video Jacks
(The Video Output in Setup Menu must be set to the Component(I-SCAN).)
5. Removing Disc
Press the OPEN/CLOSE button.
• This
icon indicates an invalid button press.
Method 4
DVD Player + TV with Progressive Scan Component Video Jacks.
(The Video Output in Setup Menu must be set to the Component(P-SCAN).)
• If you want to convert Video Output to the Progressive Scan, you have to first connect Video or S-Video on
your TV. Then select Component(P-SCAN)(480p) out of Video Output in Setup Menu. Within 10 seconds,
change the TV’s external input to 525p(480p or Component) and select “Yes” (See Page 28).
6. Pausing Play
Press the PLAY/PAUSE (
remote during play.
- Screen stops, no sound.
- To resume, press the PLAY/PAUSE (
again.
) or STEP button on the
) button once
• If Component(P-SCAN) Video Output is selected in Setup Menu, Video(Composite) and S-Video will not work.
Important Note
• Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual’s instructions regarding Progressive Scan
settings in the TV’s menu system.
• Depending on your TV, the Method of connection may differ from the illustration above.
ENG-10
ENG-11
Using the Search & Skip Functions
Using the Display Function
Using the Display Function
Using the Disc and Title Menu
To access the desired title when there is
During play, you can search quickly through a
chapter or track or use the skip function to
jump to the next selection.
When Playing a DVD/VCD/CD
1. During play, press the INFO button on the
remote.
Using the Disc Menu
more than one in the disc.
For example, if there is more than one
movie on a DVD, each movie will be
identified.
Title
1. During the playback of a DVD disc, press the
MENU button on the remote.
2. Use the UP/DOWN buttons to select the desired
item.
2. Select Disc Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
Searching through a Chapter or Track
Press the
or
button on the remote for more
Most DVD discs are recorded in
chapters so that you can quickly find a
specific passage (similar to tracks on an
audio CD).
3. Use the LEFT/RIGHT buttons to make the
desired setup and then press ENTER.
• You may use the number buttons of the remote
control to directly access a title, chapter or to
start the playback from the desired time.
than 1 second and press again to search at a faster
speed on the DVD, VCD or CD.
Chapter
DVD 2X, 8X, 32X, 128X
VCD 4X, 8X
Allows playback of the film from a
desired time. You must enter the starting
time as a reference.
4. To make the screen disappear, press the INFO
button again.
Time
Audio
CD 2X, 4X, 8X
Refers to the language of the film
soundtrack. In the example, the
soundtrack is played in English 5.1CH.
A DVD disc can have up to eight
different soundtracks.
DVD
Skipping Tracks
DVD
Using the Title Menu
01
Title
During play, press the
• When playing a DVD, if you press the
moves to the next chapter. If you press the
or
button.
button, it
button, it
02
1. During the playback of a DVD disc, press the
MENU button on the remote.
Chapter
0:00:13
Time
ENG 5.1CH
Audio
2. Select Title Menu using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
Off
Refers to the subtitle languages
available in the disc.
Subtitle
moves to the beginning of the chapter. One more press
makes it move to the beginning of the previous chapter.
ENTER
Subtitle
You will be able to choose the subtitle
languages or, if you prefer, turn them off
from the screen.
A DVD disc can have up to 32 different
subtitles.
• When playing a VCD 2.0 in MENU OFF mode, a CD, if
you press the
you press the
button, it moves to the next track. If
button, it moves to the
VCD
beginning of the track. One more press makes it move to
the beginning of the previous track.
VCD
01
Track
• When playing a VCD 2.0 in MENU OFF mode, if a track
0:00:48
Time
ENTER
exceeds 15 minutes when playing a VCD and you press
the
button, it moves forward 5 minutes.
Note
If you press the
button, it moves backward 5 minutes.
* When in VCD 2.0 mode (MENU ON mode), this
function does not work. (See page 12)
Note
Note
CD
• Depending on the disc, the Title and Disc Menus
may not work.
* When playing a VCD 2.0, you can choose MENU
ON or MENU OFF by using the DISC MENU
button.
CD
01
Track
• Title Menu will only be displayed if there are at
least two titles in the disc.
0:00:48
Time
ENTER
• You can also use the Disc Menu, using the DISC
MENU button on the remote.
• In VCD 2.0, the DISC MENU button is used to
select Menu On or Menu Off mode.
ENG-12
ENG-13
Using the Function Menu
Repeat Play
Program Play & Random Play
Slow Repeat Play
Using the Function Menu
Repeat the current track, chapter, title, a
chosen section (A-B), or all of the disc.
Program Play (CD)
This feature allows you slowly to repeat
scenes containing sports, dancing, musical
instruments being played etc. so you can
study them more closely.
1. Press the MENU button during playback.
1. Press the PROG button.
2. Use the UP/DOWN buttons to highlight Function,
then press the RIGHT or ENTER button.
2. Use the LEFT/RIGHT buttons to select
PROGRAM. Press the ENTER button.
When playing a DVD/VCD/CD
1. Press the REPEAT button on the remote.
Repeat screen appears.
When playing a DVD/VCD
3. Use the LEFT/RIGHT/UP/DOWN buttons to
select the first track to add to the program.
Press the ENTER button. The selection numbers
appear in the Program Order box.
3. Function selection screen appears: Info, Zoom,
Bookmark, Repeat and EZ View.
1. During play, press the PLAY/PAUSE (
button.
)
2. Select Chapter, Title or A-B using the
LEFT/RIGHT buttons.
-
-
-
-
-
Info (See Page 12~13)
Zoom (See Page 20)
Bookmark (See Page 19)
Repeat (See Page 14)
EZ View (See Page 16)
2. Press and hold the
button on the remote
• Chapter (
) : repeats the chapter that is playing.
4. Press the PLAY/PAUSE (
The disc will be played in programmed order.
) button.
• Title ( T ) : repeats the title that is playing.
• A-B : repeats a segment of the disc that you select.
during PAUSE or STEP mode. Press again and
you can select slow motion play for 1/8, 1/4 and
1/2 of normal speed.
DVD
PROGRAM
RANDOM
4. Use the UP/DOWN button to highlight one of the
5 functions. Then press the RIGHT or ENTER
button to access the function.
3. Press the REPEAT A-B button to select the point
where the function starts. (A)
REPEAT ENTER
Off
01
01 A - B
T
4. Press the REPEAT A-B button to select the point
where the function ends. (B)
PROGRAM 01
VCD/CD
Track
Program Order
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
REPEAT ENTER
Off
T
01
D
01 A - B
Note
• The disc will play from A to B repeatedly at the
speed you chose.
ENTER
RETURN
CLEAR
• To terminate the function, press the 'CLEAR' but-
ton or the 'REPEAT A-B' button again.
3. Press ENTER.
• A-B REPEAT does not allow you to set point (B)
until at least 5 seconds has elapsed after point (A)
has been set.
4. To return to normal play, press REPEAT again,
then press the LEFT/RIGHT buttons to select Off
and press ENTER.
Random Play (CD)
1. Press the PROG button.
Note
• When in VCD 2.0 mode (MENU ON mode), this
function does not work. (See page 12)
2. Use the LEFT/RIGHT buttons to select RANDOM.
Press the ENTER button.
• You can also directly select the parts of these
functions using their respective buttons on the
remote.
* REPEAT A-B button
• Press the REPEAT A-B button to select the point where
the function starts. (A)
• Press the REPEAT A-B button to select the point where
the function ends. (B)
PROGRAM
RANDOM
• To terminate the function, press the 'CLEAR' button or
the 'REPEAT A-B' button again.
• A-B REPEAT does not allow you to set point (B) until at
least 5 seconds has elapsed after point (A) has been
set.
Note
• Depending on the disc, the Program and Random
Play functions may not work.
Note
• DVD repeats play by chapter or title, CD and VCD
repeat play by disc or track.
• PROGRAM/RANDOM playback cannot be used if
the disc contains more than two types of file
extensions.
• To terminate the function, press the CLEAR
button.
• This unit can support a maximum of 20
programmed tracks.
• Depending on the disc, the Repeat function may
not work.
• While in playback mode, press the CLEAR button
on the remote control to cancel Programmed Play
or Random Play.
• When in VCD 2.0 mode (MENU ON mode), this
function does not work. (See page 12)
ENG-14
ENG-15
Adjusting the Aspect Ratio (EZ View)
Selecting the Audio Language
Selecting the Subtitle Language
To play back using aspect ratio (DVD)
Press the EZ VIEW button.
If you are using a 4:3 TV
You can select a desired language quickly and
easily with the AUDIO button.
You can select a desired subtitle quickly and
easily with the SUBTITLE button.
1. For 16:9 aspect ratio discs
• The screen size changes when the button is
pressed repeatedly.
• The screen zoom mode operates differently
depending on the screen setting in the initial setup
menu.
• To ensure correct operation of the EZ VIEW
button, you should set the correct aspect ratio in
the initial setup (See page 27).
• 4:3 Letter Box
Using the AUDIO button
Using the SUBTITLE button
Displays the content of the DVD title in 16:9
aspect ratio. The black bars will appear at the
top and bottom of the screen.
1. Press the AUDIO button.
1. Press the SUBTITLE button.
2. The Audio changes when the button is pressed
repeatedly.
- The audio languages are represented by abbreviations.
2. The subtitle changes when the button is pressed
repeatedly.
• 4:3 Pan Scan
The left and right of the screen are cut off and
displays the central portion of the 16:9 screen.
3. To turn off the display, press the CLEAR or
RETURN button.
- Initially, the subtitle will not appear on screen.
- The subtitle languages are represented by
abbreviations.
3. Press the AUDIO button to select Stereo, Left or
Right. (On VCD/CD)
• Screen Fit
The top and bottom of the screen are cut off
and the full screen appears.
The picture will look vertically stretched.
If you are using a 16:9 TV
1. For 16:9 aspect ratio discs
DVD
•
Wide Screen
Displays the content of the DVD title in 16:9
aspect ratio.
• Zoom Fit
AUDIO
ENG DOLBY DIGITAL 5.1CH
SUBTITLE
ENG
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
• Screen Fit
The top and bottom of the screen are cut off.
When playing a 2.35:1 aspect ratio disc, the
black bars at the top and bottom of the screen
will disappear. The picture will look vertically
stretched. (Depending on the type of disc, the
black bars may not disappear completely.)
2. For 4:3 aspect ratio discs
• Normal Screen
Displays the content of the DVD title in 4:3
aspect ratio.
VCD/CD
SUBTITLE
Off
• Screen Fit
The top and bottom of the screen are cut off
and the full screen appears.
The picture would look vertically stretched.
• Zoom Fit
AUDIO
Stereo
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
• Zoom Fit
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
2. For 4:3 aspect ratio discs
• Normal Wide
Displays the content of the DVD title in 16:9
aspect ratio. The picture will look horizontally
stretched.
Note
Note
• Screen Fit
The top and bottom of the screen are cut off
and the full screen appears.
The picture will look vertically stretched.
Note
• This function depends on what languages are
encoded on the disc and may not work with all
DVDs.
• This function depends on what languages are
encoded on the disc and may not work with all
DVDs.
• This function may behave differently depending on
the type of disc.
• A DVD disc can contain up to 8 audio languages.
• A DVD disc can contain up to 32 subtitle
languages.
• Zoom Fit
• How to have the same audio language come up
whenever you play a DVD;
Refer to “Setting Up the Language Features” on
page 25.
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
• How to have the same subtitle language come
up whenever you play a DVD;
Refer to “Setting Up the Language Features” on
page 25.
• Vertical Fit
When a 4:3 DVD is viewed on a 16:9 TV, black
bars will appear at the left and right of the
screen in order to prevent the picture from
looking horizontally stretched.
ENG-16
ENG-17
Changing the Camera Angle
Using the Instant Replay/Skip Function
Using the Bookmark Function
When a DVD contains multiple angles of a
particular scene, you can select the Angle
function.
Using the Instant Replay function (DVD)
This feature lets you bookmark sections of a
DVD or VCD (MENU OFF mode) so you can
quickly find them at a later time.
Recalling a Marked Scene
If you miss a scene, you can see it again using
this function.
1. During play, press the MENU button on the
remote and select the Bookmark.
Using the ANGLE button
If you press the INSTANT REPLAY button, the
current scene moves backward about 10 seconds,
and plays back.
Using the Bookmark Function (DVD/VCD)
2. Use the LEFT/RIGHT buttons to select a marked
scene.
Press the ANGLE button to see if an ANGLE
1. During play, press the MENU button on the
remote.
(
) mark is present at the upper left hand
3. Press the PLAY/PAUSE (
the marked scene.
) buttons to skip to
* Depending on the disc, the Instant Replay function may
not work.
corner of the screen.
2. Use the UP/DOWN buttons to highlight Function,
then press the RIGHT or ENTER button.
1. When an ANGLE mark is shown, press the
ANGLE button, then an ANGLE select icon will
appear at the upper hand corner of the screen.
3. Select Bookmark using the UP/DOWN buttons,
then press the RIGHT or ENTER button.
2. Press the ANGLE button to select the desired
screen angle.
4. Use the LEFT/RIGHT buttons to move to the
desired bookmark icon.
3. To turn off the display, press the CLEAR or
RETURN button.
5. When you reach the scene you want to mark,
press the ENTER button. The icon will change to
a number (1, 2, or 3).
ANGLE
4/6
Clearing a Bookmark
1. During play, press the MENU button on the
remote and select the Bookmark.
Using the Instant Skip function (DVD)
Use this function to skip playback about 10
seconds ahead of the current scene.
2. Use the LEFT/RIGHT buttons to select the
bookmark number you want to delete.
Press the INSTANT SKIP button.
3. Press the CLEAR button to delete a bookmark
number.
- Playback will skip ahead 10 seconds.
- Depending on the disc, this function may not work.
Note
• If the disc has only one angle, this feature won’t
work. Currently, very few discs have this feature.
Note
• Up to three scenes may be marked at a time.
• When in VCD 2.0 mode (MENU ON mode), this
function does not work. (See page 12)
• Depending on the disc, the Bookmark function may
not work.
ENG-18
ENG-19
Using the Zoom Function
Clips Menu for MP3/WMA/JPEG
Folder Selection
MP3/WMA Play
1. Open the disc tray.
1. Open the disc tray.
Using the Zoom Function (DVD/VCD)
The folder can only be selected in the Stop
mode.
2. Place the disc on the tray.
- Place the disc with the labeled side up.
2. Place the disc on the tray.
- Place the disc with the labeled side up.
1. During play or pause mode, press the MENU
button on the remote.
• To select the Parent Folder
Press the RETURN button to go to parent folder,
or use the UP/DOWN buttons to select “..” and
press ENTER to go to the parent folder.
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
3. Close the tray.
- The tray closes and you should get a screen
that looks like the one below.
2. Use the UP/DOWN buttons to highlight Function,
then press the RIGHT or ENTER button.
3. Select Zoom using the UP/DOWN buttons, then
press the RIGHT or ENTER button.
• To select the Peer Folder
MP3/WMA Play Function
Use the LEFT/RIGHT buttons to highlight left
window. Use the UP/DOWN buttons to select the
desired folder, then press ENTER.
O ff
4. Use the UP/DOWN or LEFT/RIGHT buttons to
select the part of the screen you want to zoom in
on.
1. Select the desired folder.
00:00:23
1_mp3
2. Use the UP/DOWN or LEFT/RIGHT buttons to
select a song file.
• To select the Sub-Folder
5. Press the ENTER button.
- During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
B e c a u s e Yo u
C a c t u s
Use the LEFT/RIGHT buttons to highlight right
window. Use the UP/DOWN buttons to select the
desired folder, then press ENTER.
Sad Day
3. Press ENTER to begin playback of the song file.
- During VCD play, press ENTER to zoom in 2X/Normal
in order.
O ff
00:00:23
1_mp3
Root
Parent Folder, Current Folder Folders and Files in
and Peer Folders Current Folder
WMA
JPEG
B e c a u s e Yo u
C a c t u s
Sad Day
MP3
Parent Folder
•
•
•
: Name of currently playing file.
: Current Playback Time.
MUSIC
Current Folder
1st
Sub-Folders
Repeat/Random playback
2nd
: Current Playback Mode : There are 4
modes, toggle by the REPEAT button.
- Off : Normal Playback
- Track : Repeats the current track.
- Folder : Repeats the current folder.
- Random : Files in the disc will be played
in random order.
Press the REPEAT button to change playback
mode. There are 4 modes, Off, Track, Folder and
Random.
SONG FILE
SONG FILE
1
2
Peer Folders
- Off : Normal Playback
- Track : Repeats the current song file.
- Folder : Repeats the song files which have the
same extension in the current folder.
- Random : Song files which have the same
extension will be played in random
order.
SONG FILE
3
•
•
•
•
•
: MP3 file icon.
: WMA file icon.
: JPEG file icon.
: Folder icon.
* To resume normal play, press the CLEAR button.
: Current Folder icon.
ENG-20
ENG-21
MP3/WMA Play
Picture CD Playback
Picture CD Playback
Using the Setup Menu
1. Select the desired folder. (See page 21 to select
the folder)
Note
CD-R MP3/WMA discs
When you record MP3 or WMA files on the CD-R,
please refer to the following.
The Setup menu lets you customize your DVD
player by allowing you to select various
language preferences, set up a parental level,
even adjust the player to the type of television
screen you have.
• If no buttons on the remote control pressed for 10
seconds, the menu will disappear.
Press the INFO button on the remote control to
display the menu again.
• Press the STOP button to return to the clips menu.
• When playing a Kodak Picture CD, the unit
2. Use the UP/DOWN buttons to select a Picture file in
clips menu and then press the ENTER button. You
should get a screen that looks like the one below.
• Your MP3 or WMA files should be ISO 9660 or JOLIET
format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows, and with
Apple's Mac. This format is the most widely used.
1. With the unit in Stop mode, press the MENU
button on the remote. Select Setup using
UP/DOWN buttons, then press the RIGHT or
ENTER button.
ENTER RETURN
displays the Photo directly, not the clips menu.
• When naming your MP3 or WMA files, do not exceed 8
characters, and enter ".mp3, .wma" as the file
extension.
General name format of: Title.mp3. or Title.wma. When
composing your title, make sure that you use 8 characters
or less, have no spaces in the name, and avoid the use of
special characters including: (.,/,\,=,+).
CD-R JPEG Discs
Language Setup : Setup of the Language.
• Only files with the “.jpg” and “.JPG” extensions can be
played.
Audio Setup : Setup of the Audio Options
• Use the INFO button on the remote control to select
the menu you want to view and then press the
ENTER button.
• If the disc is not closed, it will take longer to start
playing and not all of the recorded files may be
played.
Display Setup : Setup of the Display Options
Use to select which type of screen you want to
watch and several display options.
• Use a decompression transfer rate of at least 128
Kbps when recording MP3 files.
•
: Returns to the Album Screen.
• Only CD-R discs with JPEG files in ISO 9660 or Joliet
format can be played.
Parental Setup : Setup of the Parental Level
Allows users to set the level necessary to
prevent children from viewing unsuitable
movies such as those with violence, adult
subject matter, etc.
Sound quality with MP3 files basically depends on the rate
of compression/decompression you choose. Getting CD
audio sound requires an analog/digital sampling rate, that
is conversion to MP3 format, of at least 128 Kbps and up
to 160 Kbps. However, choosing higher rates, like 192
Kbps or more, only rarely give better sound quality.
Conversely, files with decompression rates below 128
Kbps will not be played properly.
• To see the next 6 pictures, press the
button.
button.
• The name of the JPEG file may not be longer than 8
characters and should contain no blank spaces or
special characters (. / = +).
• To see the previous 6 pictures, press the
•
: Each time the ENTER button is pressed, the
• Only a consecutively written multisession disc can be
played. If there is a blank segment in the multisession
disc, the disc can be played only up to the blank
segment.
picture rotates 90 degrees clockwise.
•
: Each time the ENTER button is pressed, the
picture is enlarged up to 4X.
Disc Menu
Title Menu
(Normal ➝ 2X ➝ 4X ➝ 2X ➝ Normal)
• Use a decompression transfer rate of at least 64Kbps
when recording WMA files.
• A maximum of 500 images can be stored on a single
CD.
•
: The unit enters slide show mode.
Sound quality with WMA files basically depends on the
rate of compression/decompression you choose.
Getting CD audio sound requires an analog/digital
sampling rate, that is conversion to WMA format, of at
least 64Kbps and up to 192Kbps.
Function
Setup
• Kodak Picture CDs are recommended.
*Before the Slide Show begin, the picture interval must
be set.
• When playing a Kodak Picture CD, only the JPEG
files in the pictures folder can be played.
• Kodak Picture CD : The JPEG files in the pictures
folder can be played automatically.
ENTER RETURN
TIMER:
Conversely, files with decompression rates below 64Kbps
or over 192Kbps will not be played properly.
2. Use the UP/DOWN buttons on the remote to
access the different features.
• Konica Picture CD : If you want to see the Picture,
select the JPEG files in the clips menu.
•
Do not try recording copyright protected MP3 files.
Certain "secured" files are encrypted and code protected
to prevent illegal copying. These files are of the following
types: Windows MediaTM (registered trade mark of
Microsoft Inc) and SDMITM (registered trade mark of The
SDMI Foundation). You cannot copy such files.
• Fuji Picture CD : If you want to see the Picture, select
the JPEG files in the clips menu.
3. Press the ENTER or RIGHT button to access the
sub features.
• QSS Picture CD : The unit cannot play QSS Picture
CD.
•
: When this icon is selected and ENTER is
pressed, the pictures change automatically
with about 6 seconds interval.
To make the setup screen disappear after setting
up, press the MENU button again.
• If a number of files in 1 Disc are over 3000, only 3000
JPEG file can be played.
• Important: The above recommendations cannot be taken
as a guarantee that the DVD player will play MP3
•
•
: The pictures change automatically with about
12 seconds interval.
recordings, or as an assurance of sound quality. You
should note that certain technologies and methods for
MP3 file recording on CD-Rs prevent optimal playback of
these files on your DVD player (degraded sound quality
and in some cases, inability of the player to read the files).
• If a number of folders in 1 Disc are over 300, only
JPEG files in 300 folders can be played.
Note
Depending on the disc, some Setup Menu
selections may not work.
: The pictures change automatically with about
18 seconds interval.
*Depending on the file size, each interval between
images may take longer or shorter than the manual
suggests.
• This unit can play a maximum of 3000 files and 300
folders per disc.
ENG-22
ENG-23
Setting Up the Language Features
Setting Up the Language Features
If you set the player menu, disc menu, audio
and subtitle language in advance, they will
come up automatically every time you watch a
movie.
Using the Disc Menu Language
Using the Audio Language
Using the Subtitle Language
This function changes the text language only on the
disc menu screens.
1. With the unit in Stop mode, press the MENU
button.
1. With the unit in Stop mode, press the MENU
button.
1. With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
RIGHT or ENTER button.
Using the Player Menu Language
1. With the unit in Stop mode, press the MENU
button.
2. Select Setup using UP/DOWN buttons, then
RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Audio using UP/DOWN buttons, then
press the RIGHT or ENTER button.
4. Select Subtitle using UP/DOWN buttons, then
press the RIGHT or ENTER button.
3. Select Language Setup using UP/DOWN
buttons, then press the RIGHT or ENTER button.
4. Select Disc Menu using UP/DOWN buttons, then
press the RIGHT or ENTER button.
5. Press the UP/DOWN buttons to select ‘English’.
- Select “Original” if you want the default soundtrack
language to be the original language the disc is
recorded in.
5. Use the UP/DOWN buttons to select ‘English’.
- Select “Automatic” if you want the subtitle language to
be the same as the language selected as the audio
preference.
e.g) Setting up in English.
5. Use the UP/DOWN buttons to select ‘English’.
- Select “Others” if the language you want is not listed.
- Select “Others” if the language you want is not listed.
- Select “Others” if the language you want is not listed.
Some discs may not contain the language you select
as your initial language; in that case the disc will use its
original language setting.
e.g) Setting up in English.
AUDIO LANGUAGE
Audio
4. Select Player Menu using UP/DOWN buttons,
then press the RIGHT or ENTER button.
Original
Others
LANGUAGE SETUP
6. Press the ENTER button.
- English is selected and the screen returns to SETUP
menu.
6. Press the ENTER button.
- English is selected and the screen returns to SETUP
menu.
6. Press the ENTER button.
- English is selected and the screen returns to SETUP
menu.
5. Use the UP/DOWN buttons to select ‘English’.
Note
• If the selected language is not recorded on the
disc, the original pre-recorded language is
selected.
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
6. Press the ENTER button.
- English is selected and the screen returns to SETUP
menu.
- To make the SETUP menu disappear, press the
RETURN or LEFT button.
ENG-24
ENG-25
Setting Up the Audio Options
Setting Up the Display Options
1. With the unit in Stop mode, press the MENU button.
PCM Down Sampling
1. With the unit in Stop mode, press the MENU button.
Still Mode
1. On : Select this when the amplifier connected to the
player is not 96KHz compatible. In this case, the
96KHz signals will be down converted to 48KHZ.
These options will help prevent picture shake in still
mode and display small text clearer.
2. Select Setup using UP/DOWN buttons, then
RIGHT or ENTER button.
2. Select Setup using UP/DOWN buttons, then
RIGHT or ENTER button.
1. Auto : When selecting Auto, Field/Frame mode will be
automatically converted.
2. Off : Select this when the amplifier connected to the
player is 96KHz compatible. In this case, all
signals will be output without any changes.
3. Select Audio Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
3. Select Display Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
2. Field : Select this feature when the screen shakes in
the Auto mode.
3. Frame : Select this feature when you want to see
small letters more clearly in the Auto mode.
Note
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
Screen Messages
Use to turn on-screen messages On or Off.
• Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Black Level
Adjusts the brightness of the screen.(On/Off)
• “DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
TV System
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
4. Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.
1. NTSC Disc : In case of using NTSC disc
• If your TV system only has PAL-Video input you
must choose “PAL”. When you choose “PAL”,
Interlace output format is PAL 60 Hz output.
TV Aspect
Depending on the type of television you have, you may
want to adjust the screen setting (aspect ratio).
AUDIO SETUP
• If your TV system only has NTSC, input you must
choose “NTSC Output”.
Digital Output
DTS
:
:
:
:
PCM
Off
1. 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
Dynamic Compression
PCM Down Sampling
On
2. PAL Disc : In case of using PAL disc
• If your TV system only has NTSC-Video input, you
must choose “NTSC Output”.
On
2. 4:3 Pan Scan : Select this for conventional size TVs
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
• If your TV system only has PAL input, you must
choose “PAL Output”.
3. 16:9 Wide : You can view the full 16:9 picture on your
widescreen TV.
Dolby Digital Output
DISPLAY SETUP
1. PCM : Converts to PCM(2CH) 48kHz audio. Select
PCM when using the Analog Audio Outputs.
TV Aspect
:
:
:
Wide
Auto
On
Still Mode
DISPLAY SETUP
Screen Messages
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when using the
Digital Audio Output.
Black Level
TV System
Video Output
:
:
:
On
NTSC
S-Video
TV Aspect
:
:
:
Wide
Auto
On
Still Mode
Screen Messages
Black Level
TV System
Video Output
:
:
:
On
NTSC
S-Video
Note • Be sure to select the correct Digital Output or
no audio will be heard.
• When Multi Channel Output select Digital.
Dolby & MPEG-2 Digital Out works.
DTS
TV ASPECT
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
ENG-26
ENG-27
Setting Up the Display Options
Setting Up the Parental Control
Setting Up the Parental Control
Video Output
Select Video Output.
The Parental Control function works in conjunction
with DVDs that have been assigned a rating - which
helps you control the types of DVDs that your family
watches. There are up to 8 rating levels on a disc.
5. Select Rating Level using UP/DOWN buttons,
and press ENTER or RIGHT button.
CREATE PASSWORD
1. S-Video : Select when you want to use Video and
S-Video Out.
Re-enter Password
-
-
-
-
2. Component (I-SCAN) : Select when you want to use
Video and Component (Interlace) Out
1. With the unit in Stop mode, press the MENU button.
3. Component (P-SCAN) : Select when you want to use
Component (Progressive) Out.
RETURN
0 ~ 9
2. Select Setup using UP/DOWN buttons, then
RIGHT or ENTER button.
* If there is no Yes/No selection for 10 seconds at
Display in the sub Menu, Video system returns to the
previous menu.
3. Select Parental Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
6. Select Rating Level you want using UP/DOWN
buttons. For example, if you select up to Level 6,
discs that contain Level 7, 8 will not play.
- To cancel the Rating Level, select No using RIGHT or
ENTER in Use Password.
DISPLAY SETUP
TV Aspect
:
:
:
:
:
Wide
Auto
On
Still Mode
Screen Messages
Black Level
TV System
On
NTSC
Video Output
:
S-Video
e.g) Setting up in LEVEL6.
RATING LEVEL
Setting Up the Rating Level
Level 8 Adult
Level 7
DISPLAY SETUP
4. Use RIGHT or ENTER to select Yes if you want
to use a password. The Enter Password screen
appears.
Level 6
Level 5
Level 4
Level 3
Level 2
Level 1 Kids Safe
1. With the unit in Stop mode, press the MENU button.
S-Video
2. Select Setup using UP/DOWN buttons, then
RIGHT or ENTER button.
Component (I-SCAN)
Component (P-SCAN)
The player is locked (
).
PARENTAL SETUP
Use Password
:
No
About the Change Password;
- Highlight Change Password using UP/DOWN buttons.
- Press ENTER button.
ENTER
RETURN
MENU
The Change Password screen appears.
- Enter your new password. Enter the new password again.
Important Note
• Consult your TV User’s Manual to find out if your
TV supports Progressive Scan. If Progressive
Scan is supported, follow the TV User’s Manual’s
instructions regarding Progressive Scan settings in
the TV’s menu system.
5. Enter your password. The Re-enter Password
screen appears to confirm the password.
Enter your password again.
3. Select Parental Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button.
Note
The player is locked (
).
• How to make the SETUP menu disappear or
return to menu screen during set up;
Press RETURN or LEFT button.
• If the screen is blocked by setting the wrong Video
Output, See page 30.
4. Enter your password.
The Parental Setup screen appears.
CREATE PASSWORD
• If you have forgotten your password, see Forgot
Password in the Troubleshooting Guide.
Enter Password
PASSWORD CHECK
-
-
-
-
Enter Password
RETURN
0 ~ 9
-
-
-
-
RETURN
0 ~ 9
ENG-28
ENG-29
Troubleshooting
Specifications
Before requesting service (troubleshooting), please check the following.
Power Requirements
AC 110~240 V, 50/60 Hz
Power Consumption
Weight
12 W
Action
Problem
Page
1.8 Kg
General
•
•
•
Check the batteries in the remote. They may need replacing.
Operate the remote control at a distance of no more than 20 feet.
Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try to operate the remote again.
Dimensions
430mm (W) X 207mm (D) X 46mm (H)
+5°C to +35°C
No operations can be
performed with remote.
Operating Temperature Range
Operating Humidity Range
P3
10 % to 75 %
Reading Speed : 3.49 ~ 4.06 m/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
DVD
•
•
Ensure that the disc is installed with the label side facing up.
Check the region number of the DVD.
Disc does not play.
P5
(DIGITAL VERSATILE DISC)
5.1 channel sound is not
being reproduced.
•
5.1 channel sound is reproduced only when the following condi-
tions are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
Check whether the disc being played has the “Dolby 5.1 ch” mark
on the outside.
CD : 12Cm
(COMPACT DISC)
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
Disc
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 20 min.
CD : 8Cm
(COMPACT DISC)
P9
•
•
•
Check if your audio system is connected and working properly.
In a SETUP Menu, is the Audio Output set to Bitstream?
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min. (Video + Audio)
P26
VCD : 12Cm
The
screen.
icon appears on
•
The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
1 channel : 1.0 Vp-p (75 Ω load)
Composite Video
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that
is out of range.
P11
Video
Component Video
Output
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.3 Vp-p (75 Ω load)
Disc Menu doesn’t appear.
•
•
Check if the disc has a Menu.
S-Video
2 channel
Play mode differs from the
Setup Menu selection.
Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
L(1/L), R(2/R)
P23~29
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
*Frequency Response
The screen ratio cannot
be changed.
Audio
•
•
The Screen Ratio is fixed on your DVDs.
P27
P26
Output
*S/N Ratio
110 dB
100 dB
0.004 %
Make sure you have selected the correct Digital Output in the
Audio Options Menu.
No audio.
*Dynamic Range
*Total Harmonic Distortion
The screen is blocked
•
Press power on from a cold start with no disc in the unit. Press the
STOP (
) and PLAY (
) buttons simultaneously on the front
P28~29
P28~29
*: Nominal specification
panel for three seconds. The SELECT MENU LANGUAGE display
will appear. Select the number button of the desired language.
Forgot password
•
Press power on from a cold start with no disc in the unit. Press the
STOP (
panel for three seconds. The SELECT MENU LANGUAGE display
will appear. Select the number button of the desired language.
Press the MENU button, and then press DOWN button to select
the Parental Setup. The Parental Setup is now unlocked as
indicated on the display. You can change your password.
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
) and PLAY (
) buttons simultaneously on the front
• Weight and dimensions are approximate.
•
•
Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
If the problem still cannot be solved, please contact your nearest
authorized service center.
If you experience other
problems.
ENG-30
ENG-31
|