Sony MP3 Docking Station ICF CS15IP User Manual

Even if the alarm setting for iPod is complete, if  
you turn the iPod touch/iPhone power off after  
inserting the iPod touch/iPhone into the unit,  
the alarm will be the buzzer.  
To deactivate the App’s link function: Remove  
your iPod/iPhone from the dock connector.  
Press (to enter the iPod function), and then  
press and hold VOLUME – and   
simultaneously for at least 2 seconds. (“OFF”  
appears in the display to show that the App’s  
link function has been deactivated.)  
Repeat the above steps to activate the function.  
(“ON” appears in the display to show that the  
App’s link function has been activated.)  
3 Press PRESET + or to select the preset  
To play back  
To change the sleep timer  
setting  
4-286-722-11(1)  
Remote commander  
number, then press DSPL/ENT on the  
1 Set your iPod on the dock connector.  
unit.  
Before using the supplied remote for the first  
time, remove the insulation film.  
Aim the remote at the (Remote sensor) of the  
unit.  
The dock connector can be tilted slightly.  
You can press SLEEP repeatedly to select the  
desired sleep timer setting, even after the sleep  
timer has been activated.  
Example: The following displays appear  
when you preset FM 89.8 MHz to  
preset number 1 for FM.  
To set the radio alarm  
Perform steps 1 to 8 in “To set the alarm.”  
1
To deactivate the sleep timer  
2 Press ALARM SET A or B to select  
Press SLEEP repeatedly to set the sleep timer to  
Personal Audio Docking System  
radio band (“FM” or AM”).  
“OFF” in step 2.  
Preset number flashes in the display.  
3 Press TIME SET + or to select the  
Additional Information  
Troubleshooting  
desired preset number corresponding the  
Connecting optional  
components  
To listen to sound  
bands or “– –.”  
Reference Guide US  
“– –” is the last station received.  
2 Press .  
4 Press ALARM SET A or B.  
Should any problem persist after you have made  
the following checks, consult your nearest Sony  
dealer.  
The iPod begins to play back.  
You can operate the connected iPod via this  
unit or the iPod itself.  
The volume level flashes in the display.  
5 Press TIME SET + or to adjust the  
1 Firmly connect the line output jack of a  
portable digital music player (or other  
component) to the AUDIO IN jack on the  
back of the unit using a suitable  
The display shows the frequency for about  
10 seconds, and then returns to the current  
time.  
volume.  
3 Adjust the volume using VOLUME + or –  
The clock flashes “AM 12:00” due to a power  
interruption.  
6 Press ALARM SET A or B.  
(VOL + or on the remote).  
The setting is entered.  
Notes  
The battery is low. Replace the battery. Remove  
the old battery and install a new one.  
Supporter  
To remove an iPod  
7 If A” or “B” does not appear in the  
To preset another station, repeat these steps.  
To cancel the preset number setting, press  
connecting cable.  
When placing or removing the iPod, hold it at the  
same angle as the dock connector on the unit. Do  
not pull the iPod forward too far.  
display, press ALARM SET A or B  
The alarm of radio, iPod or buzzer does not  
sound at the preset alarm time.  
2 Press AUDIO IN to display AUDIO IN.”  
3 Turn the connected component on.  
4 Play the connected component.  
The sound from the connected component is  
output from the speakers of this unit.  
MODE again.  
again.  
If you store another station with the same  
preset number, the previously stored station  
will be replaced.  
Check that alarm A” or alarm “B” is properly  
displayed.  
The radio will turn on at the set time.  
Power cord  
To set the buzzer alarm  
Dream Machine is a trademark of Sony Corporation.  
Auto Time Set is a trademark of Sony Corporation.  
The alarm of radio or iPod is activated but no  
sound comes on at the preset alarm time.  
The VOL + and buttons have a tactile dot.  
1
Perform steps 1 to 8 in “To set the alarm.”  
To tune in to a preset station  
1 Follow steps 1 to 2 in “Manual tuning”  
and select the AM or FM band.  
2 Press PRESET + or to select the desired  
preset number.  
OFF  
Check the alarm volume setting.  
5
Adjust the volume using VOLUME + or –  
(VOL + or on the remote).  
Remote sensor  
2 Press ALARM SET A or B to select  
Terminate the current function and stop  
“BUZZER” alarm mode.  
There is no sound from the iPod.  
playback.  
The setting is entered.  
Make sure the iPod is securely connected.  
Adjust the VOLUME +/– (VOL +/– on the  
remote).  
FM wire antenna  
Stop a currently sounding alarm/snooze timer.  
To return to the radio  
3 If A” or “B” does not appear in the  
(Play/Pause)  
Press RADIO BAND.  
display, press ALARM SET A or B  
Start playing the iPod. Press again to pause/  
The preset number followed by then the  
frequency of the last station appears in the display.  
3 Adjust the volume using VOLUME + or –  
The iPod cannot be operated with this unit.  
Make sure the iPod is securely connected.  
again.  
resume playback.  
(VOL + or on the remote).  
The buzzer will sound at the set time.  
Notes  
Press and hold to turn off the iPod.  
An iPod in a case or cover can be set in this  
Note  
The iPod cannot be charged.  
Make sure the iPod is securely connected.  
To return to the iPod  
(Forward)  
–Auto preset tuning  
unit. However, if the case or cover interferes  
with connection, remove the case or cover  
before setting the iPod on the dock connector.  
The volume cannot be set for the buzzer alarm.  
Press .  
Go to the next track.  
1 Follow steps 1 to 2 in “Manual tuning”  
When daylight saving time (summer time)  
begins, the clock does not employ the  
daylight saving time (summer time)  
automatically.  
Press and hold while listening to the sound to  
To confirm an alarm time  
setting  
and select the AM or FM band.  
To stop listening  
locate a desired point.  
When placing or removing the iPod, hold the  
iPod at the same angle as that of the connector  
on this unit, and do not twist or bend the iPod  
as it may result in connector damage.  
Remove the iPod when transporting it,  
otherwise a malfunction may result.  
Press and hold in pause while observing the  
No Power No Problem is a trademark of Sony Corporation.  
2 Press and hold RADIO BAND until AP”  
flashes in the display.  
3 Press DSPL/ENT on the unit.  
The unit automatically presets the available  
channels in order.  
Press OFF/ALARM RESET (OFF on the remote),  
Press TIME SET + or . The setting will be  
display on iPod to locate a desired point.  
and stop playback on the connected component.  
Make sure the clock is set correctly.  
displayed for about 4 seconds.  
Notes  
Printed in China  
(Backward)  
©2011 Sony Corporation  
Press and hold CLOCK and SNOOZE/  
BRIGHTNESS on the unit simultaneously for at  
least 2 seconds to activate the Auto DST/  
summer time function.  
The necessary type of audio connecting cable  
depends on the optional component. Make sure  
to use the correct type of cable.  
Go back to the previous track. During  
To change an alarm setting  
The VOLUME + and buttons have a tactile dot.  
playback, this operation returns to the  
beginning of the current track. To go back to  
the previous track, press twice.  
When placing or removing the iPod, hold the  
unit securely.  
Press and hold TIME SET + for at least 2 seconds  
to move the alarm time forwards. Press and hold  
TIME SET – for at least 2 seconds to move the  
alarm time back.  
Tip  
ICF-CS15iP  
If the volume level is low, adjust the volume of  
the unit first. If the volume is still too low,  
adjust the volume of the connected component.  
Disconnect the audio connecting cable when it  
is not in use.  
When you listen to the radio with optional  
component connected, turn off the connected  
component to prevent noise. If noise occurs,  
even when the component is turned off,  
disconnect and place the optional component  
away from the unit.  
To stop auto preset tuning, press RADIO BAND.  
If the battery of your iPod is extremely low,  
charge it for a while before operation.  
If your iPod cannot reach the supporter located  
in front of the unit, attach the supplied cushion  
below the supporter.  
Press and hold while listening to the sound to  
locate a desired point.  
Press and hold in pause while observing the  
display on iPod to locate a desired point.  
To display the preset number and  
When you release the button, the changed time  
will flash for about 2 seconds. To change the  
alarm time again, press TIME SET + or within  
these 2 seconds, otherwise the setting change will  
be fixed as displayed.  
Specifications  
AUDIO POWER SPECIFICATIONS  
POWER OUTPUT AND TOTAL HARMONIC  
DISTORTION:  
With 6 ohm loads both channels driven, from  
150 Hz - 10,000 Hz; rated 3 watts per channel  
minimum RMS power, with no more than 10%  
total harmonic distortion.  
frequency of the current station  
Press DSPL/ENT on the unit once for the preset  
number, and press it again for the frequency.  
If you press DSPL/ENT on the unit once only, the  
display shows the preset number for about  
2 seconds, then changes to the frequency.  
After a few moments, the display returns to the  
current time.  
3 Press TIME SET + or repeatedly to  
Important Safety  
Operations  
select the number as follows:  
If the iPod is already playing when set onto the  
unit, the sound from the iPod will be output  
from the unit speakers, even if the unit was  
playing sound from another function.  
Sony cannot accept responsibility in the event  
that data recorded to an iPod is lost or damaged  
when using an iPod connected to this unit.  
For details of environmental conditions for  
operating your iPod, check the website of Apple  
Inc.  
Instructions  
(Up)/(Down)  
1) Read these instructions.  
Select a menu item or track for playback.  
Area number Time zone  
2) Keep these instructions.  
English  
Power source  
No Power No Problem system  
This unit contains a CR2032 battery as a backup  
power source to keep the clock and the alarm  
operating during a power interruption.  
MENU  
1
Atlantic standard Time  
Eastern standard Time  
3) Heed all warnings.  
To doze for a few more  
minutes  
Go back to the previous menu.  
Press and hold to go back to the main menu.  
4) Follow all instructions.  
2
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
(default setting)  
Press SNOOZE/BRIGHTNESS on the unit.  
The sound turns off but will automatically come  
on again after about 10 minutes.  
Time display  
Owners Record  
ENTER  
7) Do not block any ventilation openings.  
Install in accordance with the manufacturers  
instructions.  
e model number and the serial number are located on the  
bottom.  
To improve reception  
12-hour system  
3
4
5
6
7
Central standard Time  
Mountain standard Time  
Pacific standard Time  
Yukon standard Time  
Hawaiian standard Time  
Execute the selected menu item or begin  
playback.  
Other useful functions  
FM: Extend the FM wire antenna fully to increase  
reception sensitivity.  
iPod  
Record the serial number in the space provided below. Refer  
to them whenever you call upon your Sony dealer regarding  
this product.  
You can change the snooze time by pressing  
SNOOZE/BRIGHTNESS on the unit repeatedly  
within 4 seconds.  
The maximum length of the snooze time is  
60 minutes.  
DC out: 5 V  
MAX: 1 A  
When to replace the battery  
8) Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
SOUND  
AM: Connect the supplied AM loop antenna to  
the unit. Rotate the antenna horizontally for  
optimum reception.  
To enjoy the bass or  
When the battery becomes weak, “” appears in  
the display.  
Select the desired sound effect(s). (For details,  
see “To enjoy the bass or expansion sound  
effect.”)  
Radio  
Frequency range  
expansion sound effect  
Model No. ICF-CS15iP  
Playing the radio  
If a power interruption occurs while the battery is  
weak, the current time and alarm will be erased.  
Replace the battery with a Sony CR2032 lithium  
battery. Use of another battery may cause a fire or  
explosion.  
Four levels of sound effect are available by  
pressing SOUND.  
Serial No.________________________________  
9) Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your safety.  
If the provided plug does not fit into your  
outlet, consult an electrician for replacement  
of the obsolete outlet.  
10)Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit  
from the apparatus.  
11)Only use attachments/accessories specified by  
the manufacturer.  
Notes on radio reception  
10  
20  
30  
Band Frequency  
Channel step  
VOL +/− (Volume plus/minus)  
4 Press DSPL/ENT to set.  
To connect the AM loop  
antenna  
Each time you press the button, the sound effect  
changes as follows:  
Do not place the AM loop antenna near the  
power supply unit, the unit or other AV  
equipment during use, as noise may result.  
Keep digital music players or mobile phones  
away from the AM loop antenna or the FM  
antenna, as this may lead to reception  
interference.  
When you are listening to the radio with an  
iPhone connected to the unit, interference with  
radio reception may occur.  
Adjust the volume.  
60  
50  
40  
FM  
87.5 MHz - 108 MHz 0.1 MHz  
Notes  
For customers in the USA  
Please register this product on line at  
To cancel the time zone setting, press MODE.  
Though the clock is correctly set at the factory,  
discrepancies may arise during transport or  
storage. If necessary, set the clock to the correct  
time by referring to “To set the clock manually.”  
“MEGA BASS”: Provides high quality bass sound.  
“MEGA Xpand”: Extends the sound field width.  
“MEGA BASS” and “MEGA Xpand”: Enables  
both the above effects.  
AM  
530 kHz - 1 710 kHz  
10 kHz  
RADIO BAND  
To stop the snooze timer, press OFF/ALARM  
RESET (OFF on the remote).  
Proper registration will enable us to send you  
periodic mailings about new products, services,  
and other important announcements. Registering  
your product will also allow us to contact you  
in the unlikely event that the product needs  
adjustment or modification. ank you.  
The shape and length of the antenna is designed  
to receive AM signals. Do not dismantle or roll up  
the antenna.  
Note  
Activate the radio and select a band.  
General  
Speaker  
If AM 12:00” flashes in the display when the  
PRESET +/−  
unit is connected to an AC outlet for the first  
time, the battery may be weak. In this case,  
consult your nearest Sony dealer.  
To stop the alarm  
Approx. 5.7 cm (2 1/4 inches) dia. 6 Ω  
Select the preset number or preset station. (For  
details, see “Playing the radio.”)  
To return to standard sound, press the button  
until the display(s) disappear.  
1 Remove only the loop part from the  
Press OFF/ALARM RESET (OFF on the remote)  
to turn off the alarm.  
Input  
When daylight saving time (summer  
plastic stand.  
AUDIO IN jack (ø 3.5 mm stereo minijack)  
TUNE +/−  
time) begins  
To set the brightness of the  
display  
To replace the battery  
The alarm will sound again at the same time the  
next day.  
2 Set up the AM loop antenna.  
(Refer to the Startup Guide bundled with this  
Reference Guide.)  
3 Insert the AM antenna terminal in the  
AM ANTENNA jack on the rear of the  
unit.  
To adjust the AM loop antenna  
Find a place and an orientation that provide good  
reception.  
Power output  
3.5 W + 3.5 W (at 10% harmonic distortion)  
Tune into a station when the radio is on.  
Press and hold to scan AM or FM stations.  
This model automatically adjusts for daylight  
saving time (summer time).  
When you are listening to the radio while  
charging an iPod, interference with radio  
reception may occur.  
1 Keep the AC plug connected to the AC  
outlet, remove the screw of the battery  
compartment at the bottom of the unit,  
and open the lid (see Fig. ).  
2 Remove the old battery and insert a new  
one in the battery compartment with the  
side facing up (see Fig. ).  
WARNING  
To reduce the risk of fire or electric  
shock, do not expose this apparatus to  
rain or moisture.  
To reduce the risk of fire, do not cover the  
ventilation of the apparatus with newspapers,  
tablecloths, curtains, etc. And do not place lighted  
candles on the apparatus.  
Power requirements  
Four levels of brightness are available by pressing  
” is displayed from the beginning of daylight  
To deactivate the alarm  
AUDIO IN  
120 V AC, 60 Hz  
SNOOZE/BRIGHTNESS on the unit.  
saving time (summer time) and disappears at the  
end of the daylight saving time (summer time)  
automatically.  
Activate the AUDIO IN function when an  
optional component is connected. (For details,  
see “Connecting optional components.”)  
12)Use only with the cart, stand, tripod, bracket,  
or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
For clock back up: 3V DC, CR2032 battery (1)  
Press ALARM ON/OFF A or B to turn off the  
Tip  
alarm A or B indicator from the display.  
If the FM broadcast is noisy, press MODE on  
Dimensions  
Approx. 290 mm × 165 mm × 145 mm (w/h/d)  
(11 1/2 inches × 6 1/2 inches × 5 3/4 inches)  
including projecting parts and controls  
the unit until “MONO” appears in the display,  
the radio will play in monaural and the sound  
will become clearer.  
Daylight saving time (summer time) begins at:  
Even if brightness level is set to OFF, it will  
change to Low while the alarm is occurring.  
To activate the alarm  
SLEEP  
2:00 AM on the second Sunday of March.  
Set the sleep timer. (For details, see “Setting the  
sleep timer.”)  
Press ALARM ON/OFF A or B to turn on the  
Standard time begins at: 2:00 AM on the first  
alarm A or B indicator in the display.  
Mass  
About App  
Sunday of November.  
3 Replace the battery compartment lid and  
Approx. 1.65 kg (3 lb 7 oz) including power  
To reduce the risk of fire or electric shock, do not  
expose this apparatus to dripping or splashing,  
and do not place objects filled with liquids, such  
as vases, on the apparatus.  
Tip  
Notes  
Dedicated Dock App for iPod/iPhone available at  
Apple App Store.  
supply unit  
Note  
Some operations may differ or may not be  
tighten the screw.  
Adjust the direction of the AM loop antenna for  
When alarm is set as iPod, only the buzzer  
Setting the alarm  
To cancel Auto DST/summer time adjustment  
during the daylight saving time (summer  
time) period  
Supplied accessories  
Remote commander (1)  
AM loop antenna (1)  
Cushion (1)  
the best AM broadcast sound.  
4 Press , RADIO BAND, AUDIO IN or  
SNOOZE/BRIGHTNESS on the unit to  
turn “” off in the display.  
alarm will sound if there is no iPod on the dock  
connector, music is not stored in the iPod, or  
the iPod touch/iPhone is turned off.  
Search for “D-Sappli” and download the free App  
to find out more about the functions.  
13)Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14)Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate  
normally, or has been dropped.  
For the state of California USA only  
Perchlorate Material –special handling may apply, see  
Perchlorate Material: Lithium battery contains  
perchlorate  
available on certain models of iPod.  
This unit is equipped with 3 alarm modes—iPod,  
radio and buzzer. Before setting the alarm, make  
sure to set the clock by this unit (see “To set the  
clock for the first time”).  
To remove the AM loop antenna  
Pull the AM antenna terminal while pushing up  
the terminal clamp.  
Do not install the appliance in a confined space,  
such as a bookcase or built-in cabinet.  
The Auto DST/summer time adjustment can be  
When to replace the battery  
Notes  
The alarm function works as usual on the first  
and last day of daylight saving time (summer  
time). As a result, if the Auto DST/summer  
time adjustment is set and the alarm is set at a  
time skipped when the daylight saving time  
begins, the alarm will sound; if the alarm is set  
to a time that overlaps when daylight saving  
time ends, the alarm will sound twice.  
If the same alarm time is set for both alarm A  
and B, alarm A takes priority.  
canceled.  
If the App to link with this unit is not  
downloaded to your iPod/iPhone, a pop-up  
message prompting you to download D-Sappli  
may appear repeatedly.  
Deactivate the App’s link function to stop the  
pop-up message.  
With normal use, the battery (CR2025) should  
last for about 6 months. When the remote no  
longer operates the unit, replace the battery with a  
new one.  
Design and specifications are subject to change  
without notice.  
Note  
Press and hold CLOCK and SNOOZE/  
BRIGHTNESS on the unit at the same time for at  
least 2 seconds while the clock is displayed.  
” and “OFF” appear in the display to show that  
Auto DST/summer time adjustment has been  
canceled. The display returns to the clock.  
Do not expose the batteries (battery pack or  
batteries installed) to excessive heat such as  
sunshine, fire or the like for a long time.  
When you replace the battery, do not  
To set the alarm  
1 Press and hold ALARM SET A or B.  
WAKE UP” appears and the hour flashes in  
the display.  
disconnect the plug from the AC outlet.  
Otherwise, the current date, current time,  
alarm and station presets will be erased.  
As the main plug is used to disconnect the unit  
from the mains, connect the unit to an easily  
accessible AC outlet. Should you notice an  
abnormality in the unit, disconnect the main plug  
from the AC outlet immediately.  
the side facing up  
2 Press TIME SET + or repeatedly until  
Notes  
Changes to Auto DST/summer time adjustment  
by the unit (see above) are subject to  
the desired hour appears.  
To cycle the hour rapidly, press and hold TIME  
SET + or .  
If no operation is performed while the alarm is  
occurring, the alarm will stop after about  
60 minutes.  
The unit is not disconnected from the AC power  
source (mains) as long as it is connected to the  
wall outlet, even if the unit itself has been turned  
off.  
circumstances and laws in each country/region.  
Should this interfere with desired adjustment,  
cancel the Auto DST/summer time adjustment  
and set the DST display manually as necessary.  
Customers living in a country/region that does  
not use daylight saving time (summer time)  
must cancel Auto DST/summer time  
This warranty is valid only in the United States.  
3 Press ALARM SET A or B.  
–Manual tuning  
The minute flashes.  
Note  
Note on the alarm in the event of a power  
interruption  
In the event of a power interruption, the buzzer  
alarm will last about 5 minutes if the battery is not  
weak. However, certain functions will be affected  
as follows:  
The nameplate and important information  
concerning safety are located on the bottom  
exterior.  
4 Repeat step 2 to set the minute.  
If you are not going to use the remote for a long  
time, remove the battery to avoid any damage  
that may be caused by leakage and corrosion.  
1
Press RADIO BAND to turn on the radio.  
Precautions  
5 Press ALARM SET A or B.  
2 Press RADIO BAND repeatedly to select  
To disconnect AC power, grasp the plug itself,  
not the cord.  
Since a strong magnet is used for the speaker,  
keep credit cards using magnetic coding or  
spring-wound watches, CRT-based TVs, or  
projectors, etc., away from the unit to prevent  
possible damage from the magnet.  
The days of the week flash.  
the desired band.  
You are cautioned that any changes or  
modifications not expressly approved in this  
manual could void your authority to operate this  
equipment.  
adjustment before using the unit.  
6 Repeat step 2 to set the days of the week.  
You can select the days from the following  
three options by pressing TIME SET + or :  
Every day: MON TUE WED THU FRI SAT  
SUN  
Each time you press the button, the radio  
band toggles between AM and FM as follows:  
Reset button  
To activate Auto DST/summer time adjustment  
again, press and hold CLOCK and SNOOZE/  
BRIGHTNESS on the unit at the same time for  
at least 2 seconds.  
The backlight will not light up.  
Playing an iPod  
FM  
AM  
If the alarm mode is set to iPod or radio, it will  
change to buzzer automatically.  
CAUTION  
Compatible iPod/iPhone  
models  
If OFF/ALARM RESET is not pressed, the alarm  
will sound for about 5 minutes.  
” and “On” appear in the display to show that  
Auto DST/summer time adjustment has been  
activated. The display returns to the clock.  
Do not leave the unit in a location near a heat  
source such as a radiator or airduct, or in a  
place subject to direct sunlight, excessive dust,  
mechanical vibration, or shock.  
Allow adequate air circulation to prevent  
internal heat build-up. Do not place the unit on  
a surface (a rug, a blanket, etc.) or near  
materials (a curtain) which might block the  
ventilation holes.  
Week day: MON TUE WED THU FRI  
Week end: SAT SUN  
Danger of explosion if battery is incorrectly  
replaced. Replace only with the same type.  
3 Press TUNE + or repeatedly to tune to  
the desired station.  
CR2032  
If “” appears in the display, the alarm will not  
sound in the event of a power interruption.  
Replace the battery if “” appears.  
The snooze function cannot be set during a  
power interruption.  
The compatible iPod/iPhone models are as  
follows.  
7 Press ALARM SET A or B.  
4 Adjust the volume using VOLUME + or –  
NOTE  
The alarm mode setting is entered.  
To set the clock manually  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not  
installed and used in accordance with the  
instructions, may cause harmful interference to  
radio communications. However, there is no  
guarantee that interference will not occur in a  
particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning  
the equipment off and on, the user is encouraged  
to try to correct the interference by one or more  
Update software of your iPod/iPhone to the latest  
version before using it with this unit.  
(VOL + or on the remote).  
To turn off the radio, press OFF/ALARM  
RESET (OFF on the remote).  
8 Press TIME SET + or repeatedly until  
To change the clock setting manually, operate the  
unit as follows.  
the desired alarm mode flashes.  
You can choose one of 4 settings: “iPod,” “FM,”  
AM” or “BUZZER.” Set the alarm mode as  
follows:  
During a power interruption, each alarm will  
sound at the set time only once.  
iPod touch (4th generation)  
iPod touch (3rd generation)  
iPod touch (2nd generation)  
iPod nano (6th generation)*  
iPod nano (5th generation)  
iPod nano (4th generation)  
iPod nano (3rd generation)  
iPod classic  
1 Plug in the unit.  
2 Press and hold CLOCK until the year  
–Scan tuning  
Should any solid object or liquid fall into the  
unit, unplug the unit and have it checked by  
qualified personnel before operating it any  
further.  
To reset the unit  
flashes in the display.  
The unit automatically scans for AM or FM  
stations.  
– iPod: see “To set the alarm as iPod.”  
– FM or AM: see “To set the radio alarm.”  
– BUZZER: see “To set the buzzer alarm.”  
Press the reset button with a pointed object if the  
unit fails to function properly. The current time,  
alarm and station presets, etc., will revert to their  
factory presets (see Fig. ).  
Setting the sleep timer  
3 Press TIME SET + or repeatedly to set  
the year, and then press CLOCK.  
4 Repeat step 3 to set the month, day, hour  
During a thunderstorm, do not touch the  
antenna (aerial) and plug.  
You can fall asleep to music, etc., using the sleep  
timer. The unit stops playback or radio  
automatically after a preset duration.  
1 Follow steps 1 to 2 in “Manual tuning”  
To set the alarm as iPod  
and select the AM or FM band.  
Do not touch the unit with wet hands.  
Do not place the unit anywhere near water.  
and minute.  
iPhone 4  
2 Press and hold TUNE + or .  
1
Perform steps 1 to 8 in “To set the alarm.”  
To charge your iPod  
The seconds start incrementing from zero.  
iPhone 3GS  
1 Press SLEEP while the unit is turned on.  
“SLEEP” appears and the sleep time flashes in  
the display.  
+ : scans upward through the frequency bands.  
2 Press ALARM SET A or B to select  
iPhone 3G  
NOTES ON LITHIUM BATTERY  
You can use the unit as a battery charger.  
Charging begins when the iPod is connected to  
the unit.  
Notes  
:
scans downwards through the frequency  
Wipe the battery with a dry cloth to assure a  
alarm mode for “iPod.”  
If you do not press any button for about  
bands.  
* The iPod nano 6th generation cannot be  
controlled by the remote when the command of  
MENU,” “,” “,” and “ENTER” is pressed.  
good contact.  
The volume level flashes in the display.  
1 minute while setting the clock, the clock  
setting will be canceled.  
Scanning starts from the currently-tuned  
frequency. When a station is received,  
scanning stops.  
2 Press SLEEP to set the sleep timer  
Be sure to observe the correct polarity when  
installing the battery.  
Do not hold the battery with metallic tweezers,  
otherwise a short-circuit may occur.  
The charging status appears in the display on  
iPod. For details, see the users guide of your iPod.  
of the following measures:  
3 Press TIME SET + or to adjust the  
duration.  
— Reorient or relocate the receiving antenna.  
— Increase the separation between the equipment  
and receiver.  
A 100-year calendar (2011 - 2110) is installed in  
volume.  
Each time you press SLEEP, the duration (in  
minutes) changes as follows:  
On copyrights  
the unit. When the date is set, the day of the  
week is automatically displayed.  
iPhone, iPod, iPod classic, iPod nano, and  
iPod touchare trademarks of Apple Inc.,  
registered in the U.S. and other countries.  
“Made for iPod,” and “Made for iPhone” mean  
that an electronic accessory has been designed to  
connect specifically to iPod or iPhone,  
respectively, and has been certified by the  
developer to meet Apple performance standards.  
Apple is not responsible for the operation of this  
device or its compliance with safety and  
regulatory standards. Please note that the use of  
this accessory with iPod or iPhone may affect  
wireless performance.  
3 Adjust the volume using VOLUME + or –  
4 Press ALARM SET A or B.  
— Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
(VOL + or on the remote).  
90  
60  
30  
15  
The setting is entered.  
Note  
MON = Monday, TUE = Tuesday,  
Setting the clock  
In the Reference Guide, “iPod” is used as a  
5 If A” or “B” does not appear in the  
OFF  
WED = Wednesday, THU = Thursday,  
FRI = Friday, SAT = Saturday, SUN = Sunday  
–Preset tuning  
general reference to functions on an iPod or  
iPhone, unless otherwise specified by the text  
or illustrations.  
display, press ALARM SET A or B  
— Consult the dealer or an experienced radio/TV  
technician for help.  
The display returns to current time for about  
4 seconds after you have finished the duration  
setting and released SLEEP, and then the sleep  
timer starts.  
The unit plays for the duration you set, and  
then stops.  
You can preset up to 20 FM stations and 10 AM  
stations.  
To set the clock for the first  
time  
again.  
To display the year and date  
The iPod will sound at the set time.  
During clock display, press CLOCK on the unit  
once for the date, and press it again for the year.  
After a few seconds, the display will change back  
to the current time automatically.  
WARNING  
If you have any questions or problems concerning  
your unit, please consult your nearest Sony dealer.  
When using an iPod touch/iPhone  
To preset a station  
This unit is preset to the current EST (Eastern  
Standard Time) at the factory, and is powered by a  
backup battery. All you need to do the first time is  
just plug it in and select your time zone by this  
unit.  
Replace the battery for the clock backup with a  
Sony CR2032 lithium battery, and the battery  
for the remote commander with a Sony CR2025  
lithium battery. Use of another battery may  
present a risk of fire or explosion.  
To wake up to music stored in an iPod touch/  
1 Follow steps 1 to 4 in “Manual tuning”  
and manually tune into the station you  
wish to preset.  
iPhone, connect the iPod touch/iPhone to the  
unit first, follow the steps above to set alarm  
time, and then select the music function.  
To turn off the unit before  
the preset time  
Battery may explode if mistreated. Do not  
recharge, disassemble or dispose of in fire.  
Dispose of used battery promptly. Keep away  
from children.  
2 Press and hold MODE on the unit for at  
1 Plug in the unit.  
least 2 seconds.  
Note  
The current EST (Eastern Standard Time)  
appears in the display.  
This unit is not specified for use with an iPad  
and malfunction may result if used as such.  
,
Press OFF/ALARM RESET (OFF on the remote).  
2 Press and hold MODE for at least  
2 seconds.  
This unit includes a preinstalled Sony Lithium battery (CR2032) as back-up power source for the clock, which is preset  
to EST (Eastern Standard Time) at the factory. And this battery is considered part of the product.  
Area number “2” flashes in the display.  
 

Shark Vacuum Cleaner EP908 User Manual
Sharp MiniDisc Player MD SR60E User Manual
Soehnle Scale Atlantic User Manual
Sony Camera Accessories SAL50F14Z User Manual
Sony DVD Player Model HTP 36DW User Manual
Sony Stereo Amplifier XM ZR1252 User Manual
Speed Queen Washer Dryer CL8761 User Manual
Stanley Black Decker Food Saver GT18B01 User Manual
Sungale Digital Photo Frame CD806 User Manual
Tandy Cell Phone Accessories 23 401 User Manual