3-047-938-11 (1)
IC Re co rd e r
Operating Instructions
ICD-37/57/67
2000 Sony Corporation
Ta b le o f Co n t e n t s
What is an IC recorder? ................................................................................ 4
Features .......................................................................................................... 5
Ge t t in g St a rt e d
Step 1: Installing the Battery ........................................................................ 6
Step 2: Setting the Clock ............................................................................... 8
Ba sic Op e ra t io n s
Recording Messages ................................................................................... 10
Playing Back Messages ............................................................................... 13
Erasing Messages ........................................................................................ 16
Ad va n ce d Op e ra t io n s
Moving Messages to a Different File — Move Function ....................... 18
Adjusting the Playback Speed .................................................................. 19
Adding a Recording to a Previously Recorded Message ...................... 20
Playing Back a Message at a Desired Time with an Alarm ................... 21
Preventing Accidental Operation — HOLD function ........................... 25
Me n u Se t t in g s
Turning off the Beep Sound ....................................................................... 26
Selecting the Microphone Sensitivity ....................................................... 27
Playing Back All Messages in a File Continuously ................................ 28
Ad d it io n a l In fo rm a t io n
Precautions ................................................................................................... 29
Troubleshooting ........................................................................................... 30
Specifications ............................................................................................... 31
Index to Parts and Controls ....................................................................... 32
Menu map .................................................................................................... 34
Index .............................................................................................. Back cover
Notes
• The illustrations in this manual are those of ICD-57.
• The display in the display window may be different from the illustrations in
the manual depending on the models or operating conditions.
3
Wh a t is a n IC re co rd e r?
This IC recorder enables you to record and play back oral messages in the
built-in IC memory.
z Re co rd in g
When a new message is recorded, it is automatically added after the last
recorded messages.
Unlike with tape recorders, you do not need to worry about recording over
previously recorded messages by mistake.
Since you do not need to search for the end of the last recording, you can
start recording quickly whenever you wish.
12:00, November 1
10:00, November 2
11:30, November 1
Meet Mr. Brow n at
Don’t forget
to call Mary
Make remittance
at ABC bank
2 p.m. tomorrow .
Message 1 Message 2 Message 3
9:00, November 4
Send a card to
Miss Smith
Message 1 Message 2 Message 3 Message 4
z Pla yb a ck
With this IC recorder, you can quickly locate the message you want to play
back.
Reviewing the current recording is also very easy.
z Era sin g
You can quickly erase unwanted messages with an easy operation. When a
message is erased, the next message automatically advances, leaving no
blank space.
Message 1 Message 2 Message 3 Message 4 Message 5
Erase Message 3
Before
After Message 1 Message 2 Message 3 Message 4
Remaining messages
are renumbered.
4
Fe a t u re s
• 45 minutes (ICD-37)/90 minutes (ICD-57)/180 minutes (ICD-67)
recording time
This unit is useful for recording messages or appointments.
• Organizing message files
You can choose among 3 different files to record and store your
messages.
You can easily move messages from one file to another (see page 18).
Up to 99 messages can be recorded in each file.
• Alarm function
You can start playing back a desired message with an alarm on a desired
date and time (see page 21). You can use this function to remind you of
the time of the meeting, etc.
• Playback speed control
You can play back messages rapidly (+50%) or slowly (–25%) (see page
19). This is useful when playing back a long recording. The sound pitch
will be automatically adjusted when you change the playback speed.
• Adding a recording to previously recorded message
You can add a recording to the message being played back to count as
one message (see page 20).
5
St e p 1: In st a llin g t h e Ba t t e ry
Slide and lift the battery
compartment lid.
1
2
1
Insert a LR03 (size AAA)
alkaline battery with correct
polarity, and close the lid.
2
To t a ke o u t t h e b a t t e ry
Take out the battery by pushing
the # side of it as illustrated.
If the battery compartment
lid is accidentally detached,
attach it as illustrated.
2
1
6
Clock setting display appears when you insert battery for the first time, or
when you insert battery after the unit has been without battery for a
certain period of time. Please refer to Steps 2 to 4 in “Step 2: Setting the
Clock” on pages 8 and 9 to set the date and time.
Re p la cin g t h e b a t t e ry
“E“ appears on the display when the battery becomes weak and it flashes
when the battery is exhausted. Replace the battery with a new one.
Ba t t e ry life *
With continuous use, approx. 5 hours recording/ 4.5 hours playback
* Using Sony alkaline battery LR03 (SG), playing back through the internal
speaker with VOL control at around 3
The battery life may shorten depending on the operation of the unit.
Notes
• Do not use manganese batteries for this unit.
• When you replace the battery, insert the new one within 3 minutes after you
removed the exhausted one. Otherwise, the display may show the clock
setting display or incorrect date and time when you reinsert the battery. In this
case, set the date and time again.
The recorded messages, however, will remain.
• Do not charge a dry battery.
• When you are not going to use the unit for a long time, remove the battery to
prevent damage from battery leakage and corrosion.
7
St e p 2: Se t t in g t h e Clo ck
Clock setting display appears when you insert battery for the first time, or
when you insert battery after the unit has been without battery for a
certain period of time. In this case, proceed from Step 2.
Display the clock setting display.
1
2 Press –. once to display
“SET DATE”.
1 Press MENU to enter
the menu mode.*
3 Press NxPLAY/STOP.
The year digits will flash.
* The “ALARM” display may
appear instead of the “BEEP”
display (see page 34).
Set the date.
1 Press –. or >+ to select the digits of the year.
2
3 Set the month and day in
sequence, then press
NxPLAY/STOP.
The hour
2 Press NxPLAY/STOP.
The month
digits will
digits will flash.
flash.
8
Set the time.
1 Press –. or >+ to select the digits of the hour.
3
3 Set the minute.
2 Press NxPLAY/STOP.
The minute digits will flash.
4 Press NxPLAY/STOP at the
time signal.
The display will return to
“SET DATE”.
Exit from the menu mode.
4
Press MENU.
9
Ba sic Op e ra t io n s
Re co rd in g Me ssa g e s
You can record up to 99 messages in each file (A, B and C).
Since a newly recorded message is automatically added behind the last
recorded message, you can start recording quickly without searching for
the end of the last recording.
Message 1 Message 2 New ly recorded message Blank space
e.g.
Select the file.
1
Current file
Press FILE repeatedly until
the desired file is
displayed.
Start recording.
2
1 Press REC START/STOP.
2 Speak to the built-in
microphone.
Current message
number
OPR indicator
Remaining recording time
During recording, the OPR indicator lights up in red.
You do not need to keep pressing REC START/ STOP while recording.
10
Stop recording.
3
Press REC START/STOP again.
The unit stops at the beginning
of the current recording.
STOP
If you do not change the file after you stop recording, the next time you record
you will record in the same file.
To list e n t o t h e cu rre n t re co rd in g
Press REC START/ STOP to stop recording, then press NxPLAY/ STOP.
To re vie w t h e cu rre n t re co rd in g in st a n t ly
Press NxPLAY/ STOP during recording.
To st o p re co rd in g
You can also stop recording by pressing STOP instead of REC START/
STOP.
To d isp la y t h e re m a in in g re co rd in g t im e
During recording, the remaining recording time is displayed under
REMAIN.
To display it during stop, press STOP for more than one second.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downl1oa1d.
Re co rd in g Me ssa g e s (co n t in u e d )
1
Tips
•
You can record for up to 45 minutes (ICD-37)/ 90 minutes (ICD-57)/
180 minutes (ICD-67).
•
You can select the microphone sensitivity. See page 27.
Notes
• When the remaining time of recording reaches 1 minute, the remaining time
and “END” will flash one after the other in the display window. When the
memory is full, recording automatically stops and “FULL” will flash in the
display window with an alarm sound. To continue recording, first erase some
of the messages (see page 16).
• If you press REC START/ STOP when the memory is full, “FULL” will flash
with an alarm sound. Erase some of the messages before you start recording
again (see page 16).
• If you press REC START/ STOP after you have recorded 99 messages, “FULL”
will flash with an alarm sound. Select another file or erase some of the
messages (see page 16).
Note on recording
Noise may be recorded if an object, such as your finger, etc., accidentally rubs
or scratches the unit during recording.
12
Pla yin g Ba ck Me ssa g e s
When playing back a previously recorded message, start from Step 1.
When playing back a message you have just finished recording, start from
Step 3.
Select the file.
1
Current file
Press FILE repeatedly
until the desired file is
displayed.
Select the message number.
2
Selected message number
Press –. or >+ to
display the desired
message number.
Total number of
messages in the
current file
for larger
message
number
for smaller
message
number
Continued
Download from Www.Somanuals.com. All Manuals Search And Downl1oa3d.
Pla yin g Ba ck Me ssa g e s (co n t in u e d )
Start playback.
3
Press NxPLAY/STOP.
OPR indicator
Date of recording
Time of recording
During playback, the OPR indicator lights up in green.
After playing back one message, the unit stops at the beginning of the next
message.
When the last message on a file has been played back, the unit stops at the
beginning of the last message.
Adjust the volume.
4
Turn VOL.
14
To st o p p la yb a ck
To
Do this
stop at the beginning of
the current message
Press STOP.
stop at the current position Press NxPLAY/ STOP.
(Playback Pause function) To resume playback from that point,
press NxPLAY/ STOP again.
Ot h e r o p e ra t io n s
To
Do this
skip to the next message
Press >+.
Press –..
skip to the previous
message
search forward during
playback
Keep >+ pressed.
search backward during
playback
Keep –. pressed.
Pla yin g b a ck a m e ssa g e re p e a t e d ly — Re p e a t
Pla y
During playback, press NxPLAY/ STOP for more than one second.
“
“ will be displayed and the selected message will be played back
repeatedly until you stop playback by pressing STOP.
Pla yin g t h e b e g in n in g o f e a ch m e ssa g e —
Sca n n in g Pla y
During stop mode, press NxPLAY/ STOP for more than one second.
“SCAN” will be displayed in the display window and the first 5 seconds of
each message in the selected file will be played back.
When you find the desired message, press NxPLAY/ STOP. The message
will be played back until the end.
Fo r p riva t e list e n in g
Connect an earphone (not supplied) to the EAR jack.
Download from Www.Somanuals.com. All Manuals Search And Downl1oa5d.
The built-in speaker will be automatically disconnected.
Era sin g Me ssa g e s
You can erase the recorded messages one by one or all messages in a file at
a time.
Note that once a recording has been erased, you cannot retrieve it.
Erasing messages one by one
When a message is erased, the remaining messages will advance and
renumbered so that there will be no space between messages.
Message 1 Message 2 Message 3 Message 4 Message 5
Before erasing
After erasing
Erase Message 3
Message 1 Message 2 Message 3 Message 4
Remaining messages are renumbered.
1 Press ERASE w hile playing back the message you
w ant to erase or press ERASE for more than 1
second during stop mode.
A beep will sound and the message number and
“ERASE” will flash while the first and last 5 seconds
of the message is played back 10 times.
2 Press ERASE w hile the message is being played
back.
The message is erased and the remaining messages
will be renumbered.
To ca n ce l e ra sin g
Press STOP before step 2.
To e ra se o t h e r m e ssa g e s
Repeat steps 1 and 2.
16
Erasing all messages in a file
e.g.
File A
File B
Message
1
Message
2
Message
3
Blank space
Message
1
Message
2
Message
Message
3
3
Blank space
Message
1
Message
2
1 Press FILE to select
the file you w ant to
erase.
2 Press ERASE and STOP
at the same time for
more than 1 second.
The file, the message
number and “ALL
ERASE” will flash.
3 Press ERASE.
To ca n ce l e ra sin g
Press STOP before step 3.
Download from Www.Somanuals.com. All Manuals Search And Downl1oa7d.
BAd va n ce d Op e ra t io n s
Mo vin g Me ssa g e s t o a Diffe re n t File —
Mo ve Fu n ct io n
You can move recorded messages to a different file.
FILE
NxPLAY/STOP
e.g. To move the seventh message in the file A to the file C
1
Play back the message you w ant to
move.
2
Press FILE during playback to select the
file you w ant to move the message to.
The file and “MOVE” will flash and the first
and last 5 seconds of the message will be
played back 10 times.
3
Press NxPLAY/STOP.
To ca n ce l m o vin g t h e m e ssa g e (s)
Press STOP before Step 3.
18
Notes
• The move function does not duplicate a message in another file. When you
move a message to another file, the one in the previous file will be deleted.
• If you do not press NxPLAY/ STOP while the first and last 5 seconds of the
message are played back, the display will return to the REMAIN display. In
this case, start the procedure from the beginning.
Ad ju st in g t h e Pla yb a ck Sp e e d
You can adjust the speed of the playback with the use of the PLAY SPEED
selector on the bottom.
PLAY SPEED selector
PLAY SPEED
SLOW NORMAL FAST
To p la y b a ck ra p id ly
Set PLAY SPEED to FAST.
“FAST” will flash three times in the display
window and the playback speed will
increase about 50%.
To p la y b a ck slo w ly
Set PLAY SPEED to SLOW.
“SLOW” will flash three times in the display
window and the playback speed will
decrease about 25%.
To p la y m e ssa g e s w it h n o rm a l sp e e d
Set PLAY SPEED to NORMAL.
Download from Www.Somanuals.com. All Manuals Search And Downl1oa9d.
Ad d in g a Re co rd in g t o a Pre vio u sly
Re co rd e d Me ssa g e
You can add a recording to the message being played back.
The added recording will be placed after the current message and counted
as a part of the message.
During playback
of Message 3
Message 3
Message 4
After adding
a recording
Message 3
Message 4
Added recording
Meeting at 2 o’clock
on December 1.
at Conference
room A
Built-in microphone
STOP
REC
START/STOP
1
2
During playback, press REC
START/STOP for more than 1 second.
The OPR indicator lights in red and
“R-PLUS” flashes three times.
Speak into the built-in microphone.
The display will then change to the
remaining recording time.
Press REC START/STOP again to stop
the recording.
To st o p re co rd in g
You can also stop recording by pressing STOP instead of REC START/
STOP.
20
Pla yin g Ba ck a Me ssa g e a t a De sire d
Tim e w it h a n Ala rm
You can sound an alarm and start playback of a selected message at a
desired time.
FILE
MENU
NxPLAY/STOP
–./ >+
Display w indow
1
2
Use FILE and –./>+ to select the
file and the message you w ant to play
back.
Enter the alarm setting mode.
1 Press MENU.
The unit enters the menu mode and
“ALARM OFF” will be displayed.
(If “ALARM On” is displayed, the alarm has
been set. If you do not wish to change the
setting, press MENU and exit the menu
mode.)
Note
“ALARM OFF (or On)” will not appear and the alarm cannot be set if
the clock has not been set or no message has been recorded in the
selected file.
2 Press NxPLAY/STOP.
“OFF” starts to flash.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downl2oa1d.
Pla yin g Ba ck a Me ssa g e a t a De sire d Tim e w it h a n
Ala rm (co n t in u e d )
3 Press –. or >+ to flash “On”.
4 Press NxPLAY/STOP.
“DATE” will flash in the display window.
3
Set the alarm date.
• t o p la y b a ck o n a d e sire d d a t e
(the message will be played back at the
same time on the same date every year
until you erase the message)
1 Press NxPLAY/STOP w hen “DATE”
flashes.
The month digits will flash.
2 Press –. or >+ to select the month
digits and press NxPLAY/STOP.
The day digits will flash.
3 Press –. or >+ to select the day digits.
• t o p la y b a ck o n ce a w e e k
Press –. or >+ to select the day of the
w eek.
22
• t o p la y b a ck a t t h e sa m e t im e e ve ry d a y
Press –. or >+ to select “DAILY”.
4
5
Press NxPLAY/STOP.
The hour digits will flash.
Set the alarm time.
1 Press –. or >+ to select the hour
digits and press NxPLAY/STOP.
The minute digits will flash.
2 Press –. or >+ to select the minute
digits and press NxPLAY/STOP.
“ALARM On” and “,” will be displayed to
indicate that the setting has been completed.
6
Press MENU to exit the menu mode.
“,” is displayed when the number of the message with alarm setting is
selected.
At the set time, the alarm will sound for about 10 seconds and the selected
message will be played back.
During playback, “ALARM” will flash in the display window.
Playback will stop at the end of the message.
Continued
Download from Www.Somanuals.com. All Manuals Search And Downl2oa3d.
Pla yin g Ba ck a Me ssa g e a t a De sire d Tim e w it h a n
Ala rm (co n t in u e d )
To ca n ce l t h e a la rm se t t in g b e fo re t h e p la yb a ck st a rt s
Press STOP while the alarm sound is heard. You can stop even when the
HOLD function is activated.
Notes
• You cannot set the alarm if you have not set the clock or there is no message in
the selected file (the unit will not enter the alarm setting mode when you press
MENU in Step 2 on page 21).
• If you try to set the alarm to play back a message at a previously set time on
another message, “PRE SET” will be displayed, preventing new settings.
• If the alarm time comes while another message is being played back with an
alarm, the playback stops and the new message will be played back.
• If the alarm time comes during recording, alarm will sound for 10 seconds
after the recording is finished and playback begins. “,” will flash when the
alarm time comes.
• If more than one alarm time comes during recording, only the first message
will be played back.
• If the alarm time comes when the unit is in the menu mode, alarm will sound
and the menu mode will be cancelled.
• If you erase the message you set the alarm to play back, the alarm setting will
be cancelled.
• You can adjust the playback volume with the VOL control.
• If the alarm time comes during erasing, alarm will sound for 10 seconds after
the erasing is finished and playback begins.
• Alarm setting will not be cancelled when the alarm playback finishes. To
cancel alarm setting, see page 25.
24
To ca n ce l t h e a la rm se t t in g o r ch a n g e t h e a la rm t im e
1
Select the message you set the alarm to play back, and press MENU.
“ALARM On” will be displayed.
2
3
Press NxPLAY/ STOP to flash “On”.
To cancel the alarm setting: Press –. or >+ to flash “OFF” and
press NxPLAY/ STOP.
To change the alarm date and time: Press NxPLAY/ STOP. When
the alarm date is displayed, follow the steps 3 to 5 on pages 22 and 23
to change the alarm date and time.
4
Press MENU to exit the menu mode.
Pre ve n t in g Accid e n t a l Op e ra t io n —
HOLD fu n ct io n
HOLD sw itch
Slide the HOLD switch in the direction of the
arrow. “HOLD” will flash three times, indicating
that all the functions of the buttons are locked,
except for STOP to stop an alarm.
To cancel the HOLD function, simply slide the
HOLD switch in the opposite direction.
Note
When the HOLD function is activated during recording, cancel the HOLD
function first to stop recording.
Download from Www.Somanuals.com. All Manuals Search And Downl2oa5d.
BMe n u Se t t in g s
Tu rn in g o ff t h e Be e p So u n d
BEEP On: A beep will sound to indicate that operation has been
accepted.
BEEP OFF: No beep sound will be heard except for the alarm and timer.
1
Press MENU to enter the menu mode.
2
Press –. or >+ to display “BEEP
On (or OFF)” and press NxPLAY/STOP.
“On (or OFF)” will flash.
3
4
Press –. or >+ to select “On” or
“OFF” and press NxPLAY/STOP.
The setting is completed.
Press MENU to exit the menu mode.
Beep patterns
Meaning
-
(single tone)
Usual mode
--
---
(double tone)
(triple tone)
Enter/ exit special mode
Notice*
---- ---- (continuous beep) Alarm set time has come.
26
* This pattern lets you know the procedure is wrong or informs you of some
messages, such as:
- you are trying to record a message when you have already recorded up to the
maximum recordable time or the maximum number of messages.
- the unit has stopped functioning due to lack of battery power.
Se le ct in g t h e Micro p h o n e Se n sit ivit y
SENS H (high):To record at meetings or in a quiet and/ or spacious place.
SENS L (low): To record for dictation or in a noisy place.
1
2
3
4
Press MENU to enter the menu mode.
Press –. or >+ to display “SENS”
and press NxPLAY/STOP.
“H (or L)” will flash.
Press –. or >+ to select “H” or “L”
and press NxPLAY/STOP.
Now the setting is completed.
Press MENU to exit the menu mode.
Download from Www.Somanuals.com. All Manuals Search And Downl2oa7d.
Pla yin g Ba ck All Me ssa g e s in a File
Co n t in u o u sly
CONT On: You can play back all messages in a file continuously.
CONT OFF: Playback stops at the end of each message.
1
2
3
4
Press MENU to enter the menu mode.
Press –. or >+ to display “CONT”
and press NxPLAY/STOP.
“OFF (or On)” will flash.
Press –. or >+ to select “On” or
“OFF” and press NxPLAY/STOP.
Now the setting is completed.
Press MENU to exit the menu mode.
28
BAd d it io n a l In fo rm a t io n
Pre ca u t io n s
On p o w e r
• Operate the unit only on 1.5 V DC. Use one LR03 (size AAA) alkaline
battery.
On sa fe t y
• Do not operate the unit while driving, cycling or operating any
motorized vehicle.
On h a n d lin g
• Do not leave the unit in a location near heat sources, or in a place subject
to direct sunlight, excessive dust or mechanical shock.
• Should any solid object or liquid fall into the unit, remove the batteries
and have the unit checked by qualified personnel before operating it any
further.
On n o ise
• Noise may be heard when the unit is placed near an AC power source, a
fluorescent lamp or a mobile phone during recording or playback.
• Noise may be recorded when an object, such as your finger, etc., rubs or
scratches the unit during recording.
On m a in t e n a n ce
• To clean the exterior, use a soft cloth slightly moistened in water. Do not
use alcohol, benzine or thinner.
Keep personal credit cards using magnetic coding or spring-wound
watches, etc., away from the unit to prevent possible damage from the
magnet used in the speaker.
If you have any questions or problems concerning your unit, please
consult your nearest Sony dealer.
Ba cku p re co m m e n d a t io n s
To avoid potential risk of data loss caused by accidental operation or
malfunction of the IC recorder, we recommend that you save a backup
copy of your recorded messages on a tape recorder, etc.
Download from Www.Somanuals.com. All Manuals Search And Downl2oa9d.
Tro u b le sh o o t in g
Should any problem persist after you have made these checks, consult
your nearest Sony dealer.
Symptom
Remedy
The unit does not
operate.
• The battery has been inserted with incorrect
polarity.
• The battery is weak.
• The buttons are locked with the HOLD
switch. (If you press any button, “HOLD”
will flash three times.)
No sound comes
from the speaker.
• The earphone is plugged in.
• The volume is turned down completely.
“FULL” is displayed • The memory is full. Erase some of the
and you cannot start
recording.
messages. See page 16.
• 99 messages have been recorded in the
selected file. Select another file or erase some
of the messages. See page 16.
Noise is heard.
• An object, such as your finger, etc.,
accidentally rubbed or scratched the unit
during recording so that noise was recorded.
• The unit was placed near an AC power
source, a fluorescent lamp or a mobile phone
during recording or playback.
• Earphone plug is dirty. Clean the plug.
Recording level is
low.
• Microphone sensitivity is set to “SENS L”.
Set it to “SENS H”. See page 27.
• Set the PLAY SPEED switch to “NORMAL”.
See page 19.
Playback speed is too
fast or too slow.
“--M--D --:--” is
displayed.
• You have not set the clock. See page 8.
“--M--D” is displayed • The date of recording will not be displayed if
on the REC DATE
display.
you recorded the message when the clock
was not set.
The unit does not
operate correctly.
• Take out the battery and insert it again.
30
Sp e cifica t io n s
Recording media
Recording time
Built-in flash memory, Monaural recording
ICD-37: 45 minutes
ICD-57: 90 minutes
ICD-67: 180 minutes
Frequency response
Speaker
Power output
Output
280 Hz - 2 800 Hz
approx. 3.6 cm (1 7⁄16 in.) dia.
80 mW
Earphone jack (mini jack) for 8 - 300 Ω earphone
FAST: +50%
Playback speed control
SLOW: –25%
Power requirements
One LR03 (size AAA) alkaline battery: 1.5 V DC
Dimensions (w/ h/ d) (not incl. projecting parts and controls)
9
58.0 × 83.5 × 14.2 mm (2 3⁄8 × 3 3⁄8 × ⁄16 in.)
Mass (incl. battery)
Supplied accessories
ICD-37: 56 g (1.98 oz)
ICD-57/ 67: 57 g (2.01 oz)
LR03 (size AAA) alkaline battery × 1
(tourist model and ICD-57/ 67 for U.S.A. only)
Handstrap (attached to the unit) × 1
(ICD-57/ 67 only)
Optional accessories
Active speakers SRS-T1
Your dealer may not handle some of the above listed optional accessories.
Please ask the dealer for detailed information.
Design and specifications are subject to change without notice.
Download from Www.Somanuals.com. All Manuals Search And Downl3oa1d.
In d e x t o Pa rt s a n d Co n t ro ls
Refer to the pages indicated in parentheses for details.
Ma in u n it
1
2
3
4
9
q;
qa
qs
qd
qf
qg
5
6
7
8
qh
1 VOL (volume) control (14)
2 FILE button (10, 13, 18)
3 MIC (built-in microphone)
(10)
9 MENU button (8, 21, 34)
0 Display window (33)
qa OPR (operation) indicator
(10, 14)
4 NxPLAY/ STOP (play/
stop• enter) button (8, 14, 15)
5 –./ >+ (fast forward/
fast backward• selection of
menu mode) button (13, 15)
6 STOP button (11)
qs ERASE button (16)
qd REC (record) START/ STOP
button (10)
qf Speaker
qg EAR (earphone) jack (15)
qh Hand strap (supplied to
ICD-57/ 67 only)
7 HOLD switch (25)
8 PLAY SPEED selector (19)
32
Disp la y w in d o w
1
2
5
6
7
8
9
3
4
1 Total number of messages in
a file (13)
5 Alarm indicator (23)
6 Battery exhausted indicator
(7)
7 Repeat play indicator (15)
8 REMAIN indication (10)
9 REC DATE indication (14)
Mode indication of the
menu(21, 26 - 28) (On, OFF,
etc.)
2 File indication (10, 13)
3 Current message number (10,
13)
4 Remaining recording time
indication (10)
Recording date indication
(14)
Current time/ day indication
(8)
Menu indication (8, 21, 26 -
28, 34) (ALARM, etc.)
Messages (ERASE, SCAN,
etc.)
Download from Www.Somanuals.com. All Manuals Search And Downl3oa3d.
Me n u m a p
Press MENU to enter
the menu mode.
: Initial seItting
On
ALARM*
(See page 21.)
OFF
On
BEEP
(See page 26.)
OFF
H
L
SENS
(See page 27.)
On
CONT
(See page 28.)
OFF
SET DATE
(See page 8.)
Year Month
Day
Hour
Minute
* The “ALARM” display will not appear if you have not set the date and time or if there is no
recorded message.
34
Month
Day
Hour
Minute
DATE
Hour
Hour
Hour
Hour
Hour
Hour
Hour
Hour
Minute
Minute
Minute
Minute
Minute
Minute
Minute
Minute
SUN
MON
TUE
WED
THU
FRI
SAT
DAILY
Download from Www.Somanuals.com. All Manuals Search And Downl3oa5d.
In d e x
A
J, K, L, M, N, O
Accidental operation .................... 25
Alarm .............................................. 21
Menu ..................................... 8, 21, 34
Message, erasing ........................... 16
Message, playing back ................. 13
Message, recording ....................... 10
Message number ........................... 10
Microphone, built-in .................... 10
Microphone sensitivity ................ 27
Move ............................................... 18
B
Battery .............................................. 6
Beep ................................................ 26
Built-in microphone ..................... 10
C
P, Q
Clock setting .................................... 8
Playback ......................................... 13
Playback Pause function .............. 15
Playback speed .............................. 19
D
Display window ........................... 33
R
E
Recording ....................................... 10
Remaining time ............................. 10
Repeat play .................................... 15
Earphone ........................................ 15
Erase ............................................... 16
F, G
S, T, U
Fast backward ............................... 15
Fast forward .................................. 15
File ................................ 10, 13, 17, 18
Scanning play ................................ 15
Stop ........................................... 11, 15
V, W, X, Y, Z
H
Volume control ............................. 14
Hold ................................................ 25
I
IC memory ....................................... 4
Sony Corporation
Printed in Japan
|