Silvercrest Clock Radio SKRD 30 A1 User Manual

Under-Cabinet Radio SKRD 30 A1

Under-Cabinet Radio

Operating instructions

KOMPERNASS GMBH

BURGSTRASSE 21 · D-44867 BOCHUM

www.kompernass.com

ID-Nr.: SKRD 30 A1-09/10-V3

Index

Programming the kitchen timer . . . .16

Accessing the kitchen timer . . . . . .16

Programming alarm wake times . . .17

Wake with alarm tone . . . . . . . . . .17

Waken with radio. . . . . . . . . . . . . .18

Switching the alarm oﬀ. . . . . . . . . .18

When the wake time has arrived . .18

Radio operation . . . . . . . . . . . . . . .19

Switching the radio on/oﬀ . . . . . . .19

Adjusting the volume. . . . . . . . . . . .19

Manual station selection. . . . . . . . .19

Search for the next station . . . . . . .19

Saving stations manually . . . . . . . .20

Access saved stations . . . . . . . . . .20

Automatic station search

(AMS function) . . . . . . . . . . . . . . .20

Additional functions . . . . . . . . . . . .21

Automatic switch oﬀ (Sleep function) 21

Button lock . . . . . . . . . . . . . . . . . . .21

Bass accentuation. . . . . . . . . . . . . .21

Introduction . . . . . . . . . . . . . . 2

Information for these operating

instructions . . . . . . . . . . . . . . . . . . . . 2

Proper usage . . . . . . . . . . . . . . . . . . 2

Warning notices . . . . . . . . . . . . . . . . 3

Safety . . . . . . . . . . . . . . . . . . . . . . . . 4

Danger from electric shock. . . . . . . . 4

Handling of batteries . . . . . . . . . . . . 4

Basic Safety Instructions . . . . . . . . . . 5

Operating components . . . . . 6

Setting up and connecting . . . 7

Safety instructions . . . . . . . . . . . . . . 7

Package contents and transport

inspection . . . . . . . . . . . . . . . . . . . . . 7

Unpacking . . . . . . . . . . . . . . . . . . . . 7

Disposal of the packaging . . . . . . . . 8

Set-up location requirements. . . . . . . 8

Electrical connection. . . . . . . . . . . . . 8

Inserting the battery . . . . . . . . . . . . . 9

Mounting under a wall cupboard . . 9

Disassembly . . . . . . . . . . . . . . . . . .10

Setting up the device . . . . . . . . . . .10

Providing mains power . . . . . . . . . .10

VHF wire antenna . . . . . . . . . . . . .10

Cleaning . . . . . . . . . . . . . . . .22

Safety instructions . . . . . . . . . . . . .22

Cleaning the housing . . . . . . . . . . .22

Troubleshooting . . . . . . . . . .22

Safety instructions . . . . . . . . . . . . .22

Malfunction causes and remedies .23

Handling and operation . . .11

Storage/Disposal . . . . . . . . .24

Switching On and Oﬀ . . . . . . . . . .11

Basic settings . . . . . . . . . . . . . . . . .11

Activating the settings menu . . . . .11

Setting the time. . . . . . . . . . . . . . . .12

Setting the date . . . . . . . . . . . . . . .12

Adjusting the display brightness. . .13

Setting the memory function . . . . . .13

Setting the time of day format . . . .14

Kitchen timer. . . . . . . . . . . . . . . . . .14

Setting the kitchen timer . . . . . . . . .14

Starting the kitchen timer . . . . . . . .15

Pausing the kitchen timer. . . . . . . . .15

Storage. . . . . . . . . . . . . . . . . . . . . .24

Disposal of the device . . . . . . . . . .24

Disposing of the batteries. . . . . . . .24

Appendix . . . . . . . . . . . . . . .25

Information regarding the

EG conformity declaration . . . . . . .25

Technical data . . . . . . . . . . . . . . . .25

Warranty . . . . . . . . . . . . . . . . . . . .26

Service . . . . . . . . . . . . . . . . . . . . . .26

Importer . . . . . . . . . . . . . . . . . . . . .26

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Introduction

Information for these operating instructions

These operating instructions are a component of the Under-Cabinet Radio

SKRD 30 A1 (henceforth designated as the device) and they provide you with

important information about the intended use, safety, installation and connection

as well as operation of the device.

The operating instructions must be kept available in the vicinity of the device

at all times. They are to be read and used by anyone assigned to service and

repair faults in the device.

Retain these operating instructions and pass them on with the device to any

future owners.

This documentation is copyright protected.

Any copying or reproduction, including as extracts, as well as the reproduction

of images, also in an altered state, is not permitted without the express written

consent of the manufacturer.

Proper usage

This device is only intended for the reception of VHF radio programmes, as a

kitchen timer and as an alarm by means of an alarm tone or radio in enclosed

spaces. The device is intended as a free standing unit or for mounting under a

cupboard. For these purposes the supplied stand and/or mounting plate must be

used. Any other use or uses beyond those mentioned are considered unintended

use. The device is not intended for use in commercial or industrial environments.

WARNING

Danger from unintended use!

Danger from the device can result if it is used for unintended purposes and/or

other types of use.

► Use the device exclusively for intended purposes.

► Observe the procedures described in these operating instructions.

No warranty claims of any kind will be accepted for damage caused by improper

use, unauthorised repairs, unauthorised modiﬁcations or for the use of unapproved

replacement parts.

The operator alone bears liability.

SKRD 30 A1

Introduction

Warning notices

In the current operating instructions the following warning notices are used:

DANGER

A warning in this danger level indicates a hazard threatening

situation.

In the event that the hazardous situation is not avoided it can lead to death

or serious injury.

► The directives in this warning are there in order to avoid the danger of

death or serious injury.

WARNING

A warning of this danger level signiﬁes a possible dangerous

situation.

If the dangerous situation is not avoided it can lead to injuries.

► The directives in this warning are there to avoid personal injuries.

IMPORTANT

A warning of this danger level signiﬁes possible property

damage.

If the situation is not avoided it can lead to property damage.

► The directives in this warning are there to avoid property damage.

NOTICE

► A notice signiﬁes additional information that assists in the handling of the

device.

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Introduction

Safety

In this section you receive important safety information regarding handling of the

device.

This device complies with the statutory safety regulations. Incorrect usage can

lead to injuries and property damage.

Danger from electric shock

DANGER

Risk of fatal electrocution!

A life-threatening situation can arise from contact with live

wires or components!

Observe the following safety instructions to avoid electric shock hazards:

► Do not use the device if the mains power plug or the connection cable are

damaged.

► Do not, under any circumstances, open the device housing. The risk of an

electric shock is present if the power carrying connections are touched or

the electrical or mechanical construction is changed.

Handling of batteries

WARNING

Danger from improper use!

For safe handling of batteries observe the following safety instructions:

► Do not throw batteries into a ﬁre.

► Do not short circuit batteries.

► Do not attempt to recharge batteries.

► Regularly check the condition of the batteries. Leaking battery acid can

cause permanent damage to the device. Special caution should be shown

when handling damaged or leaking batteries. Danger from acid burns!

Wear protective gloves.

► Store batteries in a place inaccessible to children. If swallowed seek

immediate medical attention.

► If you do not intend to use the device for an extended period of time,

remove the batteries.

SKRD 30 A1

Introduction

Basic Safety Instructions

For safe handling of the device observe the following safety instructions:

■ Before use check the device for visible external damage. Do not put into

operation a device that is damaged or has been dropped.

■ Damaged cables or connections should be replaced by authorised qualiﬁed

persons or by the customer service department.

■ Persons who, due to their physical, intellectual or motor abilities, are incapable

of operating the device safely may only use the device under supervision or

direction from a responsible person.

■ Only allow children to use the device under supervision.

■ Repairs should only be carried out by authorized specialist companies or by

the customer service department. Incorrect repairs can result in danger to the

user. In addition warranty claims become void.

■ A repair to the device during the warranty period may only be carried out

by a customer service department authorized by the manufacturer otherwise

no additional warranty claims can be considered for subsequent damages.

■ Defective components may only be replaced with original replacement parts.

Only by using original replacement parts can you guarantee that the safety

requirements are complied with.

■ Protect the device from moisture and liquid penetration. Never submerge the

device in water, do not place the device in the vicinity of water and do not

stand any object ﬁlled with liquid (i.e. vases) on the device.

■ Do not place any objects on the device.

■ Do not operate the device in the vicinity of open ﬂames (i.e. candles).

■ Avoid direct sunlight.

■ Always pull on the power plug when disconnecting from the wall socket,

never pull on the connection cable.

■ If malfunctions occur or thunder storms threaten pull the power plug from the

wall socket.

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Operating components

(for illustrations see fold out sides ﬁgure A)

Mounting plate/Stand

Control panel

Display

On/Oﬀ: On/Oﬀ switch (Radio)

AOT: Timer switch oﬀ

Lock/Mem.: Button lock/memory slot selection

Bass/AMS/Mode: Bass accentuation/Station search/Access setting menu

Alarm 1: Alarm 1 programming

Alarm 2: Alarm 2 programming

Preset–: selection of the previous memory slot

Preset+: selection of the next memory slot

Tune–: Decrease the reception frequency

13 Tune+: Increase the reception frequency

14 VOLUME/Snooze/Timer: Volume control/Alarm switch oﬀ/Timer setting

15 Wire antenna for VHF reception

16 Mains connection cable

17 Recesses for stand

18 Speakers

19 Battery compartment

20 Unlocking buttons for the mounting plate

SKRD 30 A1

Setting up and connecting

Safety instructions

WARNING

Damage may occur to property and injuries to people when

operating the device!

Observe the following safety instructions to avoid dangers:

► Packaging material should not be used as a play thing. There is a risk of

suﬀocation!

► To avoid risks to persons and property, observe the requirements for the

set-up location and the electrical connections.

Package contents and transport inspection

The device is delivered with the following components as standard:

▯ Under-Cabinet Radio SKRD 30 A1

▯ Mounting plate/Stand

▯ 4 Securing screws

▯ 1 x Battery 3 V Type CR2032

▯ Operating instructions

NOTICE

► Check the contents to make sure everything is there and for visible damage.

► If the items supplied are incomplete, or damaged due to defective packaging

or transportation, contact the Service Hotline (see section Service).

Unpacking

♦

Remove all device parts and the operating instructions from the carton.

♦

Remove all packing material.

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Setting up and connecting

Disposal of the packaging

The packaging protects the device from transport damage. The packaging ma-

terials are selected from the point of view of their environmental friendliness and

disposal technology and are therefore recyclable.

The recirculation of packaging into the material circuit saves on raw material

and reduces generated waste. Dispose of packaging material that is no longer

needed according to the regionally established regulations.

NOTICE

► If possible preserve the device's original packaging during the warranty

period so that in the case of a warranty claim you can package the device

properly for return.

Set-up location requirements

For the safe and fault free operation of the device, the set-up location must fulﬁll

the following conditions:

■ When setting up the device place it on a ﬁrm, ﬂat and even surface. Use the

supplied stand.

■ Set up or mount the device in such a way that the available ventilation open-

ings and the speaker are not covered.

■ Do not operate the device in a hot, wet or very humid location or in the vicin-

ity of ﬂammable materials.

■ The surfaces of furniture may contain components that could aﬀect and sof-

ten the rubber feet on the device. If necessary, place an anti-slip mat under

the rubber feet of the device.

■ The wall socket must be easily accessible so that, in an emergency, the plug

can be quickly withdrawn from the socket.

Electrical connection

■ Before connecting the device, compare the connection data (voltage and

frequency) on the rating plate of the device with that of your power supply

network. This data must be compatible to avoid possible damage to the device.

■ Make sure that the device's connection cable is not damaged and is not

laying over hot surfaces and/or sharp edges.

■ Make sure that the connection cable is not tightly stretched or bent.

■ Do not allow the connection cord to hang over edges (Trip wire eﬀect).

SKRD 30 A1

Setting up and connecting

Inserting the battery

By inserting the battery you can avoid the loss of programmed time of day and

alarm times in the event of a possible power outage. The battery ensures that

the internal clock continues to run even during a power failure. When power is

restored the correct time appears automatically in the display

NOTICE

► The device can also be operated without a battery.

♦

Open the cover of the battery compartment 19 on the underside of the

device by turning the cover to the left, with a coin, as far as it will go and

then lift oﬀ.

♦

Insert the battery type CR2032 (supplied) into the battery compartment.

The side with the marking + points upwards.

Close the battery compartment by attaching the cover and then with a coin

turn it to the right.

Mounting under a wall cupboard

(Illustration see fold out side ﬁgure B)

With the supplied mounting plate

you can mount the device under, for exam-

ple, a wall cupboard. For mounting of the device proceed as follows:

♦

Press both unlocking buttons 20 on the rear panel of the device downwards

thereby, at the same time, sliding the mounting plate backwards and

remove the mounting plate

♦

Find a suitable set-up location for the device (see also the section

Requirements for the set-up location).

Hold the mounting plate

edge of the mounting plate

under the set-up location. Thereby the front

should be approx. 4 cm behind the front of

the cupboard so that, after Remove the mounting, the device is ﬂush with the

cupboard.

♦

Mark the 4 fastening points with a pencil.

Using a spike or nail, make a small depression at the respective marking

points. Screw the mounting plate

illustrated in ﬁgure B.

tightly with the supplied screws as

♦

Place the device aslant, with the front recesses in the top face, in the mount-

ing plate . Press the rear part of the device upwards against the mounting

plate

until the device audibly locks into place.

Check to make sure that the device is secure.

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Setting up and connecting

Disassembly

♦

Press both unlocking buttons 20 on the rear panel of the device downwards,

thereby sliding, at the same time, the device forward and then remove the

device downwards.

♦

Unscrew the screws on the mounting plate

plate

and remove the mounting

Setting up the device

As an alternative you can stand the device on a top. So as not to cover up the

ventilation slots and the speaker 18 on the underside of the device, when setting

up the device it must be mounted on the stand . For assembly of the stand

proceed as follows:

♦

Press both unlocking buttons 20 on the rear panel of the device downwards

thereby, at the same time, sliding the mounting plate backwards and remove

the mounting plate . The mounting plate can now be used as a stand.

♦

Slide both front retaining tabs of the stand

the underside of the device.

into the rear recesses 17 on

Press both rear retaining tabs of the stand

the underside of the device until the stand audibly locks into place.

into the front recesses 17 on

Find a suitable set-up location for the device (see also the section

Requirements for the set-up location).

Providing mains power

♦

Insert the mains connection cable 16 power plug into a socket. The time of

day will be shown in the display

(0:00 o'clock).

VHF wire antenna

♦

Unwind the wire antenna 15 completely for VHF reception.

SKRD 30 A1

Handling and operation

In this section you receive important information for the handling and operation

of the device.

Switching On and Oﬀ

After the device has been connected to the power supply it is already switched

on. Via the On/Oﬀ

button you switch between the operational modes clock/

standby operation and radio.

NOTICE

► The On/Oﬀ switch

does not disconnect the device completely from the

mains power. To completely disconnect the device from the mains power

the mains power cable plug 16 must be pulled from the mains socket.

Basic settings

After the device has been connected to the mains power supply it shows the time

of day and the day of the week in the display . The device is in the operational

mode clock/standby operation.

Activating the settings menu

To activate the settings menu, whilst in the operational mode clock/standby operation,

press the Bass/AMS/Mode

button. The time of day, shown in the display

begins to blink. Each further actuation of the Bass/AMS/Mode

to the next setting potential. The menu item sequence is:

button switches

▯ Setting the time of day

▯ Setting the date

▯ Adjusting the display brightness

▯ Setting the memory function

▯ Setting the time of day format

NOTICE

► The setting menu ends automatically if you do not actuate any buttons for

approx. 15 seconds. The executed setting is saved.

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Handling and operation

Setting the time

Prerequisite: The device is in the operational mode clock/standby operation.

♦

Press the Bass/AMS/Mode

begins to blink.

button once. The time of day indicator

♦

Set with the buttons Tune+ 13 and Tune–

the current time of day. With

each button press the time of day changes by one minute. Holding down

the respective button for more than 2 seconds starts the speed setting.

♦

Press the Bass/AMS/Mode

move to the next menu item.

button again to save the current setting and

NOTICE

► The time of day will revert back to 00:00 o'clock if the device is disconnected

from the mains power supply and no battery is inserted or if the battery is too

weak.

Setting the date

Prerequisite: The device is in the operational mode clock/standby operation.

♦

Press the Bass/AMS/Mode

blink.

button twice. The date indicator begins to

♦

Set with the buttons Tune+ 13 and Tune–

the current date. With each

button press the date is changed by one day. The weekday indicator changes

automatically. Holding down the respective button for more than 2 seconds

starts the speed setting.

♦

Press the Bass/AMS/Mode

move to the next menu item.

button again to save the current setting and

NOTICE

► The date will revert back to 01.01.2010: if the device is disconnected from

the mains power supply and no battery is inserted or if the battery is too weak.

SKRD 30 A1

Handling and operation

Adjusting the display brightness

Prerequisite: The device is in the operational mode clock/standby operation.

♦

Press the Bass/AMS/Mode

button three times. The current setting for the

display brightness is shown (H=bright or L=dim).

Set, with the button Tune+ 13, the display brightness to Hif you want the

display to be brighter.

Set, with the button Tune– , the display brightness to Lif you want the

display to be darker.

Press the Bass/AMS/Mode

move to the next menu item.

button again to save the current setting and

Setting the memory function

You can set up to 10 date reminders to which an automatic reminder will be

triggered. The function SdA (SdA=Special Day Alert) is useful as a reminder, for

example, of birthdays or other recurring events. The reminder occurs every year

on the same date.

Prerequisite: The device is in the operational mode clock/standby operation.

♦

Press the Bass/AMS/Mode

button four times. The current setting of the

selected reminder date is shown alternating with the indicator SDA. Next to

the indicator SDAis the number of the memory slot for that date. Possible

reminders are SDA 0 to SDA 0.

♦

Select with the buttons Preset+

date to be set.

and Preset–

the memory slot for the

Set with the buttons Tune+ 13 and Tune–

the date for this memory slot.

With each button press the date is changed by one day. Holding down the

respective button for more than 2 seconds starts the speed setting.

NOTICE

► Press the button AOT 5 if you want to switch oﬀ the reminder function

for the currently selected memory slot. In the display ----is shown.

♦

Press the button Lock/Mem.

function is to be triggered. The setting is carried out with the buttons Tune+ 13

to set the time of day at which the reminder

and Tune–

on the hour between 00 and 23. This setting applies to all

programmed reminder dates

Press the Bass/AMS/Mode

move to the next menu item.

button again to save the current setting and

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Handling and operation

Setting the time of day format

Prerequisite: The device is in the operational mode clock/standby operation.

♦

Press the Bass/AMS/Mode

button ﬁve times. The current setting for the

time of day format is shown (24=24 hour format or 12=12 hour format).

With the button Tune+ 13 set the time of day format to 24if you want a

time of day display in the 24 hour format .

With the button Tune–

set the time of day format to 12if you want a

time of day display in the 12 hour format .

Press the Bass/AMS/Mode

move to the next menu item.

button again to save the current setting and

Kitchen timer

The device has a convenient kitchen timer with which, for example, cooking and

baking times can be monitored. The programmable time range of the kitchen

timer lies between 1 minute and 23 hours, 59 minutes.

Setting the kitchen timer

♦

Press the Snooze/Timer 14 button. The display shows 0000. In the right

upper corner of the display the saucepan symbol for the kitchen timer is

superimposed.

♦

Turn the VOLUME 14 knob to set the time range for the kitchen timer.

Turning in a clockwise direction increases the time; turning in a counter

clockwise direction reduces the time.

NOTICE

► If, during the setting, approx. 15 seconds passes without any changes

taking place the device reverts back to the previous operational mode.

SKRD 30 A1

Handling and operation

Starting the kitchen timer

♦

After setting the time press the button Snooze/Timer 14 again. The displayed

time begins to run backwards. In the right, upper corner of the display a

backwards running clock is superimposed.

NOTICE

► If, during the operation of the kitchen timer, another function is selected

the display of the remaining time fades out. The saucepan symbol and the

backward running clock in the right, upper corner of the display, however,

continue to be shown. Press the button Snooze/Timer 14 again to allow

the remaining time of the kitchen timer to be shown once more.

30 seconds before the kitchen timer run time has expired the device begins to

acoustically indicate, with individual signal tones, the arrival of the set time. Thereby

the interval between the individual tones becomes shorter and shorter. When the

set time has arrived the kitchen timer's alarm signal sounds as a continuous tone.

♦

Press the button Snooze/Timer 14 to switch oﬀ the kitchen timer alarm signal.

Pausing the kitchen timer.

♦

Press, while the kitchen timer is running, the button Snooze/Timer 14. The

kitchen timer is paused. The displayed remaining time begins to blink.

NOTICE

► After approx. 15 seconds the device reverts back to the previous operational

mode. Press the button Snooze/Timer 14 again to allow the remaining time

of the kitchen timer to be shown once more.

♦

To restart the kitchen timer press the button Snooze/Timer 14 again. The

kitchen timer restarts.

♦

To switch oﬀ the kitchen timer before the set time has expired press and hold

down the Snooze/Timer 14 button for at least 2 seconds.

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Handling and operation

Programming the kitchen timer

You can preprogramme the kitchen timer with the most frequently used times so

that it is not necessary to continually reenter them. Up to 10 times can be prepro-

grammed. All 10 memory slots are preprogrammed with 10 minutes as standard.

For the programming of the kitchen timer proceed as follows:

♦

Press the button Snooze/Timer 14 to activate the kitchen timer.

Turn the VOLUME 14 knob to set the time to be programmed. Turning in a

clockwise direction increases the time; turning in a counter clockwise direc-

tion reduces the time.

♦

Press the button Lock/Mem.

to activate the timer selection. Under the

kitchen timer saucepan symbol a blinking T is shown.

a memory slot between

Select with the buttons Preset+

T0and T9for the timer that is to be set.

and Preset–

Press the button Lock/Mem.

again to programme the set time on the

selected memory slot. The blinking T under the saucepan symbol is now show-

ing constantly.

♦

Repeat the process for the other memory slots.

Accessing the kitchen timer

To access a programmed time for the kitchen timer proceed as follows:

♦

Press the button Snooze/Timer 14 to activate the kitchen timer.

the desired timer between

Select with the buttons Preset+

and Preset–

T0and T9.

♦

Press the button Snooze/Timer 14 again to start the kitchen timer.

SKRD 30 A1

Handling and operation

Programming alarm wake times

The device has two alarms available. All settings for both alarms can be carried

out independently from each other. You can select whether at the programmed

time an alarm tone shall sound or the radio shall play.

NOTICE

► If, during alarm wake programming, no button is pressed for approx.

15 seconds the alarm will activate with the current settings.

Prerequisite: The device is in the operational mode clock/standby operation.

To set the wake time proceed as follows:

♦

Press the Alarm1 button

or the Alarm2 button . The set wake time

of the respective alarm is shown blinking in the display

and the indicator

A1 and/or A2appears. The weekday on which this alarm is to be activated

is shown above the time indicator.

the desired wake time. With

each button press the wake time changes by one minute. Holding down the

respective button for more than 2 seconds starts the speed setting.

♦

Set with the buttons Tune+ 13 and Tune–

Press the button AOT 5 to switch between the weekday combinations Mo-Fr,

Sa-Su or Mo-Su. The respective selected combination is shown above the

wake time.

Press and hold down the button AOT 5 for at least 2 seconds to switch

between the weekday combinations and individual weekday setting alterna-

tives.

NOTICE

► With the individual weekday setting alternative you switch between

the days of the week with the button AOT 5 .

Wake with alarm tone

Prerequisite: The device is in the operational mode clock/standby operation.

♦

To select "Alarm tone" for the respective alarm press the Alarm1 button

or the Alarm2 button

several times in succession until, in the display

the symbol

appears.

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Handling and operation

Waken with radio

If you want to be woken by the radio, before activating the wake time carry out

the following settings:

♦

Switch the radio on by pressing the On/Oﬀ

button.

Select the station with which you want to be woken (see section

Station setting).

♦

With the VOLUME 14 knob set the desired volume (see section

Volume settings).

♦

Switch the radio oﬀ by pressing the On/Oﬀ

button.

To select "Radio" for the respective alarm press the Alarm1 button

or the

Alarm2 button

several times in succession until, in the display , the

symbol

appears.

Switching the alarm oﬀ

Prerequisite: The device is in the operational mode clock/standby operation.

♦

To switch oﬀ the respective alarm press the Alarm1 button

or the Alarm2

button

several times in succession until no symbols are shown in the

display

When the wake time has arrived

With the setting "Wake with alarm tone" a fourfold signal tone sounds in

intervals of 2 seconds. The volume of the signal tone will continually increase

until the maximum volume has been reached. The duration of the wake signal is

restricted to 10 minutes.

With the setting "Wake with radio" the radio will switch on. The previously

selected station will be activated for a maximum of 60 minutes at the set volume.

♦

Press the button Snooze/Timer 14 to activate a repeat wake after 9 minutes.

NOTICE

► The repeat wake function is possible up to 60 minutes after the set wake

time has arrived.

♦

Press the Alarm1 button

alarm.

or the Alarm2 button

to end the current

NOTICE

► The alarm becomes active again when the next wake time has arrived

(i.e. on the next day).

SKRD 30 A1

Handling and operation

Radio operation

NOTICE

► For a good radio reception the wire antenna 15 must be completely un-

coiled. Adjust the antenna, whilst in radio operation, to the best reception.

► The technical factors of the device allow for tuning reception frequencies

outside of the permitted VHF (FM) range of 87.5–108 MHz. In some

countries, diﬀerent national regulations may apply to the assigned radio

frequency ranges.

Please note that information received outside of the assigned radio

frequency ranges may not be exploited, passed on to third parties or

otherwise misused.

Switching the radio on/oﬀ

♦

Switch the radio on by pressing the On/Oﬀ

button.The display

shows the current reception frequency of the tuned station.

♦

Switch the radio oﬀ by pressing the On/Oﬀ

button again.The device

changes back to the operational mode clock/standby operation. The cur-

rent time of day is shown.

Adjusting the volume.

♦

With the VOLUME 14 knob set the desired volume. Turning in a clockwise

direction increases the volume; turning in a counter clockwise direction

reduces the volume. The volume level is shown on the left border of the

display

Manual station selection

♦

By a single press on the buttons Tune+ 13 and Tune–

tune the desired

station. The frequency of the station is shown in the display . During the

tuning the speaker is switched oﬀ.

Search for the next station

The device can automatically search for the nearest station.

for at least two seconds.

♦

Press and hold down the button Tune+ 13 or Tune-

The device searches for the nearest station with suﬃcient reception quality.

♦

Repeat this process until you have found the station you are looking for.

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Handling and operation

Saving stations manually

Prerequisite: The device is in the radio operational mode.

The device has 30 memory slots available for station frequencies. To save a station

frequency proceed as follows:

♦

Tune, as described previously, the desired station.

Press the button Lock/Mem.

once. The symbol MEM begins to blink in

the lower, right corner of the display.

the desired memory slot

♦

Select with the buttons Preset+

and Preset–

for the tuned station between 1and 30.

Press the button Lock/Mem.

again. The reception frequency of the tuned

station is saved on the selected memory slot. The symbol MEM lights up

constantly.

Access saved stations

Prerequisite: The device is in the radio operational mode.

the desired memory slot

♦

Select with the buttons Preset+

and Preset–

for the saved station between 1and 30.

Automatic station search (AMS function)

Prerequisite: The device is in the radio operational mode.

To allocate the memory slots to the station frequencies with the strongest receiv-

able stations a station search can be carried out.

NOTICE

► With the carrying out of the following described function all previously

saved stations will be lost.

♦

Press and hold down the button Bass/AMS/Mode

for at least two

seconds. The device begins the station search and allocates to the memory

slots 1-30 the found stations.

NOTICE

► If more than 30 stations are found only the ﬁrst 30 reception frequencies

will be saved.

► If less than 30 stations are found the last memory slots remain unchanged.

SKRD 30 A1

Handling and operation

Additional functions

Automatic switch oﬀ (Sleep function)

With the sleep function the radio switches itself oﬀ after a time lapse of between

5 and 120 minutes.

♦

To access the function press the button AOT 5 . The current remaining time

until the radio switches itself oﬀ is shown.

♦

Press the button AOT 5 repeatedly to set the desired time. Holding down

the button for more than 2 seconds starts the speed setting.

NOTICE

► The setable time frame lasts from 120 to 5 minutes. The setting takes place

in stages of 5 minutes. After which the indicator OFFappears. With the

indicator OFF the sleep function is switched oﬀ.

Button lock

You can lock the buttons of the device so that settings cannot be altered by

unauthorised people or children.

♦

Press and hold down the button Lock/Mem.

switch the button lock on or oﬀ. When the button lock is switched on the

symbol appears in the display.

for at least two seconds to

Bass accentuation

With the bass accentuation you can switch on an enhanced playback of the low

frequencies.

Prerequisite: The device is in the radio operational mode.

♦

Press brieﬂy the button Bass/AMS/Mode

to switch the bass accentuation

on or oﬀ. With the bass accentuation switched on the symbol BASS appears

in the display.

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Cleaning/Troubleshooting

Cleaning

Safety instructions

DANGER

Life-threatening situation from electric shock!

► Remove the plug from the mains power socket before cleaning.

IMPORTANT

Damaging of the device!

► Make sure when you are cleaning the device that no moisture gets inside

in order to avoid irreparable damage to it.

Cleaning the housing

■ Clean the surfaces of the device with a soft, dry cloth.

Troubleshooting

In this section you receive important information for the localization and remedying

of malfunctions. Observe the instructions in order to avoid danger and damage.

Safety instructions

WARNING

Observe the following safety information to avoid danger and property

damage:

► Repairs to electronic devices may only be carried out by specialists who

have been trained by the manufacturer. Considerable danger to the con-

sumer and damage to the device can occur as a result of incorrect repairs.

SKRD 30 A1

Troubleshooting

Malfunction causes and remedies

The following table will help with localizing and remedying minor malfunctions:

Defect

Possible cause

Solution

Insert the plug into the

mains power socket.

The plug is not inserted.

The display is

showing nothing.

Mains power socket is

not supplying power.

Check the circuit fuse.

The volume is set to

minimum.

Increase the volume with the

VOLUME 14 knob.

No sound

Switch the radio on with the

The radio is switched oﬀ.

On/Oﬀ

button.

The radio station is not

properly tuned in.

Tune the station correctly with the

buttons Tune+ 13 and Tune–

Noisy radio

reception

Try to improve reception by moving

the wire antenna 15.

Reception is too weak.

NOTICE

► If you cannot solve the problem with the aforementioned methods, please

contact Customer Service.

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Storage/Disposal

Storage

If you do not intend to use the device for an extended period of time, disconnect

it from the mains power supply, remove the battery and store it at a clean, dry

location that is not subjected to direct sunlight.

Disposal of the device

Do not dispose of the device in your normal domestic waste.

This product is subject to the European directive 2002/96/EC-WEEE

(Waste Electrical and Electronic Equipment).

Dispose of the device through an approved disposal centre or at your community

waste facility. Observe the currently applicable regulations. In case of doubt,

please contact your waste disposal centre.

Disposing of the batteries

Batteries must not be disposed of in the household waste. Every consumer is

legally obligated to hand in batteries at a collection centre in his/her commu-

nity/district or a dealer. This obligation is intended to ensure that batteries are

disposed of in an environmentally friendly manner. Hand batteries in only when

they are fully discharged.

SKRD 30 A1

Appendix

Information regarding the EG conformity declaration

This device complies regarding conformance to the basic

requirements and other relevant regulations of the European

directive for electromagnetic compatibility 2004/108/EC,

the low voltage directive 2006/95/EC as well as the Eco-

design directive 2009/125/EC (Supplement 1275/2008

Appendix II, Nr.1)

The complete original declaration of conformity can be

obtained from the importer.

Technical data

Operational voltage

220-240 V / 50 Hz

1 x 3 V Type CR2032

(supplied)

Battery for data retention

Power consumption

Operation

approx. 5

approx. 1.8

approx. 1W

Standby

Speaker power output:

(with 10 % harmonic distortion)

Radio frequency range (VHF)

Operating temperature

87.5 - 108 MHz

+5 - +40

5 - 90

°C

Humidity (no condensation)

Measurements (H x W x D):

(without stand)

4.9 x 22 x 12

Weight

approx. 600

Protection class

SKRD 30 A_D1_{ownload from Www.Somanuals.com. All Manuals Search And Download.}

Appendix

Warranty

With this device you receive a 3 year warranty from the date of purchase. The

device has been manufactured with care and meticulously examined before

delivery.

Please retain your receipt as proof of purchase. In the case of a warranty claim,

please get in touch, by telephone, with our service department. Only in this way

can a post-free dispatch for your goods be assured.

NOTICE

► The warranty adjustment is valid only for material or manufacturing defects

not, however, for transport damage, wear and tear or for damage to break-

able parts, i.e. switches or rechargeable batteries.

The device is intended solely for private, non-commercial use. If this product has

been subjected to improper or inappropriate handling, abuse, or modiﬁcations

not carried out by one of our authorised sales and service outlets, the warranty

becomes void.

Your statutory rights are not restricted in any way by this warranty. The warranty

period will not be extended as a result of warranty adjustments. This applies also

to replacement and repaired parts.

Possible damage and/or faults present at the time of purchase must be reported

immediately after unpacking or, at the very latest, within two days after the

purchase date.

After expiry of the warranty period incidental repairs are subject to payment.

Service

DES UK LTD

Tel.: 0871 5000 700 (£ 0.10 / minute)

E-Mail: [email protected]

Kompernass Service Ireland

Tel: 1850 930 412 (0,082 EUR/Min.)

Standard call rates apply. Mobile operators may vary.

E-Mail: [email protected]

Importer

KOMPERNASS GMBH

BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com

SKRD 30 A1

Sharp All in One Printer TINSE4796FCZZ User Manual
Sherwood Stereo Receiver RX 772 User Manual
Snapper Edger ET302B User Manual
Sony Camera Accessories FATC1AM User Manual
Sony DVD VCR Combo J H1 User Manual
Sony Headphones MRD IF240RK User Manual
Sony MP3 Player A AY7 100 111 User Manual
SPX Cooling Technologies Fan 03 11A User Manual
Sunbeam Mixer 2395 User Manual
Tandberg Data Network Card DLT4000 User Manual