Premier Series
IW-LCR7
SNELL’S 3rd GENERATION IN-WALL LCR, A ZERO COMPROMISE
MUSIC AND THEATER MONITOR.
In 1990, Snell built the world’s first fully enclosed in-wall LCR. Like better
freestanding monitor’s it had accurate, predictable bass, pinpoint imaging,
detail, and startling dynamics. Unlike all open-backed in-walls it minimized
sound leakage to adjacent rooms, and was a very competent alternative to
bulky, obtrusive in-room speakers… and it smoked! Two generations later,
Snell’s chief engineer, Joe D’Appolito reconfigured the 800 Series to feature
his famous D’Appolito Array. The Snell IW-LCR7 borrows the 5 1/4
D’AppolitoArray from its in-room brother, the LCR7, which includes two very
long ex-cursion woofers mounted over and under a low resonance 1-inch
silk dome tweeter. The result is a design that aligns the output from all three
drivers to a single point, for remarkable clarity and soundstage. Other
features include Snell’s three-layer baffle for reduced wall resonance, and
high order crossover for reliable hi-output use. Like all Snell speakers the IW-
LCR7 is hand-tuned to match its reference master by .5dB.
Application Alternatives:
System Suggestions:
Dimensions:
Finish
Dimensions:
Rough
23 1/4” High
13 1/4” Wide
3 3/4” Deep
22” High
12” Wide
OH-LCR7
In-Ceiling
IW BASIS 300
Subwoofer
IW SR30 Surround
LCR7 In Room
IC-LCR7 In Cabinet
Like all Snell loudspeakers, each IW-LCR7 is hand tuned for natural imaging and sonic depth.
Design:
Woofer
Connections
Grille
Infinite Baffle, Back-Boxed,
“D’Appolito” In-Wall LCR
Frequency Response
70Hz-20kHz +3dB
Sensitivity
[1 Watt (2.83v) @ 1m] 89 dB
Impedance
Nominal 4 Ohms
Maximum Output
110 dB
Two 5.25-inch copolymer cone
5mm excursion
Crossover Frequency
2.0 kHz
Spring loaded gold-plated
terminals, accepts pins,
banana plugs and bare wire to
12 gauge.
Cabinet Construction
Enclosure – Solid aluminum
cabinet with full bracing and
asphalt damping. Baffle –
QuietBoxTechnology™ Hi-loss
damping adhesive
sandwiching two layers of 1/4-
inch MDF. Mounting system –
Eight "dog-leg" clamps for
mounting surfaces 1/2 to 1 1/2-
inch thick.
Perforated steel with white
powder coat paint.
Finishes
Crossover
Paintable white finish.
Can be ordered in most
paint finishes.
Weight
Discrete tweeter, and woofer
circuits. Time alignment and
coherency are achieved
through the transition region
from driver to driver. Each
crossover is individually tuned
by our technicians to ± 0.5db of
the Master Reference.
19 lbs.
Recommended Power
50 Watts Minimum
250 Watts Maximum
Tweeter
1-inch SEAS silk dome
Manufactured in the USA by Snell Acoustics, Peabody MA 01960 • www.snellacoustics.com • 978-538-6262 • © Snell Acoustics, Inc • All specifications subject to change without notice.
|