INFORMATION
Français / French
Cher client,
Nous vous remercions d’avoir acquis ce produit Schneider. Pour de plus amples
informations sur la garantie Schneider applicable, veuillez consulter le site Web Philips
www.philips.com/guarantee. La garantie Schneider ne remet pas en cause vos
droits prévus par la loi. Si vous n’avez pas accès à Internet, veuillez prendre contact
avec le Service Consommateurs Philips, dont les coordonnées sont données ci-après.
English
Dear Customer,
Thank you for purchasing this Schneider product. For the Schneider warranty
applicable to this product, we refer you to the Philips website
www.philips.com/guarantee. In the event you do not have an Internet connection,
please contact your Philips Consumer Care Centre. Contact details are given
hereafter.
Deutsch /German
Sehr geehrter Kunde,
wir beglückwünschen Sie zu Ihrer Entscheidung für dieses Produkt von Schneider.
Nähere Informationen zu der für dieses Produkt geltenden Schneider Garantie finden
Garantie beeinträchtigt in keiner Weise Ihre gesetzlichen Rechte. Sofern Sie keinen
Zugang zum Internet haben, wenden Sie sich bitte an Ihr Philips Info-Center (sehe
nächste Seite).
FRANCE
Service Consommateurs Philips
BP 0101
75622 Paris Cédex 13
Téléphone: 08 25 88 97 89
Help?
If this instruction manual does not give an answer or if ‘Tips’ do not solve your TV problem, you can call your
Customer or Service Centre. See the supplied guarantee leaflet.
Please, have the Model and Product number which you can find at the back of your television set or on the
packaging, ready, before calling the helpline.
Model: 107FB4/10
Product No:
Care of the screen
Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the
screen permanently. Do not rub with dust clothes with chemical treatment. Do not touch the surface with bare
hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the
screen.When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like
chamois soaks. Do not use acetone, toluene and alcohol because they cause chemical damage.
Do not use liquid cleaners or aerosol cleaners.Wipe off saliva or water drops as soon as possible.Their long
time contact with the screen causes deformations and colour fading.
Warning concerning stationary images on theTV screen
A characteristic of Plasma Display Panels is that displaying the same image for a long time can cause a
permanent after-image to remain on the screen.This is called phosphor burn in.
Normal use of the TV should involve the showing of pictures that contain constantly moving and changing
images that fill the screen.
Preparation
& Table stand
‘ Insert the mains cord supplied into the mains
at the bottom of the TV and in the wall socket
having a mains voltage of 198-264V.
According to the type of TV you’ve purchased a
stand may be supplied. How to mount the
supplied stand, see the supplied separate leaflet.
The weight of the TV (excl. packaging) is about
42 kg.
To prevent damaging the power (AC) cord
which could cause a fire or electric shock, do
not place the TV on the cord.
Note: Other (not supplied) stands are optional
accessories. Consult your dealer.
( Remote control: Insert the 2 batteries
supplied (Type R6-1,5V).
The batteries supplied do
not contain the heavy
metals mercury and
é Make sure that air can circulate freely through
the ventilation slots.
cadmium. Please check on
how to dispose of
exhausted batteries
according to local
regulations.
§ Switch theTV on : Press the power switch B
at the right side of the TV.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles, should
be placed on or in the vicinity.Avoid heat,
direct sunlight and exposure to rain or water.
The equipment shall not be exposed to
dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on it.
An indicator on the front of the TV lights up
and the screen comes on. If the TV is in
standby mode (red indicator), press the -P+
keys or the B key on the remote control.
“ Insert the aerial plug firmly into the aerial
socket x at the bottom of the TV.
1
To use the menus
& Press the MENU key on the remote control to
summon the main menu.At any moment you
can exit the menu by pressing the MENU key
again.
“ Use the cursor in the right direction to select
the menu item.
‘ Use the cursor up/down again to select the
control you want to select or to adjust.
é Use the cursor up/down to select Picture,
Note: Items temporary not available or not relevant are
displayed in a light grey colour and cannot be selected.
Sound, Features, Install or Mode.
TV menu
Picture menu:
• Brightness: this changes picture brilliance.
• Colour: this changes the intensity of the
colour.
TV Menu
Picture
• Contrast: this changes the difference between
the light and dark tones.
• Sharpness: this changes the picture definition.
• ColourTemp: this changes the colour
rendering: Cool (more blue), Normal
(balanced) or Warm (more red).
• Store: to store the picture adjustments and
settings (as well as the settings for Contrast+
and NR in the Features menu).
p
π
Picture π
Sound
Brightness π
Colour
Features
Install
Mode
Contrast
Sharpness
Colour Temp
Store
Sound menu:
•Equalizer: to adjust the sound tone (from
bass 120 Hz to treble 10 kHz).
• Balance: this balances the sound on the left
and right speakers.
• DeltaVolume: this is used to compensate any
volume discrepancies between the different
programmes or externals.
This setting is available for programmes 0 to
40 and the EXT connections.
TV Menu
Sound
Picture
Sound π
Features
Install
Equalizerπ
Balance
DeltaVolume
AVL
VirtualDolby
Store
120 Hz
500 Hz
1500 Hz
....
Mode
• AVL (AutomaticVolume Leveller): this is used
to limit increases in sound, especially on
programme change or advertising slots.
Virtual Dolby
•
: simulates the surround sound
experience from 2 speakers using Dolby Pro
Logic* providing the listener with the
sensation of being surrounded by additional
speakers.
•Store: this is used to store the sound settings.
TV Menu
Features
Features menu:
•Timer: see p. 8.
Picture
Sound
Features π
Install
Timerπ Sleep
Contrast+ Time
NR Start Time
• Contrast+: automatic adjustment of the
picture contrast which permanently sets the
darkest part of the picture to black.
• NR: attenuates picture noise (snow) in difficult
reception conditions.
Caution: to store the Contrast+ and NR settings,
use the Store choice in the Picture menu.
Stop Time
Mode
Program No.
Activate
see p. 7
Install menu:
2
Use of the remote control RC4333
Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it.
Remark: in VGA mode only some keys are valid.
VCR DVD TV SAT AMP
B Standby
See ‘Audio- andVideo equipment
Press to switch the TV on or off.
keys’, p. 10.
v • Select your peripherals
b Teletext On/Mix/Off, see p. 9.
See p. 6.
B
Colour keys, see Teletext.
• Reveal
Press the v key to reveal/
conceal hidden information on a
page such as solutions to riddles
and puzzles.
OK Press this key to display the
VCR DVD TV SAT AMP
programme list.
SELECT
†
v
®
MENU Main menu on/off
Ò
‡
π
TV
PC
¬ Interrupt the sound or restore it.
†®Ò‡πº
Audio andVideo equipment keys.
º
b
P
Programme selection
To move up or down a
®
programme.The number and the
sound modes are displayed for a
few seconds.
For some TV programmes the title of
the programme appears at the
bottom of the screen.
TV / PC
Press one of these keys to
switch the television between TV
or PC mode.
®
®
OK
®
SURR
MENU
SURR Surround sound
0/9 Digit keys
To activate/deactivate the
surround sound effect. In stereo,
this gives the impression that the
speakers are further apart. For
models equipped withVirtual
Dolby Surround, you can obtain
Dolby Surround Pro Logic*
sound quality. In mono, a stereo
spatial effect is simulated.
Note:You can make the same
selection in the Sound menu,Virtual
Dolby.
To select a TV channel.
For a two digit programme
number, enter the second digit
before the dash disappears.To
switch immediately to a selected
one digit TV channel, keep the
digit key pressed a bit longer.
+
V
-
+
P
¬
-
1
4
2
5
8
0
3
6
0 PreviousTV channel
Press to display the previously
selected TV channel.
7
9
V To adjust the volume.
:g Teletext keys. See p. 9.
i
0
i On Screen information
X Sound mode
:
To display/remove the
programme number, the time, the
sound mode and the time
remaining on the timer.
Hold down for 5 seconds to
permanently display the
programme number on the
screen.
g
h
q
X
To switch from Stereo or
Nicam Stereo to Mono, or to
choose between Dual Y or
Dual Z in case of bilingual
transmission.
When the sound mode is Mono,
the indication is displayed in red.
SMART
SMART
M
a
h Active control on/off/on
with sensor
Optimizes the quality of the
picture according to the quality
or reception.
* Dolby’‘Pro Logic’ and the double-D G symbol are trademarks of
Dolby Laboratories Licensing Corporation. Manufactured under license
from Dolby Laboratories Licensing Corporation.
3
i
g
0
q
0
q 16:9 formats
The pictures you receive may be transmitted in 16:9 format (wide screen)
or 4:3 format (conventional screen).
4:3 picture sometimes have a black band at the and the bottom of the
screen (letterbox format).
This key allows you to optimise the picture display on screen.
:
h
X
SMART
SMART
M
a
Automatic switching
This TV set is equipped with automatic switching which will select the
correct screen format, provided the specific signals are transmitted with
the programmes.
This automatic format can also be modified manually;
Using the different formats
Use the cursor left/right to select the different modes: 4:3, Zoom 14:9,
Zoom 16:9, Subtitle zoom, Super wide and Wide screen.
4:3
The picture is reproduced in 4:3 format and a black band is displayed
on either side of the picture.
Zoom 14:9
The picture is enlarged to 14:9 format, a thin black band remains on
both sides of the picture.
Zoom 16:9
The picture is enlarged to 16:9 format.This mode is recommended
when displaying pictures which have black bands at the top and
bottom (letterbox format).
Subtitle Zoom
This mode is used to display 4:3 pictures using the full surface of the
screen leaving the subtitles visible.
Super Wide
This mode is used to display 4:3 pictures using the full surface of the
screen by enlarging the sides of the picture.
Widescreen
This mode restores the correct proportions of pictures transmitted
in 16:9 using the full screen display.
Fullscreen
This mode displays images in full screen.
Ma Smart keys
To select predefined picture and sound settings.
Personal refers to the personal preference settings selected in the sound
and picture menu.
Note:This TV has been set at the factory to look best in bright store
environments which use fluorescent lighting.As your home will likely not be
as well lit as a store, we recommend you that you cycle through the various
Smart picture modes to find the one that best suits your own viewing
conditions. Most consumers will find that Natural is the correct choice.
4
Camcorder, video games, headphone
Camcorder,Video games
The AV and S-VIDEO connections are located at the right
side of the TV or, for large screen sizes at the bottom;
Make the connections as shown opposite.
With the v key, select AV.
VIDEO
VIDEO IN
AUDIO
S-VIDEO
S-VIDEO
For a monophonic device, connect the audio signal to the AUDIO
L input.The sound automatically comes out of the left and right
speakers of the set.
Rear connections
Recorder (VCR-DVD+RW)
Note: Do not place your recorder too close to the screen as some recorders may be susceptible to signals from the
display. Keep a minimum distance of 0,5 m from the screen.
Connect the aerial cables 1, 2 and, to obtain the
optimum picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only
CABLE
possible connection is via the aerial cable.
You will therefore need to tune in your recorder’s test
signal and assign it programme number 0 or store the test
EXT 1
signal under a programme number between 90 and 99, see
Manual store, p. 7.
See the handbook of your recorder.
3
1
2
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the special
euroconnector of your recorder. See also the recorder
RECORDER
DECODER
handbook. You can also connect your decoder directly to
EXT1 or 2 with a eurocable.
(satellite receiver, decoder, DVD, games, etc.)
Other equipment
Connect the aerial cables 1, 2 and 3 as shown
CABLE
(only if your peripheral has TV aerial in-/output).
Connect your equipment with a eurocable 4 or 5 to
one of the euroconnectors EXT1 or 2 to obtain a
better picture quality.
EXT2
EXT1
Connect the equipment which produces the RGB signals
(digital decoder, games, etc.) to EXT1, and the
4
5
1
3
2
equipment which produces the S-VHS signals (S-VHS
and Hi-8 video recorders, certain DVD drives) to EXT2
and all other equipment to either EXT1 or EXT2.
RECORDER
5
Amplifier
To connect to a hi-fi system, use an audio connection
cable and connect the L and R AUDIO outputs on the
TV set on the AUDIO IN L and R input on your hi-fi
amplifier.
AUDIO
OUT
L
R
Connect your computer
& Connect one end of aVGA cable 1 to the video card
of the computer and the other end to the VGA IN
connector at the bottom of the TV.
Fix the connectors firmly with the screws on the plug.
AUDIO
L
é In case of a Multimedia computer, connect the audio
cable 2 to the audio outputs of your Multimedia
computer and to the AUDIO R (right) and L (left)
inputs.
VGA
IN
R
The VGA connector allows the following TV and
1
monitor display modes:
2
VGA
SVGA
XGA
640 x 480
800 x 600
1024 x 768
1280 x 768
60 Hz
60 Hz
60 Hz
60 Hz
WXGA
Note:
Use the WXGA1280x768@60Hz video mode to obtain the best
image quality for your PDP monitor.
To select connected equipment
Press the v key on the remote control repeatedly to select EXT1, EXT2 (S-VHS signals from the EXT2
connector) or AV according to where you connected your equipment.
Remark : Most equipment (decoder, recorder) carries out the switching itself, when it is switched on.
6
How to search for and store TV channels
Via theTV menu:
& Press the MENU key on the remote control.
é Use the cursor up/down to select Install.
“ Press the cursor right to enter the Install menu.
‘ Use the cursor left/right to select your language.
( Press the cursor down to select Country.
§ Use the cursor left/right to select your country.
Note: Select “.....” when none of the countries applies.
Auto Store
Install
Install
TV Menu
Language System
Country Search
Auto Store Program No
Manual Store π Fine tune
Language ....
Country 10 p
Auto Store 11
Manual Store 12 π
Sort π 13
Picture
Sound
Features
Install π
Mode
Programmeπ ..........
TV π
freq
o
p
π
œ
Sort
Store
Auto store
& Select Auto Store in the Install menu.
Manual store
Searching for and storing TV channels is done
channel by channel.You must go through every step
of the Manual Installation menu.
The autostore option label Start appears.
é Press the cursor right.
& Select Manual Store in the Install menu and
“ The progress of autoprogramming is displayed.
press the cursor right to enter.
If a cable system or a TV channel which broadcasts
ACI (Automatic Channel Installation) is detected, a
programme list appears.Without ACI broadcast,
the channels are numbered according your
language and country selection.You can use the
Sort menu to renumber them.
é Select theTV system:
Select the country or part of the world from
where you want to receive the TV channel. If
you are connected to a cable system, select
your country or part of the world where you
are now located.
Note: for automatic detection select Europe (except
for France).
It is possible that the cable company or the TV channel
displays a broadcast selection menu. Layout and items
are defined by the cable company or the TV channel.
“ Search for aTV channel:
Press the cursor down to select Search and
press the cursor right to start searching.
Sorting TV channels
& Select Sort in the Install menu and press the
Direct selection of aTV channel:
If you know the frequency, enter it directly with the
digit keys 0 to 9.Ask for a list from your cable
company or dealer, alternatively consult the Table of
frequencies on the inside backcover of this
handbook.
cursor right
é Select the TV channel you want to move using
the cursor up/down and press cursor right.
“ Select the new number and validate with the
cursor left.
‘ Press the cursor down and enter the
‘ Repeat steps é and “ for each TV channel
programme number with the digit keys.
you wish to renumber.
( Fine tune:
( To exit the menus, press the MENU key
In case of poor reception, you can improve the
reception by adjusting the frequency with the
cursor left/right.
repeatedly.
§ To store your TV channel, select Store and
press the cursor right. Repeat steps “ to (
to store another TV channel.
è To exit from the menu press the MENU key on
the remote control.
7
Features menu
§ StopTime: enter the standby time.
Timer
è Program No.: enter the number of the
This menu lets you use the TV set as an alarm.
programme for the wake-up alarm.
& Press the MENU key.
! Activate: the settings include:
• Once for a single alarm;
• Daily for each day,
é With the cursor, select Features, then Timer.
“ Sleep: to select an automatic standby period.
• Off to cancel.
‘ Time: enter the current time.
Note: the time is updated automatically each time
the TV set is switched on via the teletext
information on programme 1. If the programme
does not have teletext, the update will not take
place.
ç Press the B key on the remote control to put
the TV set in standby. It will automatically come
on at the time programmed. If you leave the TV
set on, it will just change programmes at the
time entered (and will go to standby mode at
the Stop Time).
( StartTime: enter the start time.
Using in PC monitor mode
Your TV can be used as a computer monitor.
You must first of all connect the computer and adjust the resolution (see p. 6).
Choosing PC mode
Press the PC key on the remote control to switch the TV to PC mode. Press the TV key to return to
TV mode. If there is no PC signal for more than five seconds, the TV automatically goes into standby
mode.
Using the PC menus
Press the MENU key to access the specific settings of the
PC monitor mode. Use the cursor keys to adjust them (the
TV Menu
settings are automatically saved).
Picture
Sound
TV
PC
Picture
Features
Install
Mode π
•
•
•
Brightness/Contrast: to adjust the brightness and
contrast.
Horizontal/Vertical Position: to adjust the horizontal
and vertical placing of the image.
ColourTemperature: to adjust the colours (cool,
normal or warm).
PC mode
Picture π Brightness
Audio selection Contrast
Features Horizontal Pos
Reset to Factory Vertical Pos
Mode Colour Temp
Audio selection
To choose the sound reproduced on the TV
(PC or TV).
Features
•
•
•
Phase/Clock: eliminates the horizontal (Phase) and
vertical (Clock) interfering lines.
Format: to choose between large screen (Full screen)
or the original (Native) format of the PC screens.
Auto adjust: position is set automatically.
Features
Phase
Clock
Format
Reset to Factory
To return to the factory settings
Auto adjust
Mode
To come back to TV mode.
8
Teletext
Teletext is an information system broadcast by certain channels which can be consulted like a
newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar
with the transmission language (cable networks, satellite channels, etc.).
Press:
You will obtain:
B
b
Teletext
on/off
This is used to call teletext, change to transparent mode
and then exit.The summary appears with a list of items
that can be accessed. Each item has a corresponding 3
digit page number.
VCR DVD TV SAT AMP
SELECT
†
v
®
If the channel selected does not broadcast teletext, the indication
100 will be displayed and the screen will remain blank (in this
case, exit teletext and select another channel).
Ò
‡
π
TV
PC
º
b
0/9
-P+
Selecting
a page
Enter the number of the page required using the 0 to 9
or -P+ keys. Example: page 120, enter 1 2 0.
The number is displayed top left, the counter turns and
then the page is displayed. Repeat this operation to view
another page.
®
®
®
OK
®
If the counter continues to search, this means that the page is not
transmitted. Select another number.
SURR
MENU
OOOO
Direct
access to
the items
Coloured areas are displayed at the bottom of the screen.
The 4 coloured keys are used to access the items or
corresponding pages.
+
V
-
+
P
¬
-
The coloured areas flash when the item or the page is not yet
available.
1
4
2
5
8
0
3
6
i
Contents
This returns you to the contents page (usually page 100).
cursor
up/down
Enlarge
a page
This allows you to display the top or bottom part of the
page and then return to normal size.
7
9
i
0
g
Stop subpage
acquisition
Certain pages contain subpages which are automatically
displayed successively.This key is used to stop or resume
subpage acquisition.The indication _ appears top left.
:
g
X
h
q
SMART
SMART
M
a
:
Double page
teletext
To activate or deactivate the double page teletext display
mode.The active page is displayed on the left and the
following page is displayed on the right. Press g if you
want to hold a page (i.e. the contents page).The active page
is then displayed on the right.To return to normal mode,
press X.
X
MENU
OOOO
i
Favourite
pages
Instead of the standard coloured areas displayed at the
bottom of the screen, you can store 4 favourite pages on
the first 40 channels which can then be accessed using the
coloured keys (red, green, yellow, blue). Once set, these
favourite pages will become the default every time teletext
is selected.
& Press the MENU key to change the favourite pages
mode.
é Display the teletext page that you want to store.
“ Press the coloured key of your choice for 5 seconds.
The page is stored.
‘ Repeat steps é to “ for the other coloured keys.
( Now when you consult teletext, your favourite pages
will appear in colour at the bottom of the screen; to
temporally retrieve the standard items, press menu.
To clear everything and return to the standard items as the
default, press i for 5 seconds.
9
Audio- and video equipment keys
This system remote control operates the following equipment:TV,VCR, DVD, SAT
(RC6),AMP (+TUNER).
B
Press the Select key to operate any of the equipment indicated in the display.
Another device can be selected by pressing Select repeatedly within 2 seconds.
The led will blink slowly to indicate the device.
Press one of the keys on the remote control to operate the peripheral equipment.
To return to TV mode press Select while the led is blinking.
VCR DVD TV SAT AMP
SELECT
†
v
®
Ò
‡
π
TV
PC
When no action is taken within 60 seconds, the remote goes back to TV mode.
º
b
®
Note:When the Select key is pressed and held for more than 2 seconds, the RC5/RC6
system select command is transmitted.
®
®
OK
®
MENU to switch the menu on or off
B
º
to switch to standby
SURR
MENU
- P + for chapter, channel, track
for pause (VCR, DVD, CD)
RDS news/TA (AMP);
to shuffle play (CD/R)
selection
+
V
-
+
P
¬
0 to 9 digit entry
-
®
for record
0
tape index (VCR),
select a DVD title/chapter,
select a frequency (AMP)
Ò
for rewind (VCR, CD);
search down (DVD, AMP)
1
4
2
5
8
0
3
6
‡
for stop
for play
cursor up/down
to select the next or the
previous disc (CD)
cursor left/right
7
9
π
i
0
†
for fast forward (VCR, CD);
search up (DVD, AMP)
:
g
h
q
X
SMART
SMART
to select the previous or
following track (CD)
search up/down (AMP)
b
i
RDS display (AMP);
to select your choice of subtitle
language (DVD);
a
M
display information
10
Tips
Poor Picture
• Have you selected the correct TV system in the manual installation menu?
• Is your TV or house aerial located too close to loudspeakers, non-earthed audio
equipment or neon lights, etc.?
• Mountains or high buildings can cause double pictures or ghost images.
Sometimes you can improve the picture quality by changing the direction of the
aerial.
• Is the picture or teletext unrecognisable? Check if you have entered the correct
frequency. See Store TV channels, Manual store,p. 7.
No Picture
• Are the cables connected properly ? (The aerial to your recorder,
theVGA cables to the display, the power cables.)
• Is your PC switched on ?
• Do you see a black screen and the indicator in front of the TV lights up green,
this means that the display mode is not supported. Switch yourVGA-source to a
correct mode.
• In case of weak or bad signal, consult your dealer.
Digital distortion
No sound
The low quality of some digital picture material may be the cause of digital image
distortion. In this case select the Soft setting using the Smart picture key a on
the remote control.
• No sound on any channel? Check the volume isn’t at minimum.
• Is the sound interrupted with the mute key ¬?
No solution found Switch your TV off and then on again once. Never attempt to repair a defective
for your picture or TV yourself. Check with your dealer or call a TV technician.
sound problem ?
Menu
Have you selected the wrong menu? Press the MENU key again to exit from the
menu.
Remote control
Standby
• Check if the remote control is in the correct mode.
• If your TV no longer responds to the remote control, the batteries may be dead.
Your TV consumes energy in the standby mode. Energy consumption contributes
to air and water pollution. Power consumption: >3 W.
Miscellaneous
. Ambient temperature: + 5~ + 40°C
. Mains: 50/60 Hz AutoVoltage ranging from 198V to 264V
. Power consumption: around 160 W
. Standby consumption: >3 W
. Weight (excl. packaging): 42 kg
. Dimensions (wxhxd): 1077x660x90
11
|