Sony Cell Phone W700i User Manual

To write and send a text message

1 } Messaging } Write new } Text

message.

Text messaging (SMS)

Text messages can contain simple

pictures, animations, melodies and

sound effects.

2 Write your message } Continue. If you

want to save the message for later,

press

. } Yes to save it in Drafts.

3 } Enter phone no. and enter the

recipient’s phone number, or } Contacts

look-up to retrieve a number or a group

from Contacts. To enter an email

address } Enter email addr. A list

below the send options shows the last

used recipients. You can also select

a recipient from this list. } Send.

If you send a text message to a group,

you are charged for each member of that

group.

Before you start

First make sure that the number of

your service centre is set. The number

is supplied by your service provider

and is usually saved on the SIM card.

To send a message to an email address,

you need to set an email gateway

number, } Messaging } Settings } Text

message } Email gateway. The number

is supplied by your service provider.

To set the service centre number

1 } Messaging } Settings } Text

message } Service centre. If the

service centre number is saved on

the SIM card, it is shown in the list.

2 If there is no number in the list } Add

and enter the number, including the

international “+” sign and country

code } Save.

To insert an item in a text message

1 While writing your message } More

} Add item.

2 Select an item type and then select an

item.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

Receiving text messages

} Yes to read the text message or } No

if you want to read the message later.

To save or delete several messages

1 } Messaging and select a folder.

2 Select a message } More } Mark

several.

3 Scroll and select more messages

by pressing Mark or Unmark.

4 } More } Save messages or } More

} Delete messages.

When you have read the text

message } More to view a list of

options. Press

message.

to close the text

To call a number in a text message

Select the phone number } Call.

To delete a message

1 } Messaging and select a folder.

2 Select the message that you want to

Saving and deleting text messages

Text messages are saved in the phone

memory. When the phone memory is

full, you must delete messages or

move them to the SIM card to be able

to receive new messages. Messages

that you have saved on the SIM card

remain there until you delete them.

delete and press

Long messages

The number of characters that a text

message can contain depends on the

language you are writing in. You can

send a longer message by linking two

or more messages. You are charged

for each of the messages linked in a

long message. You may not receive all

parts of a long message at the same

time.

To save a message to the SIM card

} Messaging } Inbox } More } Save

message } Saved messages.

To save an item from a text message

1 Select the phone number, Web

address, picture or sound that you

want to save in the message } More.

2 If you have selected to save a phone

number } Use } Save number. If you

have selected a Web address } Save

bookmark, a picture } Save picture,

a melody } Save sound.

Check with your service provider for the

maximum number of messages that can

be linked.

To turn long messages on

} Messaging } Settings } Text

message } Max. msg length } Max.

available.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

Templates

To check the delivery status of a sent

message

} Messaging } Sent messages and

select a text message } View } More

} Details.

If you have messages that you send

often, you can save these as templates.

You can create your own templates.

To create a template

1 } Messaging } Templates

} New template } Add } Text.

2 Write the message } OK.

3 Enter a title for the message } OK.

Picture messages (MMS)

Picture messages can contain text,

pictures, video clips, camera pictures,

sound recordings, and business cards.

You must have a subscription that

supports picture messaging, and the

receiver of the picture message must

also have support for picture

Message options

You can set a default value for several

message options or choose the settings

each time you send a message.

messaging. You can send picture

messages to a mobile phone or an

email address.

To set a default text message option

} Messaging } Settings } Text

message and select an option.

Before you start

Before sending a picture message,

make sure that:

To set a message option for a

specific message

1 The address of your message server is

set } Messaging } Settings } Picture

message } Message server.

1 When you have selected a recipient

to send your text message to } More

} Advanced.

2 You have entered the correct settings

} Messaging } Settings } Picture

message } Internet profile. If no

Internet profile exists } New profile

and enter the required settings. You

can also automatically receive all the

settings in a message from your

network operator or from

2 Select the option that you want to

change } Edit and select a new

setting.

3 } Done when you have changed the

options.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

Creating and sending picture

messages

To make a call while creating a

picture message

When composing a picture message,

you can select different items such as:

Picture, Text, Sound, Video, Sound

recording and Signature. You can

also select Use camera to take a new

picture or record a new video clip.

1 While writing your message } More.

2 } Make a call and enter or retrieve a

phone number } Call. You return to

the message.

3 To end the call } More } End call.

To set a default message option

} Messaging } Settings } Picture

message and select one of the

options.

Before sending a picture message,

you can select from different options

to adjust and enhance your message.

To create and send a picture

message

Additional send options

You can request a read report, a

delivery report and set a priority for a

specific message. You can also add

more recipients to the message.

1 } Messaging } Write new } Picture

msg } Add to view a list of items to

add to your message. Select an item.

2 } Add to add more items to the

message. You can view and select

options to enhance the message by

highlighting items in the message and

pressing the left selection key.

To select additional send options

1 When you have entered the recipient’s

phone number } More.

2 Select Add recipient or Edit recipients

to add more recipients, Add

3 When you have finished composing

your message } More } Send.

attachment, or Advanced to select

additional send options.

4 } Enter phone no. and enter the

recipient’s phone number, or } Contacts

look-up to retrieve a number or a group

from Contacts. To enter an email

address } Enter email addr. A list

below shows the last 10 recipients.

You can also select a recipient from

this list. } Send.

Receiving picture messages

When you receive an automatically

downloaded picture message, a

message alert sounds.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

} Yes to read or play the message.

} Stop to stop the message. When

you have read the message, select

Reply to reply immediately or select

More to view a list of options. Press

to close the message.

To use a template for a picture

message

1 } Messaging } Templates and select

a template.

2 } Use } Add to add new items.

3 } More } Send to send the message.

You can select a message from the list of

Automatic download

You can select how you want your

picture messages to be downloaded.

messages and press

entire message.

to delete the

To save items from a picture

message

When you have viewed a picture

message } More } Save items and

select an item from the list that

appears.

} Messaging } Settings } Picture

message } Auto download to view

the following:

• Always – your phone automatically

downloads messages to your phone

as soon as they come to your network

operator’s server. This is default.

• Ask in roaming – you will be asked if

you want to download messages sent

from a network other than your home

network.

• Not in roaming – the messages are

never downloaded when they are sent

from a network other than your home

network.

Delete picture messages

Picture messages are saved in the

phone memory. When the phone

memory is full, you must delete

messages to be able to receive new

messages, % 37 Saving and deleting

text messages.

Templates

You can base your message on one of

the templates. You can also add new

templates.

• Always ask – you will always be asked

if you want to download messages,

regardless of network used.

• Off – new messages appear in the

inbox as icons. Select the message

} View to download.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

Receiving voice messages

When you receive a voice message,

a message alert sounds and you are

asked if you want to play the

message.

Voice messages

Voice messages offer a quick way to

send and receive sound recordings as

messages. A voice message can only

contain one sound recording. To send

voice messages, you must have a

subscription that supports picture

messaging, and the receiver of the

voice message must also have

Select Yes to listen to the voice

message at once or select No if you

want to listen to the message later.

When you have listened to the voice

message } More to view a list of

support for picture messaging.

options. Press

message.

to close the

To record and send a voice message

1 } Messaging } Write new } Voice

message. The sound recorder starts.

2 Record your message. } Stop to end

the recording.

3 } Send to send the message.

4 } Enter phone no. and enter the

phone number of the recipient, or

} Contacts look-up to retrieve a

number or a group from Contacts.

To enter an email address } Enter

email addr. A list below the send

options shows the last 10 recipients.

You can also select a recipient from

this list. } Send.

You can use your phone to send and

receive email messages. You can use

the same email settings in your phone

as in your computer email program.

For more information, contact your

network or service provider.

Before you start

First make sure that:

• Settings are in your phone, if not,

% 62 Settings.

• You have set up and selected an

email account. To download the

email account settings visit

Have your email account details

at hand.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

Default email account

To reply to an email message

1 Open the email message } Reply.

2 } Include message to include the

original message in your reply or

} Write new to exclude the original

message. Write your message. } More

to view options for the message.

3 } Send to send the message or

} More to view a list of options for

your message.

If you have both an office and a home

email account, you can set one of

them as default:

} Messaging } Email } Settings

} Account settings and select an

account.

To write and send an email message

1 } Messaging } Email } Write new.

2 Write the subject for your message

} Continue and then write the text

} Continue.

3 } Enter email addr. to enter an email

address or } Contacts look-up to

retrieve an address from Contacts.

4 Select Send to send your email

message or select More to view a list

of options for your message.

To save an email address or a phone

number in an email message

1 Select the email address or phone

number that you want to save } More.

2 To save an email address } Use

} Save address. To save a phone

number } Use } Save number.

To save an email message

1 Open the email message } More

} Save message } Saved email.

2 The message is saved in Saved email

in the Email menu.

To send, receive and read email

messages

1 } Messaging } Email } Inbox

} Send&rec (when inbox is empty)

or } Messaging } Email } Inbox

} More } Send & receive to send

or download new messages.

The number of email messages that

can be saved depends on how much

memory there is left in the phone. All

email messages are also saved on your

email server, and you can view both

older and newer messages on the server

2 Select a message } View to read it.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

To save several email messages

1 } Messaging } Email } Inbox.

2 Select a message } More } Mark

several.

3 Scroll and select more messages

by pressing Mark or Unmark.

4 } More } Save messages.

My friends

Connect and log in to the My friends

server to communicate online with

your favourite contacts. If your

subscription supports instant

messaging services, you can see

contact status if they are online, and

send and receive instant messages.

For more information, contact your

service provider or see

To delete an email message (POP3

users)

1 } Messaging } Email } Inbox and

select the message } More.

Transferring files using the USB cable.

To log in to your My friends server

} Messaging } My friends } Myself

} Log in.

2 } Mark for deletion. The message is

deleted the next time you connect to

your email server. If you want to delete

several messages } Mark several.

Scroll and select more messages by

pressing Mark or Unmark. } More

} Mark for deletion.

List of contacts

You can create a list of contacts from

your My friends server, people you

want to send messages to on a regular

basis.

To delete an email message (IMAP4

users)

1 } Messaging } Email } Inbox and

select the message } More.

2 } Mark for deletion. The message is

marked for deletion on the server. If

you want to delete several messages

} Mark several. Scroll and select more

messages by pressing Mark or

Unmark. } More } Mark for deletion.

3 } More } Clear inbox. and press

With send & rec. or No send & rec.

to delete messages.

To add a contact

} Messaging } My friends } More

} Add contact and select an option.

To send an instant message from

My friends

1 } Messaging } My friends and select

a contact.

2 } Send IM and type your message

} Send.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

Status

Area information

You can change your status shown to

others. You can also choose to display

it for your contacts only or for all users

on the My friends server.

Area information is a type of text

message that is sent to all subscribers

within a certain network area. When

you receive an area information

message, the message automatically

appears on the screen. Press Save to

save the message in your inbox, or

Discard to delete the message.

To change your own status

} Messaging } My friends } Myself

} Change.

Chatroom

Please consult your service provider for

more information about area information.

A chatroom can be started by your

service provider, by an individual

My friends user or by yourself. You

can save chatrooms either by saving

a chat invitation or by searching for

a specific chatroom.

To turn area information on or off

} Messaging } Settings } Area info

} Reception.

Cell information

To start a chatroom

1 } Messaging } My friends } More

} Start chatroom.

2 Select contacts to invite to the

chatroom from your list of contacts

} Continue.

3 Enter a short invitation text } Continue

} Send.

The cell information channel is used

by some network operators to send

messages about a certain network

area to their subscribers within that

area.

To turn on cell information

} Messaging } Settings } Area info

} Cell information.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

To activate the camera

Imaging

Camera, video recorder, pictures,

PhotoDJ™.

Camera and video recorder

Your phone has a digital camera which

also works as a digital video recorder.

You can take pictures, record video

clips, save and view them and send

them as email attachments or in

picture messages via picture

messaging.

While in standby, slide the lens cover

to activate the camera.

To take pictures and video clips

Before you start

The receiving phone needs to support

data transmission and picture

messaging in order to receive and

show the picture or video clip.

• Before you send a picture or video clip

using picture messaging make sure

that you have set the address of your

message server for picture messaging,

% 38 Picture messages (MMS) and

that Internet settings are entered in

your phone, % 62 Settings.

• Before you send a picture or video clip

using email make sure that you have

entered settings for a data account

and for an email account in your

phone, % 41 Email.

1 Use the navigation key to switch

between camera and video recorder.

2 Press

recording.

to take a picture or start

3 To end video recording, press

again. To deactivate the camera,

close the lens cover.

If you try to record a strong light source

such as direct sunlight or a lamp, the

screen may black out or the picture may

be distorted.

Imaging

This is the Internet version of the user's guide. © Print only for private use.

To use the zoom

Use the volume buttons on the side of

the phone to zoom in and zoom out.

• Picture size – choose between:

} Large 1600x1200

} Medium 640x480

} Small 160x120.

To adjust brightness

Use the navigation key to increase

or decrease brightness.

• Video size – choose between:

} Large 176x144

} Small 128x96.

• Turn on night mode – enhance picture

quality in poor lighting conditions with

longer exposure time.

To turn on the photo light

To take pictures in a dimly lit

environment, press

• Turn on light – to enhance lighting

conditions.

Camera and video options

When the camera or video is activated

} Settings to view more options.

• Turn on self-timer – the picture is

taken a few seconds after you press

the camera button.

• Switch to video camera – to record a

video clip instead of taking a picture.

• Switch to still camera – to take a

picture instead of recording a video

clip.

• Effects – select different effects for

your picture or video.

• White balance – adjust the picture

colour to the lighting conditions.

• Picture quality – choose between

Normal and Fine picture quality.

• Turn on time and date – add a time

and date to your picture.

• Shoot mode (camera) – select from:

} Normal – for no frame

} Panorama – to combine several

pictures into one wide picture

} Frames – to add a frame to your

picture

} Burst – to take four pictures in rapid

succession.

• Reset file no. – reset the file number

counter.

• Save to – select Memory Stick or

Phone memory to save the picture

or video.

• Shoot mode (video) – select from:

} High quality video

} For picture message – if you want

to send your video clip as a picture

message.

Imaging

This is the Internet version of the user's guide. © Print only for private use.

Take a self-portrait

pictures and video clips using other

transfer methods % 49 Exchanging

pictures.

To send a picture

When you have taken a picture } Send

to send the picture.

To send and play video clips

When you have finished your recording,

} Send to send the video clip.

Hold the phone as shown in the

illustration, so that you can see your

reflection in the mirror next to the lens.

} More } Play to play or press

to delete the video clip.

Press

to take the picture.

Transferring pictures to your

computer

Saving pictures and video clips

When you have taken a picture or

recorded a video clip, the phone saves

it in the phone memory or on the

memory card.

Using the USB cable, you can drag-

and-drop camera pictures to a

computer running Windows® 2000,

Windows ME, Windows XP and

Mac OS X.

If the memory card is full, you cannot

save any more pictures or video clips

on the memory card unless you delete

or move files, % 47 Transferring

pictures to your computer and % 71

To transfer pictures to a computer

1 Windows: Make sure you have

installed the USB drivers,

% 51 To install the USB drivers.

2 With the computer and phone

connected and turned on:

Sending pictures and video clips

When you have taken a picture or

recorded a video clip, you can send it

as a picture message if the file size has

not exceeded the limit. To exchange

Windows: Open Windows Explorer

and browse to Removable Disk

(drive:)\DCIM (if you have saved the

camera pictures on the memory card).

Mac OS X: Open the disk on the

Imaging

This is the Internet version of the user's guide. © Print only for private use.

desktop and browse to DCIM (if you

have saved the camera pictures on the

memory card).

supported are GIF, JPEG, WBMP and

BMP. % 71 Transferring files using the

USB cable.

3 Either move or copy the camera picture

files, or drag-and-drop them, to the

desired folder on your computer.

Windows: To further enhance and

organize the camera pictures in your

computer, install Adobe® Photoshop®

Album Starter Edition, included on the

CD that comes with phone.

To view your pictures

1 } File manager } Pictures.

2 The pictures are shown in thumbnail

view. To get a full view } View.

To display pictures in a slide show

1 } File manager } Pictures and scroll

to a picture.

2 } View } More } Slide show.

Pictures

To view information about a picture

or video clip

1 } File manager } Pictures or Videos,

select the picture or video clip.

Your phone comes with a number

of pictures and animations. You can

delete these pictures if you want to

free memory. All pictures are saved in

File manager } Pictures. You can:

2 } More and select Information.

• Use a picture as wallpaper and as a

screen saver.

• Assign a picture to a contact.

% 24 To add a picture or a ringtone to

a phone contact.

Using pictures

You can use a picture for several

purposes, for example, add it to a

contact, use it in the start-up screen,

or use it as a screen saver. The screen

saver is activated automatically when

the phone has been in idle mode for a

few seconds. After a few more seconds,

the screen saver changes to sleep

mode, to save power. Press any key

on the keypad and the screen turns

on again. If you have a picture as

wallpaper, this picture is shown in

standby mode.

• Exchange pictures using one of the

available transfer methods.

Handling pictures

You can add, edit or delete pictures

in the File manager. The number of

pictures that you can save depends

on the size of the pictures. File types

Imaging

This is the Internet version of the user's guide. © Print only for private use.

To use a picture

To send a picture

1 } File manager } Pictures and scroll

to the picture you want to use } More

} Use as.

} File manager } Pictures and scroll

to the picture you want. } More } Send

and select a transfer method.

2 Select what you want to use the

picture for.

To receive and save a picture

1 Open the message you received the

picture in, or turn on Bluetooth or the

infrared port if one of these transfer

methods was used to send the picture.

2 If you received the picture in a message,

select the picture and save it. If you

received the item via Bluetooth or

infrared, follow the instructions that

appear on the screen.

PhotoDJ™

When editing pictures press

and the following keys:

to activate the tool,

to select

the tool and

to select a colour.

To edit and save a picture

1 } File manager } Pictures and scroll

to the picture you want } View.

2 } More } Edit. Pictures you have

taken with the camera in the phone

can be edited.

All phones that support pictures can

receive the picture size 160 x 120.

Some phones that support pictures

cannot receive picture sizes of more

than 160 x 120. The best picture size

to view on a computer is 1600 x 1200.

3 } More } Save picture to save

a picture.

Exchanging pictures

Remote screen

You can exchange pictures using

one of the available transfer methods.

Please note that you are not allowed

to exchange some copyright-protected

material. For more information on

sending pictures in messages

% 36 Messaging.

You can view your pictures on a

remote screen, for example, a TV,

using a compatible Bluetooth adapter.

The adapter is an accessory and not

included in the box. You can then

use the phone to control the screen.

Use the slide show function to show

several pictures in succession.

Imaging

This is the Internet version of the user's guide. © Print only for private use.

To connect to a remote screen

} File manager } Pictures } View

} More } Remote screen. The phone

searches for other Bluetooth devices

and a list of available devices is

displayed. Select the device you

want to use.

Entertainment

Walkman® player, Disc2Phone, radio,

PlayNow™, ringtones, MusicDJ™,

VideoDJ™, sound recorder, themes,

games.

Walkman® player

The Walkman® player works as a

music player and video player all in

one. You can play music that you have

transferred to your phone using, for

example, Disc2Phone. You can play

music files and video clips that you

receive in a picture message, or that

you download to your phone. The

following file types are supported by

the Walkman® player: MP3, MP4,

3GP and WAV (with 16 kHz as

maximum sample rate). You can also

stream music and videos from Web

sites. When streaming, links have

to be 3GPP compatible.

Install, transfer and play music

Your phone works with the Disc2Phone

computer software, included on the

CD that comes with the phone. Use

Disc2Phone to transfer music from

CDs or your computer to the memory

card in your phone. This way the

music files are transferred in an

automatic Artist-Album-Title order.

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

Follow the procedures below to start

using the Walkman® player.

Each time you connect the phone and

the computer using the USB cable, a

dialog box on the computer asks you

to make a choice of what to do with files

on the removable disk (i.e. the memory

card in your phone). Select Take no

action to continue preparations for

using Disc2Phone.

Your computer needs to have one of the

following operating systems to be able

to use Disc2Phone: Windows® 2000

SP3/SP4, XP Home SP1/SP2 or

XP Professional SP1/SP2.

To install the USB drivers

To install Disc2Phone

1 Turn on your computer and insert the

CD that came with your phone into the

CD drive of your computer. If the

PC Suite installation window opens,

simply close it as it is not needed here.

2 Turn on your phone and connect the

USB cable to a USB port on the

computer and to the phone. The

"Found New Hardware Wizards"

starts on the computer.

3 Computer: Click Install the software

automatically and click Next.

4 The wizard should find the USB

software drivers automatically.

Click Finish.

1 Turn on your computer and insert

the CD that came with your phone

into the CD drive of your computer.

The CD starts automatically and the

installation window opens.

2 Computer: Select a language and

click OK.

3 Computer: Click Install Disc2Phone

and follow the instructions on the

screen. When the installation is

complete, the Disc2Phone icon

appears on the desktop of your

computer. You can also open

Disc2Phone via Start/Programs/

Disc2Phone/Disc2Phone.

5 Repeat steps 3 and 4 until all five

drivers are installed.

To transfer music

1 Make sure your phone is turned on

and connected to the computer with

the USB cable.

2 Computer: Double-click the

Disc2Phone icon on the computer

desktop to open Disc2Phone.

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

3 Computer: For details on transferring

Walkman® player controls

music, please refer to Disc2Phone

Help. Click

in the top right corner

of the Disc2Phone window.

Do not remove the USB cable from

the phone or computer during transfer,

as this may corrupt the memory card.

You cannot view the transferred files in

your phone until you have removed the

USB cable from the phone.

• Press

to stop the playback.

Press again to resume playing.

• Press

music track or video clip.

• Press to go back to the previous

music track or video clip.

or to fast

to go forward to the next

4 Computer: You can obtain CD

information (artist, track, etc.) via

Disc2Phone if you are connected to

the Internet while extracting music

from a CD. You must also complete

registration before you start.

• Press and hold

forward or rewind when playing

music tracks or video clips.

• Press

to show a track-by-

track view of the current list when

playing music tracks.

www.sonyericsson.com

• Press

to scroll through the

You can find more information on how

easy it is to move your favourite music

to your W700 Walkman® phone at

www.sonyericsson.com/support.

playlist during playback. Files that

are highlighted will not be selected

until you press Play.

• When a video clip is playing, press

to play the video in slow motion.

To resume normal playback, } Play.

• When a video clip is paused, press

to play the video one frame at a time.

To play music and videos

1 } WALKMAN. The Walkman® player

browser opens.

2 Browse for songs by artist or track,

or in playlists. You can also browse

• Press

to go to the Walkman®

player, or to minimize the Walkman®

player during playback.

for video clips. Press

to open a list,

press

to go back in a list.

• Press to go to the Walkman®

player browser when in the Now

playing view.

3 Highlight a title } Play.

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

Play/pause button

When you delete a playlist or a file

from the playlist, it is not deleted

permanently from the phone memory

or the memory card. You can add the

file to another playlist.

Press

to start or stop music.

Choose between using this button for

the Walkman® player or the FM radio,

or the most recently used of these.

To create a playlist

To change the button setting

1 } WALKMAN } Playlists } New playlist

} Add enter the name of the playlist

} OK.

2 Select among the files that are available

in the File manager. You can add

several files at a time and you can also

add folders. All files in the selected

folders will be added to the playlist.

From standby } Settings and scroll to

the General tab } Play/pause button.

Browsing files

In the Walkman® player browser you

can browse for music and video

content in lists:

• Artists – lists music you have

transferred using Disc2Phone.

• Tracks – lists all music files (not

ringtones) in your phone and on the

memory card.

To add files to a playlist

1 } WALKMAN } Playlists select a

playlist } Open } More } Add media.

2 Select among the files that are

available in the File manager.

• Playlists – create or play your own

lists of sound files.

• Videos – lists all video clips in your

phone and on the memory card.

To remove files from a playlist

1 } WALKMAN } Playlists select

a playlist } Open.

Playlists

2 Select the file and press

To organize the media files that are

stored in the File manager, you can

create playlists. Files in a playlist can

be sorted by artist, title or by the order

in which the files were added to the

playlist. You can add a file to more

than one playlist.

To delete playlists

} WALKMAN } Playlists select

a playlist and press

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

Walkman® player options

} More to view a selection of the

following options:

• Send – send a sound or video clip.

• Capture frame – when a video clip is

paused, capture a picture from the

video clip.

• Now playing – go to the Now playing

view.

Online music and videos

• Add media – add files or folders to

You can view videos and listen to

music that you find on a Web site by

streaming them to your phone. When

browsing and when you have found

a link for streaming, the Walkman®

player will open automatically when

the link is selected.

the playlist.

• Sort – sort the playlist by artist, title

or by the order in which files were

added to the playlist.

• Delete – remove a file from the playlist.

In playlists you have created, the file

is only removed from the playlist. In

the Artists list, the file is permanently

deleted from the memory.

• Rename – rename the playlist. You can

only rename user-created playlists.

• Delete playlist – delete the playlist.

Only the playlist is deleted; the files

are still listed in the File manager.

You can only delete user-created

playlists.

In order to stream you must have

a data account. Your phone may be

pre-configured with a data account.

If it is not, please contact your network

operator or visit

prohibited, % 88 Guidelines for Safe and

% 62 Settings.

To select a data account

1 } Settings } Connectivity tab

} Streaming settings.

2 Select the data account you want

to use.

• Information – view information about

the current track or video.

• Play mode – change the playback

order of songs and videos. Select

Shuffle on to play the playlist files

in random order, or Loop on to restart

the playlist when the last file has been

played.

To stream video and audio

1 } File manager } Videos } More

videos.

2 Follow the instructions to stream.

• Equalizer – change the settings of the

treble and bass when playing music.

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

To stream saved music and videos

1 } Internet services } More

} Bookmarks.

To change the button setting

From standby } Settings and scroll to

the General tab } Play/pause button.

2 Select a link to stream. The Walkman®

player will open and play the streamed

music or video.

Radio control

• } Search or press and hold

find the next channel on the band.

• Press

the FM band.

• Press or

channel.

to move 0.1 MHz along

for the next preset

Radio

Your phone features an FM radio with

RDS functionality. To use the radio,

you must connect the handsfree to

your phone, as the handsfree works as

an antenna. The radio can be used as

an alarm signal, % 72 Alarm clock.

Saving radio channels

You can save up to 20 of your

favourite radio channels.

You must switch your phone on to use

the radio. Do not switch the phone on

in areas where mobile phones are

Efficient Use.

To save channels quickly in positions

1 to 10, press and hold 0–9, (where 0

represents the number 10). To select

a channel you have saved in positions

1 to 10, press 0–9.

To listen to the radio

To save a radio channel

Connect the handsfree to your phone

} Radio. To minimize, return to

standby and use other functions with

} Radio } More } Save } Insert.

The channel is saved in a list.

Radio options

the radio still playing, press

} More for the following options:

Play/pause button

• Turn off – turn the radio off.

• Save – save the current frequency

in a list of channels.

Press

to start or stop music.

Choose between using this button for

the Walkman® player or the FM radio,

or the most recently used of these.

• Channels – select, rename, replace

or delete saved channels.

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

• Turn on speaker – listen through the

loudspeaker.

• Auto save – automatically search for

and save channels in a list of channels.

Previously saved channels will be

replaced.

• Set frequency – enter a frequency

manually. The figures you enter will

be automatically adjusted to valid

PlayNow™

This function is network- or operator-

dependent. Please contact your network

operator for information about your

subscription and PlayNow™. In some

countries you may be able to purchase

music tones from some of the world’s

top musical artists.

With the PlayNow™ service, you

can listen to music tones before you

decide to purchase and download

them to your phone. Each music

tone is part of an original song and

is optimized for your Sony Ericsson

mobile phone.

frequencies. Press

to Set frequency.

• RDS – options to turn on or off

alternative frequency (AF) and to

show or hide station information.

• Turn on Mono – turn mono sound on.

to go directly

While listening to the radio

If you minimize the radio display,

you can listen to the radio and use

another functionality at the same time.

For example, you can make and

receive calls, send messages and

play games.

Before you start

First make sure that:

• You have a phone subscription that

supports GPRS data transmission.

• You have entered the correct settings

in your phone, % 62 Settings.

• You may also have to register as a

WAP user with your service provider

or network operator.

To adjust the volume

}

• You have free memory in your phone.

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

Accessing the PlayNow™ music

tone list

By selecting the PlayNow™ icon,

you download the PlayNow™ music

tone list to your phone. You can now

listen to a music tone in the list.

for and made available. The music

tone is automatically saved in File

manager } Sounds.

The service may not always be available

in all countries or when you are using a

network other than your network

operator´s – a message will appear to

inform you about this when selecting the

PlayNow™ icon.

To listen to a music tone

} PlayNow™ and select a music tone

that you want to listen to.

Ringtones and melodies

Downloading a music tone from the

PlayNow™ list

Your phone comes with a number

of standard and polyphonic melodies

that can be used as ringtones. You

can exchange melodies using one of

the available transfer methods. Please

note that you are not allowed to

exchange some copyright-protected

material.

The total price for the download is the

price appearing on the screen when

you select to download and save a

music tone. Your phone bill or prepay

phone card will be charged by your

network operator after you have

purchased the tone.

To download a music tone

If you select an MP3 file as a ringtone,

you cannot use voice answering,

% 29 Voice answering.

1 When you have listened to a music

tone that you want to download, first

verify the purchase details above,

then read the terms and conditions

provided in the phone kit. By agreeing

to purchase in the phone, you also

agree to accept these conditions.

2 } Yes to download the music tone.

You will receive a text message that

confirms that the music tone is paid

To select a ringtone

From standby } Settings and scroll to

the Sounds & alerts tab } Ringtone.

To turn the ringtone on or off

Press and hold

from standby.

All signals except the alarm signal are

turned on or off.

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

To set the ringtone volume

1 From standby } Settings and scroll

to the Sounds & alerts tab } Ring

Sounds and alerts options

From Settings } the Sounds & alerts

tab, you can set:

volume and press

decrease or increase the volume.

2 } Save to save the setting.

• Message alert – select how you

want to be notified of an incoming

message.

• Key sound – select what sound you

want the keys to make when you

press them.

Caller-specific ringtones

If your subscription includes the

Calling Line Identification (CLI) service,

you can assign a personal ringtone to

callers, % 24 To add a picture or a

ringtone to a phone contact.

MusicDJ™

You can compose and edit melodies

to use as ringtones using the

™

Vibrating alert

MusicDJ . A melody consists of four

You can choose to be notified of an

incoming call by the buzzing of the

vibrating alert. You can set:

types of blocks – Drums, Basses,

Chords, and Accents. A track contains

a number of music blocks. The blocks

consist of pre-arranged sounds with

different characteristics. The blocks

are grouped into Intro, Verse, Chorus,

and Break. You compose a melody by

adding music blocks to the tracks.

• On – all the time.

• On if in Silent – on when the ring

volume is turned off or when you

have set the phone to silent.

• Off – all the time.

To compose a melody

To set the vibrating alert

} Settings } the Sounds & alerts tab

} Vibrating alert and select the setting

you want.

1 } Entertainment } MusicDJ™.

2 Choose to Insert, Copy and Paste

blocks to compose your melody.

Use

to move between

to delete a

the blocks. Press

block. } More to view more options.

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

To edit a previously created melody

} File manager } Sounds and select

the melody } More } Edit.

VideoDJ™

With the VideoDJ™, you can create

movies by combining video clips and

pictures that you have saved in your

phone or on the memory card. You

can also use VideoDJ™ to trim video

clips and edit video items.

Sending and receiving

You can send and receive melodies

using one of the available transfer

methods. Please note that you are not

allowed to exchange some copyright-

protected material.

To create a movie

1 } Entertainment } VideoDJ™.

2 } Add. Select to add a Video clip,

a Picture or Text } Select.

You cannot send a polyphonic melody

or an MP3 file in a text message.

To edit a video clip

To send a melody

1 } File manager } Sounds and select

a melody.

2 } More } Send and select a transfer

method.

1 } File manager } Videos } Open

and choose the video clip you want

to open.

2 } More } Edit } Edit to Trim, Replace

or Delete a clip from the current movie.

To receive a melody

To edit a picture

1 Open the message you received the

melody in, or turn on Bluetooth or the

infrared port if these transfer methods

are being used to send the melody.

2 If you received the melody in a

message, select the melody and

save it. If you received the item via

Bluetooth or infrared, follow the

instructions that appear on the

screen.

1 } Entertainment } VideoDJ™.

2 } Add } Picture. Choose the picture

you want to edit and } Select.

3 } Edit to Replace a picture, } Duration

to change the picture duration in the

movie or } Delete to delete the picture

from the current movie.

To edit text

} Edit to change a text string,

} Background to change the text

background, } Text colour to change

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

the font colour, } Duration to change

the duration of the text in the movie or

} Delete to delete the text from the

current movie.

Sound recorder

With the sound recorder, you can

record either your own memos or

calls. Recorded sounds can also be

set as ringtones. Recording of a

conversation is stopped if a participant

ends the call. Recording of all sounds

stops automatically if you receive a

call. Recordings are automatically

saved on the memory card if it is

inserted in the phone. If the recordings

are saved in the phone (or on the

memory card), they can be accessed

even if you change your SIM card.

VideoDJ™ options

When a movie is selected, } More

to view more options:

• Preview – to view the movie.

• Insert – to insert an item.

• Save – to save the current movie.

• Send – to send the current movie.

• New – to open another movie.

• Soundtrack – to add a soundtrack

to the current movie.

In some countries or states it is required

by law that you inform the other person

before recording the call.

Sending and receiving movies

You can send a movie using one of

the available transfer methods. Short

movies can be sent using picture

messaging. If a movie is too long,

you can use the Trim function to

make a movie shorter.

To start a sound recording

1 } Entertainment } Record sound.

2 Wait until you hear a tone. When

the recording starts, Recording is

displayed together with the time of

the current recording (increasing).

3 } Save to end the recording, and } Play

to listen to the recording. } More to

view the following options: Record

new, Send, Rename, Delete,

Movies that you receive and save are

saved in the File manager.

To trim a video clip

1 Select a video from the storyboard

} Edit } Trim.

2 } Set to set the start point and } Start.

3 } Set to set the end point and } End.

4 You can repeat steps 2 and 3 until you

are satisfied. } Done to finish the trim.

Recorded sounds.

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

To listen to your recordings

1 } File manager } Sounds and select

the recording you want to hear.

2 } Play to listen to the recording and

} Stop to stop playback.

To receive and save a theme

1 Open the message you received the

theme in, or turn on Bluetooth or the

infrared port if these transfer methods

are being used to send the theme.

2 If you received the theme in a message,

select the theme and save it. If you

received the item via Bluetooth or

infrared, follow the instructions that

appear on the screen.

Themes

You can change the appearance of the

screen, for example, the colours and

wallpaper, by using themes. Your

phone comes with some predefined

themes. You cannot delete these,

but you can create new themes and

download them to your phone.

For more information, visit

To download a theme

} File manager } Themes

} Sony Ericsson.

Games

Your phone has several entertaining

games. You can also download games

and applications directly to the folders

in your phone. Help texts are available

for most games.

To select or change a theme

} File manager } Themes and select

a theme.

Exchanging themes

To start and end a game

1 } Entertainment } Games and select

a game } Select.

You can exchange themes using one

of the available transfer methods.

To send a theme

1 } File manager } Themes and select

a theme.

2 } More } Send and select a transfer

method.

2 Press and hold

to end the game.

To download a game

} Entertainment } Games

} Sony Ericsson.

Entertainment

This is the Internet version of the user's guide. © Print only for private use.

Entering Internet and email settings

If the settings are not already entered

in your phone, you can:

Connectivity

Internet and email settings, Internet

browsing, synchronizing, Bluetooth,

infrared, USB cable, transferring files,

update service.

• Receive settings from your network

operator or service provider.

Settings are also available at

• Enter or edit settings manually.

Settings

Before you start using Internet,

messaging, My friends or PlayNow™,

settings are required in your phone.

Using the Internet

Your phone has a browser that uses

WAP (Wireless Application Protocol)

or HTTP (Hyper Text Transfer

Settings may already be entered

when you buy your phone. If not,

contact your network operator or

service provider for more information.

Settings are also available at

Protocol) to access the Internet.

To select an Internet profile

In order to use the Internet, and send

and receive picture and email

From standby } Settings and scroll

to the Connectivity tab } Internet

settings } Internet profiles and select

the profile you want to use.

messages, you need the following:

• A phone subscription that supports

data transmission.

• Settings entered in your phone.

• You may also have to register as an

Internet and email user with your

network operator or service provider.

To start browsing

} Internet services and select a

service or } Internet services } More

and select an option.

To stop browsing

} More } Exit browser.

Connectivity

This is the Internet version of the user's guide. © Print only for private use.

Options when browsing

} More to view different browsing

options. The options may vary

depending on which site you are

visiting.

• Save – save the Web page or a picture

from the current Web page.

• Send link – send a link to the current

site to another phone.

• Status – display current status

information, for example, profile,

access type, security, address.

• Appearance – select to play the sounds

or show the pictures on visited pages.

• Make a call – if your subscription

supports it, you can make a call while

browsing the Internet. } More } End

call to end the call and continue

browsing.

If you select an email address when

browsing a Web site, you can send a text

message to that address.

The options menu always contains the

following:

• Exit browser – disconnect and go to

standby.

• Go to the homepage set for the current

Using bookmarks

Internet profile.

You use bookmarks in your mobile

phone just as you do with a computer

Internet browser. You can create and

edit bookmarks.

• Bookmarks – add the site you are

currently browsing to your list of

bookmarks, or view the list of

bookmarks. Select to stream music

or videos.

• Enter address – enter the Web page

address of a site you want to visit.

} New address to enter a new Web

page address or select one of the 10

latest entered addresses. When you

enter a Web page address, the normal

http:// prefix is not needed.

• Clear cache – clear all temporary stored

Internet files saved in the phone.

• History – list of previously visited sites.

• Refresh page – refresh the contents of

the Web page.

To work with bookmarks

1 } Internet services } More

} Bookmarks and select a bookmark

} More.

2 Select an option.

Downloading

You can download, for example,

pictures, themes, games and

ringtones from Web sites directly

to your phone.

Connectivity

This is the Internet version of the user's guide. © Print only for private use.

To clear the password list

From standby } Settings and scroll

to the Connectivity tab } Internet

settings } Clear passwords and

} Yes to confirm.

Contact your network operator or service

provider for more information if menu

options are not available.

To download from the Sony Ericsson

Web site

Internet profile for Java™

applications

1 } Internet services } Sony Ericsson.

2 Select what you want to download and

follow the instructions that appear.

Some Java™ applications need to

connect to the Internet to receive

information, for example, games that

download new levels from a game

server.

Stored information

When browsing, you can save

information in your phone.

You need an HTTP Internet profile

to allow Java™ applications to connect

to the Internet. Please contact your

network operator or service provider

for the correct settings.

It is advisable to clear any sensitive

information about previously visited

Internet services. This is to avoid a

security risk if your phone is misplaced,

lost or stolen.

The following information can be

saved:

To select a profile for Java™

1 From standby } Settings and scroll

to the Connectivity tab } Settings for

Java™.

2 Select the HTTP profile you want

to use.

• Cookies – improve site access

efficiency.

• Passwords – improve server access

efficiency.

Internet security

To allow or clear cookies in your

phone

From standby } Settings and scroll

to the Connectivity tab } Internet

settings } Cookies and select an

option and confirm.

Your phone has support for both WAP

and HTTP secure browsing. To activate

a secure connection to the WAP

gateway, you need to turn on security

in your Internet profile. If your Internet

Connectivity

This is the Internet version of the user's guide. © Print only for private use.

profile is an HTTP profile, the

connection will be secure if the URL

starts with https://.

To check the certificates in your

phone

From standby } Settings and scroll

to the Connectivity tab } Internet

settings } Security } Trusted cert.

Security for a connection between

a WAP gateway and a WAP service

provider is the responsibility of the

WAP service provider.

Synchronizing

You can synchronize your phone

contacts, appointments, tasks and

notes with similar programs in, for

example, a computer or mobile phone

using Bluetooth, the infrared port or

the USB cable (synchronization with

nearby devices). Synchronization

software for your computer is available

on the CD that comes with the phone.

To turn on a secure connection

(Internet)

1 From standby } Settings and scroll

to the Connectivity tab } Internet

settings } Internet profiles and select

a profile } More } Settings.

2 Turn on security.

Trusted certificates

You can also synchronize with

programs on the Internet using WAP

or HTTP (remote synchronization with

Internet services). Please visit

www.sonyericsson.com/support to

download Getting started guides on

synchronization.

To establish a secure connection

when using certain Internet services,

for example, banking, you need

certificates in your phone.

Trusted certificates are used to

verify the WAP gateway or the HTTP

server that you are connecting to.

Your phone may already contain

trusted certificates when you buy it.

You can also download new

When using USB, make sure you only use

the USB cable that comes with the phone.

To select sync order for names

} Contacts } Options } Advanced

} Sync. order to select the order in

which first and last name appear in

the phone when you synchronize

contacts.

certificates using the browser.

Connectivity

This is the Internet version of the user's guide. © Print only for private use.

Synchronization with nearby devices

Install the computer synchronization

software from the CD that comes

with your phone or download it from

For detailed information, please refer

to the computer synchronization

software help.

3 } Connection and select the WAP or

HTTP profile that you want to use for

the synchronization.

4 } Remote initiation to set wheter

to allow the synchronization server

or other device to initiate a

synchronization or not. You can

also choose to always be asked.

5 } Sync. interval to set how often

you want the phone to automatically

connect to the server and start

syncronization.

6 } Applications and select the

applications that you want to

synchronize, for example, Contacts

} OK.

Remote synchronization with Internet

programs

Contact your network operator for

more information about the programs

on the Internet with which you can

synchronize, and to receive username,

password and addresses for the

different programs. You must also

have an Internet profile set in your

mobile phone % 62 Settings.

7 } App.settings and select an

application. Enter the name of the

database and, if required, your

username and password } OK.

To enter the remote synchronization

settings

8 Press

account.

} Save to save your new

1 } Organizer } Synchronization } New

account. If you do not have an account,

you will be asked if you want to create

an account. } Yes to create a new

account.

To start the remote synchronization

} Organizer } Synchronization and

select a remote account } Start.

2 Enter a name for the new account

} Continue. A list of items to enter

will appear. Add the server address

of the synchronization server, a server

username and a server password.

} OK when you have entered each

setting.

Connectivity

This is the Internet version of the user's guide. © Print only for private use.

and browse the Internet, you also

need to install software on your

computer from the CD that comes

with your phone, or download it from

Bluetooth™ wireless

technology

Your phone has built-in Bluetooth

which makes it possible for you to

connect your phone wirelessly to other

Bluetooth devices. You are able to be

connected to several Bluetooth

devices at the same time. You can

automatically synchronize information

in your phone and your computer and

use the remote control functionality to

control applications on your computer.

You can also exchange, for example,

business cards, calendar items and

pictures.

Please check if local laws or regulations

restrict the use of Bluetooth. If Bluetooth

is not allowed, you must ensure that the

Bluetooth function is turned off. The

maximum allowed Bluetooth radio output

power in the phone is automatically

adjusted according to possible local

restrictions. This means that the range

may vary.

To turn Bluetooth on

From standby } Settings and scroll

to the Connectivity tab } Bluetooth

} Turn on.

We recommend that your phone and the

Bluetooth device you are communicating

with are within a range of 10 metres. The

connection may be improved if there are

no solid objects between your phone

and the other Bluetooth device.

To add a device to your phone

1 } Settings } the Connectivity tab

} Bluetooth } My devices } New

device. The Bluetooth function of

the other device must also be on

and not hidden.

2 } Add and your phone will search

for all types of available Bluetooth

devices.

Before you start

To communicate with another

Bluetooth device, you first need to

turn Bluetooth on. You can also add

the device to the list of devices in

your phone. You can exchange items,

use a remote screen and play games

without adding the device to the list.

To synchronize with your computer

3 The phone searches for Bluetooth

devices. A list of available devices

is displayed. Select a device.

Connectivity

This is the Internet version of the user's guide. © Print only for private use.

4 If the device you are adding to your

phone has its own passcode, enter

this passcode in your phone. If not,

create a passcode of digits yourself

and enter it in both devices.

Visibility

In order for your phone to be found

when searched for by other Bluetooth

devices, you must make sure that

Bluetooth is turned on and your phone

is visible to other devices.

To organize your list of devices

1 } Settings } the Connectivity tab

} Bluetooth } My devices and select

a device from the list.

To hide or show your phone when

using Bluetooth

1 } Settings } the Connectivity tab

} Bluetooth } Visibility.

2 } More to view a list of options.

2 } Show phone or Hide phone.

Power save

Sending and receiving

You can choose to turn this feature on

or off if you do not want to use several

Bluetooth functions at the same time.

If you turn it on, the phone will save

power and it will prevent other devices

from connecting to your phone when

you are already connected to one.

To send or receive an item using

Bluetooth, you need to make sure

that the devices are within range.

After you select Bluetooth as the

transfer method for sending, a list

of possible receiving devices is

presented. The phone also searches

for other devices that are shown in

the list.

To save power

} Settings } the Connectivity tab

} Bluetooth } Power save } On.

To send an item

Phone name

1 Select the item that you want to send,

} Contacts and select a contact.

2 } More } Send contact } Via

Bluetooth. The phone searches for

devices.

Choose a unique name for your phone.

This name is shown in other devices

when your phone is found.

To enter a phone name

} Settings } the Connectivity tab

} Bluetooth } Phone name.

3 Select the device you want to send the

item to } Select.

Connectivity

This is the Internet version of the user's guide. © Print only for private use.

To receive an item

To transfer sound when using

a handsfree

During a call, } More } Transfer sound.

Select to transfer sound either to the

phone or to other handsfree devices

that have been added to your phone.

} Settings } the Connectivity tab

} Bluetooth } Turn on. Make sure that

your phone is visible to other devices.

When you receive the item, follow the

instructions that appear on the screen.

Directing sound

To add a Bluetooth handsfree to your

phone

1 } Settings } the Connectivity tab

} Bluetooth } Handsfree.

You can select where the sound

should be handled when answering

an incoming call with the keypad on

the phone. If you use the button on

the handsfree, the sound will always

be in the handsfree.

2 The first time you add a handsfree,

Add a handsfree device to use with

the phone? is displayed } Yes.

3 If you already have a handsfree

in your list of devices, } Settings

} the Connectivity tab } Bluetooth

} Handsfree } My handsfree } New

handsfree } Add. You should ensure

that your Bluetooth handsfree is in

pairing mode.

To direct sound when answering

a call with a handsfree

1 } Settings } the Connectivity tab

} Bluetooth } Handsfree } Incoming

call.

2 } In phone if you always want to have

the sound in the phone or In handsfree

if you want to direct the sound to the

handsfree.

Transferring sound

When you are using a Bluetooth

handsfree with your phone, you can

choose where the sound should be

transferred during a call. You can also

select where the sound should be

handled when answering an incoming

call with the keypad.

Remote control

You can use your phone as a remote

control device to control computer

applications such as a media player

or Microsoft PowerPoint

presentations. Your computer must

support Bluetooth HID Profile.

Connectivity

This is the Internet version of the user's guide. © Print only for private use.

To select remote control

1 } Entertainment } Remote control.

2 Select the application you want

to use and the computer you want

to connect to.

To turn the infrared port on

} Settings } the Connectivity tab

} Infrared port } On or } 10 minutes

to turn on infrared for 10 minutes only.

To connect two devices

File transfer

You can use a computer to view and

transfer content in the file manager.

You can use the drag-and-drop

function of your computer to:

• Transfer files between your phone

and the computer.

• Delete files from the phone.

1 Turn on the infrared port of both

devices.

2 Make sure that the infrared port on

your phone faces the infrared port

on the other device.

Infrared port

You can use the infrared port to

establish contact between your

phone and a computer or another

device equipped with an infrared port.

You can, for example, synchronize

calendar items, % 65 Synchronizing,

and send items such as pictures and

contacts.

3 Your phone now establishes contact

with the other device.

To send an item using the infrared

port (example: a contact)

1 Make sure that the infrared ports of

both devices are on. } Contacts and

select a contact.

If you are connecting to a computer,

please refer to its user documentation.

Make sure that the infrared speed in the

computer is set to 115200 bps.

2 } More } Send contact } Via infrared.

Connectivity

This is the Internet version of the user's guide. © Print only for private use.

• Pictures taken by the camera are saved

in the \DCIM\ folder, % 47 Transferring

pictures to your computer.

Transferring files using the

USB cable

When you connect your phone to a

computer using the USB cable, the

memory card appears as a drive on the

computer. If you are a Windows user,

you can install the USB cable drivers

using the CD that comes with your

phone, % 51 To install the USB

drivers.

Your computer needs to have one of the

following operating systems to be able

to use this feature: Windows® 2000,

Windows ME, Windows XP and Mac OS X.

To end a USB connection

1 Exit the USB connection on your

computer. In Windows, click the

Safely Remove Hardware icon in the

taskbar, and follow the instructions.

2 Remove the USB cable from your

phone.

Make sure you use only the USB cable

that comes with the phone, and that you

connect the USB cable direct to your

computer. Do not remove the USB cable

from the phone or computer during

transfer.

Update service

You can use the drag-and-drop

functionality in your computer to:

With the Sony Ericsson Update Service

you can keep your phone updated

with the latest software. When a new

software version is available, you

can download and install it using the

provided USB cable and an Internet-

connected computer.

• Transfer files between your phone and

the computer.

• Move, delete and organize files on the

memory card.

Files must be saved in specific folders

on the memory card:

To update the phone software

1 Visit www.sonyericsson.com/support.

2 Select a region and country.

3 Enter the product name.

4 Select Sony Ericsson Update Service

and follow the instructions that appear.

• Pictures must be saved in

\MSSEMC\Media files\image\

• Music must be saved in \MSSEMC\

Media files\MP3, or copied using

Disc2Phone, % 50 Walkman® player

• Java applications and games must be

saved in \MSSEMC\Media files\other\

Connectivity

This is the Internet version of the user's guide. © Print only for private use.

Using the alarm

More features

Time and date, alarm clock, calendar,

tasks, Java™ applications, SIM card

lock, etc.

• To change the alarm time } Organizer

} Alarms } Alarm and enter a new

time.

• To turn the alarm signal off when it

rings, press any key. If you do not

want the alarm to be repeated } Turn

off. If the radio is selected as an alarm

signal } Snooze.

• To cancel the alarm } Organizer

} Alarms } Alarm } Turn off.

• To set a recurrent alarm } Organizer

} Alarms } Recurrent alarm. Enter

the time and select the days that you

want the alarm to recur on by scrolling

and pressing Mark. } Done to exit

the menu.

Time and date

The time is always displayed in standby.

• To set the time } Settings } the

General tab } Time & date } Time.

Enter the time } Save.

• To set the time format } Format

and select an option.

• To set the date and date format

} Settings } the General tab

} Time & date } Date.

• To select an alarm signal } Organizer

} Alarms } Alarm signal. Select Radio

or Sounds.

Alarm clock

The alarm can be set to ring at a

specific time within 24 hours, or

recurrently at a specific time on

several days. You can have both

these alarms set at the same time.

The alarm signal rings even if the

phone is set to silent or turned off.

If you choose Radio as the alarm signal,

please make sure that the handsfree is

connected to the phone.

Calendar

You can use the calendar to keep track

of important meetings. The calendar

can be synchronized with a computer

calendar or with a calendar on the

Web, % 65 Synchronizing.

The alarm can use the radio as an

alarm signal, % 55 Radio.

To set an alarm

} Organizer } Alarms } Alarm and

enter the time } Save.

More features

This is the Internet version of the user's guide. © Print only for private use.

Appointments

to turn off the reminder. A reminders

option set in the calendar affects a

reminders option set in tasks.

You can choose to add a new

appointment or use an old one as

a template by copying and editing it.

You can also set reminders for

appointments.

Navigating in your calendar

Use the navigation key to move

between days or weeks. In the

monthly and weekly views, you can

also use the keypad as follows.

To add a new appointment

1 } Organizer } Calendar and highlight

the date for the appointment } Select

} New appointment } Add.

Back a week

Back a month

Back a year

Today’s date

Next week

Next month

Next year

2 Enter details and confirm each entry.

To view an appointment

1 Organizer } Calendar and select

a day on which you have an

appointment (marked in bold).

2 Scroll to the appointment } View.

Calendar settings

} Organizer } Calendar } More and

select an option.

To view your calendar content

} Organizer } Calendar. Days on

which you have appointments are

marked in bold. } More } View week

to view a certain week.

• View week – select, add, edit or delete

appointments.

• New appointment – add a new

appointment.

• Change date – change the date

of your calendar.

• Advanced – for options to find,

delete all, set reminders or select

a start day for the week.

To set when reminders should sound

1 } Organizer } Calendar } More

} Advanced } Reminders.

2 } Always if you want the reminder

to sound even though the phone is

turned off. When the reminder sounds

} Yes to read the appointment. } No

Exchanging appointments

You can send and receive appointments

using one of the available transfer

methods.

More features

To send an appointment

} Yes to read the task, or to call the

phone number in a phone task. } No

to turn off the reminder. A reminders

option set in tasks affects a reminders

option set in the calendar.

In the list of appointments for a certain

day, select the item you want to send

} More } Send and select a transfer

method.

Exchanging tasks

Tasks

You can send and receive tasks using

one of the available transfer methods.

You can also synchronize tasks with

a computer, % 65 Synchronizing.

You can keep track of phone calls you

need to make or tasks that you need

to do. You can choose to add a new

task or use an old one as a template

by copying and editing it. You can also

set a reminder for a task.

To send a task

1 In the list of tasks for a certain day,

select the item you want to send

} More } Send.

To add a new task

1 } Organizer } Tasks } New task

} Add.

2 Select a transfer method.

2 Select a category. If the category is

a phone call, enter the phone number

} Continue.

3 Enter a subject } Continue.

4 If you want to set a reminder for your

task } Yes.

Notes

If you need to remember something,

you can make a note of it in your

phone.

To add a note

} Organizer } Notes } New note

To view a task

} Organizer } Tasks and select a task

} View.

} Add and enter the note } Save.

To handle notes

1 } Organizer } Notes and a list

of notes appears.

2 Select the note that you want to handle.

} More to edit, show a note in standby

(or hide it), send or delete a note.

To set when reminders should sound

1 } Organizer } Tasks and select a task

} More } Reminders.

2 } Always if you want the reminder

to sound even though the phone is

turned off. When the reminder sounds

More features

Exchanging notes

Stopwatch

You can send and receive notes using

one of the available transfer methods.

You can also synchronize notes with

a computer, % 65 Synchronizing.

Your phone has a stopwatch that

can save several laps. The stopwatch

continues to run when you answer

an incoming call.

To send a note

To use the stopwatch

} Organizer } Notes and select the

note that you want to send } More

} Send and select a transfer method.

1 } Organizer } Stopwatch } Start.

2 } Stop or } New lap if you want

a lap time.

3 To reset the stopwatch } Reset.

Profiles

Your phone has predefined profiles that

are set to suit a certain environment.

You can reset all profile settings to the

way they were set when you bought

your phone.

Timer

To set the timer

} Organizer } Timer and enter the

hours, minutes and seconds after

which you want the timer to go off.

When the signal rings, press any

key to turn it off.

To select a profile

} Settings } the General tab } Profiles

} Select profile.

Brightness

To change a profile setting

You can adjust the brightness of the

screen.

} Settings } the General tab } Profiles

} Edit profile and select the setting

that you want to change.

To set the brightness

} Settings } the Display tab

} Brightness.

To rename a profile

} Settings } the General tab } Profiles

} Edit profile } Profile name. You

cannot rename the normal profile.

More features

Java application security

Start-up screen

Java applications are automatically

installed as "Trusted" or "Untrusted".

Trusted applications are allowed to,

for example, connect to networks,

send messages or use the camera

without asking for permission.

Untrusted applications, however,

must always confirm such actions

with you first. You can set different

permission levels for your Java

applications.

When you turn your phone on or off,

the start-up screen appears. You can

also set your own start-up screen.

To select a start-up screen

} Settings } the Display tab } Start-

up screen and select an option for the

start-up screen.

Calculator

The calculator can add, subtract,

divide and multiply.

To set permissions for a Java™

application

1 } File manager } Applications or

} Games.

2 Select an application or a game

} More } Permissions.

3 } Internet access, Messaging or

Multimedia.

To use the calculator

} Organizer }Calculator.

• Press

to select ÷ x - + . % =

to delete the figure.

to enter a decimal point.

Java™ applications

4 } No, Always ask or Ask once

to set the permission level you

want for the application.

You can run Java™ applications on

your phone. Games and other Java

applications can be downloaded to

your phone from the Internet.

Java application screen size

Some Java applications are designed

for a specific screen size. In some

cases, applications may not be able to

start because the phone cannot adapt

the application to the screen. Contact

To open a Java™ application

} File manager } Applications or

} Games.

More features

the application vendor to find out what

screen size the application is designed

for, and change the screen settings for

the application in the phone.

are supplied by your network operator.

You can edit your PIN and select a

new four- to eight-digit PIN.

If the message Codes do not match

appears when you edit your PIN, you

entered the new PIN incorrectly. If the

message Wrong PIN appears, followed

by Old PIN:, you entered your old PIN

incorrectly.

To set the screen size for a Java

application

1 } File manager } Applications or

} Games.

2 Select an application or a game

} More } Screen size.

3 Select one of the listed options. If you

selected User defined you can edit

the Width: and Height: values.

To unblock your SIM card

1 When PIN blocked is displayed, enter

your PUK } OK.

2 Enter a new four- to eight-digit PIN

} OK.

SIM card lock

3 Re-enter the new PIN to confirm } OK.

The SIM card lock protects your

subscription, but not your phone itself,

from unauthorized use. If you change

SIM cards, your phone still works with

the new SIM card.

To edit your PIN

1 } Settings } the General tab } Locks

} SIM lock } Change PIN.

2 Enter your PIN } OK.

3 Enter a new four- to eight-digit PIN

} OK.

4 Re-enter the new PIN to confirm } OK.

Most SIM cards are locked at the

time of purchase. If the SIM card lock

is on, you have to enter a PIN

(Personal Identity Number) every time

you turn on your phone.

To turn the SIM card lock on or off

1 } Settings } the General tab } Locks

} SIM lock } Protection and select On

or Off.

If you enter your PIN incorrectly

three times in a row, the SIM card is

blocked. This is indicated by the

message PIN blocked. To unblock it,

you need to enter your PUK (Personal

Unblocking Key). Your PIN and PUK

2 Enter your PIN } OK.

More features

Automatic phone lock

Keypad lock

If the phone lock is set to automatic,

you do not need to enter your phone

lock code until a different SIM card is

inserted in the phone.

You can lock the keypad to avoid

dialling a number by accident.

Calls to the international emergency

number 112 can still be made, even

when the keypad is locked.

It is important that you remember your

new code. If you should forget it, you

have to hand in your phone to your

local Sony Ericsson retailer.

Automatic keylock

In standby, automatic keylock means

the keypad is locked a short while

after you last press a key.

To set the phone lock

1 } Settings } the General tab } Locks

} Phone lock } Protection and select

an alternative.

To set the automatic keylock

} Settings } the General tab } Locks

} Automatic keylock.

2 Enter the phone lock code } OK.

To lock the keypad manually

To unlock the phone

If the phone lock is on, enter your

code } OK.

In standby press

} Lock keys.

You can still answer an incoming call

and the keypad locks again after the

call. The keypad remains locked until

you unlock it manually.

To edit your phone lock code

} Settings } the General tab } Locks

} Phone lock } Change code.

To unlock the keypad, press

} Unlock.

Code memo

Instead of having to remember security

codes for credit cards, for example,

you can save them in the code

memo in your phone. All you need

to remember is the passcode to

open the code memo.

Phone lock

The phone lock protects your phone

against unauthorized use if it is stolen

and the SIM card is exchanged. You

can change the phone lock code (0000)

to any four- to eight-digit personal code.

More features

Checkword and security

To change the passcode

To confirm that you have entered the

correct passcode for the code memo

and to prevent unauthorized access

to your codes, you must enter a

checkword.

1 Open code memo as described above

} More } Change passcode.

2 Enter your new passcode } Continue.

3 Re-enter the new passcode } Continue.

4 Enter a checkword } Done.

When you enter your passcode to

open the code memo, the checkword is

shown for a short time. If the passcode

is correct, the correct codes are shown.

If you enter the incorrect passcode,

the checkword and the codes that are

shown are also incorrect.

Forgot your passcode?

If you forget your passcode, you must

reset the code memo.

To reset code memo

1 } More } Reset.

2 Reset code memo? is displayed } Yes.

The code memo is reset and all entries

are cleared. The next time you enter

the code memo, you must start by

opening the code memo for the first

time.

To open code memo for the first time

1 } Organizer } Code memo.

A message with instructions is

displayed } Continue.

2 Enter a four-digit passcode to open

code memo } Continue.

3 Re-enter the new passcode to confirm.

4 Enter a checkword (maximum 15

characters) } Done. The checkword

can consist of both letters and

numbers.

To add a new code

1 } Organizer } Code memo and enter

your passcode } New code } Add.

2 Enter a name associated with the

code, } Continue.

3 Enter the code } Done.

More features

You also have the option to do a

Master reset. Some of your personal

data and settings you have made will

be lost when doing this. % 83 Master

reset.

Troubleshooting

Why doesn’t the phone work the way I

want?

This chapter lists some problems that

you might encounter while using your

phone. Some problems require you to

call your network operator, but you can

easily correct most of the problems

yourself.

No battery icon appears when I start

charging the phone

Possible cause: The battery is empty

or has not been used for a long time.

Solution: It may take up to 30 minutes

before the battery icon appears on the

screen.

However, if you need to hand in your

phone for repair, please note that you

may lose information and content that

you have saved in your phone. You

are advised to make a copy of such

information before handing your

phone in for repair.

Some menu options appear in grey

Possible cause: Grey text indicates

a function that is temporarily

unavailable. A service is not activated

or your subscription does not support

the function.

For more support go to

I have problems with memory

capacity or the phone working slowly

Solution: Contact your network

operator.

Possible cause: The phone memory

is full or the memory contents are not

properly organized.

Possible cause: Since you cannot

send themes, pictures and sounds

that are copyright-protected, the Send

menu is sometimes unavailable.

Solution: Restart your phone every

day to free memory and increase the

capacity of your phone.

Troubleshooting

I do not understand the language in

menus

Possible cause: The wrong language

is set in the phone.

Solution: Remove the battery and

clean the connectors. You can use a

soft brush, cloth or q-tip, soaked with

alcohol. Make sure that the battery is

completely dry before you put it back.

Check that the battery connectors in

the phone are undamaged.

Solution: Change the language,

% 16 Phone language.

I cannot turn on the phone

Possible cause: The battery is

discharged.

Possible cause: The battery is worn

out and needs to be replaced.

Solution: Try another battery and

charger for the same phone model,

or visit your retailer and ask them to

verify if the battery and charger are

working properly.

Solution: Recharge the battery,

% 5 To charge the battery.

Solution: Make sure you attached the

charger correctly. Turn the phone on

with the charger attached. If the phone

starts, restart the phone with no

charger attached.

The phone turns itself off

Possible cause: The

button has

been pushed unintentionally.

I cannot charge the phone or battery

capacity is low

Possible cause: The charger is not

properly connected to the phone.

Solution: Turn on the automatic key

lock, or lock the keypad manually,

% 78 Keypad lock.

Possible cause: The battery

connection is bad.

Solution: Make sure that the charger

connector clicks properly into place

when connected. The battery icon

flashes when charging is in progress,

and stops when the battery is fully

charged, % 5 To charge the battery.

Solution: Make sure the battery is

inserted correctly, % 5 To insert SIM

card and battery.

Possible cause: The battery

connection is bad.

Troubleshooting

I cannot use SMS/text messages

on my phone

Possible cause: Settings are missing

or incorrect.

Solution: Go to

choose your phone model, then

choose “Phone setup – WAP” and

follow the instructions. % 62 Settings.

Solution: Contact your network

operator to find out the correct SMS

service centre setting, % 36 Text

messaging (SMS).

The phone cannot be detected by

other users via Bluetooth

Possible cause: You have not turned

Bluetooth on.

I cannot use MMS/picture messages

on my phone

Possible cause: Your subscription

does not include data capability.

Solution: Make sure that Bluetooth is

turned on and that your phone is visible

to other users. % 68 To hide or show

your phone when using Bluetooth.

Solution: Please contact your network

operator.

I have problems synchronizing or

transferring data between my phone

and my computer, when using the

USB cable that came with the phone

Possible cause: Settings are missing

or incorrect.

Possible cause: The cable has not

been properly detected and installed

on your computer.

The software that came with your

phone has not been properly installed

on the computer.

Solution: Go to

choose your phone model, then

choose “Phone setup – MMS” and

follow the instructions. % 62 Settings.

I cannot use the Internet/WAP

Possible cause: Your subscription

does not include data capability.

Solution: Go to

On www.sonyericsson.com , under the support

choose your phone model, then

choose “Product information” -

“Getting started”. The guide

“Synchronizing the phone with a

computer” contains installation

Solution: Please contact your network

operator.

Possible cause: Internet settings are

missing or incorrect.

Troubleshooting

instructions and a troubleshooting

guide, that may assist you in solving

the problem.

Error messages

Insert SIM

Possible cause: There is no SIM card

in the phone or you may have inserted

it incorrectly.

Master reset

The changes that you have made to

settings and the content that you have

added or edited, will be deleted.

Solution: Insert a SIM card.

% 5 To insert SIM card and battery.

• If you select Reset settings, the

changes that you have made to

settings will be deleted.

• If you select Reset all, in addition to

your changes to settings, all contacts,

messages, personal data, and content

that you have downloaded, received

or edited will also be deleted.

Possible cause: The SIM card

connectors need cleaning.

Solution: Remove the SIM card and

clean it. Also check that the card is not

damaged in a way that may prevent

connection to the phone connectors.

In that case, contact your network

operator for a new SIM card.

To reset the phone

Insert correct SIM card

Possible cause: The phone is set to

work only with certain SIM cards.

1 } Settings } the General tab } Master

reset.

2 } Reset settings or } Reset all.

3 } Yes to continue.

4 Enter the phone lock code (0000 or

the new code if you have changed it)

} OK.

Solution: Check if you are using the

correct operator SIM card for your

phone.

Wrong PIN/Wrong PIN2

Possible cause: You have entered your

PIN or PIN2 incorrectly.

If you select Reset all, content such as

melodies and pictures that you have

downloaded, received or edited is also

deleted.

Solution: Enter the correct PIN or PIN2

} Yes. % 77 SIM card lock.

Troubleshooting

PIN blocked/PIN2 blocked

Possible cause: You have entered your

PIN or PIN2 code incorrectly three

times in a row.

Possible cause: The phone is not

working properly.

Solution: Insert your SIM card in

another phone. If this works, it is

probably the phone that is causing the

problem. Please contact the nearest

Sony Ericsson service location.

Solution: To unblock, % 77 SIM card

lock.

Codes do not match

Possible cause: The two codes that

you have entered do not match.

Emerg. calls only

Possible cause: You are within range

of a network, but you are not allowed

to use it. However, in an emergency,

some network operators allow you

to call the international emergency

number 112.

Solution: When you want to change

a security code (for example your PIN)

you have to confirm the new code by

entering exactly the same code again.

% 77 SIM card lock.

Solution: You have to move to get a

signal that is strong enough. Contact

your network operator and make sure

your subscription is ok.

No netw. coverage

Possible cause: Your phone is not

receiving any radio signal, or the

received signal is too weak.

% 22 Emergency calls.

Solution: Contact your network

operator and make sure that the

network has coverage where you

are. If so, try to do a new search.

Phone locked

Possible cause: The phone is locked.

Solution: To unlock the phone,

% 78 Phone lock.

Possible cause: The SIM card is not

working properly.

Phone lock code:

Possible cause: The phone lock code

is required.

Solution: Insert your SIM card in

another phone. If you still get the same

or a similar message, please contact

your network operator.

Troubleshooting

Solution: Enter the phone lock code.

Your phone comes with the default

phone lock code 0000. You can

change it to any four- to eight-digit

code. % 78 Phone lock.

PUK blocked

Possible cause: You entered your

personal unblocking key code (PUK)

incorrectly 10 times in a row.

Solution: Contact your network

operator.

Charging, alien battery

Possible cause: The battery that you

are using is not a Sony Ericsson

approved battery.

Solution: % 88 Guidelines for Safe and

Efficient Use.

Troubleshooting

Important information

section in the language of your choice, you will find

the latest support tools and information, such as

software updates, Knowledgebase, Phone setup

and additional help when you require it.

For operator-specific services and features, please

contact your network operator for more

information.

You can also contact our Call Centers. See the

phone number for the nearest Call Center in the list

below. If your country/region is not represented in

the list, please contact you local dealer. (The phone

numbers below were correct at the time of going to

print. On www.sonyericsson.com you can always

find the latest updates.)

Sony Ericsson Consumer Web site,

service and support, safe and efficient

use, end user licence agreement,

warranty, declaration of conformity.

Sony Ericsson Consumer Web site

On www.sonyericsson.com/support

there is a support section where help

and tips are only a few clicks away.

Here you will find the latest computer

software updates and tips on how to

use your product more efficiently.

In the unlikely event that your product needs service

please contact the dealer from whom it was

purchased or one of our service partners. Save

your original proof of purchase, you will need it if

you need to claim warranty.

For a call to one of our Call Centers you will be

charged according to national rates, including local

taxes, unless the phone number is a toll-free

number.

Service and support

From now on you will have access to a portfolio

of exclusive service advantages such as:

Global and local websites providing support.

A global network of Call Centers.

An extensive network of Sony Ericsson service

partners.

A warranty period. Learn more about the warranty

conditions in this user guide.

•

country

Australia

Argentina

Austria

Belgium

Brazil

Canada

Central Africa

Chile

phone number

1-300 650 050

800-333-7427

0810 200245

02-7451611

email address

4001-0444

1-866-766-9374

+27 112589023

123-0020-0656

4008100000

18009122135

062 000 000

China

Colombia

Croatia

Important information

Czech Republic

Denmark

Finland

France

Germany

Greece

844 550 055

33 31 28 28

09-299 2000

0 825 383 383

0180 534 2020

801-11-810-810

210-89 91 919 (from mobile)

8203 8863

Hong Kong

Hungary

India

06 1 437 7300

39011111 (Add STD code when dialling from a GSM connection)

Indonesia

Ireland

Italy

Malaysia

Mexico

021-2701388

1850 545 888

06 48895206

1-800-889900

01 800 000 4722 (national toll free number)

Netherlands

New Zealand

Norway

Philippines

Poland

Portugal

Romania

Russia

Singapore

Slovakia

South Africa

Spain

Sweden

Switzerland

Taiwan

Thailand

Turkey

Ukraine

United Arab Emirates

United Kingdom

0900 899 8318

0800-100150

815 00 840

02-6351860

0 (prefix) 22 6916200

808 204 466

(+4021) 401 0401

8(495) 787 0986

67440733

02-5443 6443

0861 632222

902 180 576

013-24 45 00

0848 824 040

02-25625511

02-2483030

0212 47 37 777

(+380) 44 590 1515

43 919880

08705 23 7237

Important information

United States

Venezuela

1-866-766-9374

0-800-100-2250