CONNECTING A VCR OR DVD TO THE DTV
VIDEO1 (ANALOG) JACKS
DTV AV Input Jacks
ENGLISH
AS
Connect
Yellow, White, and Red AV jacks.
a
Composite cable to the VIDEO1
1
2
LCD Owner’s Manual
OPTIONAL
Model Nos.
Part No.:
1JC6P1P0291 – –
Connect DVD to the TV S-Video In Jack, if avail-
able on your external equipment.
2
S-Video
Jack
DP15657
DP19657
Note: S-Video jack connection overrides Video jack
connection (VIDEO1).
Please call us at
(Optional)
1.800.877.5032 if you need
assistance with your new HDTV.
We can Help!
Press INPUT to select Video1 to view the VCR or
DVD program.
1
3
Composite
AV
IMPORTANT FACTS:
Remote Control
for more information about these models.
Jack
Don’t be fooled by the phrase
“Available in High-Definition.”
Composite jacks offer only 480i
(SDTV) resolution.
To view available High-Definition
(HD) programs, you must connect
your HD equipment to the
Component jacks.
FIRST-THINGS-FIRST (REQUIRED INITIAL SETUP)
3
Install batteries in remote control (2AA, not included)
1
PRECAUTIONS
To ensure safe operation, please observe the following
precautions:
CONNECTING A MULTICHAN-
NEL RECEIVER TO THE DTV
CONNECTING A STEREO
AMPLIFIER TO THE DTV
Replace both batteries at the same time. Do not use a new
battery with a used battery.
Risk of explosion, if battery is replaced by an incorrect type.
Do not expose the Remote Control Unit to moisture or heat.
DIGITAL AUDIO OUT JACK
AUDIO OUT (ANALOG) JACKS
Connect a Multichannel Receiver to the TV Digital
Audio Output as shown.
Connect
Audio Out jacks as shown.
a
Stereo Amplifier to the TV
Connect Signal to the TV’s Integrated Analog / Digital
75 ohm Antenna Input terminal
1
1
2
®
Note: Dolby Digital 5.1 audio is available at the Digital
Audio Output only when received as part of a
Digital Antenna signal.
Note: Do not connect external speakers
RF ANTENNA
directly to the DTV.
The Tuner in this DTV can receive:
1. Digital and /or Analog Off-Air
Signals from an RF antenna.
OR
Multichannel Receiver
CABLE
OR
Back View of TV
2. Analog or ClearQAM cable chan-
nels.
1
OR
Note: You must search for ClearQAM
channels using the “Digital
1
Cable Search” menu option.
Back View of TV
OR
Analog/Digital
Antenna In
Coaxial Cable
3. The output from a VCR or cable
box.
CABLE BOX or SATELLITE BOX
Stereo
Amplifier
Digital signals from a Set-Top Box
(STB) should be received through
the Component In jacks.
Plug in AC power cord (120V AC, 60 Hz.)
3
4
5
This DTV can receive ANY unscram-
bled RF signal being broadcast.
Press the POWER key.
(Follow on-screen instructions)
Initial on-screen
ALL Channel Search
Perform “All Channel Search.” The All Channel
Search will search for off-air digital and analog
channels, and analog cable channels. The DTV will
receive cable or off-air channels, but not at the
same time. If after two searches the DTV still fails
to detect any channels, the DTV will tune to
Video1.
If you experience
problems, please call
REMOTE CONTROL OPERATION
1-800-877-5032,
Point
towards TV
We Can Help!
Note: If EXIT is pressed,
the DTV will skip Channel
Search and tune to Video1
without storing any chan-
nels in the Channel Map
database.
ALL Channel Search [Analog & Digital]
Enter Key—Press to select an option from the
menu system, when required.
Exit Key—Press to exit from the menu system.
Œ
•
PIX Shape Key—Use to change the video display
format. Available options depend on signal
received and the broadcast’s aspect ratio. Note:
Cannot display picture on a full screen. Check
Aspect Ratio of broadcast. Then press PIX Shape
key to change setting.
‘
’
«
Ž
Trademarks Information:
Specifications
Reset Key—Press this key twice to restore factory
settings. The TV will automatically start Channel
Search and clear all customized settings. Note:
Channel scan memory database list of digital
and analog channels will be replaced. If desired,
personal settings can be made again using the
menu options.
Power Requirement: Source: AC 120V, 60Hz
Power Consumption: DP15657: 40 watts
DP19657: 50 watts
Manufactured under license from Dolby Laboratories.
“Dolby” is a trademark of Dolby Laboratories.
11
12
13
CONNECTING A DVD OR
GAME TO THE DTV
DVD Player or similar digital
DTV
device, such as a Satellite Receiver
Audio Key—Press to select the desired audio
mode (if available).
“
”
14
‘
’
“
”
Y- Pb- Pr
VIDEO 2 / 3 (COMPONENT VIDEO IN
JACKS)
Caption Key—Captioning is text information
transmitted along with the picture and sound so
it can be displayed on the TV screen.
1 JCaocmksponent
Press CAPTION to select mode options: Digital
Connect a Component cable to the VIDEO2 / 3
Green, Blue, and Red video jacks.
CC1
~
CC6, or Analog CC1
~
CC4, OFF, or
1
2
3
QuikCap. (QuikCap switches captions on and off
with the Mute function.) Digital Captions can be
changed using the menu settings.
Connect an Audio Cable to the VIDEO2 / 3
White and Red audio jacks.
2
Input Key—Press to select the program source
to watch: TV, Video 1, Video 2, or Video 3.
Volume Keys—Press VOL – + to adjust.
Œ
Audio L/R Jack
Press INPUT to select Video2 or Video3 to
view the program.
Mute Key—Press once to mute the sound.
•
Ž
Game console
11 Recall Key—Press to switch between the last
Note: VIDEO2 and VIDEO3 jacks have identical
functions. Compatible video devices can be
connected to either or both jacks.
Number Keys—Press two keys to select a chan-
nel. Example: Press 0 then 6 to select channel
6. (See #13.)
two channels selected.
12 Sleep Key—Press this key then the “0” key to set
the Sleep Off Timer. Time can be set in 30-minute
increments up to 3 hours. Note:The Sleep Timer
cancels when the TV is turned off or if a power failure
occurs.
Y- Pb- Pr
Component
Jacks
Channel Scanning (CH L M ) Keys—Press to
scan through the channels in memory.
Menu Navigational Keys:
1
OPERATING TIP:
Menu—Press to display on-screen menu.
Cursor L (up) M (down) keys—Press these
keys to move the cursor up and down within
the menu.
1– – Key—For Analog Cable channels above 100,
press this key, then press the other two numbers.
13
Remote Control
You DO NOT need to tune the TV
to Channel 3 or 4 to view DVD
program.
Info Key—Press to display the Digital and Analog
Full Banner information. The banner contains the
following: program title, station ID, program rat-
ing, signal strength, channel number, tuner ID,
and audio information.
14
2
Cursor < (left) > (right) keys—Press these keys
to move the cursor left and right within the
menu.
Audio L/R
Jack
3
|