Sharp PDAs Smartphones YO 290 User Manual

ELECTRONIC ORGANIZER

MODEL

OPERATION MANUAL

Instrucciones abreviadas en español

YO 290

CONTENTS

Using the Organizer for the First Time ................................................ 1

Auto Power Off Function .............................................................. 2

Backlight ....................................................................................... 2

Adjusting the LCD Contrast ......................................................... 2

Turning the key sound On and Off ............................................... 2

Memory Check ............................................................................. 2

Display Symbols and Part Names ...................................................... 3

Entering Characters ............................................................................ 5

Built-in Calendar and Clock ................................................................ 6

Clock Mode .......................................................................................... 6

Alarm ................................................................................................... 8

Telephone Mode .................................................................................. 9

Calendar Mode .................................................................................. 11

Schedule Mode ................................................................................. 12

Anniversary Mode ............................................................................. 14

To Do Mode ....................................................................................... 15

Memo Mode ....................................................................................... 17

Expense Mode................................................................................... 18

Editing Listings .................................................................................. 20

Deleting Listings ................................................................................ 20

Word Translator Mode ....................................................................... 21

Calculator Mode ................................................................................ 22

Conversion Mode .............................................................................. 23

Secret Function ................................................................................. 25

Game Mode ....................................................................................... 26

Battery Replacement......................................................................... 28

Specifications .................................................................................... 29

Appendices ........................................................................................ 31

Instrucciones abreviadas en espanõl ............................................. S-1

yo290e_u1u

02.6.5, 0:17 PM

Using the Organizer for the First Time

3. Tap

, then

To tap the touch keys, use the touch pen (included in the package).

Be sure to perform the following operations before using the Organizer

for the first time.

The message will appear as “RESET!”.

1. Pull out the battery insulation sheets

from the battery compartment on the

back of the unit.

The Organizer is now initialized. Proceed to set the date and time of

the clock (see page 6).

Note:

• Press the RESET switch using the stylus or similar object.

Do not use an object with a breakable or sharp tip.

The Organizer starts operation.

(The battery insulation sheets were

inserted at the factory to prevent

battery wear.)

If a malfunction occurs under abnormal conditions

If the Organizer is subjected to strong extraneous electrical noise or

shock during use, on rare occasions, all the functions will not work

properly and data may be displayed incorrectly. In such cases, follow

the procedures as shown below.

2. Press the RESET switch.

A message, “RESET?” is displayed.

1. Press the RESET switch.

2. When a message, "RESET?" is displayed, press any key EXCEPT

FOR

RESET

If the first procedure doesn't work, follow the next procedure to

initialize the Organizer's memory. In this case, all the stored data will

be deleted.

1. Press the RESET switch.

2. When a message, "RESET?" is displayed, tap

f, then press

yo290e_u1u

02.6.5, 0:16 PM

Auto Power Off Function

Adjusting the LCD Contrast

, select "LCD CONTRAST" by using

When none of the keys has been pressed or tapped for approxi-

mately 7 minutes, the Organizer automatically turns the power off to

save the operating battery.

1. Tap

, and press

2. Press

or to darken/lighten the display (within 1 through 8).

3. When done, press

Backlight

Turning the key sound On and Off

The Backlight allows you to view the display and use the Organizer

even in low-light conditions. Pressing

once illuminates

1. Tap

, and press

2. Select the key sound function on/off by using

, select "KEY TONE" by using

the display for as long as you continue to use the Organizer; if no

key activities are detected within the specified interval, it will be

turned off automatically.

3. When done, press

•

To turn the Backlight off, press

again.

Memory Check

The Backlight may remain on for less than the preset interval or it

may not function if the battery level is low.

Tap

, select "MEMORY CHECK" by using

, and press

•

The Backlight does not function in the PC Link mode.

Do not use the Backlight unnecessarily.

The memory check display will appear and indicate the remaining

memory space.

•

Since the Backlight drains power from the backlight battery,

excessive use of the Backlight will significantly reduce the life of

your battery.

The previous screen will appear after 2 seconds.

Setting up the Backlight

•

The Backlight can be set to turn off at a specified interval.

1. Tap

, select "BL TIME SET" by using

, and press

2. By using

m, select a desired interval (10, 20, or 30

seconds) and press

yo290e_u1u

02.6.5, 0:16 PM

Display Symbols and Part Names

Display Symbols

2^ndfunction: Indicates that

has been activated.

Hourly Alarm: The Hourly Alarm is ON and will sound every

hour.

Daily Alarm: The Daily Alarm is ON and is set to go off at the

specified time every day.

Schedule sign: Appears when the Home clock time reaches a

Reminder time or a Start time of a schedule listing. Disap-

pears when the time reaches the End time of the listing.

Low Battery sign: Indicates that the battery level is extremely

low. (Replace the operating battery with a new one

immediately.)

Anniversary sign: Appears when a special day will arrive

within days as set in Anniversary Reminder.

Secret sign: Secret function is in effect.

UP sign: More information exists above the current display.

(Press .)

DOWN sign: More information exists below the current display.

(Press .)

CAPS LOCK sign: Capital (uppercase) letters will be entered.

(Listings cannot be recalled without a password.)

• The display examples in this manual show only the symbols required

for each explanation.

To enter small (lowercase) letters, tap

off.

to turn “CAPS”

Beep sound: Key touch sound (beep) is ON.

EDIT mode: The listing on the display can be edited.

yo290e_u1u

02.6.5, 0:16 PM

Part Names

Key Assignments

: 2nd Function key

Stylus

Activates the second function specifically assigned to the next

key tapped.

Option port

Display

; :

(

): English-Spanish dictionary key

( GAME ): Game mode key

( TEL ): Telephone mode key

RESET switch

(on the back of the unit)

Touch Keyboard section

Mode keys

(

SCHEDULE/CALENDAR ): Schedule/Calendar mode key

ENTER key

Backlight key

Cursor keys

( MEMO/ANN ): Memo/Anniversary mode key

( TO DO/EXPENSE ): To Do/Expense mode key

Search keys

( CLOCK/ALARM ): Home Clock/World Clock/Alarm mode key

Power ON/OFF key

( CALC/CONV ): Calculation/Conversion mode key

• In this manual, these Mode keys are represented with icons in parentheses.

yo290e_u1u

02.6.5, 0:16 PM

Making Corrections

Entering Characters

1. Inserting or Overwriting characters

Moving the Cursor

Move the cursor by pressing

Tap

i, once or twice, to insert or overwrite characters.

, or

2. Deleting characters

Entering Characters

can be used for deletion of data in Calculator mode and Rate

figure in Conversion mode.

Entering letters and numbers

The initial setting for entering letters is small (lowercase) letters. To

enter capital (uppercase) letters, turn “CAPS” on by tapping

can be used for deletion of characters.

can also be used to delete listings.

Touch Keyboard

Alphabet entry mode

Number entry mode

Loop Function

Right after the power is turned on, function modes can be browsed

through; every time

key is pressed, the function modes will

sequentially be displayed as below:

• Each time

is tapped, the touch keyboard switches between the

Home Clock World Clock Personal

➠

Business

➠

Other

➠

Alphabet entry mode and the Number entry mode.

To tap the touch keys, use the stylus (included in the package).

• Tap towards the center of each key.

Schedule

➠

Memo

➠

...

Pressing the

order.

key will display the above menus in the reversed

Other characters

Tap

symbols and characters to be selected. To select the desired

symbol/special character, tap the appropriate number of

times at the position where you would like to insert it.

Characters assigned to

to display the symbol entry mode, allowing a total of 32

Press

to select a desired mode; the Organizer will then escape

from the Loop function.

yo290e_u1u

02.6.5, 0:16 PM

Setting the Home Clock

1. If the display is in other mode or World Clock mode, tap

Built-in Calendar and Clock

to enter the Home Clock mode.

Precautions

Note:

•

Calendar, Schedule, Expense, and Clock modes allow you to

enter the desired date and time between Jan. 1, 1950 and Dec.

31, 2150.

• During the period of the Daylight Saving Time (summer time), set the

DST ON beforehand as described on page 7, "Setting Daylight

Saving Time ON/OFF".

•

If an attempt is made to store an invalid time or date, you will not

be able to move the cursor to date entering, or store the time and

2. Tap

The Organizer will enter the clock setting mode.

3. Select your Home city using

date by pressing

again.

x. Enter the correct value and press

•

The Organizer has 43 cities according to the time zones (see

page 31).

NE_–

ORK

01^W01 2003

WED

City names can be edited, if

necessary.

:^–:

12 05 35

4. Press

Month position.

to move the cursor to the

Clock Mode

01^W01 2003

WED

NE_–

ORK

The Organizer has both Home Clock and World Clock modes. The

display switches between Home and World clock each time

5. Enter the appropriate month.

:^–:

Enter the day and then year in the

same way.

is tapped.

12 05 35

6. Press

the Hour position.

to move the cursor to

RLD

L _–

NDO^WN

NE_–

ORK

^–: :

:^–:

–

2003

1 1 2003

WED

01^W24 2003

WED

7. Enter the appropriate hour.

^–: :

12 00 00

5 00 00

12 05 35

8. Enter the minutes and seconds in the same manner.

Home Clock Mode

World Clock Mode

9. Select AM or PM using

(

yo290e_u1u

02.6.5, 0:16 PM

10.Press

to set the Clock.

Setting Daylight Saving Time (DST: Summer time) ON/OFF

–

The clock starts from exactly the

set time.

ORK

1. Tap

once to switch the DST

–

FRI

²⁴:²⁰⁰:³

setting. When the DST is ON, “ ”

appears.

ORK

–

TUE

¹²:²⁰⁰:³

10 16 15

9 43 21

Selecting the date format (Default: Month-Day-Year)

1. Tap

, select "DATE FORMAT" by using

m, and press

Changing the World Clock city to the Home Clock city

2. Select the desired date format by using

, and press

A different city in another time zone can be set as the home city at will,

without adjusting the stored correct time.

Mode

Month-Day-Year

(MM-DD-YYYY)

Year-Month-Day

(YYYY-MM-DD)

Day-Month-Year

(DD-MM-YYYY)

1. Tap

once or twice to display the World clock.

Jan 24,2003 01-24-2003

2003-01-24

24-01-2003

2. To set the new home city, select the desired city by using

Note:

• The selected date format affects each mode in the Organizer.

3. Tap

clocks.

• The previous home city is now set as the world city.

4. Tap to check the home city.

• The selected city in step 2 is now set as the home city.

to change the cities between the Home and the World

Selecting the 12- or 24-hour time system (Default: 12 hour)

1. Tap 12/24 the appropriate number of times to select the 12 hour or

24 hour system.

12 hour

24 hour

–

ORK

–

FRI

–

FRI

²⁴:²⁰⁰:³

3 23 17

15 23 17

In the 12-hour system, 12:00 AM: midnight, 12:00 PM: noon.

yo290e_u1u

02.6.5, 0:16 PM

Setting the Daily Alarm time

Set up the Daily Alarm to go off at a specified time.

Alarm

The Organizer has 3 kinds of alarm:

1. Tap

The Alarm display will appear.

2. Press or to select

the Alarm1, Alarm2, or Alarm3.

once, twice, or three times.

1. Daily Alarm.......... Sounds every day at the specified time(for

approx. 1 minute), when "

" is displayed.

ALAR

Up to 3 alarms can be set separately (Alarm1,

Alarm2, and Alarm3).

2. Hourly Alarm........Sounds every hour precisely (every time minutes

reach "00"), when " " is displayed.

– –

3. Schedule Alarm... Sounds at the specified times of schedule listings

(see page 12).

(Alarm3 is OFF)

3. Press

to turn on the Alarm.

Press any key to stop the Alarm sounding.

ALAR

(The display differs between the

12 hour and 24 hour systems.)

Turning the Daily and Hourly Alarms ON/OFF

The Daily and Hourly Alarms can sound when the respective

12 00 A

symbols ("

" and " ") are displayed.

(Alarm3 is ON)

4. Tap

to specify the time.

1. Tap

or three times.

The Alarm display will appear.

once twice,

ALAR

5. Enter the desired time.

6. Press

– –

Note:

• You can turn the respective alarms (Alarms 1 to 3) ON/OFF. Display

the desired Alarm following the above steps 1 and 2, then press

or to display the time (ON) or to hide the time (OFF). When turned

off, the Alarm will not sound even when the " " is displayed.

2. Tap " " appropriate times. Each time you tap " ", the combination

of symbols switches.

Note:

• Alarms will sound even when the Organizer is turned off.

yo290e_u1u

02.6.5, 0:16 PM

Each entry has the following 14 fields.

Field Name

Telephone Mode

Maximum number of

alphanumeric characters

There are three telephone listing categories, Business, Personal,

and Others. Each listing can be simply classified for easy access to

the data.

Last name:

First name:

Company:

Home#:

Office#:

Fax#:

Tap v

, select the desired category by using

m, and press

PERS

NAL

SEARCH NA

SEAR

H NA

Mobile#:

E-mail:

Address:

City:

State:

Zip code:

Country:

Note:

THERS

SEAR

H NA

yo290e_u1u

02.6.5, 0:16 PM

6. Press

to move the cursor to the Home # field.

Entry

7. Enter “585-4280”.

1. Tap

then press

, and select “BUSINESS”,

8. Press

7320”.

to move the cursor to the Office # field and enter “619-542-

SEARCH NAME?

The Business search display will

appear.

9. Enter each field in the same manner.

10.At the Note field, press to store the telephone listing.

The Business search display will appear.

2. Tap

The display will change to the

record input mode.

LAST NAME 0

F IRST NA

OMPANY

3. Enter the Last name.

For example, “Smith”.

4. Press

, then enter the First name. For example, “John”.

5. Press

to move the cursor to the Company field and enter “ABC

International Co.”.

yo290e_u1u

02.6.5, 0:16 PM

Calendar Mode

Last Name Alphabetical Search

1. Tap

and select the Category by using

key, then press

Navigating the Monthly Calendar Display

The search display will appear.

CALENDAR/SCHEDULE

1. Tap

once or twice to enter the Calendar mode.

The monthly calendar of the current month will appear.

The current day will be flashing.

2. Press

order.

to search for the target listing in alphabetical

Navigate the calendar using the following keys:

< > : displays the following or previous month.

Last Name Direct Search

1. Tap

(Business, in this example) by

using or key, then press

and select the Category

i s

: Go to previous day

: Go to next day

–

2003

SEARCH NAME?

: Go to the previous week

: Go to the next week

10 11 12 13 14 15 16

17 18 19 20 21 22 23

The search display will appear.

2. Enter some of the last name letters in order.

Up to 10 letters can be entered.

•

and

cursors can move only within the month

displayed.

3. Press

to search for the target listing.

If there is no data matched, “NOT FOUND!” will appear, and then

the screen will return to the initial display.

See also

Entering Characters ................................................... 5

Editing Listings ......................................................... 20

Deleting Listings ....................................................... 20

yo290e_u1u

02.6.5, 0:16 PM

Directly go to the target month

Schedule Mode

1. At the Calendar mode, tap

–

CALENDAR>

Date input screen will appear.

2. Enter the target date.

Entry

SEAR

H DATE?

12 2003

–

A project meeting will be held from 10:00 AM to 11:00 AM on

September 11, 2003

3. Press

The monthly calendar of the target

date will appear.

–

CHEDULE>

CALENDAR/SCHEDULE

1. Tap

once or

SEAR

H DATE?

twice to enter the Schedule mode.

Note:

12 2003

–

• In the Calendar mode, monthly calendars from January 1950

to December 2150 are available.

The Schedule search display will

appear.

The current date will be displayed and the cursor at the first number

flashes.

Confirmation of the Schedule, To Do, and Anniversary

Mode entries

You can see the dates to which you assigned a Schedule, To Do or

Anniversary on the monthly calendar display.

The first number depends on your Date Format selection. These

examples are in the MM-DD-YYYY format.

2. Tap

e. The Schedule entry

–

12 2003

–

The indication marks are displayed as follows:

display will appear. Enter 09 for

month.

START 05 54 P

END

05 54 P

ALAR

YES

INDER

3. Enter the target day/year in the

same manner.

–

11 2003

–

START 10 00 A

4. Press

Start time.

m, and enter 10:00AM for

END

05 54 P

ALAR

YES

INDER

yo290e_u1u

02.6.5, 0:16 PM

5. Press

9. Enter the name of the scheduled item into the PLAN field. (Project

meeting).

The End time will automatically change to 30 minutes after the Start

time. (However, the End time will remain within the specified day.)

Up to 96 alphanumeric characters can be entered.

6. Enter 11:00AM for the End time, and press

7. Press or to select

“Yes” or “No” for Alarm setting, and

press

10.Press

to store the schedule listing.

Note:

START 10 00 A

• When the Home clock time reaches a Reminder time, the Schedule

Alarm will sound for approx. 30 seconds even while the power is

turned off. Press any key to stop the Alarm sounding. When

END

11 00 A

ALAR

YES

RE INDER

00^M

IN. BEFORE

If you select “Yes”, the Schedule

Alarm will sound at the time set in

is pressed, the listing can be seen in detail in the Schedule mode.

Reminder minutes before the Start time. If you select “No”, Schedule

Alarm will not sound.

Note:

END

11 00 A

Search today’s schedule

• If you select “No” in step 7, “PLAN”

will appear instead.

Go step 9 to continue.

ALAR

CALENDAR/SCHEDULE

1. Tap

once or twice to enter the Schedule mode.

00^M

IN. BEF

^{– – –}R^–E^–

RE INDER

2. Tap

to search for

–

12 2003

–

the target schedule listing.

The listings stored in the

Organizer will be displayed in

chronological order.

PLAN 0

START 12 15 P

END

12 45 P

ALAR

YES

8. Enter the appropriate time for

Reminder and press

Schedule Alarm will sound at the

entered time before the Start time.

You can select any number from

00 to 99.

END

11 00 A

INDER

ALAR

YES

RE INDER

05^M

IN. BEFORE

PLAN 0

Note:

• Enter the number in two-digit format.

yo290e_u1u

02.6.5, 0:16 PM

Date search

Anniversary Mode

CALENDAR/SCHEDULE

1. Tap

once or twice to enter the Schedule mode.

In Anniversary mode, you can specify the month and day (such as

wedding anniversaries and birthdays).

2. Set the desired date.

–

CHEDULE>

–

Select the month, day and year

field, and enter the desired

number.

SEAR

H DATE?

Once data is stored as an anniversary, a flag appears on the date

set in the calendar (see page 12). And when within the specified

period, the anniversary sign will appear.

11 2003

The maximum number of characters for each description is 96

alphanumeric characters.

3. Press

target schedule listing of the

specific date.

to search for the

–

11 2003

–

START 10 00 A

Entry

END

11 00 A

ALAR

YES

Pressing

display the listings on that day.

can

INDER

“Nancy’s Birthday” is on February 12th.

1. Tap

enter the Anniversary mode.

2. Tap

;

once or twice to

SEAR

H DATE?

See also

–

Entering Characters ................................................... 5

Editing Listings ......................................................... 20

Deleting Listings ....................................................... 20

The Anniversary entry display will

be displayed and Date will appear.

3. Enter the date, 02 for month and

12 for day.

DA_MTE 02

–

RE INDER

4. Press

5 DAYS BEF

DESC

RI PT I

Reminder date will be flashing.

yo290e_u1u

02.6.5, 0:17 PM

5. Enter the Reminder date from 0 to 9.

6. Press

7. Enter “Nancy’s Birthday”.

8. Press to store the anniversary listing.

To Do Mode

In the To Do mode, you can store your important To Do items with a

priority index.

The anniversary sign (

Reminder.

A ) will not appear until the day is set in

Entry

You have to visit the HK Exhibition by December 10, 2003.

1. Tap

[

once or

–

twice to enter the To Do mode.

SEAR

ATE?

Sequential search

1. Tap

2. Press

–

2003

;

once or twice to enter the Anniversary mode.

to search for the listing.

Date search

Enter the date to go to the target date in the above step 2 and then

press

2. Tap

08 12

–

2003

PR^–I

RI TY

The To Do entry display will

appear.

<PENDING

DESCRI PT I

See also

Entering Characters ................................................... 5

Editing Listings ......................................................... 20

Deleting Listings ....................................................... 20

3. Enter 12 into the month field and enter 10 and 2003 respectively.

4. Press

using

and select the Priority number from 1 (High) to 9 (Low)

or (or enter the number), then press

yo290e_u1u

02.6.5, 0:17 PM

5. Press

to let the status as "PENDING".

Date search

1. Tap

[

once or twice to enter the To Do mode.

6. In the description field, enter what you have to do by the target day.

Enter “Visit HK Exhibition”.

2. Select the month, day or year

field, and enter the desired date.

–

Up to 96 alphanumeric characters can be entered.

SEAR

ATE?

–

2003

7. Press

to store the To Do listing.

3. Press

date.

to search for the target To Do listing of the specific

Sequential search

1. Tap

[

once or twice to enter the To Do mode.

DONE Completed Items

2. Press

> to search for the target To Do listing.

1. Tap

[

once or twice to enter the To Do mode.

The To Do listings are stored in order of their date, pending/done

status, and priorities.

2. Press

> to select the To Do items.

3. Tap e m m to enter the status field.

4. Press or to select "DONE", then press

See also

Entering Characters ................................................... 5

Editing Listings ......................................................... 20

Deleting Listings ....................................................... 20

yo290e_u1u

02.6.5, 0:17 PM

Memo Mode

Sequential Search

You can store memos using the Memo mode. Up to 96 alphanu-

meric characters can be entered per one listing.

1. Tap

The Memo mode search display will appear.

2. Press or to search for the listing.

;

once or twice to enter the Memo mode.

Entry

Direct Search

Enter your passport number: 12AB34567

1. Tap

;

once or twice to enter the Memo mode.

1. Tap

enter the Memo mode.

;

once or twice to

SEAR

H?^M

The search display will appear.

2. Enter the first letter(s) of the

desired memo (ex. “pass”).

Up to 10 letters can be entered.

3. Press

Passpo r t No .

12AB34567

to search for the

target listing.

2. Tap

e and enter as follows.

MEM

Passport No. 12AB34567

No^M. 12AB34567A

Passpo r t

See also

Entering Characters ................................................... 5

Editing Listings ......................................................... 20

Deleting Listings ....................................................... 20

3. Press

to store the memo listing.

yo290e_u1u

02.6.5, 0:17 PM

The first number depends on your Date Format selection. These

examples are in the MM-DD-YYYY format.

Expense Mode

The Expense record function is an easy-to-use method of tracking

personal and business expense information. The Expense Report

allows you to see the total expenses for a single day or for a certain

period.

4. Enter the date, if necessary.

5. Press

6. Select the expense category using

There are 8 preset categories to select.

Meals Hotel Car Phone Fares

(Enter’t ) Entertainment Tips

7. Press , and enter 1200.

Up to 12 digits can be entered.

8. Press

9. Select the payment using

1 Expense:

2 Report:

Item-by-item expense entry and view mode

Display the total expenses for a single day or

a certain period

➠

(Misc) Miscellaneous

➠...

3 Category:

Assign a new category name (up to 7

characters for each)

Entry

Fa r es

UNT

The date is August 18, 2003.

You bought flight tickets for a

business trip costing $1200.

1200 .

PAY

ENT

There are 4 preset payment

systems to select.

<EXPENSE

HECK

EXPENS

1. Tap

[

once or

Cash

➠

Check

➠

Card

➠

Others

➠...

REP

twice to enter the Expense mode.

CATE

2. Press

to select "EXPENSE", then press

The Expense search display will

appear.

–

18 2003

–

ATEGORY

3. Tap

ea l s

0 .

The Expense record entry display

will appear. The current date will

be displayed.

UNT

yo290e_u1u

02.6.5, 0:17 PM

10. Press

“NO” using

“RECEIPT” field.

, and select “YES” or

Summary Report

MOUNT

or > in the

1200 .

1. Tap

[

once or

<EXPENSE

PAY

ENT

twice to enter the Expense mode.

EXPENS

HECK

REP

E I PT

YES

CATE

11. Press

12. Press

, and enter “Flight ticket” in the “MEMO” field.

to store the data.

2. Press

to select "RE-

_–E_–XPENSE_{– –}

PORT", then press

REPORT

Recall

3. Enter the first date from you wish

to summarize the expense. (July

10, 2003)

08 _–18 _–2003

08 ^–18 ^–2003

T^M

Sequential Search

1. Tap

2. Press

The Expense search display will appear.

3. Press to view the next record,

[

once or twice to enter the Expense mode.

to select "EXPENSE", then press

4. Press

to move the cursor to the last date.

5. Enter the last date at you wish to summarize the expense. (August

10, 2003)

to view the previous

record.

6. Press

OTAL

Date Search

Total amount report during the

period will be displayed.

443 . 5

53 . 5

1. Tap

[

once or twice to enter the Expense mode.

ea l s

o t e l

2. Press

to select "EXPENSE", then press

Scroll the page using

The Expense search display will appear.

3. Enter the date you wish to search.

4. Press

Scroll the page using

yo290e_u1u

02.6.5, 0:17 PM

Edit the Category

You can change the category name for your convenience.

Editing Listings

Edit

1. Tap

2. Press

"CATEGORY", then press

[

once or twice to enter the Expense mode.

1. Recall a listing in the desired mode.

to select

ED I T CATE

GORY

2. Tap

ea l s

The display will change to the edit mode.

The edit category display will

appear.

Ho t e l

Ca r

3. Edit the data.

j l k m: move the cursor to left, right, up or down, respectively

Phone

3. Select the category you wish to

: can be used to delete characters

changes between the INSERT mode and the OVERWRITE mode

to store.

change using

4. Tap

4. Press

5. Delete the preset category name using

6. Enter the new category name. (e.g. Books)

Up to 7 characters can be entered for the category name.

Deleting Listings

Delete

7. Press

8. Press

x. Repeat the steps 3 to 7, if necessary.

1. Recall a listing in the desired mode.

2. Tap

The confirmation display will appear.

• To cancel deleting, tap

All the revisions are stored.

Note:

• Entries previously stored under the former category will appear

under the new category after the revisions are made.

3. Press x to delete the listing.

See also

Entering Characters ................................................... 5

Editing Listings ......................................................... 20

Deleting Listings ....................................................... 20

yo290e_u1u

02.6.5, 0:17 PM

Notes:

Word Translator Mode

This device offers an English-Spanish bi-directional word translator

• Indications are set as follows:

(Am): American English

(Br): British English

(adj): Adjective

(adv): Adverb

(n): Noun

(pron): Pronoun

(v): Verb

(f.): Feminine form

(m.): Masculine form

• Sometimes, two identical words may appear in the word list.

• Enter European characters and spaces correctly. Otherwise, the unit

may not be able to complete the search.

• In the Spanish field, you can enter the following letters. Press

function.

English field

1. Tap

]

to enter the English

→

Spanish translation mode.

ENG

SPA

Tap

]

twice to enter

English mode.

E 1

Spanish

→

2. Enter the desired source word

and press

Spanish field

The matching English or

Spanish word will then be displayed.

•

When the small symbol “;” or “:” is turned on, more letters exist.

To view the remaining letters of long words that cannot be

respective letter key repeatedly after tapping

Key

Letters

á à â ä

Key

Letters

accommodated on the screen, use

to scroll.

•

If there is no matching word, “NOT FOUND!” is displayed. The word

next in alphabetical order will then be displayed.

ó ò ô ö

ú ù û ü

é è ê ë

Press

to scroll through the word list, or enter a new

for another search.

word using the keyboard, and press

y´

• Activate “CAPS” ON to enter capitalized letters.

yo290e_u1u

02.6.5, 0:17 PM

Example

Operation

Mixed calculation

Display

–5.5

Calculator Mode

(–24+2) ÷ 4=

The Organizer’s built-in calculator can perform arithmetic calcula-

tions in up to 12 digits.

Constant/repeat calculation

The second figure is a constant value

Calculator mode is selected by

addition,

subtraction,

division)

ULAT

34 + 57 =

45 + 57 =

91.

102.

tapping

the

appropriate number of times.

The first figure is a constant value

multiplication)

Each time you press the key, the

display switches as follows:

O .

68 x 25 =

68 x 40 =

1700.

2720.

Calculation mode

➠

Currency Conversion mode

...

➠

Percentage

Metric Conversion mode

➠

10% of 200

200

20.

25.

220.

160.

Before performing any calculations, tap

display.

twice to clear the

Percentage 9 of 36

10% mark-up

20% discount

200

•

An error occurs if the integer section of the calculation result

Root

exceeds 12 digits, if the memory exceeds 12 digits, or a number

is divided by zero. (“E” is displayed.)

√25 – 9

4³

Aⁿ

= O

64.

Tap

to clear the error message.

* = =

Unit division

1/8

/ =

0.125

Memory function

25 x 5 =

–) 84 ÷ 3 =

+) 68 +17

(Total) =

125.

28.

85.

182.

123456789098 x

145 =

123456789098

145

17901234419210

E17.9012344192

(17.9012344192 x 10¹²= 17901234419200)

yo290e_u1u

02.6.5, 0:17 PM

Currency Conversion Mode

Currency conversion has 5 stages of programmable conversion.

Each stage is capable of 12-digit calculation.

Conversion Mode

Each time you tap

Calculation mode

, the display switches as follows:

➠

Currency Conversion mode

➠

Setting a new currency conversion rate

<Example> Set the following rate: £1 = $1.45

Metric Conversion mode

➠...

1. Tap

the appropriate

URREN

Conversion Table

number of times to select the

Currency Conversion mode.

AD USD

Conversion Pattern

RATE

Unit 1

Unit 2

2. Press

the appropriate currency

conversion stage.

to select

5 currency conversions are available.

Metric Conversion Patterns

inch

⇔

centimeter (cm)

3. Tap

yard

mile

meter (m)

kilometer (km)

Celsius (°C)

meter (m)

The setting mode will appear.

The preset currency names can be renamed here.

Fahrenheit (°F)

feet

4. Rename the left currency if necessary, then press

Note:

•

unit.

ounce (oz)

pound (lb)

US gallon (gal)

UK gallon (gal)

gram (g)

Up to 4 characters can be entered for the name of the currency

kilogram (kg)

liter (l US)

liter (l UK)

5. Rename the right currency if necessary, then press

Note:

•

The conversion result may have a slight calculation error as a result

of rounding off the number. Use the result for reference only.

yo290e_u1u

02.6.5, 0:17 PM

6. Enter the rate; 1.45.

Up to 12 numeric characters can

be entered for the rate.

Metric Conversion Mode

Metric conversion is capable of 12-digit calculation.

URREN

BP USD

RATE

Convert metric unit

If you need to clear the rate

number, tap

. 45

7. Press

to store the setting.

Calculate 68°F to °C

1. Tap

Metric Conversion mode.

2. Tap or to select the

the appropriate number of times to select the

Currency conversion

Be sure to set the rate before starting a conversion.

<e.g. £

1. Tap

➠

(

ETRI

appropriate conversion stage.

the appropriate number of times to select the

Currency Conversion mode.

RATE

2. Press

stage.

to select the appropriate currency conversion

–

)

F 32 5 / 9

3. Enter the amount. (e.g. £50)

4. Press

(£50=approx. $72.5)

3. Enter the amount, “68”.

4. Press

(68°F=approx. 20°C)

Tap to clear the calculation

result.

URREN

50 .

ETRI

BP USD

°C

68 .

72 . 5

20 .

<e.g. $

5. Enter the amount. (e.g. $120)

6. Press

($120=approx. £82.76)

Use or to change the

conversion direction.

Tap to clear the calculation

result.

➠

£>

CURREN

BP USD

120 .

82 . 7586206896

yo290e_u1u

02.6.5, 0:17 PM

Changing the Password

Secret Function

1. In the Home Clock mode, tap (secret).

The password entry display will appear.

2. Enter the current password.

The Secret function allows you to protect listings with a password,

so that no unauthorized person can reach them.

You can use up to a 6 characters as its password.

3. Press

4. Select “EDIT PASSWORD” by

using or , then press

x. The Secret function setting display will appear.

Registering a Password

As a safeguard, make a written record of the password. Also, be aware

that the password is case-sensitive.

RET

ED I T PASS

UNLOCK DA^WTA

ORD

5. Enter a new password.

6. Press

7. When the screen "RECONFIRM!" appears, reenter the password,

then press

1. Tap (secret) in the Home Clock

mode.

PASS

RET

ORD

The password entry display will

appear.

Turning the Secret Function Off

1. In the Home Clock mode, tap (secret).

The password entry display will appear.

2. Enter the characters you wish to use.

3. Press

4. When the display "RECONFIRM!" appears, reenter the password,

then press . The Secret function will be turned on.

2. Enter the current password, then press

3. Select "UNLOCK DATA" by using or

, then press

Accessing listings

If the Secret function is on, when you press

UNLOCK DATA?" will be displayed.

4. Press

to delete the password and to turn the Secret

[

or you enter the Schedule mode etc., the

password entry display will appear.

1. Enter the password, then press

function off.

Be aware that the password is case-sensitive.

The screen of the target mode will be displayed.

yo290e_u1u

02.6.5, 0:17 PM

Your hand

The dealer’s hand

4. Tap

Each time you tap

card is dealt.

to see your hand.

Game Mode

@, a new

BLA

KJACK

Tap

_ once or twice to play the game “BLACKJACK” or “ALPHA

ATTACK”.

•

“J”, “Q”, and “K” are counted as

J28

10.

Each time you tap

and “ALPHAATTACK”.

_, the display switches between “BLACKJACK”

•

“A” can be counted as 1 or 11.

When first 2 cards are “A” and

a face card (“J”, “Q”, or “K”),

your hand is “BLACKJACK”.

Your bet

Your chips

BLACKJACK (Twenty-one)

Make your “hand” (the total of the numbers on the cards) close to 21,

without going over 21.

Your total

The dealer’s total

5. Press

to stop being dealt

1. Tap

once or twice to

and hold your hand. The dealer’s

hand and the results are

displayed.

BLA

KJA

BLA

KJA

display the following Game

mode screen.

J28

32K4

2. Press

to start a game.

•

When you win, your total

flashes and your bet is

doubled.

The left 2 cards are dealt for

you. (One is faced up and the

other is faced down.)

Your chips

Your bet

Your chips

•

When you win with “BLACK-

JACK”, your bet is tripled.

3. Agree the left-displayed flashing maximum bet (up to 10) or enter

the fewer bet.

6. Press

and display the Game mode screen.

•

When you have no more chips to bet, the game is over.

To quit the game, tap any mode key. Your chips are stored for the

next time.

yo290e_u1u

02.6.5, 0:17 PM

ALPHA ATTACK

Type in characters (A to Z) displayed on the bottom line to clear them.

The game is divided into 20 levels in speed.

1. Tap

once or twice to

ALPH

ATTA

display the following Game

mode screen.

LEVEL 01

2. Press

the level.

• 01: slow, 20: fast

3. Press to start a game.

to select

ALPH

ATTA

LEVEL 03

EYKW

4. Tap the same key as the first character at the left end of the bottom

line. (In this case, tap keys in the order: E W.)

Tapping the correct keys in the correct order deletes the

→

•

characters.

When 12 characters are displayed in each level, the game

continues in the faster level (up to 20).

When no more characters can be displayed, the game is over.

The Game mode screen with the level when the game is over is

displayed.

•

To quit the game, tap any mode key.

yo290e_u1u

02.6.5, 0:17 PM

Operating Battery Replacement

Battery replacement time

Battery Replacement

Batteries used

When “

B” is displayed, immediately replace the operating

Type

Model

Quantity

Use

battery with a new one. Follow the steps on page 29.

The operating battery holder is indicated as "For OPERATION"

under the battery holder cover.

If the battery level is low, the alarm may not sound, or similarly the

Backlight may not function or remain on for less than the set

interval. Continued use of the Organizer with low battery can alter or

clear the memory contents. Memory contents may be lost if the

battery is improperly replaced or if the following instructions are

disregarded.

Lithium battery

CR2032

Unit operation

Backlighting

•

Be sure to write down any important information stored in the

memory before replacing the batteries.

Precautions

Since improper use of the batteries may cause leakage or

explosion, strictly observe the following instructions:

Caution:

•

If fluid from a leaking battery accidentally gets into your eyes, it

may result in serious injury. Should this occur, flush your eyes

with clean water and consult a physician immediately.

Should fluid from a leaking battery come into contact with your

skin or clothes, immediately wash with clean water.

If the Organizer will not be used for an extended period of time, to

avoid damaging the Organizer remove batteries and store in a

safe place.

• PC-LINK may not be available when the battery level is low.

• Expense Report (Summary Report) may not be available when the

battery level is low.

• Under the low battery condition, new data entry and editing of

existing data may not be performed in some modes. Also Clock and

other settings may not be made.

•

Do not leave exhausted batteries inside the Organizer.

Do not use different types of batteries or partially used batteries.

Insert the battery with its positive side (+) correctly orientated.

Never throw batteries into a fire because they might explode.

Keep batteries out of reach of children.

When batteries become near exhaustion, remove them from the

Organizer immediately to avoid battery leakage and corrosion

inside the Organizer.

Backlight Battery Replacement

When the Backlight cannot be turned on (except when “

displayed or the Organizer is in the PC Link mode), replace the

backlight battery. Follow the steps on page 29.

The backlight battery holder is indicated as "For Back Light"

under the battery holder cover.

B” is

Because the batteries in the Organizer were installed at the factory,

they may become exhausted before the specified expiration time is

reached.

yo290e_u1u

02.6.5, 0:17 PM

Replacing the batteries

Specifications

•

Make sure the power is turned off before replacing the batteries.

Model:

Product name:

Display:

YO-290

Electronic Organizer

•

Do not press

completed.

until the battery replacement procedure is

14 columns x 5 lines with the Backlight

768 KB, Flash memory

Approx. 754 KB

A) In case of telephone listings only:

Max. 290 listings

B) Other listings:

Max. 4000 listings (2000 per each)

Listings can be stored until the total of both

types (A and B) reaches 754 KB

Memory capacity:

User area:

1. Press

to turn the power off.

2. Loosen the screw (turn counterclockwise) and

remove the battery holder cover on the back

of the unit.

RESET

3. Remove one used battery using a ball-point

pen or similar object.

•

Do not use a mechanical pencil or sharp

pointed object.

RESET

Clock mode

Accuracy:

Display:

60 seconds/month (at 25°C/77°F)

Year, month, day, day of the week, hour, minute,

second, AM/PM, city name

4. Install one new battery with the positive side

(+) facing up.

5. Repeat step 3 and 4 for replacing both

batteries, if necessary.

Clock system:

Telephone mode:

Calendar mode:

12-hour/24-hour format (switchable), 3 types of

date format (switchable), World clock function,

daylight saving time/summer time display

function, daily/hourly/schedule alarm function

Entry and recall of Last name, First name,

Company, Home#, Office#, Fax#, Mobile#,

E-mail, Address, City, State, Zip code, Country,

Note

From Jan.,1950 to Dec., 2150, Confirmation of

the Schedule, To Do, and Anniversary mode

entries can be made by the indication marks

seen on the right side of the date

6. Replace the holder cover and secure with the

screw.

7. The power will be turned on 2 to 3 seconds after

8. Set the clock to the correct time.

is pressed.

Caution:

• Clock settings and/or other settings and listings may be lost when

batteries are removed for a long time. Replace the batteries as

quickly as possible.

• Make sure to confirm all settings are set correctly after replacing the

batteries.

yo290e_u1u

02.6.5, 0:17 PM

0 . 1 2 3 4 5 6 7 8 9

Schedule mode:

Entry and recall of schedule (year, month, day,

hour and minute), schedule alarm and

Description

Operating temperature

Power supply:

Operating battery: 3.0V ... (DC) (Lithium battery CR2032 x 1)

Backlight battery: 3.0V ... (DC) (Lithium battery CR2032 x 1)

Auto Power Off Function:

Approx. 7 minutes

Battery life:

Operating battery (at 25°C/77°F)

• Approx. 2400 hours

0°C ~ 40°C (32°F ~ 104°F)

–

Anniversary mode: Entry and recall of month, day and description

of anniversaries

Entry and recall of To Do listings (Due Date,

Priority and Description)

To Do mode:

Memo mode:

Expense mode:

Entry and recall of memo listings

Entry and recall of Expense listings (Date,

Category, Amount, Payment, Receipt and

Memo) and Summary Report during a specified

period to display the total amount spent in a

preset category, Meals, Hotel, Car, Phone,

Fares, Entertainment, Tips and Miscellaneous,

that can be changed with the selection of edit

Category.

When data is continuously displayed.

• Approx. 1600 hours

When data is searched for 5 minutes and displayed for

55 minutes per hourly use.

• Approx. 2 year

When turned off and the clock is running.

Backlight battery (at 25°C/77°F)

• Approx. 4000 times

Word translator mode: English from/to Spanish, approx. 10000 words

for each language

When the Backlight is turned on for 10 seconds and

turned off for 50 seconds per minute.

Calculator mode:

12 digits (with calculation status symbol) Addition,

subtraction, multiplication, division, percentage,

square root, memory calculation, etc.

Weight:

Dimensions:

Approx. 105 g (0.23 lb.) (Including batteries)

Currency/Unit conversion mode:

12 digits, 14 combinations of currencies (5) and

69.8 mm (W) x 109.3 mm (D) x 15.3 mm (H)

2-3/4" (W) x 4-5/16" (D) x 19/32" (H)

metric (9) conversions

Accessories:2 lithium batteries (installed), one 3.5" floppy disk,

Game mode:

Secret function:

2 games

Protects listings with a password

PC interface cable, operation manual, stylus

Power consumption: 0.05 W

yo290e_u1u

02.6.5, 0:17 PM

0 . 1 2 3 4 5 6 7 8 9

Appendices

A. Names and zone numbers of the cities in the clock

B. Using the PC Link mode

Zone No.

City

Zone No.

City

Exchanging Data with a PC

TONGA

CAIRO

With the PC Link software and cable, data can be

exchanged between the Organizer and a PC.

AUCKLAND

WELLINGTON

NOUMEA

GUAM

SYDNEY

ADELAIDE

TOKYO

HELSINKI

BARCELONA

AMSTERDAM

ROME

To set up the Organizer for use with the PC Link:

1. Turn off your PC and the Organizer.

BERLIN

PARIS

LISBON

2. Connect the Organizer and the PC. (See the PC Link

manual for details.)

3. 3

SINGAPORE

HONG KONG

BEIJING

BANGKOK

YANGON

DHAKA

DELHI

KARACHI

KABUL

LONDON

AZORES ISLANDS

––––––

MID ATLANTIC

RIO DE JANEIRO

CARACAS

TORONTO

NEW YORK

CHICAGO

3. Turn on your PC and the Organizer.

4. Tap h !, select "PC LINK" by using

, and press

6. 3

7. 3

8. 3

9. 3

Your Organizer is now ready for data transferring (the PC

Link mode). Consult the PC Link manual regarding

subsequent data transferring procedures.

Note:

• To exit the PC Link mode, press

at any time. Be noted

DUBAI

TEHRAN

RIYADH

DENVER

that under the PC Link mode, the Organizer will consume

extra power out of the operating battery while setting the

Auto Power Off function deactivated. If the PC Link mode

is entered by mistake, make sure to leave the PC Link

LOS ANGELES

ANCHORAGE

HONOLULU

MIDWAY ISLANDS

MOSCOW

mode by pressing

to conserve the battery power.

yo290e_u1u

02.6.5, 0:17 PM

PRODUCT SUPPORT

Declaration of Conformity

Electronic Organizer : YO-290

If you have read the ORGANIZER operation manual, but you still require

product support, you can:

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Call a SHARP Customer Assistance Center

630-378-3590

(7am to 7pm CST M – F)

Responsible Party:

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-1163

TEL: 1-800-BE-SHARP

Visit our Web Site

http://www.sharpusa.com

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

Send an E-mail

[email protected]

WARNING – FCC Regulations state that any unauthorized changes or

modifications to this equipment not expressly approved by the manufac-

turer could void the user's authority to operate this equipment.

Write to our Customer Assistance Center

SHARP Electronics Corp.

Customer Assistance Center

Att: WIZARD HELP

1300 Naperville Drive

Romeoville, IL 60446

Note: This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

Note: A shielded interface cable is required to ensure compliance with

FCC regulations for Class B certification.

yo290e_u1u

02.6.5, 0:17 PM

ESPAÑOL

Instrucciones abreviadas en español

Empleo del Organizador por primera vez

Asegúrese de realizar las operaciones siguientes antes de emplear el

Organizador por primera vez.

ÍNDICE

Empleo del organizador por primera vez ................................... S-1

Función de desconexión automática ....................................... S-2

Luz de fondo ............................................................................ S-2

Ajuste del contraste de LCD .................................................... S-2

Activación y desactivación del sonido de las teclas ............... S-2

Comprobación de la memoria ................................................. S-2

Teclado táctil ............................................................................ S-3

Modo de reloj ........................................................................... S-3

Modo de teléfono ..................................................................... S-4

Modo de calendario ................................................................. S-5

Modo de programa de actividades .......................................... S-6

Modo de aniversario ................................................................ S-8

Modo de cosas a hacer (“To Do”) ............................................ S-8

Modo de apuntes ................................................................... S-10

Modo de gastos...................................................................... S-11

Edición de los listas ............................................................... S-12

Borrado de los listas .............................................................. S-12

Modo del traductor de palabras ............................................. S-13

Modo de conversión ............................................................... S-14

Modo de juego ....................................................................... S-15

Reemplazo de las pilas .......................................................... S-16

1. Saque las hojas de aislamiento de las

pilas del compartimiento de las pilas

situado en la parte posterior de la

unidad.

El Organizador empieza a funcionar.

(Las hojas de aislamiento de las pilas

fueron insertadas en la fábrica para

impedir que se agoten las pilas.)

2. Pulse el interruptor RESET.

RESET

Se visualizará el mensaje “RESET?”.

3. Pulse

, y luego

Para pulsar las teclas táctiles, emplee el lapicero (incluido en el

paquete).

Aparecerá el mensaje “RESET!”.

El Organizador se inicializará ahora. Ponga la fecha y la hora en el

reloj (consulte la página S-3).

Nota

• Pulse el interruptor RESET con el lapicero incorporado o con un

objeto similar.

No utilice un objeto cuya punta pueda romperse o esté muy afilada.

S-1

yo290s_u1u

02.6.5, 0:19 PM

2. Utilizando

(10, 20 o 30 segundos) y pulse

m, seleccione un intervalo de tiempo deseado

Función de desconexión automática

Cuando ninguna de las teclas haya sido pulsada durante

aproximadamente 7 minutos, el Organizador desconectará

automáticamente la alimentación para ahorrar energía de las pilas

de funcionamiento.

Ajuste del contraste de LCD

, seleccione “LCD CONTRAST”

1. Pulse

utilizando

, y pulse

Luz de fondo

2. Pulse

8).

para oscurecer/iluminar el visualizador (entre 1 y

La luz de fondo le permitirá ver el visualizador y utilizar el

3. Cuando termine, pulse

Organizador incluso en condiciones de baja iluminación. Al pulsar

una vez se ilumina el visualizador durante tanto tiempo

Activación y desactivación del sonido de las teclas

como se utiliza el Organizador; si no se detecta ninguna actividad

de las teclas dentro del intervalo especificado, el Organizador se

apagará automáticamente.

, seleccione “KEY TONE”

1. Pulse

utilizando

2. Seleccione la activación/desactivación de la función de sonido de

las teclas utilizando

3. Cuando termine, pulse

, y pulse

•

Para apagar la luz de fondo, vuelva a pulsar

La luz de fondo puede permanecer encendida durante menos

tiempo del preajustado o puede no funcionar si el nivel de las

pilas está bajo.

Comprobación de la memoria

•

La luz de fondo no funciona en el modo PC Link.

, seleccione “MEMORY CHECK”

Pulse

No utilice innecesariamente la luz de fondo.

utilizando

, y pulse

•

Dado que la luz de fondo consume energía de las pilas de

funcionamiento, su abuso podrá reducir considerablemente la

duración de sus pilas.

La visualización de verificación de la memoria aparecerá e indicará

el espacio que queda libre en la memoria.

Apagado de la luz de fondo

La pantalla anterior aparecerá después de transcurridos 2

segundos.

•

La luz de fondo puede ajustarse para que se apague una vez

transcurrido un intervalo especificado.

, seleccione "BL TIME SET"

1. Pulse

utilizando

, y pulse

S-2

yo290s_u1u

02.6.5, 0:20 PM

Teclado táctil

Modo de introducción de letras Modo de introducción de números

Modo de reloj

Ajuste del reloj local

1. Si el visualizador está en otro modo o en el modo del reloj mundial,

pulse

Nota:

• Durante el periodo de la hora de verano, ponga de antemano DST

para entrar en el modo del reloj local.

• Cada vez que se pulse

f, el teclado táctil cambiará entre el modo

de introducción de letras y el modo de introducción de números.

Para pulsar las teclas táctiles, utilice el lapicero (incluido en el

paquete).

(horario de verano) en ON. Pulse

ajuste de la DST.

una vez para conmutar el

• Pulse sobre el centro de cada tecla.

2. Pulse

El Organizador entrará en el modo de ajuste del reloj.

3. Seleccione su ciudad de residencia

HOM

utilizando

NE_–

01^W01 2003

WED

:^–:

12 05 35

4. Pulse

para mover el cursor a la posición Month.

5. Introduzca el mes apropiado.

Introduzca de la misma forma el día y luego el año.

6. Pulse

7. Introduzca la hora apropiada.

8. Introduzca de la misma forma los minutos y luego los segundos.

9. Seleccione AM o PM utilizando

para mover el cursor a la posición Hour.

(

S-3

yo290s_u1u

02.6.5, 0:20 PM

10.Pulse

reloj.

para ajustar el

6. Pulse

7. Introduzca “585-4280”.

8. Pulse para mover el cursor al campo Office # e introduzca “619-

para mover el cursor al campo Home #.

–

ORK

El reloj empieza exactamente a

partir de la hora ajustada.

–

FRI

²⁴:²⁰⁰:³

542-7320”.

10 16 15

9. Entre en cada campo de la misma forma.

10.En el campo Notes, pulse

teléfonos.

para guardar las listas de

Modo de teléfono

Aparecerá la visualización de búsqueda Business.

Entrada

1. Pulse

NESS”, y luego pulse

, seleccione “BUSI-

SEARCH NAME?

2. Pulse

El visualizador cambiará al modo de introducción de registro.

3. Introduzca el apellido.

Por ejemplo, “Smith”.

4. Pulse

y luego introduzca el nombre. Por ejemplo, “John”.

5. Pulse

para mover el cursor al campo de las compañías e

introduzca “ABC International Co.”

S-4

yo290s_u1u

02.6.5, 0:20 PM

Búsqueda

Modo de calendario

Búsqueda alfabética del apellido

1. Pulse

luego pulse

Aparecerá la visualización de búsqueda.

2. Pulse para buscar en orden alfabético la lista

deseada.

y seleccione la categoría utilizando la tecla

Navegación en la visualización del calendario mensual

CALENDAR/SCHEDULE

1. Pulse

una o dos veces para entrar en el modo

de calendario.

Aparecerá el calendario mensual del mes actual.

Parpadeará el día actual.

Búsqueda directa del apellido

Navegue por el calendario utilizando las teclas siguientes:

< > : visualiza el mes

posterior o anterior.

1. Pulse

categoría (Business, en este

ejemplo) utilizando la tecla

, luego pulse

y seleccione la

i s

–

2003

SEARCH NAME?

: Vaya al día anterior

10 11 12 13 14 15 16

17 18 19 20 21 22 23

: Vaya el día siguiente

Aparecerá la visualización de

búsqueda.

: Vaya a la semana anterior

: Vaya a la semana siguiente

2. Introduzca en orden algunas de las letras del apellido.

Se puede introducir un máximo de 10 letras.

• Los cursores

sólo se pueden mover dentro del

3. Pulse

para buscar la lista deseada.

mes visualizado.

Si no hay datos que coincidan aparecerá “NOT FOUND!”, y la

pantalla volverá luego a la visualización inicial.

Vaya directamente al mes deseado

1. En el modo de calendario, pulse

Consulte también

Edición de listas ................................................... S-12

Borrado de listas .................................................. S-12

–

CALENDAR>

SEAR

H DATE?

Aparecerá la pantalla de

introducción de la fecha.

12 2003

–

2. Introduzca la fecha deseada.

S-5

yo290s_u1u

02.6.5, 0:20 PM

CALENDAR/SCHEDULE

una o

dos veces para entrar en el modo

de programa de actividades.

3. Pulse

Aparecerá el calendario mensual de la fecha deseada.

Nota:

• En el modo de calendario se encontrarán disponibles los calendarios

mensuales de enero de 1950 a diciembre de 2150.

1. Pulse

–

CHEDULE>

–

SEAR

H DATE?

12 2003

Aparecerá la visualización de

búsqueda del programa de

actividades.

Confirmación de las entradas de los modos de programa

de actividades, cosas a hacer y aniversario

La fecha actual se visualizará y el cursor situado en el primer

número parpadeará.

En la visualización del calendario mensual usted puede ver las

fechas a las que ha asignado un programa de actividades, cosas a

hacer o un aniversario.

El primer número depende de su elección del formato de la fecha.

Estos ejemplos están en el formato MM-DD-AAAA.

2. Pulse

visualización de introducción del

programa de actividades.

e. Aparecerá la

–

12 2003

–

Las marcas de indicación se visualizan de la forma siguiente:

START 05 54 P

END

05 54 P

Introduzca 09 para el mes.

ALAR

YES

INDER

3. Introduzca el día/año deseado de la misma forma.

4. Pulse

5. Pulse

, e introduzca 10:00AM para la hora de inicio.

Modo de programa de actividades

La hora de finalización cambiará automáticamente a 30 minutos

después de la hora de inicio. (Sin embargo, la hora de finalización

permanecerá dentro del día especificado.)

Entrada

6. Introduzca 11:00 AM para la hora de finalización y pulse

El 11 de septiembre de 2003 se celebrará una reunión de las 10:00

AM a las 11:00 AM.

S-6

yo290s_u1u

02.6.5, 0:20 PM

7. Pulse

seleccionar “Yes” o “No” para el

ajuste de la alarma y pulse

para

Búsqueda

START 10 00 A

END

11 00 A

Búsqueda del programa de actividades para hoy

ALAR

YES

CALENDAR/SCHEDULE

1. Pulse

de programa de actividades.

2. Pulse para buscar

una o dos veces para entrar en el modo

Si usted selecciona “Yes”, la

alarma del programa de

actividades sonará al llegar al

comienzo del tiempo restante establecido para antes de la hora de

inicio. Si selecciona “No”, la alarma del programa de actividades no

sonará.

RE INDER

00^M

IN. BEF

ORE

–

12 2003

–

START 12 15 P

END

12 45 P

la lista del programas de

actividades deseada.

Las listas guardadas en el

ALAR

YES

INDER

Organizador se visualizarán en orden cronológico.

Nota:

END

11 00 A

• Si selecciona “No” en el paso 7,

aparecerá “PLAN”.

Vaya al paso 9 para continuar.

Búsqueda de fecha

ALAR

00^M

IN. BEF

^{– – –}R^–E^–

RE INDER

CALENDAR/SCHEDULE

1. Pulse

una o dos veces para entrar en el modo

de programa de actividades.

–

CHEDULE>

PLAN 0

2. Ponga la fecha deseada.

SEAR

H DATE?

8. Introduzca el tiempo apropiado para el tiempo restante y pulse

Seleccione el campo del mes, día

y año, e introduzca el número

deseado.

11 2003

–

La alarma del programa de actividades sonará al llegar al comienzo

del tiempo restante introducido para antes de la hora de inicio.

Usted puede seleccionar cualquier número del 00 al 99.

3. Pulse

deseada de la fecha especificada.

Al pulsar se pueden visualizar las listas de ese día.

para buscar la lista de programas de actividades

Nota:

• Introduzca el número en el formato de dos dígitos.

9. Introduzca el nombre del elemento programado en el campo.

(Encuentro).

Consulte también

Edición de listas ................................................... S-12

Borrado de listas .................................................. S-12

Puede introducir un máximo de 96 caracteres alfanuméricos.

10.Pulse

para guardar la lista de programas de actividades.

S-7

yo290s_u1u

02.6.5, 0:20 PM

Búsqueda

Modo de aniversario

Búsqueda secuencial

1. Pulse

aniversario.

2. Pulse

;

una o dos veces para entrar en el modo de

Entrada

para buscar las listas.

“Nancy’s Birthday” el 12 de febrero.

1. Pulse

veces para entrar en el modo de

aniversario.

;

una o dos

Búsqueda de fechas

Introduzca la fecha para ir a la fecha deseada en el paso 2 de arriba y

luego pulse

SEAR

H DATE?

–

2. Pulse

Consulte también

Edición de listas ................................................... S-12

Borrado de listas .................................................. S-12

Aparecerá la visualización de

introducción de aniversario.

DA_MTE 02

–

3. Introduzca la fecha, 02 para el

mes y 12 para el día.

RE INDER

5 DAYS BEF

4. Pulse

DESC

RI PT I

La fecha del recordador

parpadeará.

Modo de cosas a hacer

5. Introduzca la fecha del recordador de 0 a 9.

6. Pulse

7. Introduzca “Nancy’s Birthday”.

8. Pulse para guardar la lista de aniversario.

Entrada

Usted tiene que visitar HK Exhibition el 10 de diciembre de 2003.

1. Pulse

[

una o dos

–

veces para entrar en el modo de

cosas a hacer.

El signo de aniversario (

día en el recordador.

A ) no aparecerá hasta que se ponga el

SEAR

ATE?

–

2003

S-8

yo290s_u1u

02.6.5, 0:20 PM

2. Pulse

Búsqueda de fecha

08 12

–

2003

PR^–I

RI TY

1. Pulse

[

una o dos

Aparecerá la visualización de

cosas a hacer.

–

veces para entrar en el modo de

cosas a hacer.

<PENDING

SEAR

ATE?

DESCRI PT I

–

2003

2. Seleccione el campo del mes, el

día o el año y luego introduzca la

fecha deseada.

3. Introduzca 12 en el campo del mes y luego introduzca 10 y 2003

respectivamente.

4. Pulse

(baja) utilizando

y seleccione el número de prioridad, desde 1 (alta) a 9

(o introduzca el número), y luego

3. Pulse

fecha especificada.

para buscar la lista de cosas a hacer deseada de una

pulse

5. Pulse

para dejar el estado como “PENDING”.

DONE Elementos completados

6. En el campo de descripción, introduzca lo que tiene que hacer para

el día deseado.

Introduzca “Visit HK Exhibition”.

1. Pulse

cosas a hacer.

[

una o dos veces para entrar en el modo de

2. Pulse

hacer.

para seleccionar los elementos de cosas a

Puede introducir un máximo de 96 caracteres alfanuméricos.

7. Pulse

para guardar la lista de cosas a hacer.

3. Pulse e m m para entrar en el campo de estado.

4. Pulse para seleccionar “DONE”, y luego pulse

Búsqueda

Consulte también

Edición de listas ................................................... S-12

Borrado de listas .................................................. S-12

Búsqueda secuencial

1. Pulse

cosas a hacer.

2. Pulse

deseada.

[

una o dos veces para entrar en el modo de

para buscar la lista de cosas a hacer

S-9

yo290s_u1u

02.6.5, 0:20 PM

Búsqueda

Modo de apuntes

Búsqueda secuencial

Puede guardar apuntes empleando el modo de apuntes. Se puede

introducir un máximo de 96 caracteres alfanuméricos por lista.

1. Pulse

apuntes.

Aparecerá la visualización de búsqueda del modo de apuntes.

;

una o dos veces para entrar en el modo de

Entrada

2. Pulse

para buscar las listas.

Introduzca su número de pasaporte: 12AB34567

Búsqueda directa

1. Pulse

;

una o dos

SEAR

H?^M

1. Pulse

;

una o dos veces para entrar en el modo de

veces para entrar en el modo de

apuntes.

Aparecerá la visualización de

búsqueda.

2. Introduzca la(s) primera(s) letra(s)

del apunte deseado (ej. “pasa”).

Se puede introducir un máximo de

10 letras.

Passpo r t No .

12AB34567

2. Pulse

siguiente.

Passport No. 12AB34567

e introduzca lo

MEM

Passpo r t

No^M. 12AB34567A

3. Pulse

para buscar la lista deseada.

Consulte también

3. Pulse

para guardar la lista de apuntes.

Edición de listas ................................................... S-12

Borrado de listas .................................................. S-12

S-10

yo290s_u1u

02.6.5, 0:20 PM

6. Seleccione la categoría de gastos utilizando

Hay 8 categorías preajustadas para elegir.

Modo de gastos

Meals

(Enter’t ) Entertainment

7. Pulse e introduzca 1200.

Se puede introducir un máximo de 12 dígitos.

8. Pulse

9. Seleccione el pago utilizando

➠

Hotel

➠

Car

➠

Phone

➠

Fares

➠

Entrada

La fecha es 18 de agosto de

2003.

Usted adquirió billetes de avión

por un importe de 1200 $ para un

viaje de negocios.

➠

Tips

➠

(Misc) Miscellaneous

➠

...

<EXPENSE

EXPENS

Fa r es

REP

ORT

UNT

CATE

1200 .

PAY

ENT

1. Pulse

veces para entrar en el modo de gastos.

2. Pulse para seleccionar

“EXPENSE”, y luego pulse

[

una o dos

Hay 4 sistemas de pago

preajustados para elegir.

HECK

Cash

10. Pulse

“NO” utilizando

el campo “RECEIPT”.

➠

Check

➠

Card

➠

Others

➠...

–

2003

, y seleccione “YES” o

ATEGORY

MOUNT

ea l s

0 .

1200 .

Aparecerá la visualización de

búsqueda de gastos.

UNT

PAY

ENT

HECK

E I PT

YES

3. Pulse

11. Pulse

12. Pulse

, e introduzca “Flight ticket” en el campo “MEMO”.

El primer número depende de su elección del formato de la fecha.

Estos ejemplos están en el formato MM-DD-AAAA.

para guardar los datos.

4. Introduzca la fecha si es necesario.

5. Pulse

S-11

yo290s_u1u

02.6.5, 0:20 PM

Recuperación

Edición de listas

Búsqueda secuencial

1. Edición

1. Recupere una lista en el modo deseado.

1. Pulse

gastos.

2. Pulse

Aparecerá la visualización de búsqueda de gastos.

3. Pulse para ver el siguiente registro, o para ver el

[

una o dos veces para entrar en el modo de

2. Pulse

para seleccionar “EXPENSE”, y luego pulse

La visualización cambiará al modo de edición.

3. Edite los datos.

registro anterior.

j l k m: mueve el cursor a la izquierda, derecha, arriba o abajo

respectivamente.

: se puede utilizar para borrar caracteres.

: cambia entre el modo INSERT y el modo OVERWRITE.

4. Pulse para guardar.

Consulte también

Edición de listas ................................................... S-12

Borrado de listas .................................................. S-12

Borrado de listas

Borrado

1. Recupere una lista en el modo deseado.

2. Pulse

Aparecerá la visualización de confirmación.

• Para cancelar el borrado, pulse

3. Pulse x para borrar la lista.

S-12

yo290s_u1u

02.6.5, 0:20 PM

Notas:

Modo del traductor de palabras

Este aparato ofrece una función de traducción de inglés a español y

•

Las abreviaturas indican lo siguiente:

(Am): Inglés americano

(Br): Inglés británico

(adj): Adjetivo

(adv): Adverbio

(n): Nombre

(pron): Pronombre

(v): Verbo

(f.): Género femenino

(m.): Género masculino

Algunas veces es posible que aparezcan dos palabras idénticas en

la lista de palabras.

Introduzca correctamente los caracteres europeos y los espacios.

De otra forma, la unidad tal vez no pueda realizar la búsqueda.

En el campo del español, usted podrá introducir las letras

siguientes. Pulse repetidamente la tecla de la letra respectiva

viceversa.

Campo del inglés

1. Pulse

modo de traducción de inglés

español.

Pulse

entrar en el modo de traducción

de español inglés.

2. Introduzca la palabra que

desee traducir y pulse

]

para entrar en el

SPA

→

E 1

]

dos veces para

→

•

Campo del español

Luego se visualizará la correspondiente palabra inglesa o española.

•

Cuando se encienda el pequeño símbolo “;” o “:”, esto indicará

que existen más letras. Para ver las letras restantes de palabras

después de pulsar

largas que no caben en la pantalla, utilice

palabra.

para desplazar la

Tecla

Letras

Tecla

Letras

á à â ä

•

Si no se encuentra la palabra correspondiente se visualiza “NOT

FOUND!”. Luego se visualizará la siguiente palabra en orden

alfabético.

ó ò ô ö

ú ù û ü

é è ê ë

y´

Pulse

para desplazarse por la lista de palabras, o

introduzca una palabra nueva utilizando el teclado, y pulse

para hacer otra búsqueda.

• Active “CAPS” para introducir letras mayúsculas.

S-13

yo290s_u1u

02.6.5, 0:20 PM

6. Introduzca la tasa; 1,45.

Para la tasa se puede introducir

un máximo de 12 caracteres

alfanuméricos.

Modo de conversión

URREN

BP USD

Modo de conversión de divisas

La conversión de divisas tiene 5 etapas de conversión programable.

Cada etapa es capaz de hacer cálculos con 12 dígitos.

RATE

Si necesita borrar el número de la

. 45

tasa, pulse

Ajuste de una nueva tasa de conversión de divisas

7. Pulse

para almacenar el ajuste.

<Ejemplo> Ajuste de la tasa siguiente: £1 = $1,45

Conversión de divisas

Asegúrese de ajustar la tasa antes de iniciar una conversión.

1. Pulse

el número

URREN

apropiado de veces para

seleccionar el modo de

conversión de divisas.

AD USD

<Ej. £

1. Pulse

➠

RATE

el número apropiado de veces para seleccionar

el modo de conversión de divisas.

2. Pulse para seleccionar la etapa de conversión de

divisas apropiada.

3. Introduzca la cantidad. (Ej. £50)

4. Pulse

(£50 = $72,5 aproximadamente)

2. Pulse

seleccionar la etapa de

conversión de divisas apropiada.

para

3. Pulse

Aparecerá el modo de ajuste.

Los nombres de divisas preajustados se pueden cambiar aquí.

URREN

BP USD

50 .

4. Cambie el nombre de la divisa de la izquierda si es necesario, y

luego pulse

Nota:

<Ej. $

5. Introduzca la cantidad. (Ej. $120)

6. Pulse

($120 = £82,76

aproximadamente)

➠

£>

72 . 5

URREN

•

Para el nombre de la unidad de divisa se puede introducir un

máximo de 4 caracteres.

BP USD

120 .

5. Cambie el nombre de la divisa de la derecha si es necesario, y

luego pulse

Utilice

para cambiar la

82 . 7586206896

dirección de conversión.

Pulse

para borrar el resultado del cálculo.

02.6.5, 0:20 PM

S-14

yo290s_u1u

La mano de quien

reparte cartas

4. Pulse

Cada vez que pulsa

le entrega una carta nueva.

para ver su mano.

Su mano

Modo de juego

, se

BLA

KJACK

Pulse

_ una o dos veces para reproducir el juego “BLACKJACK”

o “ALPHA ATTACK”.

• ”J”, “Q” y “K” cuentan como 10.

• ”A” puede contar como 1 o

como 11.

• Cuando las 2 primeras cartas

sean “A” y una carta de figura

J28

Cada vez que usted pulse

“BLACKJACK” y “ALPHA ATTACK”.

, la visualización cambiará entre

Su apuesta

Sus fichas

BLACKJACK (Veintiuno)

(“J”, “Q” o “K”), su mano será “BLACKJACK”.

Procure que su “mano” (la suma total de los números

correspondientes a sus cartas) sea 21 o se aproxime a este número,

pero sin rebasarlo.

El total de quien

reparte cartas

5. Pulse x para no recibir más

Su total

cartas y quedarse plantado. A

continuación se verá la mano de

quien reparte las cartas y los

resultados.

1. Pulse

una o dos veces

BLA

KJACK

BLACKJACK

para visualizar la pantalla del

modo de juego siguiente.

J28

32K4

2. Pulse

para empezar un

• Cuando usted gane, su total

parpadeará y su apuesta se

doblará.

juego. Las 2 cartas de la

izquierda son para usted. (Una

de ellas descubierta y la otra tapada.)

Su apuesta

Sus fichas

• Cuando usted gane con “BLACKJACK”, su apuesta se triplicará.

3. Acepte la apuesta máxima que se visualiza parpadeando a la

izquierda (un máximo de 10) o introduzca una apuesta inferior.

6. Pulse x y visualice la pantalla del modo de juego.

• El juego terminará cuando usted no tenga más fichas para

apostar.

• Pulse cualquier tecla de modo para abandonar el juego. Sus

fichas quedarán guardadas par la próxima vez.

S-15

yo290s_u1u

02.6.5, 0:20 PM

ALPHA ATTACK

Escriba los caracteres (A a Z) visualizados en la línea del fondo para

borrarlos. El juego se divide en 20 niveles de velocidad.

Cambio de las pilas

Pilas utilizadas

Tipo

Modelo

Cantidad

Uso

1. Pulse

una o dos veces

Pila de litio

CR2032

Funcionamiento de la unidad

ALPH

ATTA

para visualizar la pantalla del

modo de juego siguiente.

Luz de fondo

LEVEL 01

•

Asegúrese de escribir cualquier información importante

almacenada en la memoria antes de cambiar las pilas.

2. Pulse

seleccionar el nivel.

• 01: lento, 20: rápido

3. Pulse para iniciar un

juego.

para

Precauciones

Como el uso inapropiado de las pilas puede producir fugas o

explosión, observe al pie de la letra las instrucciones siguientes:

ALPH

ATTA

•

Si el fluido de una pila que tiene fugas entra por accidente en sus

ojos podrá causarle una grave lesión. Si le ocurre esto, lave sus

ojos con abundante agua limpia y consulte inmediatamente a un

médico.

LEVEL 03

4. Pulse la tecla correspondiente al

primer carácter del extremo

izquierdo de la línea del fondo.

EYK

•

Si el fluido de una pila que tiene fugas entra en contacto con su

piel o ropas, lave inmediatamente la parte afectada con agua

limpia.

(En este caso, pulse las teclas en el orden siguiente: E

W.)

→

Si el Organizador no va a ser utilizado durante un largo periodo

de tiempo, para evitar que se estropee, retire las pilas y guárdelo

en un lugar seguro.

No deje las pilas agotadas dentro del Organizador.

No utilice tipos de pilas diferentes ni pilas parcialmente usadas.

Inserte la pila con su lado positivo (+) posicionado

correctamente.

No arroje nunca las pilas al fuego porque podrán explotar.

Guarde las pilas fuera del alcance de los niños.

Cuando las pilas estén muy descargadas, sáquelas

inmediatamente del Organizador para evitar el riesgo de fugas y

corrosión en el interior del Organizador.

• Al pulsar las teclas correctas en el orden correcto se van

borrando los caracteres.

• Cuando se visualicen 12 caracteres en cada nivel, el juego

continuará a un nivel más rápido (hasta alcanzar el 20).

• El juego terminará cuando no se puedan visualizar más

caracteres. Entonces se visualizará la pantalla del modo de

juego mostrando el nivel con el que finalizó el juego.

• Para abandonar el juego, pulse o cualquier tecla de modo.

•

Debido a que las pilas entregadas con el Organizador han sido

instaladas en fábrica, éstas podrán descargarse antes de transcurrir

el tiempo de duración especificado.

S-16

yo290s_u1u

02.6.5, 0:20 PM

Reemplazo de la pila de funcionamiento

Cambio de las pilas

•

Asegúrese de desconectar la alimentación antes de cambiar las

pilas.

Tiempo de reemplazo de la pila

Reemplace inmediatamente la pila de funcionamiento por otra nueva

•

No pulse

cambio de las pilas.

hasta después de completar el procedimiento de

cuando se visualice “

”. Siga los pasos de la página S-17.

El portapila de la pila de funcionamiento se indica con la

palabra “For OPERATION” debajo de la cubierta del portapila.

Si la pila tiene poca carga, puede que no suene la alarma, o que la

luz de fondo no funcione o funcione durante menos tiempo que el

establecido. El uso continuado del Organizador con una pila que

tiene poca carga puede alterar o borrar el contenido de la memoria.

El contenido de la memoria se puede perder también si la pila se

reemplaza incorrectamente o si no se siguen las instrucciones

siguientes.

1. Pulse o para desconectar la alimentación.

2. Afloje el tornillo (hacia la izquierda) y retire la

cubierta del compartimiento de las pilas

ubicada en la parte posterior de la unidad.

RESET

3. Retire una pila usada con un bolígrafo u otro

objeto similar.

•

No emplee un lápiz mecánico ni un objeto

puntiagudo.

RESET

Precaución:

4. Instale una pila nueva con el lado positivo

(+) hacia arriba.

• PC Link puede que no esté disponible cuando el nivel de carga de la

pila esté bajo.

• El informe de gastos (informe sumario) puede que no esté disponible

cuando el nivel de carga de la pila esté bajo.

5. Repita los pasos 3 y 4 para reemplazar

ambas pilas en caso de ser necesario.

RESET

• Cuando el nivel de carga de la pila esté bajo, puede que en algunos

modos no se puedan introducir datos nuevos ni editar datos

existentes. Y puede que tampoco se puedan realizar ajustes del reloj

u otros ajustes.

6. Vuelva a poner la cubierta del compartimiento

y asegúrela con el tornillo.

7. La alimentación se conectará á 2 a 3 segundos después de pulsar

8. Ajuste el reloj a la hora correcta.

Reemplazo de la pila de la luz de fondo

Cuando la luz de fondo no pueda encenderse (excepto cuando se

Precaución:

• Los ajustes del reloj y/u otros ajustes y listines podrán perderse

cuando las pilas sean retiradas durante mucho tiempo. Reemplace

las pilas lo más rápidamente posible.

visualice “

” o el Organizador esté en el modo PC Link),

cambie la pila. Siga los pasos de la página S-17.

El portapila de la pila de la luz de fondo se indica con la

palabra “For Back Light” debajo de la cubierta del portapila.

• Confirme que todos los ajustes sean los correctos después de

cambiar las pilas.

S-17

yo290s_u1u

02.6.5, 0:20 PM

MEMO

yo290e_u1u

02.6.5, 0:17 PM

MEMO

yo290e_u1u

02.6.5, 0:17 PM

MEMO

yo290e_u1u

02.6.5, 0:17 PM

LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer

purchaser that this Sharp brand product (the “Product”), when shipped

in its original container, will be free from defective workmanship and materials,

and agrees that it will, at its option, either repair the defect or

replace the defective Product or part thereof with a new or remanufactured

equivalent at no charge to the purchaser for parts or labor for the period(s)

set forth below.

be liable, or in any way responsible, for any damages or defects in the

Product which were caused by repairs or attempted repairs performed

by anyone other than an authorized servicer. Nor shall Sharp be liable or

in any way responsible for any incidental or consequential economic or

property damage. Some states do not allow the exclusion of incidental

or consequential damages, so the above exclusion may not apply to you.

This warranty does not apply to any appearance items of the Product nor

to the additional excluded item(s) set forth below nor to any Product the

exterior of which has been damaged or defaced, which has been subjected

to improper voltage or other misuse, abnormal service or handling, or

which has been altered or modified in design or construction.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY

ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Your Product :

Electronic Organizer

Warranty Period for this

Product :

One (1) year parts and labor from date

of purchase.

In order to enforce the rights under this limited warranty, the purchaser

should follow the steps set forth below and provide proof of purchase to

the servicer.

Additional Items Excluded

from Warranty Coverage :

Any consumable items such as paper,

maintenance cartridge, ink cartridges

supplied with the Product or to any

equipment or any hardware, software,

firmware, fluorescent lamp, power cords,

covers, rubber parts, or peripherals other

than the Product.

The limited warranty described herein is in addition to whatever implied

warranties may be granted to purchasers by law. ALL IMPLIED

WARRANTIES

INCLUDING

THE

WARRANTIES

MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE

PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.

Some states do not allow limitations on how long an implied warranty

lasts, so the above limitation may not apply to you.

Where to Obtain Service :

At a Sharp Authorized Servicer located

in the United States. To find out the

location of the nearest Sharp Authorized

Servicer, call Sharp toll free at 1-800-BE-

SHARP.

Neither the sales personnel of the seller nor any other person is authorized

to make any warranties other than those described herein, or to extend

the duration of any warranties beyond the time period described herein

on behalf of Sharp.

The warranties described herein shall be the sole and exclusive warranties

granted by Sharp and shall be the sole and exclusive remedy available

to the purchaser. Correction of defects, in the manner and for the period

of time described herein, shall constitute complete fulfillment of all liabilities

and responsibilities of Sharp to the purchaser with respect to the Product,

and shall constitute full satisfaction of all claims, whether based on

contract, negligence, strict liability or otherwise. In no event shall Sharp

What to do to Obtain Service : Ship (prepaid) or carry in your Product to

a Sharp Authorized Servicer. Be sure to

have proof of purchase available. If you

ship or mail the Product, be sure it is

packaged carefully.

TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.

yo290e_u1u

02.6.5, 0:17 PM

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-1163

PRINTED IN CHINA/IMPRESO EN CHINA

02EGK (TINSE0551EHZZ)

yo290e_u1u

02.6.5, 0:17 PM

Sharp Stereo System SD PX2 User Manual
Shure Headphones SE420 User Manual
Singer Sewing Machine 133W101 User Manual
Sony Blu ray Player BDVN890W User Manual
Sony Digital Camera 3 700 781 611 User Manual
Sony Digital Camera DSC FX77 User Manual
Sony Laptop Docking Station SM4000 User Manual
Sony Portable CD Player MDX CA680 User Manual
Sunbeam Hot Beverage Maker BVSBKTSS01 033 User Manual
Symphonic TV VCR Combo 9 TVCP User Manual