1x2 Compact VGA Splitter
Installation Guide
Introduction
The 1x2 Compact VGA Splitter allows you to
distribute content from a single source to two
VGA monitors simultaneously.
Features and Benefits
•
Supports VGA, SVGA, XGA, UXGA
and Multi-Sync monitors
•
•
•
Supports up to 1920 x 1440 resolution
Video bandwidth: 300MHz
Distance: up to 50M (164ft)
Layout
Monitor ports
Figure 1: Layout
04-0668C
1
TechnicalSupportandWarranty
QUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site at
with new drivers and solutions. Answers to your questions could be just a few clicks
away. You can also submit questions online and a technical support analyst will
promptly respond.
SIIG offers a 2-year manufacturer warranty with this product. This warranty covers
the original purchaser and guarantees the product to be free of any defects in
materials or workmanship for two (2) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state. Please see our web site for more warranty
details.
If you encounter any problems with this product, please follow the procedures
below.
A) If it is within the store's return policy period, please return the product to the
store where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
A
PRODUCT
REPLACEMENT to submit a request to SIIG RMA or fax a request to 510-657-
5962. Your RMA request will be processed, if the product is determined to be
defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
•
Properly pack the product for shipping. All accessories that came with the
original package must be included.
•
Clearly write your RMA number on the top of the returned package. SIIG
will refuse to accept any shipping package, and will not be responsible for
a product returned without an RMA number posted on the outside of the
shipping carton.
•
•
You are responsible for the cost of shipping to SIIG. Ship the product to the
followingaddress:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
3
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions(includingSerialATAandUltraATAControllers,FireWire,USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebook systems and external peripherals. SIIG continues to grow by
adding A/V and Digital Signage connectivity solutions to our extensive
portfolio.
SIIG products offer comprehensive user manuals, many user-friendly
features, and are backed by an extensive manufacturer warranty. High
qualitycontrolstandardsareevidentbytheoveralleaseofinstallationand
compatibility of our products, as well as one of the lowest defective return
rates in the industry. SIIG products can be found in computer retail stores,
mail order catalogs, through major distributors, system integrators, and
VARsintheAmericasandtheUK, andthroughe-commercesites.
PRODUCT NAME
1x2 Compact VGA Splitter
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
1x2 Compact VGA Splitter is a trademark of SIIG, Inc. SIIG and the SIIG logo are
registered trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of
MicrosoftCorporation. Allothernamesusedinthispublicationareforidentificationonly
and may be trademarks of their respective owners.
December, 2013
Copyright © 2013 by SIIG, Inc. All rights reserved.
|