SIIG Video Gaming Accessories 04 0698B User Manual

USB 3.0 Multi Card Reader  
Quick Installation Guide  
Introduction  
The USB 3.0 Multi Card Reader is the perfect  
choice for computer users looking for a flash  
memory card reader/writer that's easy to carry  
and supports multi-format flash memory cards.  
Key Features and Benefits  
Supports SuperSpeed USB 3.0 data transfer  
rate up to 5Gb/s  
Compliant with Universal Serial Bus 3.0  
Specification  
Supports SDXC and MSXC up to 2TB  
System Requirements  
Notebook or desktop PC with an available  
USB port (USB 3.0 recommended)  
Windows® 8 (32-/64-bit) / 7 (32-/64-bit) /  
Vista (32-/64-bit) / XP (32-/64-bit) / Server  
2003 & 2008 (32-/64-bit) / Server 2008 R2  
04-0698B  
1
 
LEDActivity  
Power LED (Blue)  
Activity LED (Red)  
Note: The activity LED will also lit up  
when a memory card is inserted. It flashes  
when accessed.  
Installation  
Important: The USB 3.0 Multi Card Reader only  
works at USB 3.0 speed when connected to a USB  
3.0 controller. Otherwise it will work as a USB  
2.0 or USB 1.1 card reader when connected to  
USB 2.0 or USB 1.1 controller respectively.  
In order for the USB 3.0 Multi Card Reader to  
work as a USB 3.0 card reader, the driver for your  
existing USB 3.0 host controller has to be properly  
installed. This card reader will automatically be  
detected and installed when connected to the  
USB 3.0 port.  
1.  
Connect one end of the USB cable to the  
card reader.  
2.  
Connect the other end to a USB port of the  
computer.  
3
 
InsertingMemoryCards  
Inserting memory card with top label facing  
down and the gold pins facing up:  
microSD / miniSD / SD / SDHC / MS  
Micro (M2) / xD / MMC  
Inserting memory card with the top label facing  
up and the gold pins facing down.  
Memory Stick Pro / Memory Stick Duo /  
Memory Stick Pro Duo / CF / MD  
AccessingMemoryCards  
WhentheUSB3.0MultiCardReader issuccessfully  
installed, five Removable Disk icons appear in  
Computer or My Computer. To access any one  
drive, double click the icon that corresponds to  
the memory card.  
Do4wnload from Www.Somanuals.com. All Manuals Search And Download.  
Windows 8 / 7 / Server 2008 R2  
Removable Disk won't appear in Computer  
until you insert a memory card into the card  
reader. However, if you want all five disk icons  
to appear follow the direction below.  
1.  
2.  
Click Start menu, then click Control Panel.  
Change the View by Category to Small  
icons. It is located on the upper right side  
of your screen. Skip this step if Small icons  
is already selected.  
3.  
4.  
5.  
Double click Folder Options.  
Click View tab.  
Uncheck Hide empty drives in the  
computer folder, then click OK.  
RemovingMemoryCards  
Memory cards can be removed at any time.  
However, to prevent data loss, data corruption  
ormemorycardfailure,DONOTremovememory  
cards while the Activity LED is flashing.  
5
 
UnpluggingtheCardReader  
Please follow the steps below to safely remove the  
USB 3.0 Multi Card Reader from the computer.  
Windows 8 / 7 / Vista / XP / Server 2003 &  
2008 / Server 2008 R2  
1.  
2.  
3.  
Click the Safely Remove Hardware icon  
located in the taskbar by the system clock.  
Click Safely Remove USB Mass Storage  
Device....  
When the Safe To Remove Hardware box  
pops up, the reader/writer can be removed.  
Do6wnload from Www.Somanuals.com. All Manuals Search And Download.  
TechnicalSupportandWarranty  
QUESTIONS? SIIGs Online Support has answers! Simply visit our web site at  
www.siig.com and click Support. Our online support database is updated daily with  
new drivers and solutions. Answers to your questions could be just a few clicks away.  
You can also submit questions online and a technical support analyst will promptly  
respond.  
SIIG offers a 5-year manufacturer warranty with this product. This warranty covers the  
original purchaser and guarantees the product to be free of any defects in materials or  
workmanship for five (5) years from the date of purchase of the product.  
SIIG will, at our discretion, repair or replace (with an identical product or product  
having similar features and functionality) the product if defective in materials or  
workmanship. This warranty gives you specific legal rights, and you may also have other  
rights which vary from state to state. Please see our web site for more warranty details.  
If you encounter any problems with this product, please follow the procedures below.  
A) If it is within the store's return policy period, please return the product to the store  
where you purchased from.  
B) If your purchase has passed the store's return policy period, please follow the steps  
below to have the product repaired or replaced.  
Step 1: Submit your RMA request.  
Goto www.siig.com, clickSupport,then REQUESTAPRODUCTREPLACEMENT  
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request  
will be processed, if the product is determined to be defective, an RMA number will  
be issued.  
Step 2: After obtaining an RMA number, ship the product.  
Properly pack the product for shipping. All accessories that came with the  
original package must be included.  
Clearly write your RMA number on the top of the returned package. SIIG will  
refuse to accept any shipping package, and will not be responsible for a product  
returned without an RMA number posted on the outside of the shipping  
carton.  
You are responsible for the cost of shipping to SIIG. Ship the product to the  
followingaddress:  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
RMA #:  
SIIG will ship the repaired or replaced product via Ground in the U.S. and  
International Economy outside of the U.S. at no cost to the customer.  
7
 
About SIIG, Inc.  
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity  
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,  
and legacy I/O adapters) that bridge the connection between Desktop/  
Notebooksystemsandexternalperipherals. SIIGcontinuestogrowbyadding  
A/V and Digital Signage connectivity solutions to our extensive portfolio.  
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,  
andarebackedbyanextensivemanufacturerwarranty. Highqualitycontrol  
standards are evident by the overall ease of installation and compatibility of  
ourproducts,aswellasoneofthelowestdefectivereturnratesintheindustry.  
SIIG products can be found in computer retail stores, mail order catalogs,  
throughmajordistributors,systemintegrators,andVARsintheAmericasand  
theUK,andthroughe-commercesites.  
PRODUCT NAME  
USB 3.0 Multi Card Reader  
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B  
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE  
FCCCOMPLIANCESTATEMENT:  
This device complies with part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
Phone: 510-657-8688  
USB 3.0 Multi Card Reader is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered  
trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft  
Corporation. All other names used in this publication are for identification only and may be  
trademarks of their respective owners.  
October, 2012  
Copyright © 2012 by SIIG, Inc. All rights reserved.  
 

Sharp CRT Television 32N S500 User Manual
Sharp Flat Panel Television 47SB57UT User Manual
Sherwood Scuba Diving Equipment SRB3108 User Manual
Shure Car Amplifier RK100PK User Manual
Silva Boating Equipment 100B User Manual
Snapper Lawn Aerator 4219 User Manual
Sony Clock Radio ICF CD814 User Manual
Speco Technologies Security Camera HT 8WMTDV User Manual
Stanley Black Decker Automobile Parts AL35 User Manual
Sunbeam Coffee Grinder EM0400 User Manual